DRAFT MIL-HDBK-828D.pdf
Military Handbook Rev. D PDF 3 MB Posted
- Attached to
- Draft MIL-HDBK-828D, Range Laser Safety
- Solicitation number
- MIL-HDBK-828D
- Issued by
-
United States Marine Corps
View the file
Other versions and copies of MIL-HDBK-828D
| File | Revision | Posted | Attached to |
|---|---|---|---|
| MIL-HDBK-828C 02.23.17.pdf | Rev. C, Feb 23, 2017 | Range Managers Toolkit | |
| CCF_MIL-HDBK-828.xlsx | Revision not stated | Draft MIL-HDBK-828D, Range Laser Safety |
Who attaches MIL-HDBK-828D
| Agency | Files |
|---|---|
| United States Marine Corps | 3 |
Other files
| File | Type | Posted |
|---|---|---|
| CCF_MIL-HDBK-828.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NOTE: This draft, dated 8 January 2026, prepared by United States Marine Corps, has not been approved and is subject to modification. DO NOT USE PRIOR TO APPROVAL. (Project SAFT-2025-013)
AMSC N/A AREA SAFT
Distribution Statement A. Approved for public release: distribution is unlimited.
MIL-HDBK-828D
DRAFT
SUPERSEDING
MIL-HDBK-828C
31 March 2017
DEPARTMENT OF DEFENSE
HANDBOOK
RANGE LASER SAFETY
This handbook is for guidance only.
Do not cite this document as a requirement.
NOT MEASUREMENT
SENSITIVE
DRAFT DATED 8 JANUARY 2026
ii
FOREWORD
1. This handbook is approved for use by all Departments and Agencies of the Department of Defense.
2. This handbook provides uniform guidance for the safe use of military lasers and laser systems on Department of Defense (DoD) ranges. Each military service has previously established normal procedures for approving laser ranges and has the responsibility to organize, train, and equip their forces. Services will establish a range laser safety program as part of their overall range safety program. This guidance is intended to supplement these procedures and training requirements. It does not replace those procedures nor release individuals from compliance with the requirements of their particular service. The authority for this handbook is the DoD Laser System Safety Working Group (LSSWG) established by DoDI 6055.15, DoD Laser Protection Program for Military Lasers. Guidance for laser systems not addressed here should be obtained from the LSSWG.
3. The aim of this DoD handbook is to establish range safety for the evaluation and control of lasers under military control to reduce to a minimum the hazards to personnel, property, and the environment.
4. The installation commander is responsible for laser range operations while day-to-day operations are managed through the Installation Laser Range Authority.
5. This handbook applies to laser systems with optical radiation emission in the wavelength range of 100 nanometers to 1 millimeter, pulsed and continuous wave systems.
6. This handbook does not apply to medical or laboratory uses, where additional professional review may be needed to establish health and safety controls; other outdoor use is described in ANSI Z136.6, American National Standard for Safe Use of Lasers Outdoors.
7. This handbook applies to all hazard categories or hazard classifications defined by ANSI Z136.1, American National Standard for Safe Use of Lasers, and IEC 60825-1, Safety of Laser Products – Part 1:
Equipment Classification and Requirements.
8. The intent is for this document to provide sufficient guidance for laser system use on a laser range.
9. Comments, suggestions, or questions on this document should be addressed to Marine Corps Systems Command, 2200 Lester Street, Quantico, VA 22134 ATTN: SEAL-SE-STDS or emailed to USMC_STDZ@usmc.mil, with the subject line “Document Comment”. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.dla.mil.
mailto:USMC_STDZ@usmc.mil https://assist.dla.mil/ iii
CONTENTS
PARAGRAPH PAGE
FOREWORD ................................................................................................................................................................ ii
1. SCOPE
1.1 Scope
1.2 Application
2. APPLICABLE PUBLICATIONS
2.1 General
2.2 Government publications
2.2.1 Specifications, standards, and handbooks
2.2.2 Other Government publications
2.3 Non-Government publications
3. DEFINITIONS
3.1 Administrative controls
3.2 Atmospheric attenuation
3.3 Attenuation
3.4 Buffer angle
3.5 Buffer zone
3.6 Controlled area
3.7 Danger zone
3.8 Diffuse reflection
3.9 Engineering controls
3.10 Exclusion zone
3.11 Flash blindness
3.12 Fratricide
3.13 Installation laser range authority
3.14 Institutional laser range authority
3.15 Laser
3.16 Laser beam divergence
3.17 Laser footprint
3.18 Laser-guided weapon
3.19 Laser range
3.20 Laser range certification
3.21 Laser spot size
3.22 Laser spot tracker
3.23 Laser surface danger zone (LSDZ)
3.24 Laser target designator
3.25 Laser training area (LTA)
3.26 Maximum permissible exposure (MPE)
3.27 Milliradian (mrad)
3.28 Night vision goggles/devices
3.29 Nominal hazard zone (NHZ)
3.30 Nominal ocular hazard distance (NOHD)
3.31 Ocular interruption (OI) devices
3.32 Operator-controlled laser
3.33 Optical density
3.34 Optically aided viewing
3.35 Personal protective equipment (PPE)
3.36 Scatter
3.37 Seeker
3.38 Specular reflection
3.39 Spillover
3.40 Standard operating procedure (SOP)
iv
PARAGRAPH PAGE
3.41 Surface danger zone (SDZ)
3.42 Unit laser range authority
3.43 Weapon danger zone (WDZ)
4. ROLES AND RESPONSIBILITIES
