Draft - PD.pdf
PDF 613 KB Posted
- Attached to
- DN Solutions Mynx 6500
- Solicitation number
- N6426726Q5013
About this file
This is a Purchase Description for DN Solutions Mynx 6500 Vertical Machining Centers required by Naval Surface Warfare Center (NSWC) Corona. NSWC Corona requires two DN Solutions Mynx 6500/50 II vertical machining centers configured with 30-position automatic tool changers, 2-speed gear boxes, 30 HP spindles with oil coolers, coolant-through-spindle capabilities, and Fanuc OiMP-IHMI controllers. Each machine must include comprehensive specifications: Meehanite cast iron beds with box-way construction, 50" X 26.4" X 24.6" XYZ travels, 55.1 X 26.4 tables with 2,866 lbs minimum loading capacity, CAT 50 spindles rated to 6,000 RPM, and fully enclosed guarding.
Required deliverables for each machine include tooling kits (Sandvik items), Virtual Gibbs Cam packages, turbo side-discharge chip conveyors (one left, one right), Mistbuster 2000 mist collectors, Renishaw OMP600 spindle probes with 2" calibration rings, pull studs, external air blow systems, auto doors with safety edges, coolant guns, transformers for 480V power, shower coolant systems, Lista tool cabinets, Hippo hoppers, and Renishaw Inspection Plus software. The contractor is responsible for freight from Georgia, rigging into building 376 at Allegany Ballistics Laboratory in Rocket Center, West Virginia, and installation within fourteen days. Additional contractor responsibilities include providing a two-year warranty on parts and labor, documentation (paper manuals and CD-ROM sets), contact service information, and warranty forms. The required delivery date is seven months from order, with DoDAAC Q9004H. Inspection and acceptance criteria, technical point of contact, and other administrative details are listed as "TBD."
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PURCHASE DESCRIPTION
DN Solutions Mynx 6500
1. INTRODUCTION
Naval Surface Warfare Center (NSWC) Corona requires DN Solutions Mynx Model 6500 Vertical Machining Centers.
2. BACKGROUND
Naval Surface Warfare Center (NSWC) Corona requires two (2) DN Solutions Mynx Model 6500 Vertical Machining Centers configured as specified below.
3. REQUIREMENTS
Item Description Qty
0001 DN Solutions Mynx 6500/50 II with 30 Position ATC All Box Ways, 2 Speed Gear Box, 30 HP, Spindle Oil Cooler, Coolant Thru Spindle, Fanuc OiMP – IHMI Controller
0002 Tooling Kits consisting of 3 each of Sandvik items: C8-A390-455-50-100, C8-391-01-80-100A, C8-391-05C-32030M 2
0003 Virtual Gibbs Cam Package 2 0004 Turbo side discharge Chip Conveyor with 48” Evacuation (1 Left, 1 Right) 2 0005 Mistbuster 2000 Units with Stands, Hose, Hardware 2 0006 Renishaw OMP600 Spindle Probe 2 0007 Renishaw Calibration Ring 2” 2 0008 30 PCS Pull Studs 2 0009 External Air Blow 2 0010 Auto Door with Safety Edge 2 0011 Coolant Gun 2 0012 Transformer 2 0013 Shower Coolant 2 0014 Lista Tool Cabinet 2 0015 Hippo Hopper 2 0016 Renishaw Inspection Plus Software 2 0017 Rigging into Plant for both Machines 2 0018 Freight for All Above - Based on Machines Shipping from Georgia 1
**The Machine(s) shall be equipped with the following: Fanuc Oi-Plus Control with tool load monitoring and adaptive federate control, a portable manual pulse generator, shall have a Meehanite cast iron bed, shall be box way type construction, shall be equipped with a geared spindle head and 25/30 HP CAT 50 big plus 6,000 RPM spindle, be equipped with an oil jacket spindle chiller, be equipped with through spindle and external air blow, shall have 50” X 26.4” X 24.6” XYZ travels, shall have a 55.1 X 26.4 table and loading capacity of 2,866 lbs. min, be equipped with a 30 position ATC, be equipped with 30 pcs pull studs with through hole, shall have fully enclosed guarding, be equipped with a Renishaw OMP 600 spindle probe, Inspection Plus Software and 2” calibration ring, be equipped with a coolant wash down gun, be equipped with Shower coolant, be equipped with a Mistbuster 2000 120V with stand mist collector, shall have an LNS Turbo 48“discharge height right side chip conveyor on one machine and an LNS Turbo 48” discharge height left side chip conveyor on the second machine, be equipped with an oil skimmer on the coolant tank, be equipped with a Virtual Gibbs Cam Package, be equipped with a Sandvick Tooling Package, be equipped with a 72”L X 37”H X 30”D butcher block top workbench on wheels that includes (3) Lista cabinets with (3) drawers each as an assembly, be equipped with a 1-yard self-dumping chip hopper on wheels. The contractor shall provide a machine appropriate transformer for 480V incoming power. The contractor will supply 1 set of paper manuals and 1 CD Rom set for programming, operation, maintenance, and parts list of the machine. The contractor will be responsible for shipping the Machine(s) to Allegany Ballistics laboratory in Rocket Center, WV and rigging of the Machine(s) into building 376. The contractor will provide a two-year warranty on parts and labor. The contractor will provide contact service information and warranty forms.
DRAFT
Period of Performance: The period of performance for installation shall not exceed fourteen (14) days. Start date to be coordinated with the customer.
Security Requirements: Contractor shall adhere to current installation security policies.
A. PERIOD OF PERFORMANCE / REQUIRED DELIVERY DATES
B. PLACE OF PERFORMANCE
C. SHIPPING ADDRESS
D. INSPECTION AND ACCEPTANCE
E. TECHNICAL POINT OF CONTACT
RDD: 7 Months from Order
Allegany Ballistics Laboratory in Rocket Center, WV, Building 376.
DoDAAC: Q9004H Allegany Ballistics Laboratory 210 State Route 956 Rocket Center, WV 26726-Building 376
TBD
TBD
DRAFT
File details come from the government source that posted it. Updated .