DRAFT PD.pdf

Rev 3/31/16

PURCHASE DESCRIPTION

1. INTRODUCTION

The Naval Air Systems Command (NAVAIR) Metrology and Calibration (METCAL) Program has a requirement to procure a replenish Keysight equipment. This replenishment is required replace equipment that has lost functionality due to broken and aging components. All the equipment is currently in NAVAIR METCALs inventory and is common of the shelf (COTS).

2. BACKGROUND

The Keysight 11900B & 11903B are adapters used to make connections between RF microwave test equipment. The Keysight 16380A standard capacitor set is used to calibrate LF Impedance Analyzers and Multi-Frequency LCR Meter. The Keysight 85055A & 85057B verification kits are used to calibrate a wide range of network analyzers.

The Keysight 85133F, 85134F and 85135FC17 flexible test port cables are used to make connections between RF Microwave equipment without introducing unnecessary errors. The Keysight 85140B 2.4mm short is used when calibrating directional bridges and other RF Microwave equipment that require references to be set. The Keysight N4690D, N4691DOPTM0F003 & N4693DOPTM0F100 are ECAL modules that are used with the Keysight network analyzers to expand their frequency ranges, improve their accuracies and reliability. The Keysight 8478B Thermistor mount is used to calibrate power sensors, spectrum analyzers and power standards.

3. REQUIREMENTS

The Contractor shall provide the following Brand Name, Keysight Technologies Inc., supplies identified in the table listed below:

QTY

(Each)

PART NUMBER DESCRIPTION

8 11900B Adapter 2.4 mm female to 2.4 mm female 8 11903B Adapter 2.4 mm female to type-N female 1 16380A Standard capacitors set 5 85055A Verification kit, Type-N 50 Ohm 7 85057B Verification kit 2.4 mm 6 85133F Flexible test port cable set, 2.4 mm 8 85134F Flexible test port cable set 8 85135FC17 Flexible cable set 8 85140B 2.4 mm short circuit 8 N4690D ECal module 18 GHz 8 N4691DOPTM0F003 ECal module 26.5 GHz 8 N4693DOPTM0F100 ECal module 50 GHz 9 8478B Coaxial thermistor mount

3.1 Logistic Requirements

3.2.1 Operator/Service Manual (CDRL T001). A Technical manual for the operation and/or service of the system shall be provided in accordance with CDRL T001.

3.2.2 Calibration Certification and/or Certificate of Conformance Reporting (CDRL A001). A calibration certification with calibration data or certificate of conformance shall be provided with each part number in accordance with CDRL A001.

3.2.3 Warranty. The manufacturer shall provide the minimum commercial warranty for the system of at least one (1) calendar year from date of shipment.

3.2.4 Warranty Sticker. Each current system shall have a sticker affixed to the outside of the unit enclosure.

4. DELIVERABLES

CDRL

Number

Title Associated Data Item Description (DID)

T001 Commercial Off-The-Shelf (Cots) Manuals And Associated Supplemental Data

DI-TMSS-80527D

A001 Calibration Certificate/Report DI-QCIC-80798C

5. ACRONYM LIST

ACRONYM DENOTATION

CDRL Contract Data Requirement List COTS Common Off The Shelf DID Data Item Description ICP Instrument Calibration Procedure METCAL Metrology & Calibration NAVAIR Naval Air Systems Command N/A Not Applicable OEM Original Equipment Manufacture QTY Quantity PD Purchase Description TI Test Instrument WAWF Wide Area Workflow

THIS PAGE CONTAINS NECESSARY INFORMATION FOR THE PROCUREMENT ACTION THAT IS

PLACED IN OTHER SECTIONS OF THE CONTRACT

A. PERIOD OF PERFORMANCE / REQUIRED DELIVERY DATES

TBD

B. PLACE OF PERFORMANCE

N/A

C. SHIPPING ADDRESS

D. INSPECTION AND ACCEPTANCE

E. TECHNICAL POINT OF CONTACT