4.1 Range operating authority/range commander/institutional laser range authority
4.1.1 Institutional guidance regarding range laser safety
4.1.2 Laser range certification
4.1.3 Laser range hazard analysis
4.2 Installation laser range authority/installation laser safety officer
4.2.1 Operating procedures
4.2.2 Laser training plan
4.2.3 LSDZ
4.2.4 Laser systems
4.2.5 Laser range design
4.2.6 Range laser safety compliance
4.2.7 Laser range certification
4.2.8 Laser briefings and indoctrination
4.2.9 Laser incident investigations
4.3 Unit laser safety authority or unit LSO
4.3.1 Laser training plan
4.3.2 Conduct of range laser safety inspection
4.3.3 Safety brief/pre-mission brief
4.3.4 Laser operations
4.4 Laser safety range review assessor
5. GENERAL LASER SAFETY INFORMATION
5.1 Laser/laser system
5.2 Laser classification
5.3 Laser system applications
5.4 Laser operations
5.5 Laser reflections
5.6 Control measures
6. GENERAL RANGE LASER SAFETY
6.1 Fundamentals
6.2 Laser systems
6.3 Unprotected personnel
6.4 Protected personnel
6.5 Aided viewing
6.6 Night vision devices (NVD)
6.7 Range maintenance
7. LASER TARGET AND LASER TARGET AREA CONSIDERATIONS
7.1 Target types
7.2 Target material and diffuse reflections
7.3 Specular reflection
7.4 Target size
7.5 Target placement
7.6 Target maintenance
8. AIRBORNE LASER OPERATIONS
8.1 Considerations for laser operation
8.2 Laser target designator/seeker
9. DANGER ZONES AND RISK ANALYSIS
9.1 Deterministic
v
9.2 Probabilistic
9.2.1 Probabilistic risk assessment (PRA)
9.2.2 How to apply PRA to range safety
9.2.3 Requirements for a range safety PRA
9.2.4 Range safety analyst’s perspective of PRA
9.2.5 Range safety PRA for outdoor lasing path forward
10. RANGE CERTIFICATION
10.1 Preparation for certification
10.1.1 Certification questionnaire
10.1.2 Scheduling
10.2 Certification process
10.3 Gather and review preliminary data
10.4 Perform preliminary data analysis using software/analysis models
10.5 On-site survey
10.6 Survey analysis
10.7 Report
10.8 Distribution and archiving
11. LASER ACCIDENT/INCIDENT REPORTING
12. NOTES
12.1 Intended use
12.2 Subject term (key word) listing
12.3 References
12.4 International standardization agreement implementation
12.5 Changes from previous issue
APPENDIX A. LASER SAFETY SOP
A.1 SCOPE
A.1.1 Scope
A.2 INSTALLATION LASER RANGE AUTHORITY SOP RESPONSIBILITIES
A.2.1 Laser range SOP
A.3 UNIT SOP RESPONSIBILITIES
A.3.1 Unit laser range SOP
APPENDIX B. EXAMPLE LASER RANGE CERTIFICATION QUESTIONNAIRE
B.1 SCOPE
B.1.1 Scope B.1.2 Laser range pre-survey questionnaire B.1.3 Laser range certification questionnaire B.1.4 Laser range survey report
APPENDIX C. METHODOLOGY FOR RANGE LASER HAZARD EVALUATION
C.1 SCOPE
C.1.1 Scope C.1.2 Methodology
C.2 BACKGROUND
C.2.1 Laser interaction with water surface C.2.2 Underwater use of lasers C.2.3 Lasers directed above the horizon
C.3 INTERACTION WITH THE RCA
C.3.1 Pre-survey questionnaire C.3.2 Range certification authority visit C.3.3 RLSC report results vi
C.3.4 Post-survey/report action items C.3.5 Range changes and events that necessitate consultation with the range certification authority
C.4 OVERVIEW OF THE CALCULATIONS PERFORMED BY THE RCA
C.4.1 Laser spot, buffer, footprint, and angle of incidence (basic geometry)
C.5 BASIC METHODS FOR LSDZ CREATION
C.5.1 Single laser heading C.5.2 Multiple laser headings C.5.3 Unlevel terrain C.5.4 Target on rising terrain or hills behind target (natural backstop) C.5.5 Falling terrain in target area or hills in foreground C.5.6 Vertical buffer far boundary C.5.7 Vertical buffer near boundary C.5.8 Horizontal buffer C.5.9 Minimum safe lasing altitude (MSLA) C.5.10 Airborne laser with target on level ground C.5.11 Aircraft minimum altitude C.5.12 Left and right hand LSDZ C.5.13 Airborne laser with target on sloping ground
C.6 MITIGATIONS
C.7 RLSC REPORTS
C.7.1 Typical considerations
LIST OF TABLES
TABLE PAGE
TABLE I. Laser engagement scenarios TABLE II. Amount of reflectivity TABLE III. Typical buffer angle values for lasers using an alignment device (optics or sights) TABLE C-I. Scenarios TABLE C‐II. Example of safe lasing minimum altitude table
LIST OF FIGURES
FIGURE PAGE
FIGURE 1. Diffuse reflection FIGURE 2. Warning sign FIGURE 3. Restricted airspace FIGURE 4. Specular (mirror-like) reflection from perpendicular surface FIGURE 5. Reflection off curved specular reflector FIGURE 6. Beam divergence FIGURE 7. Example of airborne laser beam reflection FIGURE 8. Atmospheric attenuation FIGURE 9. Line of sight FIGURE 10. Optimal attack zone (top view) FIGURE 11. Optimal attack zone (side view) FIGURE 12. Optimal attack zone (vertical perspective) FIGURE 13. Backscatter FIGURE 14. Spillover FIGURE 15. Target placement to provide offset vii
FIGURE PAGE
