Draft PWS_Cable Reel Stand.docx
DOCX document 31 KB Posted
- Solicitation number
- Not on record
- Issued by
-
Department of the Army
About this file
This document is a Draft Performance Work Statement (PWS) for a Stationary Cable Reel Stand. The PWS defines the minimum requirements for a new stationary cable reel stand for the Electronic Fabrication Division, including details for the purchase and key specifications.
The cable reel stand must be a heavy-duty, non-motorized paralleling reel stand capable of supporting and paying out reels up to 48" in diameter, 32" wide, and weighing up to 5,000 pounds. It must have a 1.38" diameter reel shaft with roller bearing support, a 10" mechanical disc brake with tension control, and safety latches. The stand must be fork-liftable and have mounting tabs or holes. The vendor must provide a set of arbor bushings and the overall footprint cannot exceed 64" wide x 48" deep and 48" high. No power or compressed air is required.
The cable reel stand and accessories must meet all current OSHA safety requirements. The contractor must provide two sets of commercial manuals, and delivery is required within 120 days of contract award. The equipment will be warranted for parts and labor for 1 year, with any longer manufacturer warranties passed on to the government.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFI Document_Cable Reel Stand.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
7/1/24
| MINIMUM SPECIFICATION FOR |
| STATIONARY CABLE REEL STAND |
1. Scope
This specification defines the minimum requirements for a new stationary cable reel stand for the Electronic Fabrication Division. This specification includes details for the purchase of the cable reel stand and the accessories defined in this specification. Used or refurbished equipment is NOT acceptable. For the purpose of this specification, the cable reel stand will be referred to as the cable reel stand, reel stand or the stand.
2. Application
The cable reel stand along with its accessories will be used for measuring, coiling and cutting a variety of wire/cable sizes and lengths for wire/cable.
3. Requirements. The cable reel stand shall be a non-motorized paralleling reel stand that meets the following features and capabilities as a minimum:
3.1 Features: The reel stand shall be of heavy duty steel frame construction base for stability such that it can process and support the heavy cable reels without deflection or balance issues.
| - Reel stand shall have a 1.38” diameter reel shaft |
| - Reel stand shall have roller bearing support for the shaft. |
| - Reel stand shall have a minimum of a 10” mechanical disc brake with tension control to prevent reels from paying out uncontrollably. |
| - Reel stand shall have safety latches for the shaft to prevent the shaft from coming off the stand during cable processing efforts. |
| - Reel stand framework/base shall be designed such that it is fork liftable from one location to another. Framework/base shall also have tabs or mounting holes if user determines to anchor stand in one place. |
3.2 Capabilities: The cable reel stand shall be capable of supporting and paying out reels up to 48” in diameter and 32” wide weighing up to 5,000 pounds.
3.3 Accessories The vendor shall provide a set of arbor bushings to include 1.38” x 2” and 1.38” x 3.5” as a minimum.
3. 4 Machine Size: The cable coiling machine shall not require an overall foot print greater than 64” wide x 48”deep and it shall not be greater than 48” high.
3.5 Utilities
The reel stand shall not require power or compressed air.
4. Safety.
The cable reel stand and its accessories shall have all the necessary guarding to meet all current requirements set forth in OSHA General Industry Standards to protect users and by standers from injury from pinch points and moving parts.
5. Documentation.
The contractor shall provide two sets of commercial manuals with the reel stand. This documentation shall be provided at the same time as the stand delivery.
Department of Defense Item Unique Identification Code (DOD IUID) is Not required.
6. Delivery.
Delivery of the reel stand and its accessories shall be within 120 days of contract award.
7. Warranty The equipment furnished under this specification shall be warranted for parts and labor for a period of 1 years from the date of delivery. IN THE CASE OF ANY COMPONENTS OR SUBSYSTEMS WHICH COME WITH A WARRANTY FROM THE MANUFACTURE THAT IS LONGER THAN ONE YEARS, THAT WARRANTY WILL BE PROVIDED TO THE GOVERNMENT WITH THE OTHER REUQIRED DOCUMENTATION. THE EXISTANCE OF WARRANTIES FOR COMPONENTS OR SUBSYSTEMS WHICH HAVE A DURATION OF LONGER THAN ONE YEARS IN NO WAY NEGATES OR DIMINISHES THE RESPONSIBILITY OF THE CONTRACTOR FOR PROVIDING WARRANTY OF THOSE COMPONENTS OR SUBSYSTEMS FOR A PERIOD OF ONE YEARS AFTER THE DATE OF DELIVERY ACCEPTANCE. There shall be single contractor accountability to prevent confusion of responsibility if a problem or breakdown occurs.
File details come from the government source that posted it. Updated .