FIGURE 16. Laser surface danger zone (LSDZ) FIGURE 17. NOHD with/without viewing optics FIGURE 18. LSDZ without and with backstop FIGURE 19. Effects of backstops FIGURE 20. Buffer zones with backstop FIGURE B-1. Laser range pre-survey questionnaire FIGURE B-2. Laser range certification questionnaire FIGURE B-3. Laser range safety certification report FIGURE C‐1. Laser footprint – side view and top view FIGURE C‐2. Laser footprint – side view and top view with an angle of incidence less than 90 degrees FIGURE C-3. Laser footprint – top view FIGURE C-4. Integrated footprint – bearing 70 to 110 degrees FIGURE C-5. LSDZ – attack from any direction FIGURE C-6. LSDZ with rising terrain FIGURE C-7. Natural backstops to control laser beam FIGURE C-8. Insufficient backstop to control laser beam FIGURE C-9. LSDZ with terrain sloping down when range is less than NOHD FIGURE C-10. LSDZ with terrain sloping down when range is greater than NOHD FIGURE C-11. LSDZ geometry and vertical buffer FIGURE C-12. Calculation of available buffer versus allowed buffer FIGURE C-13. Case 1: FB or NB level with TGT FIGURE C-14. Case 2: rising terrain FIGURE C-15. Case 3: falling terrain FIGURE C-16. Airborne laser buffer geometry – level ground FIGURE C-17. Example laser aircraft flight profile FIGURE C-18. Laser target on sloping terrain FIGURE C‐19. Example of safe lasing minimum altitude graph FIGURE C‐20. Example of large area laser range FIGURE C‐21. Example of range with backstop limited and NOHD limited areas FIGURE C‐22. Example of safe lasing area and flight profile for over land range FIGURE C‐23. Example of safe lasing altitude and surface danger zone graphics
1. SCOPE
1.1 Scope. This handbook contains general and detailed guidance to be followed in evaluating and recommending range laser safety procedures, which are intended to serve as a guide to the safe use of laser systems on military operational training and test ranges. This handbook is for guidance only and cannot be cited as a requirement.
1.2 Application. This handbook applies to all ranges where service approved laser systems are employed, or research and development lasers are being evaluated. The handbook addresses the roles of several levels of authority including institutional, installation, and unit, and subsequent positions of laser safety responsibility within the services.
This document is applicable to all Department of Defense (DoD) member ranges and all DoD laser operations conducted on non-DoD controlled ranges. The guidance in this document does not replace other procedures or release individuals from compliance with the requirements of their particular service.
This document implements information and methodologies in accordance with the North Atlantic Treaty Organization (NATO) Standardization Agreement (STANAG) 3606.
Suggestions for any change, revision, or cancellation of this handbook are to be submitted through the DoD Laser Systems Safety Working Group (LSSWG).
2. APPLICABLE PUBLICATIONS
2.1 General. The publications listed below are not necessarily all of the publications referenced herein, but are those needed to understand the information provided by this handbook.
2.2 Government publications.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein.
INTERNATIONAL STANDARDIZATION AGREEMENTS
ARSP-4 - Laser Safety for Military Use
STANAG 3606 - Laser Safety for Military Use
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-1425 - Safety Design Requirements for Military Lasers and Associated Support Equipment
(Copies of these publications are available online at https://quicksearch.dla.mil/.)
2.2.2 Other Government publications. The following other Government publications form a part of this document to the extent specified herein.
BUREAU OF MEDICINE AND SURGERY (BUMED)
BUMEDINST 6470.23 - Operational Non-Ionizing Radiation Health Protection
(Copies of this publication are available online at www.med.navy.mil.)
CODE OF FEDERAL REGULATIONS (CFR)
21 CFR 1040 - Performance Standards for Light-Emitting Products
(Copies of this publication are available online at www.ecfr.gov.)
DEPARTMENT OF DEFENSE ISSUANCES
DoDI 6055.15 - DoD Laser Protection Program for Military Lasers
(Copies of this publication are available online at www.esd.whs.mil/DD/.)
https://quicksearch.dla.mil/ http://www.med.navy.mil/ http://www.ecfr.gov/ http://www.esd.whs.mil/DD/
DEPARTMENT OF THE NAVY ISSUANCES
OPNAVINST 5100.27/MCO 5104.1 - Navy Laser Hazards Control Program
SECNAVINST 5100.14 - Department of the Navy Laser Protection Program
(Copies of these publications are available online at https://www.secnav.navy.mil/doni/default.aspx.)
FEDERAL AVIATION ADMINISTRATION (FAA)
FAA Order 7930.2 - Notice to Airmen (NOTAM)
(Copies of this publication are available online at www.faa.gov.)
JOINT CHIEFS OF STAFF
Joint Publication (JP) 3-09.3 - Close Air Support
(Copies of this publication are available online at https://www.jcs.mil/.)
US AIR FORCE PUBLICATIONS
AFMAN 13-212V1 - Range Planning and Operations
AFI 48-139 - Laser and Optical Radiation Protection Program
AFI 91-401 - Directed Energy System Safety
(Copies of these publications are available online at http://www.e-publishing.af.mil.)
US ARMY PUBLICATIONS
AR 40-5 - Army Public Health Program
AR 385-10 - The Army Safety and Occupation Health Program
AR 385-63 - Range Safety
DA PAM 385-10 - Army Safety and Occupational Health Program Procedures
DA PAM 385-40 - Army Mishap Investigations and Reporting
TB MED 524 - Occupational and Environmental Health: Control of Hazards to Health from Laser Radiation
(Copies of these publications are available online at http://www.apd.army.mil.)
US NAVY/MARINE CORPS PUBLICATIONS
MCO 3550.9 - Operational Training Range Certification/Recertification Program
MCO P3550.10 - Policies and Procedures for Range and Training Area (RTA) Management
MCO 3570.1 - Range Safety
(Copies of these publications are available online at https://www.marines.mil/News/Publications/.)
2.3 Non-Government publications. The following publications form a part of this document to the extent specified herein.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI Z136.1 - American National Standard for Safe Use of Lasers
ANSI Z136.6 - American National Standard Safe Use of Lasers Outdoors
(Copies of these publications are available online at http://webstore.ansi.org/.)
https://www.secnav.navy.mil/doni/default.aspx http://www.faa.gov/ https://www.jcs.mil/ http://www.e-publishing.af.mil/ http://www.apd.army.mil/ https://www.marines.mil/News/Publications/ http://webstore.ansi.org/
3. DEFINITIONS
The following definitions and terms are used in this handbook. For other definitions associated with laser safety, refer to ANSI Z136.1, American National Standard for Safe Use of Lasers.
3.1 Administrative controls. A category of control measures used to eliminate hazards or reduce the degree of risk to personnel and equipment. Administrative controls reduce risks through specific actions. Administrative controls can be implemented by either local or higher authority.
3.2 Atmospheric attenuation. The reduction of energy of a laser beam due to absorption and scattering along its path by atmospheric conditions, such as smoke, haze, fog, or precipitation.
3.3 Attenuation. The decrease in the energy of any optical radiation beam as it passes through an absorbing or scattering medium, or both.
3.4 Buffer angle. An angle added to the beam divergence or intended laser projection field in order to ensure a protection zone.
3.5 Buffer zone. The volume of space around a propagating laser beam defined by the buffer angle.
3.6 Controlled area. An area of occupancy or activity, where personnel/equipment are subject to control and supervision for the purpose of protection from radiation hazards.
3.7 Danger zone. An area determined by analysis of weapons characteristics and historical patterns to present risk to personnel or equipment within a designated three-dimensional space.
3.8 Diffuse reflection. Reflection from a surface in which the beam is scattered in all directions (for example, a reflection from a rough surface).
3.9 Engineering controls. A category of control measure used to eliminate hazards or reduce the degree of risk to personnel and equipment. Engineering controls use engineering methods to reduce risks by design, material selection, or substitution.
3.10 Exclusion zone. A designated area which aircraft headings should avoid because of the possibility of false target indications caused by atmospheric scatter from the laser beam within short distances from the laser exit port.
An exclusion zone is established as a sector where the apex is at the target and extends equidistant (10 degrees) either side of the target-to-laser designator line. This zone extends vertically to infinity and has a horizontal limit of 20 degrees.
3.11 Flash blindness. A visual impairment during and following exposure to light of extremely high intensity, caused by blooming (saturation) of the retinal pigment, that may last for a few seconds to a few minutes.
3.12 Fratricide. The employment of friendly weapons with the intent to kill the enemy or destroy his equipment and facilities and which results in unforeseen and unintentional death, injury, or damage to friendly personnel or equipment.
3.13 Installation laser range authority. The organization that provides oversight for range laser activities at the installation level for the Navy, Air Force, and Marines is the Installation Range Laser Safety Officer. For the Army it is the Installation Range Control Officer.
3.14 Institutional laser range authority. The organization that provides oversight to range laser activities at the institutional level is the Institutional Range Laser Safety Specialist.
3.15 Laser. A device that emits light (electromagnetic radiation) through a process called stimulated emission.
The term laser is an acronym for Light Amplification by Stimulated Emission of Radiation.
3.16 Laser beam divergence. The full angle increase in diameter of the laser beam with distance from the exit aperture of the laser.
3.17 Laser footprint. The projection of the laser beam on the ground or target area, to include the buffer angle.
3.18 Laser-guided weapon. A weapon that electro-optically seeks reflected laser from a separate designator source to strike a target. The laser is used to guide the munitions to a target. The acquisition device, which is a seeker and guidance kit mounted on the laser-guided weapon, seeks coded laser energy reflected from the target.
3.19 Laser range. A range designated for laser systems use.
3.20 Laser range certification. An approval based on an evaluation process conducted to ensure safety margins are determined to allow for the diverse application of the many lasers that may be used on a range, defining the degree of laser radiation hazard possible and to recommend control measures.
3.21 Laser spot size. The area of a laser beams projection on a target. The laser spot size is a function of beam divergence and the distance from the laser designator to the target.
3.22 Laser spot tracker. A type of laser acquisition device, normally mounted on fixed-wing or rotary wing aircraft, used to aid visual acquisition of the target to be engaged by another weapon.
3.23 Laser surface danger zone (LSDZ). Designated area where laser radiation levels may exceed maximum permissible exposure levels, thereby requiring control during laser use. Some organizations use this term interchangeably with Nominal Hazard Zone (NHZ), which includes airspace. To minimize confusion in this document, we will refer to LSDZ generally and use NHZ when not specifically referring to surface dangers. The LSDZ is an area where unauthorized personnel and equipment are not permitted, and laser Personal Protective Equipment (PPE) (eye and skin) is required for personnel who may be exposed within this area.
3.24 Laser target designator. A laser used to mark a target or to guide munitions to a target.
3.25 Laser training area (LTA). A training area in which laser systems are used.
3.26 Maximum permissible exposure (MPE). The level of laser radiation to which a person may be exposed without hazardous effect or adverse biological changes in the eye or skin.
3.27 Milliradian (mrad). Unit of angular measure. One mrad equals one thousandth of a radian. One degree equals 17.45 milliradians.
3.28 Night vision goggles/devices. A nonthermal image intensification device used to enhance night vision.
3.29 Nominal hazard zone (NHZ). Describes the space within which the level of the direct, reflected, or scattered radiation may exceed the applicable MPE during normal operation. Exposure levels outside the NHZ are below the applicable MPE level. The NHZ consists of the target area plus the buffer zones. The NHZ is often confined by the application of backstops. For un-terminated direct viewing this zone would extend to the Nominal Ocular Hazard Distance (NOHD).
3.30 Nominal ocular hazard distance (NOHD). NOHD is the distance from an operating laser to the point where the laser irradiance or radiant exposure is not expected to exceed the appropriate MPE. For the purpose of this document, the term NOHD is used generically such that it does not imply the use of or exclusion of magnifying optics. Terms for the hazard distance specifically associated with viewing lasers with magnifying optics include NOHD-M (magnified) and Extended Nominal Ocular Hazard Distance (ENOHD).
3.31 Ocular interruption (OI) devices. Laser systems that are used to intentionally illuminate the eyes of an individual(s) to provide a warning to them. Fielded as a non-lethal device to be used as part of the escalation of force procedures with vehicle checkpoints, entry control points, perimeter security, and convoys.
3.32 Operator-controlled laser. A laser with sufficiently short NOHD (approximately 100 meters unaided viewing and 700 meters for optically aided viewing) that the operator can effectively mitigate the hazard by controlling the use of the laser without the requirements of other control measures typically associated with higher classed laser systems. The operator is responsible for monitoring the controlled area.
3.33 Optical density. The amount of laser protection afforded by a particular eye protection for a particular laser wavelength.
3.34 Optically aided viewing. Viewing of lasers using an optical magnifier, such as binoculars or a scope.
3.35 Personal protective equipment (PPE). Control measures used to protect personnel from the hazardous effects (eye and skin hazards) of lasers. PPE include goggles and spectacles to protect the eyes, and clothing and gloves to protect the skin.
3.36 Scatter. An effect caused by a laser beam reflecting off of particles in the air. Scatter is most pronounced at small distances from the laser source.
3.37 Seeker. Laser acquisition device: it identifies laser designated targets so they can be engaged with a ground, airborne, or naval weapon.
3.38 Specular reflection. A reflection of a laser beam off smooth mirror-like surface causing the beam to remain coherent upon leaving the surface.
3.39 Spillover. Spillover occurs when part of the laser spot misses the intended target. This can be also termed underspill (in front of target) or overspill (beyond the target).
3.40 Standard operating procedure (SOP). Formal written description of the safety and administrative procedures to be followed in performing a specific task.
3.41 Surface danger zone (SDZ). The ground and airspace designated within the training complex (to include associated safety areas) for vertical and lateral containment of projectiles, fragments, debris, and components resulting from the firing, launching, or detonation of weapon systems, to include explosives and demolitions.
3.42 Unit laser range authority. The organization that provides oversight to range laser activities at the unit level for the Navy, Air Force, and Marines is the Unit Laser Safety Officer. For the Army it is the Laser Range Safety Officer.
3.43 Weapon danger zone (WDZ). The ground and airspace for lateral and vertical containment of projectiles, fragments, debris, and components resulting from the firing, launching, and detonation of aviation-delivered ordnance. It reflects the minimum land and air requirement, to include terrain mitigation, needed to safely employ a given weapon. This zone accounts for inaccuracy, failures, ricochets, and broaching/purposing of a specific weapon/munitions type delivered by a specific aircraft type. The WDZ “footprint” is based on the specific weapon characteristics, type of delivery being executed, the type of platform (aircraft) delivering the ordnance, and level of containment acceptable to the installation commander.
4. ROLES AND RESPONSIBILITIES
4.1 Range operating authority/range commander/institutional laser range authority.
4.1.1 Institutional guidance regarding range laser safety. The Institutional Laser Range Authority provides institutional guidance to installations via service-specific regulations. The Institutional Laser Range Authority is responsible for maintaining publications relating to laser use on ranges and establishing, or recommending, the requirements for training programs. If there are questions regarding range laser safety and certification, they should be directed to the Institutional Laser Range Authority.
4.1.2 Laser range certification. When empowered, the Institutional Laser Range Authority is responsible for certifying laser ranges. A laser range certification provides recommendations for the safe use of specific lasers and laser activities. The Institutional Laser Range Authority should:
a. Review the laser systems to be employed.
b. Verify range boundaries.
c. Verify laser firing and target area, line, or points.
d. Verify laser target condition.
e. Verify Laser Surface Danger Zones (LSDZ).
f. Determine if safe laser activities can be supported.
g. Ensure the LSDZ is contained within an area of control.
h. Ensure geospatial (GIS) data sets supporting the Certification are in DoD compliant format.
i. Determine encroachment or conflict issues.
j. Review access control measures.
k. Verify compliance of Standard Operating Procedures (SOP) and proposed operations.
l. Validate Personal Protective Equipment (PPE) Program.
4.1.3 Laser range hazard analysis. The Institutional Laser Range Authority is responsible for conducting laser range hazard analysis and for generating laser danger zones. The Institutional Laser Range Authority is responsible for maintaining its methods and, if necessary, automated software tools for generating danger zones. The Institutional Laser Range Authority should:
a. Determine buffer angle.
b. Validate laser firing area/line/points.
c. Validate laser target area/line/points/area offset.
d. Validate location of laser target area/line/points.
e. Validate magnetic declination.
f. Generate calculations for LSDZ.
g. Generate flight profiles, if applicable.
h. Capture area with digital pictures or video for report.
i Create GIS data holding of Laser Range Certification features.
j. Summarize hazard analysis findings and recommendations.
4.2 Installation laser range authority/installation laser safety officer.
4.2.1 Operating procedures. The Installation Laser Range Authority is responsible for maintaining operating procedures pertaining to installation range laser safety. To ensure proper control of hazardous laser radiation, the Installation Laser Range Authority should institute the following:
a. Publish and enforce safety instructions for the safe use of lasers at their range(s). Ensure that written procedures exist to minimize laser radiation hazards and other laser related range hazards, such as engaging on the laser target designator and wrong targets.
b. Regulations should be developed, or updated as necessary, to account for new laser systems and scenarios.
The laser range certification should be used to review and to ensure overall laser range safety regulations are current.
c. Ensure operating procedures for specific laser systems inform laser users of the potential hazards from the laser systems under their control during laser operation. Checklists for evaluating SOPs are provided in Appendix B. The Installation Laser Range Authority should require users to adhere to range SOPs for all laser range training operations.
d. Keep records of the date, start and stop time for lasing periods, and type of laser or other appropriate information for each laser operation in the laser firing log.
e. Ensure a range Laser Safety Officer (LSO) is assigned to be responsible for ensuring appropriate safety control measures are followed.
f. Through proper management of operating procedures, the Installation Laser Range Authority should ensure the following are acknowledged to ensure currency and to mitigate risk:
(1) Range-approved or Laser Systems Review Board (LSRB) (service specific approved) laser systems.
(2) Laser range certification criteria.
(3) Range laser operations.
(4) Range laser and target maintenance procedures.
(5) Laser hazard control measures.
(6) Emergency response procedures.
(7) PPE.
(8) Communications.
(9) Notices (Airmen, Mariners, Federal Aviation Administration [FAA]).
(10) Agency Notifications - Memorandums of Agreement (MOA) or Memorandums of Understanding
(MOU).
(11) Request for authorization for above the horizon lasing from the Laser Clearinghouse (LCH).
(12) Target maintenance program.
4.2.2 Laser training plan. The Installation Laser Range Authority reviews laser training plans as part of the approval process. This focus is on verifying the information to ensure the range supports the execution of the training plan in a safe manner. In addition, the Installation Laser Range Authority reviews the risk management proposal, as necessary, and identifies revisions to the training plan to ensure compliance with safety and operational procedures and policies. The Installation Laser Range Authority should assist units, as necessary, in developing a plan that will meet training objectives. As part of this review, the Installation Laser Range Authority should review/determine the following data points within the laser training plan. Note that service-specific guidance will dictate whether the Installation Laser Range Authority “reviews” or “determines” the following data points:
a. Laser system is approved.
b. Laser use is constrained within the limits of the LSDZ.
c. Ground personnel locations to ensure those requiring PPE are identified.
d. Hazard area clearance procedures for unprotected personnel and equipment.
e. Control measures for ensuring personnel and equipment remain clear of the LSDZ.
f. Laser output power to ensure it is in compliance with local SOP.
g. Targets, laser firing area/line/points, orbit points, and laser to target orientation to ensure they can be supported by the laser system and the range.
h. PPE requirements to ensure they support the laser.
i. Training mode or filter requirements.
j. Emergency response procedures.
k. Public and agency notifications.
4.2.3 LSDZ.
a. Installation Laser Range Authority personnel may generate LSDZs, as necessary, to support training plans, map data, and information requests.
b. The generated LSDZ will be contained within the certified laser range. This effort considers the laser system data and range data, and performing risk mitigation to ensure the laser training can be safely conducted on a given range.
4.2.4 Laser systems. The Installation Laser Range Authority is responsible for reviewing laser systems for use on a certified laser range. This includes verifying the system falls within the current certification for that range. The Installation Laser Range Authority should:
a. Review range specifications and certification.
b. Review training plans including tactics, laser firing area/line/points, LSDZ, and laser target area.
c. Review laser specifications.
d. Compare characteristics of laser systems already authorized for use on the range with the new laser system.
e. Compare laser specifications with maximum supportable buffer angles on the range.
f. Compare the nominal ocular hazard distance (NOHD) of the laser with range specifications and intended training activities.
g. Determine if the laser system exceeds or falls within current range certification.
h. Recommend approval or disapproval of the use of the laser system on the range.
4.2.5 Laser range design. When new ranges requiring laser operations are considered, the Installation Laser Range Authority provides input to the design of the range cognizant of technical requirements. The Installation Laser Range Authority should review training requirements and tactics and should:
a. Conduct site analysis to determine range design requirements.
b. Recommend whether an existing range can be modified or a new range needs to be established to meet the training/testing requirement.
c. Perform risk assessment to determine potential hazards.
d. Provide technical guidance on range design to support safety, mission, and environmental requirements.
e. Provide technical guidance on construction requirements.
f. Consult the Institutional Laser Range Authority.
4.2.6 Range laser safety compliance. The Installation Laser Range Authority should perform range laser safety compliance inspection or audits:
a. Confirm laser use is compliant with applicable SOP and laser range safety certification report.
b. Verify the existence and placement of range boundary warning signs.
c. Inspect targets for serviceable condition and placement/orientation and ensure proper target maintenance.
d. Verify accessibility, condition, height, and coordinates of ground laser system firing area/line/points.
e. Inspect line of sight between laser firing position and targets.
f. Verify the condition and height of the backstop, as applicable.
g. Verify there are no specular reflectors in the Laser Target Area (LTA).
h. Inspect the range for state of maintenance.
i. Provide inspection/audit results to the range laser certifying authority
j. Verify authorized laser system listing is indicative of actual systems used and is current.
4.2.7 Laser range certification. The Installation Laser Range Authority accepts responsibility for the laser range certification as performed by the Institutional Laser Range Authority. The Installation Laser Range Authority assists the range certifying authority in performing range certification for the safe use of lasers. Certifications should consider, but not be limited to, the extent of range boundaries, required warning signs, number and location of non-removable specular reflectors, access control, airspace restrictions, local operating procedures, and environmental conditions or restrictions. The Installation Laser Range Authority should:
a. Review the laser systems to be employed.
b. Identify range boundaries.
c. Identify airspace restrictions.
d. Identify laser firing area/line points.
e. Identify laser target area/line points.
f. Identify LSDZ limitations.
g. Provide a digital range map.
h. Identify points of interest (towers, structures, etc.).
i. Identify encroachment/conflict issues.
j. Provide target replacement and maintenance.
4.2.8 Laser briefings and indoctrination.
a. Public notices - The Installation Laser Range Authority advises the affected public of the presence of laser operations, where deemed appropriate.
b. Affected users - The Installation Laser Range Authority provides laser briefings and indoctrinations in accordance with service-specific guidance. Laser indoctrination should be provided at the same time as the basic weapons systems instruction. The indoctrination should be at the user level avoiding complex scientific data or terminology. Proper channels for obtaining professional safety and medical assistance should be addressed during indoctrination. In addition to instructions on relevant devices, indoctrination should include:
(1) Principles of laser reflection.
(2) Laser hazards.
(3) Safety standards or operational control procedures of laser systems.
(4) Range laser operations.
(5) Encroachment issue.
(6) Address the National Environmental Protection Act concerns.
4.2.9 Laser incident investigations.
a. Review incident in accordance with local SOP and training plan.
b. Verify that the DoD Laser Safety Event Hotline has been notified of the incident.
c. Provide technical advice on laser capabilities and laser hazard effects.
d. Gather information about the incident.
e. Prepare and submit data for the investigation report.
4.3 Unit laser safety authority or unit LSO.
4.3.1 Laser training plan. The Unit Laser Range Authority is responsible for preparing a laser training plan to submit to the Installation Laser Range Authority for approval to perform laser activities on a specific LTA. As part of preparing a laser training plan, the Unit Laser Range Authority should:
a. Determine laser operations in support of training requirements.
b. Review training to be accomplished against local operating procedures.
c. Select a range whose laser range certification supports the laser system(s) to be used and training exercise to be accomplished.
d. Review laser mode and tactics to be employed to ensure it supports the laser system and range.
e. Identify targets, laser firing area/line/points, laser to target orientation, and orbit points that can be supported by the LSDZ.
f. Identify personnel/equipment locations.
g. Identify range hazard clearing requirements.
h. Identify PPE requirements.
i. Identify communications requirements.
j. Identify emergency response procedures.
k. Present the units laser usage recording practices.
4.3.2 Conduct of range laser safety inspection. The Unit Laser Range Authority should conduct a laser safety inspection of the range and its operations prior to its use to include:
a. Ensure laser warning signs have been posted.
b. Check range conditions (targets/backstop, range boundaries, laser firing area/line/points).
4.3.3 Safety brief/pre-mission brief.
a. Laser systems to be used.
b. Authorized tactics, laser firing positions, laser target orientation, weapons release points, and weapons performance as applicable.
c. Drawings, photographs, descriptions, or grid points of authorized targets.
d. Communication procedures that include specific frequencies (or channels), controlling authorities, and standardized terminology.
e. Acquisitions, identification, and tracking procedures for targets.
f. Missile/ordnance mode of operations.
g. Requirements for beam termination.
h. Control measures to minimize the risk of unauthorized personnel or equipment entering the LSDZ.
i. Run-in headings and flight profiles to be used for airborne laser operations or permissible LSDZ for laser operations.
j. Review of mission profiles to prevent misdirection of laser guided weapons.
k. Type of PPE to be worn and how it should be worn.
l. Potential hazards posed by the laser system, the target area, maintenance area, types of warning signs to be posted, and specific procedures to avoid these hazards.
m. Risk considerations for location of personnel and equipment within the WDZ for observing/lasing the target area to weapons impact.
n. Review the applicable SOP.
4.3.4 Laser operations.
a. Laser systems/targets.
(1) Ensure only service-approved lasers are employed on the range.
(2) Ensure laser systems are at the approved operating position or firing points and always pointed toward the target; verify laser firing area/line/points and laser to target orientation.
(3) Ensure that laser systems are only fired at authorized targets.
(4) Ensure that the target is positively identified in accordance with appropriate safety procedures before operation of a laser system.
b. LSDZ.
(1) Ensure all unprotected personnel and equipment in the immediate area of the laser firing position are outside the LSDZ while the laser is in use.
(2) Ensure LSDZ is clear of all non-essential personnel and equipment.
c. Pre-fire checks - Supervise pre-fire checks. Pre-fire checks that require operation of the laser system may be made in a controlled area with the laser beam terminated by an approved backstop. Pre-fire checks that do not require operation of the laser, but require use of the optics, may be safely made in any area. To operate the optics without firing the laser, follow SOP to ensure power to the laser is turned off.
d. Cease fire operations.
(1) A specular reflection is presented in the target area.
(2) Poor target tracking is observed.
(3) Non-essential personnel and equipment enter the LSDZ.
e. General supervision.
(1) Maintain communication with the laser system operators, Installation Laser Range Authority, and all affected range personnel.
(2) Ensure that the laser system NOHD does not extend beyond controlled boundaries.
(3) Ensure personnel follow safety procedures in accordance with local SOPs.
(4) Ensure training filters or modes are used, as required.
(5) Ensure PPE are being used, as required.
(6) Ensure the approved training plan is followed.
(7) Coordinate emergency response as necessary.
f. Laser incident investigations - The Unit Laser Range Authority should participate in laser incident investigations that occur during their training. The Unit Laser Range Authority should:
(1) Ensure the laser system involved is quarantined.
(2) Report the incident to the Installation Laser Range Authority.
(3) Provide information on training activity/exercise.
(4) Provide information on what happened.
(5) Provide information on personnel who may have been exposed to hazardous laser energy.
4.4 Laser safety range review assessor.
a. The Laser Safety Range Review Assessor (LSRRA) is an independent range review authority with the specialized technical expertise to assess the safe use of lasers on military testing and training ranges.
b. The LSSRA will make assessments based on:
(1) Guidance from DoDI 6055.15, this document, and other laser range evaluation and assessment tools in accordance with military department-specific laser safety program policy and procedures.
(2) Advising the cognizant range use certifying or approving authority regarding hazards, risks, and possible remediation, including appropriate protections, mitigations, and precautions.
5. GENERAL LASER SAFETY INFORMATION
5.1 Laser/laser system.
a. Lasers emit light in a narrow, coherent beam of energy. Due to the increased directional intensity of optical radiation generated by a laser, a concentrated optical beam is present at considerable distances which may present a hazard to personnel and equipment.
b. A laser system is an assembly of electrical, mechanical, optical, and software components which includes a laser. The terms “laser”, “laser system”, and “laser device” are considered equivalent within this document.
5.2 Laser classification. Laser systems are classified according to their relative hazards from Class 1 (least hazardous) to Class 4 (most hazardous), summarized as follows:
a. Class 1 - laser systems pose no hazard under any normal viewing conditions, aided or unaided.
b. Class 1M - laser systems are only hazardous when viewed by magnifying optics.
c. Class 2 - laser systems are low-power visible wavelength lasers which are not considered hazardous for momentary (0.25 second) unintentional exposure because the normal observer will blink or look away before eye damage can occur.
d. Class 2M - laser systems are low-power visible wavelength lasers similar to Class 2 but are hazardous when viewed with magnifying optics even for a momentary exposure.
e. Class 3R - laser systems are considered safe, if handled carefully, with restricted intra-beam viewing.
f. Class 3B - laser systems are powerful and can cause serious eye injury for exposures of very short duration.
They can be hazardous for long distances downrange from the laser system.
g. Class 4 - laser systems are very powerful and the most dangerous laser systems. They can be hazardous for extremely long distances downrange from the laser system. They can also present a potential diffuse reflection viewing hazard as well as a possible skin or fire hazard.
5.3 Laser system applications. Developments in laser technology have resulted in an increase in the use of laser systems for military application. Military lasers are used primarily for target acquisition, target designation, range finding, fire control, Ocular Interruption (OI), directed energy weaponry, and communications.
a. Laser ranging and designation - Laser target ranging, and target designation systems can provide accurate range, azimuth, and elevation information to locate enemy targets. In combination with global positioning system (GPS), lasers can provide accurate enemy target locations. Laser target designators mark targets for engagement.
When within range, the laser designator can be aimed so the energy precisely designates a chosen spot on the target.
b. Laser spot tracker - The laser spot tracker identifies the reflected laser energy from a laser designator off the target and displays the target’s position on a display panel. Unless this is used with a visual verification, an erroneous target could be detected (the laser designator).
c. Laser guided weapons - A laser-guided weapon uses a laser to guide the munition to the target by illuminating the target with coded pulses of laser energy that is diffusely reflected from the target. Some laser-guided weapons require laser target designation before launch / release, during the entire time of flight, or only during the terminal portion of flight.
d. Laser marking - Laser marking involves using a laser to get an individual’s attention (from a distance on the ground or in an aircraft) to point out the location of a target using the laser.
e. OI devices - OI devices should meet stringent safety criteria and be able to deliver a warning effect to targeted personnel by obscuring their vision. The devices currently in use may be Class 3R or greater laser systems that can be employed in training safely, but due to the intensity of the laser beam, it poses an eye hazard within the NOHD if not employed correctly. The laser system should be terminated if exposure distances approach the NOHD of the system (known and briefed prior to use).
5.4 Laser operations. Laser operations involve employment of a laser system to use a weapon, acquire a target for illumination, pointing, target designation, weapon guidance, range-finding, communication, or to provide OI.
These laser systems may be mounted on a platform, a weapon, or they may be hand-held. Laser operations fall into nine different engagement scenarios that are detailed below in table I.
TABLE I. Laser engagement scenarios.
Ground to Ground Air to Ground Ground to Air Air to Air
Ground to Surface Air to Subsurface Subsurface to Ground Subsurface to Air
Subsurface to Subsurface
5.5 Laser reflections. A laser beam reflects off surfaces it encounters. The magnitude of the reflection is dependent upon the power level of that laser, the material surface, and the angle of incidence at which the laser energy strikes the surface. In practice, this is similar to how light striking a surface will reflect at the same angle that it interacts with the surface.
a. Specular - Reflection of a laser beam off smooth surfaces such as a mirror, a still body of water, clean ice, plate glass, or chrome-plated metal produces a type of reflection known as specular reflection. Laser beams reflected off specular surfaces (especially flat specular surfaces) retain much of their collimation and energy, and thus still may be a hazard for a considerable distance.
b. Diffuse - Reflection of a laser beam off rough surfaces. Examples of diffuse reflectors include dry foliage, rock, camouflage, soil, matte paint, aluminum cans, paper, terrain, roadways, and old ordnance. Diffuse targets reflect light and laser energy in a hemispherical pattern centered at the point of impact (see figure 1). A diffuse surface is one that distorts (or diffuses) the beam shape, normally resulting in a safe-to-view reflection from outside the target area. The radiation will scatter in many different directions depending on the angle of incidence. Diffuse surfaces reflect energy in all possible directions including toward the laser. A hazardous diffuse reflection can only be produced by a Class 4 laser system.
FIGURE 1. Diffuse reflection.
5.6 Control measures. The purpose of range laser safety is to prevent injury to both military personnel and the general public from laser radiation, and to ensure that only intended target areas are engaged by the laser. The goal is to accomplish this objective without placing unnecessary restrictions on laser system use. Therefore, control measures should be implemented to manage these risks.
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .