DPC-355257846-SA-2026- STC 0002A NPWCBSD Open Enrollment-RFQualification.pdf
PDF 577 KB Posted
- Attached to
- State Term Contract - Nonprofit Work Center for the Blind and Severely Disabled - 2026 Open Enrollment
- Solicitation number
- Doc2333426861
- Issued by
- Wake County, Teachey Town, North Carolina
About this file
This is a Request for Qualification document issued by the State of North Carolina for the 2026 Open Enrollment Period of State Term Contract (STC) 0002A for the Nonprofit Work Center for the Blind and Severely Disabled. The RFQ establishes the qualification requirements and process for vendors seeking to participate in the state term contract during the 2026 open enrollment period. Qualified vendors must submit responses demonstrating their ability to meet the contract requirements, which focus on services and support for nonprofit work centers serving individuals who are blind and severely disabled. The document outlines the submission procedures, evaluation criteria, and qualification standards that prospective bidders must satisfy to be considered for award or continued participation under this state term contract.
The RFQ specifies the qualification process and documentation requirements necessary for vendors to establish eligibility for the 2026 contract period. Pricing terms, specific funding amounts, and renewal options are to be detailed in the full contract solicitation. This open enrollment period allows both incumbent vendors and new qualified vendors to participate in the state term contract, providing an opportunity for the state to refresh its vendor pool while maintaining continuity of services to the nonprofit work centers. Vendors should carefully review all qualification requirements and ensure complete submission of all required documentation to be considered for participation in this important state purchasing vehicle.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATE OF NORTH CAROLINA
DEPARTMENT OF ADMINISTRATION,
DIVISION OF PURCHASE & CONTRACT
Request for Qualifications #: DPC-355257846-SA-2026
2026 Open Enrollment
Solicitation for Goods and Services Provided by
Nonprofit Work Centers for the Blind and Severely Disabled
Date Issued: 11/9/2026
Quote Due Date: 12/3/2026
At 2:00 PM ET
Direct all inquiries concerning this RFQ to:
Sandy Anderson
State Procurement Manager
E-mail: Sandy.Anderson@doa.nc.gov
Ver. 08/2026
Request for Qualifications #
DPC-355257846-SA-2026
For internal state agency processing, including tabulation of quotes, provide your company’s eVP (Electronic Vendor Portal) Number. Pursuant to G.S. 132-1.10(b) this identification number shall not be released to the public. This page will be removed and shredded, or otherwise kept confidential, before the procurement file is made available for public inspection.
This page shall be filled out and returned with your quote.
Failure to do so may subject your quote to rejection.
Vendor Name
Vendor eVP# Note: For a contract to be awarded to you, your company (you) must be a North Carolina registered Vendor in good standing. You must enter the Vendor number assigned through eVP. If you do not have a Vendor number, register at https://vendor.ncgov.com/vendor/login https://vendor.ncgov.com/vendor/login
Ver: 08/2026 1
EXECUTION
In compliance with this Invitation for Qualifications (RFQ), and subject to all the conditions herein, the undersigned Vendor offers and agrees to furnish and deliver any or all items upon which prices are quoted, at the prices set opposite each item within the time specified herein.
By executing this quote, the undersigned Vendor understands that false certification is a Class I felony and certifies that:
this quote is submitted competitively and without collusion (G.S. 143-54), that none of its officers, directors, or owners of an unincorporated business entity has been convicted of any violations of Chapter 78A of the General Statutes, the Securities Act of 1933, or the Securities Exchange Act of 1934 (G.S. 143-59.2), and it is not an ineligible Vendor as set forth in G.S. 143-59.1.
Furthermore, by executing this quote, the undersigned certifies to the best of Vendor’s knowledge and belief, that:
it and its principals are not presently debarred, suspended, proposed for debarment, declared ineligible or voluntarily excluded from covered transactions by any Federal or State department or agency.
As required by G.S. 143-48.5, the undersigned Vendor certifies that it, and each of its sub-contractors for any Contract awarded as a result of this RFQ, complies with the requirements of Article 2 of Chapter 64 of the NC General Statutes, including the requirement for each employer with more than 25 employees in North Carolina to verify the work authorization of its employees through the federal E-Verify system.
As required by Executive Order 24 (2017), the undersigned Vendor certifies that it will comply with all Federal and State requirements concerning fair employment and that it does not and will not discriminate, harass, or retaliate against any employee in connection with performance of any Contract arising from this solicitation.
G.S. 133-32 and Executive Order 24 (2009) prohibit the offer to, or acceptance by, any State Employee associated with the preparing plans, specifications, estimates for public Contract; or awarding or administering public Contracts; or inspecting or supervising delivery of the public Contract of any gift from anyone with a Contract with the State, or from any person seeking to do business with the State. By execution of this quote response to the RFQ, the undersigned certifies, for Vendor’s entire organization and its employees or agents, that Vendor are not aware that any such gift has been offered, accepted, or promised by any employees or agents of Vendor’s organization.
By executing this quote, Vendor certifies that it has read and agreed to the INSTRUCTIONS TO VENDORS and the NORTH CAROLINA GENERAL TERMS AND CONDITIONS incorporated below. These documents can be accessed from the Ariba Sourcing Tool.
Failure to execute/sign quote prior to submittal may render quote invalid and it MAY BE REJECTED. Late quotes cannot be accepted.
COMPLETE/FORMAL NAME OF VENDOR:
STREET ADDRESS: P.O. BOX: ZIP:
CITY & STATE & ZIP: TELEPHONE NUMBER: TOLL FREE TEL. NO:
PRINCIPAL PLACE OF BUSINESS ADDRESS IF DIFFERENT FROM ABOVE (SEE INSTRUCTIONS TO VENDORS ITEM #21):
PRINT NAME & TITLE OF PERSON SIGNING ON BEHALF OF VENDOR:
VENDOR’S AUTHORIZED SIGNATURE: DATE: E-MAIL:
DEPARTMENT OF ADMINISTRATION – DIVISION OF PURCHASE AND CONTRACT
Statewide Term Contract Refer ALL Inquiries regarding this RFQ to:
All correspondence with vendors shall be through the Ariba Sourcing Tool. Questions will be received in the Ariba Sourcing Tool (only) based on the schedule in Section 2.4
Request for Qualifications #: DPC-355257846-SA-2026 Quotes will be publicly opened: 12/3/2026 @ 2:00 PM ET
For Statewide Use of All State Entities Commodity # and Description: All Non-IT Goods and Services STC #: 0002A for Non-Profit Work Centers for the Blind and
Severely Disabled (NPWCBSD)
Quote Number: DPC-355257846-SA-2026 Vendor: ____________________________________
Ver: 08/2026 2
FOR STATE USE ONLY: Offer accepted and Contract awarded on date of _____________________ as indicated, by _____________________________________________________________________.
(Authorized Representative of Department of Administration, Division of Purchase & Contract)
VALIDITY PERIOD
Offer shall be valid for at least 120 days from date of quote opening, unless otherwise stated here: ______ days, or if extended by mutual agreement in writing of the parties. Any withdrawal of this offer shall be made in writing, effective upon receipt by the agency issuing this
RFQ.
QUOTE ACCEPTANCE
If your quote is accepted, all provisions of this RFQ, along with the written results of any negotiations, shall constitute the written agreement between the parties (“Contract”). The NORTH CAROLINA GENERAL TERMS AND CONDITIONS are incorporated herein and shall apply.
Depending upon the Goods or Services being offered, other terms and conditions may apply, as mutually agreed.
by
Quote Number: DPC-355257846-SA-2026 Vendor: ____________________________________
Ver: 08/2026 3
TABLE OF CONTENTS
1.0 PURPOSE AND BACKGROUND
1.1 CONTRACT TERM
2.0 GENERAL INFORMATION
2.1 REQUEST FOR QUALIFICATIONS DOCUMENT
2.2 E-PROCUREMENT FEE
2.3 NOTICE TO VENDORS REGARDING RFQ TERMS AND CONDITIONS
2.4 RFQ SCHEDULE
2.5 SOLICITATION QUESTIONS
2.6 RESPONSE SUBMITTAL
2.7 RESPONSE CONTENTS
2.8 ALTERNATE QUOTES
2.9 DEFINITIONS, ACRONYMS, AND ABBREVIATIONS
3.0 METHOD OF AWARD AND QUOTE EVALUATION PROCESS
3.1 METHOD OF AWARD
3.2 CONFIDENTIALITY AND PROHIBITED COMMUNICATIONS DURING EVALUATION
3.3 EVALUATION PROCESS
3.4 PERFORMANCE OUTSIDE THE UNITED STATES
3.5 INTERPRETATION OF TERMS AND PHRASES
4.0 REQUIREMENTS
4.1 PRICING
4.2 ADDITIONAL SAVINGS OFFERS/REBATES
4.3 TRANSPORTATION AND IDENTIFICATION
4.4 DELIVERY AND INSTALLATION
4.5 OTHER SERVICES
4.6 RETURN/RESTOCKING POLICY
4.7 DEFECTIVE PRODUCTS
4.8 PRODUCT RECALL
4.9 OUT-OF-STOCK AND BACK-ORDERS
4.10 QUALITY ACCEPTANCE INSPECTION
4.11 AUTHORIZED RESELLER
4.12 AUTHORIZED DEALERS
4.13 WARRANTY
4.14 DESCRIPTIVE LITERATURE
4.15 REFERENCES
4.16 SUSTAINABILITY EFFORTS
4.17 RETURN POLICY
4.18 PRODUCT SAFETY LISTING
4.19 VENDOR’S REPRESENTATIONS
4.20 INSURANCE REQUIREMENTS MODIFICATION
4.21 SECRETARY OF STATE REGISTRATION
4.22 SUBCONTRACTOR
5.0 SCOPE OF WORK AND SPECIFICATIONS
Quote Number: DPC-355257846-SA-2026 Vendor: ____________________________________
Ver: 08/2026 4
GENERAL
IMPLEMENTATION AND COMMUNICATION PLAN
CUSTOMER SERVICES
CERTIFICATION AND SAFETY LABELS
6.0 CONTRACT ADMINISTRATION
6.1 CONTRACT MANAGER AND CUSTOMER SERVICE
6.2 ELECTRONIC PRODUCT CATALOG
6.3 CONTRACT BUSINESS REVIEW MEETINGS
6.4 CONTINUOUS IMPROVEMENT
6.5 PERIODIC QUARTERLY SPEND REPORTS
6.6 ACCEPTANCE OF WORK
6.7 INVOICES
6.8 DISPUTE RESOLUTION
6.9 POST AWARD PRODUCT SUBSTITUTION, ADDITIONS, & REMOVALS
6.10 PRICE ADJUSTMENTS
6.11 CONTRACT CHANGES
6.12 TAXES
6.13 ATTACHMENTS
7.0 OPEN ENROLLMENT
7.1 FREQUENCY
7.2 VENDOR OPTIONS
Quote Number: DPC-355257846-SA-2026 Vendor: ____________________________________
Ver: 08/2026 5
1.0 PURPOSE AND BACKGROUND
The Department of Administration (DOA) serves as the business manager for North Carolina State government and provides leadership for the effective, efficient, economical, and equitable delivery of services to the public. The Department also administers several advocacy programs that serve diverse segments of the State’s population that have traditionally been underserved. The Division of Purchase & Contract (P&C) provides State entities with a portfolio of Statewide Term Contracts (STCs) that pool purchasing needs and resources to acquire goods and services efficiently.
The purpose of this Request for Qualifications (RFQ) is to conduct the annual canvassing of Non-Profit Work Centers for the Blind and Severely Disabled (NPWCBSDs) to determine their qualifications to participate in the Statewide Term Contract (STC) for providing non-IT goods and services to State Agencies, Public Universities, Community Colleges, and Other Eligible Entities in accordance with N.C.G.S. § 143-129.5.
N.C.G.S. § 143-48(1b) defines a “nonprofit work center for the blind and the severely disabled” as an agency that:
1. Is organized under the laws of the United States or this State, operates in the interest of the blind and the severely disabled, and has no net income that inures in whole or in part to the benefit of any shareholder or other individual;
2. Complies with any applicable health and safety standard prescribed by the United States Secretary of Labor; and
3. In the production of commodities or provision of services, employs during the current fiscal year severely handicapped individuals for: (i) a minimum of seventy-five percent (75%) of the hours of direct labor required for the production of commodities or provision of services; or (ii) the percentage of direct labor required under Public Law 92-28 (41 U.S.C.
§ 46 et seq.), whichever is less.
This RFQ encompasses non-IT goods and services offered by qualified NPWCBSDs. Vendors may propose the goods and services they are capable of providing, along with applicable descriptions, pricing, delivery information, warranties, and supporting documentation. Approved offerings will be incorporated into the resulting STC and made available in accordance with the purchasing priority described below.
Consistent with Governor Cooper’s Executive Order 80, North Carolina’s Commitment to Address Climate Change and Transition to a Clean Energy Economy, Vendors shall identify applicable sustainability features that are consistent with industry standards and complete Attachment: Sustainability Efforts.
The intent of this RFQ is to obtain pricing that offers savings to the State and to confirm, through each Vendor’s response, its ability to meet the State’s needs.
Any Contract resulting from this RFQ is mandatory for State Departments, most State Agencies, and State higher education institutions, except under the conditions specified in N.C.G.S. § 115D-58.14(a) and N.C.G.S. § 116-13. The Contract may also be utilized, without further competition, by non-mandatory State Agencies and Other Eligible Entities.
Goods and services included in a Contract resulting from this solicitation will receive ordering priority to the extent that those goods and services are not otherwise provided by Correction Enterprises or an existing STC. If a good or service awarded to an NPWCBSD Vendor is already available through Correction Enterprises or an existing STC, it may be ordered under this Contract as a secondary option when the primary source cannot provide the required good or service. For each occurrence, the State Entity shall document that Correction Enterprises or the applicable STC Vendor was unable to provide the required good or service. If the good or service is not available through an existing STC, the ordering priority will be Correction Enterprises followed by awarded NPWCBSD Vendors.
NPWCBSDs currently awarded under Statewide Term Contract 0002A do not need to respond to this solicitation to remain on the Contract.
Quote Number: DPC-355257846-SA-2026 Vendor: ____________________________________
Ver: 08/2026 6
Responses shall be submitted in accordance with the terms and conditions of this RFQ and any addenda issued hereto.
The intent of this solicitation is to award Statewide Term Contract.
1.1 CONTRACT TERM
The Contract shall have an indefinite term, beginning upon execution (the “Effective Date”) and continue until the relative law is no longer in effect.
Quotes shall be submitted in accordance with the terms and conditions of this RFQ and any addenda issued hereto.
2.0 GENERAL INFORMATION
2.1 REQUEST FOR QUALIFICATIONS DOCUMENT
The RFQ is comprised of the base RFQ document, any attachments, and any addenda released before Contract award, which are incorporated herein by reference.
2.2 E-PROCUREMENT FEE
ATTENTION: This is an NC eProcurement solicitation facilitated by the Ariba Network. The E-Procurement fee may apply to this solicitation. See paragraph entitled ELECTRONIC PROCUREMENT of the North Carolina General Terms and Conditions.
General information on the E-Procurement Services can be found at: http://eprocurement.nc.gov/.
What is the Ariba Network?
The Ariba Network is a web-based platform that serves as a connection point for buyers and vendors. Vendors can log in to the Ariba Network to view purchase orders, respond to electronic requests for quotes, participate in Sourcing Events, and collaborate with buyers on contract documents.
For training on how to use the Sourcing Tool to view solicitations, submit questions, develop responses, upload documents, and submit offers to the State, Vendors should go to the following site:
http://eprocurement.nc.gov/training/vendor-training.
2.3 NOTICE TO VENDORS REGARDING RFQ TERMS AND CONDITIONS
It shall be the Vendor’s responsibility to read the Instructions to Vendors, the North Carolina General Terms and Conditions, all relevant exhibits and attachments, and any other components made a part of this RFQ and comply with all requirements and specifications herein. Vendors also are responsible for obtaining and complying with all Addenda and other changes that may be issued in connection with this RFQ.
If Vendors have questions, or issues regarding any component within this RFQ, those must be submitted as questions in accordance with the instructions in the SOLICITATION QUESTIONS Section. If the State determines that any changes will be made as a result of the questions asked, then such decisions will be communicated in the form of an RFQ addendum. The State may also elect to leave open the possibility for later negotiation and amendment of specific provisions of the Contract that have been addressed during the question-and-answer period.
Other than through the process of negotiations under 01 NCAC 05B.0503, the State rejects and will not be required to evaluate or consider any additional or modified terms and conditions submitted with Vendor’s quote. This applies to any language appearing in or attached to the document as part of the Vendor’s quote that purports to vary any terms and conditions or Vendors’ instructions herein or to render the quote non-binding or subject to further negotiation. Vendor’s quote shall constitute a firm offer that shall be held open for the period required herein (“Validity Period” above).
http://eprocurement.nc.gov/
Quote Number: DPC-355257846-SA-2026 Vendor: ____________________________________
Ver: 08/2026 7
The State may exercise its discretion to consider Vendor proposed modifications. By execution and delivery of this RFQ Response, the Vendor agrees that any additional or modified terms and conditions, whether submitted purposely or inadvertently, shall have no force or effect, and will be disregarded unless expressly agreed to during negotiations and incorporated by way of a Best and Final Offer (BAFO). Noncompliance with, or any attempt to alter or delete, this paragraph shall constitute sufficient grounds to reject Vendor’s quote as nonresponsive.
2.4 RFQ SCHEDULE
The table below shows the intended schedule for this RFQ. The State will make every effort to adhere to this schedule.
Event Responsibility Date and Time
Issue RFQ State 11/9/26 Submit Written Questions Vendor 11/18/26 Provide Responses to Questions State 11/23/26 Submit Quotes Vendor 12/3/26 at 2:00 PM ET
Virtual Response Opening can be accessed here: Join the meeting here
2.5 SOLICITATION QUESTIONS
Upon review of the RFQ documents, Vendors may have questions to clarify or interpret the RFQ in order to submit the best quote possible. To accommodate the Quote Questions process, Vendors shall submit any such questions by the “Submit Written Questions” date and time provided in the RFQ SCHEDULE Section above, unless modified by Addendum.
Questions related to the content of the solicitation, or the procurement process should be directed to the person on the title page of this document via the Sourcing Tool's message board by the date and time specified in the RFQ SCHEDULE Section of this RFQ. Vendors will enter “RFQ # DPC-355257846-SA-2026– Questions” as the subject of the message. Question submittals should include a reference to the applicable RFQ section. This is the only manner in which questions will be received.
Questions or issues related to using the Sourcing Tool itself can be directed to the North Carolina eProcurement Help Desk at 888-211-7440, Option 2. Help Desk representatives are available Monday through Friday from 7:30 AM ET to 5:00 PM EST.
Questions received prior to the submission deadline date, the State’s response, and any additional terms deemed necessary by the State will be posted in the Sourcing Tool in the form of an addendum and shall become an Addendum to this RFQ. No information, instruction or advice provided orally or informally by any State personnel, whether made in response to a question or otherwise in connection with this RFQ, shall be considered authoritative or binding. Vendors shall rely only on written material contained in an Addendum to this RFQ.
2.6 RESPONSE SUBMITTAL
IMPORTANT NOTE: This is an absolute requirement. Late quotes, regardless of cause, will not be opened or considered, and will be automatically disqualified from further consideration. Vendor shall bear the sole risk of late submission due to unintended or unanticipated delay. It is the Vendor’s sole responsibility to ensure its quote has been received as described in this RFQ by the specified time and date of opening. Failure to submit a quote in strict accordance with instructions provided shall constitute sufficient cause to reject a Vendor’s quote(s). Solicitation responses are subject to Sealed Bidding requirements.
Vendor’s quotes for this procurement must be submitted through the Sourcing Tool. For training on how to use the Sourcing Tool to view solicitations, submit questions, develop responses, upload documents, and submit offers to the State, Vendors should go to the following site: https://eprocurement.nc.gov/training/vendor-training.
https://teams.microsoft.com/meet/2293346271253359?p=LmoUY26LwaYtZuw1et https://eprocurement.nc.gov/training/vendor-training
Quote Number: DPC-355257846-SA-2026 Vendor: ____________________________________
Ver: 08/2026 8
Questions or issues related to using the Sourcing Tool itself can be directed to the North Carolina eProcurement Help Desk at 888-211-7440, Option 2. Help Desk representatives are available Monday through Friday from 7:30 AM EST to 5:00 PM ET.
Tips for Using the Sourcing Tool
1. Vendors should review available training and confirm that they are able to access the Sourcing Event, enter responses, and upload files well in advance of the date and time responses are due to allow sufficient time to seek assistance from the North Carolina eProcurement Help Desk.
2. Vendors may submit their responses early to make sure there are no issues, and then submit a revised response any time prior to the response due date and time. The State will only review the most recent response.
3. Vendors should respond to all relevant sections of the Sourcing Event. Certain questions or items are required in order to submit a response and are denoted with an asterisk. The Sourcing Tool will not allow a response to be submitted unless all required items are completed. The Sourcing Tool will provide error messages to help identify any required information that is missing when response is submitted.
4. Simply saving your response in the Sourcing Tool is not the same as submitting your response to the State. Vendors should make sure they complete the submission process and receive a message that their response was successfully submitted.
5. Only Quotes submitted through the Content Section of the Ariba Sourcing Event will be considered. Quotes submitted through the Message Board will not be accepted or considered for award.
If confidential and proprietary information is included in the quote, also submit one (1) signed, REDACTED copy of the quote.
Such information may include trade secrets defined by N.C. Gen. Stat. § 66-152 and other information exempted from the Public Records Act pursuant to N.C. Gen. Stat. §132- 1.2. Vendor may designate information, Products, Services, or appropriate portions of its response as confidential, consistent with and to the extent permitted under the statutes and rules set forth above. By so redacting any page, or portion of a page, the Vendor warrants that it has formed a good faith opinion, having received such necessary or proper review by counsel and other knowledgeable advisors, that the portions determined to be confidential and proprietary and redacted as such, meet the requirements of the Rules and Statutes set forth above. However, under no circumstances shall price information be designated as confidential.
If the Vendor does not provide a redacted version of the quote with its quote submission, the Department may release an unredacted version if a record request is received.
2.7 RESPONSE CONTENTS
Vendors shall provide responses to all questions and complete all attachments for this RFQ that require the Vendor to provide information and upload them to the Sourcing Event in the Sourcing Tool. Vendor may not be able to submit its response in the Sourcing Tool unless all required items are addressed. Vendors shall provide authorized signatures where requested. Failure to provide all required items, or Vendor’s submission of incomplete items, may result in the State rejecting Vendor’s quote, in the State’s sole discretion.
Vendors shall upload the following items and attachments in the Sourcing Tool:
a) Completed and signed version of EXECUTION PAGES, along with the body of the RFQ.
b) Signed receipt pages of any addenda released in conjunction with this RFQ, if required to be returned.
c) Vendor Response (Sections 4.11–4.16, 4.21–4.22, 5.1–5.3, 6.1, and 6.2, as applicable, including all requested narratives, selections, supporting documentation, and conditional disclosures.
d) Completed version of ATTACHMENT: PRICING CATALOG
e) Completed and signed version of ATTACHMENT: CUSTOMER REFERENCE FORM
Quote Number: DPC-355257846-SA-2026 Vendor: ____________________________________
Ver: 08/2026 9
f) Completed and signed version of ATTACHMENT: LOCATION OF WORKERS UTILIZED BY VENDOR
g) Completed version of ATTACHMENT: SUSTAINABILITY EFFORTS
h) Completed and signed version of CERTIFICATION OF NON-PROFIT WORK CENTER FOR THE BLIND AND SEVERELY
DISABLED
2.8 ALTERNATE QUOTES
Unless provided otherwise in this RFQ, Vendor may submit alternate quotes for comparable Goods, various methods or levels of Service(s), or that propose different options. Alternate quotes must specifically identify the RFQ requirements and advantage(s) addressed by the alternate quote. Each quote must be for a specific set of Goods and must include specific pricing.
Each quote must be complete and independent of other quotes offered. If a Vendor chooses to respond with various offerings, Vendor shall follow the specific instructions for uploading Alternate Quotes in the Sourcing Tool.
2.9 DEFINITIONS, ACRONYMS, AND ABBREVIATIONS
Relevant definitions for this RFQ are provided in 01 NCAC 05A .0112 and in the Instructions to Vendors found in Sourcing Tool, which are incorporated herein by this reference.
The following definitions, acronyms, and abbreviations are also relevant to this RFQ:
• NPWCBSD: Non-Profit Work Centers for the Blind and Severely Disabled
• RFQ: Request for Qualifications
• STC - State Term Contract
• Consumables / Routine Consumables: regularly ordered supplies that are used, depleted, or replaced through normal operations.
• Non-Routine Consumables and Equipment: goods or equipment purchased less frequently, typically based on a specific or occasional need.
3.0 METHOD OF AWARD AND QUOTE EVALUATION PROCESS
3.1 METHOD OF AWARD
North Carolina G.S. 143-52 provides a general list of criteria the State shall use to award contracts, as supplemented by the additional criteria herein. The Goods or Services being procured shall dictate the application and order of criteria; however, all award decisions shall be in the State’s best interest.
The State is seeking responses from Non-Profit Work Centers for the Blind and Severely Disabled only, which the State will contract with directly. All responsive quotes will be reviewed, and award or awards will be based on the responsive quotes(s) offering goods and services substantially in accord with that paid by governmental agencies for similar goods or services of equivalent quality.
While the intent of this RFQ is to award a Contract(s) to multiple Vendors, the State reserves the right to make separate awards to different Vendors for one or more line items, to not award one or more line items or to cancel this RFQ in its entirety without awarding a Contract, if it is considered to be most advantageous to the State to do so.
The State reserves the right to waive any minor informality or technicality in quotes received.
Quote Number: DPC-355257846-SA-2026 Vendor: ____________________________________
Ver: 08/2026 10
3.2 CONFIDENTIALITY AND PROHIBITED COMMUNICATIONS DURING EVALUATION
While this RFQ is under evaluation, the responding Vendor, including any subcontractors and suppliers, is prohibited from engaging in conversations intended to influence the outcome of the evaluation. See the Paragraph of the “Instructions To Vendors” entitled COMMUNICATIONS BY VENDORS.
Each Vendor submitting a quote to this RFQ, including its employees, agents, subcontractors, suppliers, subsidiaries and affiliates, is prohibited from having any communications with any person inside or outside the using agency; issuing agency;
other government agency office or body (including the procurement lead named above, any department secretary, agency head, members of the General Assembly and Governor’s office); or private entity, if the communication refers to the content of Vendor’s proposal or qualifications, the content of another Vendor’s proposal, another Vendor’s qualifications or ability to perform a resulting contract, and/or the transmittal of any other communication of information that could be reasonably considered to have the effect of directly or indirectly influencing the evaluation of proposals, the award of a contract, or both.
Any Vendor not in compliance with this provision shall be disqualified from evaluation and award. A Vendor’s proposal may be disqualified if its subcontractor and/or supplier engage in any of the foregoing communications during the time that the procurement is active (i.e., the issuance date of the procurement until the date of contract award or cancellation of the procurement). Only those discussions, communications or transmittals of information authorized or initiated by the issuing agency for this RFQ or inquiries directed to the procurement lead named in this RFQ regarding requirements of the RFQ (prior to proposal submission) or the status of the award (after submission) are excepted from this provision.
3.3 EVALUATION PROCESS
Only responsive submissions will be evaluated.
The State will conduct an evaluation of responsive Quotes, as follows:
Quotes will be received according to the method stated in the Quote Submittal section above.
All quotes must be received by the issuing agency not later than the date and time specified in the RFQ SCHEDULE Section above, unless modified by Addendum. Vendors are cautioned that this is a request for offers, not an offer or request to contract, and the State reserves the unqualified right to reject any and all offers at any time if such rejection is deemed to be in the best interest of the State.
At the date and time provided in the RFQ SCHEDULE Section above, unless modified by Addendum, the quotes from each responding Vendor will be opened publicly and all offers (except those that have been previously withdrawn, or voided quotes) will be tabulated. The tabulation shall be made public at the time it is created. When negotiations after receipt of quotes is authorized pursuant to G.S. 143-49 and 01 NCAC 05B.0503, only the names of offerors and the Goods and Services offered shall be tabulated at the time of opening. Cost and price shall become available for public inspection at the time of the award. Interested parties are cautioned that these costs and their components are subject to further evaluation for completeness and correctness and therefore may not be an exact indicator of a Vendor’s pricing position.
At their option, the evaluators may request oral presentations or discussions with any or all Vendors for clarification or to amplify the materials presented in any part of the quote. Vendors are cautioned, however, that the evaluators are not required to request presentations or other clarification—and often do not. Therefore, all quotes should be complete and reflect the most favorable terms available from the Vendor. Prices of quote cannot be altered or modified as part of a clarification.
Quotes will generally be evaluated, based on completeness, content, cost, and responsibility of the Vendor to supply the requested Goods and Services. Specific evaluation criteria are listed in Section 3.1 METHOD OF AWARD.
Quote Number: DPC-355257846-SA-2026 Vendor: ____________________________________
Ver: 08/2026 11
Upon completion of the evaluation process, the State will make Award(s) based on the evaluation and post the award(s) to the electronic Vendor Portal (eVP), https://evp.nc.gov, under the RFQ number for this solicitation. Award of a contract to one Vendor does not mean that the other quotes lacked merit, but that, all factors considered, the selected quote was deemed most advantageous and represented the best value to the State.
The State reserves the right to negotiate with one or more Vendors, or to reject all original offers and negotiate with one or more sources of supply that may be capable of satisfying the requirement, and in either case to require Vendor to submit a Best and Final Offer (BAFO) based on discussions and negotiations with the State.
3.4 PERFORMANCE OUTSIDE THE UNITED STATES
Vendor shall complete ATTACHMENT: LOCATION OF WORKERS UTILIZED BY VENDOR. In addition to any other evaluation criteria identified in this RFQ, the State may also consider, for purposes of evaluating proposed or actual contract performance outside of the United States, how that performance may affect the following factors to ensure that any award will be in the best interest of the State:
a) Total cost to the State
b) Level of quality provided by the Vendor
c) Process and performance capability across multiple jurisdictions
d) Protection of the State’s information and intellectual property
e) Availability of pertinent skills
f) Ability to understand the State’s business requirements and internal operational culture
g) Particular risk factors such as the security of the State’s information technology
h) Relations with citizens and employees
i) Contract enforcement jurisdictional issues
3.5 INTERPRETATION OF TERMS AND PHRASES
This RFQ serves two functions: (1) to advise potential Vendors of the parameters of the solution being sought by the State; and
(2) to provide (together with other specified documents) the terms of the contract resulting from this procurement. The use of phrases such as “shall,” “must,” and “requirements” are intended to create enforceable contract conditions. In determining whether quotes should be evaluated or rejected, the State will take into consideration the degree to which Vendors have proposed or failed to propose solutions that will satisfy the State’s needs as described in the RFQ. Except as specifically stated in the RFQ, no one requirement shall automatically disqualify a Vendor from consideration. However, failure to comply with any single requirement may result in the State exercising its discretion to reject a quote in its entirety.
4.0 REQUIREMENTS
This Section lists the requirements related to this RFQ. By submitting a quote, the Vendor agrees to meet all stated requirements in this Section, as well as any other specifications, requirements, and terms and conditions stated in this RFQ. If a Vendor is unclear about a requirement or specification or believes a change in a requirement would allow for the State to receive a better quote, the Vendor is encouraged to submit these items in the form of a question during the question and answer period in accordance with the Quote Questions Section above.
4.1 PRICING
Quote price shall constitute the total cost to the State for delivery fully assembled and ready for use, including all applicable charges for shipping, delivery, handling, administrative and other similar fees. Vendor shall complete ATTACHMENT: PRICING CATALOG and upload in the Sourcing Tool. The pricing provided in ATTACHMENT: PRICING CATALOG, or resulting from any negotiations, is incorporated herein and shall become part of any resulting contract.
https://evp.nc.gov/
Quote Number: DPC-355257846-SA-2026 Vendor: ____________________________________
Ver: 08/2026 12
Pricing shall be provided based on two (2) options, to include Item List Price or Percentage off MSRP.
4.2 ADDITIONAL SAVINGS OFFERS/REBATES
This component of the Pricing Response is optional, but the State encourages Vendors to provide additional financial incentives/rebates, if possible, within the scope of this RFQ, that will benefit the State. These additional incentives could include, but are not limited to additional discounts based on total spend volumes, tier pricing, rebates, additional discounts by manufacturer, etc. Additional Discount Offers shall be in addition to the discounts Vendor offers as a List Item Price. Additional Discount Offers shall be provided in ATTACHMENT : PRICING CATALOG.
Additional Discounts: As part of the pricing submittal, Vendors are being requested to propose an additional percentage discount which would be applied to all orders for the remainder of the contract term if and when the total orders against the contract exceed the provided amount, at any point during the life of the contract. Orders from all entities utilizing this contract will count toward the contract volume discount threshold.
Rebates: If a rebate is offered, it will be based on reported sales, on a quarterly basis (see Section 6.5 PERIODIC QUARTERLY REPORTS). The Vendor shall submit the rebate amount due by check with the “Contracts Number," “Report Amount,” and “Report Period” on either the check stub or other remittance materials. The payment shall be made by check as described herein.
Checks shall be payable to: NCDOA, Division of Purchase & Contract
Checks shall be mailed to: NCDOA, Division of Purchase & Contract, Contract Manager 1301 Mail Service Center Raleigh, NC 27699
All discounts in Vendor’s quote shall remain in effect for the entire contract period and shall not be decreased. However, the discount may be increased, and any such increase shall remain in effect for the remainder of the contract period and any subsequent extensions. Volume or tier discounts, if offered, shall apply to purchase orders placed for delivery to the same location. Vendors may provide volume or tier discounts to orders that include multiple delivery points from the same agency.
The State reserves the right to accept or reject all or part of the proposed Additional Discount Offers as part of a Vendor’s Total Price Submittal Value. The State has sole discretion to not assign value to Vendor’s proposed Additional Discount Offers which the State cannot quantify or to give only partial value for Additional Discount Offers. Vendors may offer the State additional discounts using the Additional Discount Offers within ATTACHMENT: PRICING CATALOG.
4.3 TRANSPORTATION AND IDENTIFICATION
The Vendor shall deliver Free-On-Board (FOB) Destination to any requested location within the State of North Carolina with all transportation costs and fees included in the total quote price.
When an order is placed using a purchase order, the purchase order number shall be shown on all packages and shipping manifests to ensure proper identification and payment of invoices. If an order is placed without using a purchase order, such as via phone, the Buyer’s name shall be shown on all packages. A complete packing list shall accompany each shipment. Vendors shall not ship any products until they have received an order.
4.4 DELIVERY AND INSTALLATION
Vendor shall complete delivery as indicated on ATTACHMENT: PRICING CATALOG.
The Vendor shall deliver ordered items after receipt of purchase order within the time specified for the product on the relevant ATTACHMENT: PRICING CATALOG, unless prior written approval is obtained from the Buyer or the P&C Contract Administrator.
All deliveries of goods ordered under the term contract resulting from this solicitation shall consist of a Standard Delivery, as
Quote Number: DPC-355257846-SA-2026 Vendor: ____________________________________
Ver: 08/2026 13 described below, unless otherwise specified in the purchase order. The specified location may include a loading dock or an area inside a building.
Standard Delivery shall be made to the location specified by the Buyer in the Purchase Order and ready for use. Inside means any location within a State user's occupied building. Ready for use means product is unpacked, assembled, inspected and free of patent defects or damage. Vendor must anticipate and make necessary arrangements for access to the delivery location considering presence and availability of elevators, steps, parking and hours of operation.
Vendor shall furnish all necessary transportation, materials, and supplies as may be required to deliver, install and set-in place ready for owner’s use equipment or materials and related supplies. The successful Vendor(s) shall notify the Buyer when one or more items in an order cannot be delivered or installed within the time specified. After notification to the Buyer of a fulfillment delay of one or more items in a shipment, the Buyer may cancel undelivered items within an order, or an order in its entirety, without penalty or charge, providing the cancellation occurs before the delayed item or order has shipped.
Installation of equipment or products shall be billed under the following conditions: the amount of the installation charge is identified in Vendor’s catalog in conjunction with the equipment or products and related supplies, the Buyer is provided an option to affirmatively accept or decline installation services at the time of ordering, and any approved charge is listed as a separate line item on the purchase order and invoice. Vendor shall be responsible for the removal and disposal of all packaging materials, and any other debris resulting from the installation of the equipment or materials and related supplies from the Buyer’s location.
Acceptance and approval of charges for installation of such items shall be at the sole discretion of the Buyer. Any resulting damages to the item or to other State property during the installation by the Vendor shall be repaired at the Vendor's sole expense. General set-up activities needed to make an equipment or materials ready for use (such as moving furniture, relocation insertion of adjustable shelves into a bookcase or placing a desk chair onto its pedestal) shall not be considered installation and shall be included in the contract price.
In the event the delivery is not received within the contract delivery period, the Vendor may be held in default in accordance with, Section 1: DEFAULT AND PERFORMANCE BOND, in the North Carolina General Contract Terms and Conditions.
4.5 OTHER SERVICES
Any additional services, including design services, offered by Vendor shall be accepted or approved at the sole discretion of the State after negotiation and agreement on any applicable fee. All service fees shall be listed as a separate line item on the purchase order and invoice.
4.6 RETURN/RESTOCKING POLICY
Vendor shall accept merchandise returns from users for a period of thirty (30) business days after delivery. Vendor shall provide full credit or full refund to users, whichever a user requests, within thirty (30) business days on all returns of ordered products that are in original packaging and in re-sellable conditions. Vendor shall not impose a restocking fee on Buyer for merchandise that has been returned, unless it is a specialty item and the Buyer has been notified, at the time of placement of order, of the potential restocking fee.
Equipment or products which are unacceptable because of quality problems, duplicated shipments, outdated product, damaged, or other issues related to Vendor or product performance, shall be returned at Vendor’s expense within five (5) business days after receipt of notification from the Ordering Entity; with no restocking charge.
4.7 DEFECTIVE PRODUCTS
In the event a product is found to be defective, Vendor agrees to replace the item immediately, within the same delivery time frame at no additional charge to the State.
Quote Number: DPC-355257846-SA-2026 Vendor: ____________________________________
Ver: 08/2026 14
4.8 PRODUCT RECALL
Vendor expressly assumes full responsibility for prompt notification to the Contract Manager at the State’s Division of Purchase & Contract of any product recall in accordance with the applicable State or Federal regulations. The Vendor shall support the Contract Manager in necessary follow-up with State entities that have purchased recalled products to replace, at no cost to the State, any such products promptly.
4.9 OUT-OF-STOCK AND BACK-ORDERS
The Vendor shall notify the Buyer when one or more items in an order cannot be delivered within the time specified. After notification to Buyer by Vendor of a fulfillment delay of one or more items in the order, the Buyer may cancel undelivered items within an order, or an order in its entirety, without penalty or charge, to the extent that the notice of cancellation occurs before Buyer is notified that the delayed item or other cancelled items in the order have shipped.
4.10 QUALITY ACCEPTANCE INSPECTION
It is the responsibility of the receiving Buying Entity to inspect all materials, supplies and equipment upon delivery to ensure compliance with the Contract requirements and specifications.
INVOICES MAY NOT BE PAID BY THE USING AGENCY UNTIL AN INSPECTION HAS OCCURRED, AND THE GOODS ACCEPTED.
4.11 AUTHORIZED RESELLER
A Vendor may quote if it is a manufacturer of the product quote or if it is an Authorized Dealer of that product. If the Vendor is an Authorized Dealer, it shall submit a certification from the manufacturer confirming that Vendor is an Authorized Dealer.
The Vendor shall be authorized by the manufacturer to distribute or resell the products and/or maintenance offered in this RFQ. The Vendor shall provide a signed statement from the manufacturer confirming authorization upon request from the agency. Failure to provide this statement shall constitute sufficient grounds for rejection of Vendor’s offer, at the discretion of the State.
• Manufacturer: The entity that manufactures or produces a proposed good.
• Authorized Dealer: An entity designated by an awarded Vendor to accept orders, fulfill orders, issue invoices, or receive payment under the Contract.
• Authorized Reseller: A dealer, distributor, or other entity authorized by the manufacturer to sell the proposed good.
Vendor is the: Manufacturer Dealer Reseller Distributor
Authorized: Yes No Attached Manufacturer’s Authority: Yes No
4.12 AUTHORIZED DEALERS
An awarded Vendor may utilize approved, Authorized Dealers, to participate as alternate distribution sources for Vendor.
Authorized Dealers may be added at any time during the contract term at the discretion of the Vendor, provided that they agree to comply with all terms and conditions of the awarded contract, with no set minimum or maximum number of Authorized Dealers that may be approved. Such participation is subject to the following conditions:
Designation of Authorized Dealer(s) Vendor shall specify whether orders must be placed directly with Vendor or may be placed directly with Authorized Dealer(s).
If Authorized Dealer(s) are designated to fulfill orders under this Contract, issue invoices and receive payment, Vendor must provide P&C, a list of those designated authorized dealers submitted with its Quote. P&C will require a vendor registration process for all Vendors recommended for contract award and their authorized dealers through the E-Procurement System.
Authorized Dealers must register as an e-Procurement vendor with the State of North Carolina upon contract award and must comply with all terms and conditions of this RFQ. Awarded Vendors remain responsible for contract compliance by its
Quote Number: DPC-355257846-SA-2026 Vendor: ____________________________________
Ver: 08/2026 15
Authorized Dealers, and neither an order placed with, or items delivered by, a Vendor’s Authorized Dealer shall relieve the Vendor from any obligation under this contract.
Will Vendor maintain Authorized Dealers: Yes No
Attached List of Authorized Dealers: Yes No
Modifications in Authorized Dealer List If a Vendor allows Authorized Dealers to participate in the Contract, post-award requests to add or delete Authorized Dealers or to modify Authorized Dealer information must be submitted to P&C’s Contract Manager for prior approval.
4.13 WARRANTY
Manufacturer’s standard warranty shall apply. Vendors shall include a copy of the manufacturer’s standard warranty with the quote response.
4.14 DESCRIPTIVE LITERATURE
Vendor shall submit, with its quote and in the designated area of the Sourcing Tool, complete descriptive literature, specifications, certifications, and any other pertinent information necessary to evaluate the goods offered and determine compliance with the specifications. Failure to provide sufficient information may be grounds for rejection of the quote, at the State’s discretion.
4.15 REFERENCES
Vendors shall provide at least three (3) customer references using ATTACHMENT: CUSTOMER REFERENCE FORM. References shall be from separate customers for whom the Vendor has provided goods or services comparable in scope to those offered under this RFQ.
The State may contact the references to evaluate the Vendor’s experience, quality of goods or services, customer service, timeliness, and overall performance. Information obtained from the references may be considered in the evaluation of the Vendor’s response.
4.16 SUSTAINABILITY EFFORTS
According to G.S. 143-58.2, it is the policy of this State to encourage and promote the purchase of products with recycled content and to purchase items that are reusable, refillable, repairable, more durable, and less toxic to the extent that the purchase or use is practicable and cost effective. The quote must describe how environmental requirements which relate to clear labeling of the environmental/sustainability attributes (e.g. environmental certifications, total and post-consumer recycled content, etc.) of products in the proposed product catalogs, demonstrating the ability to run usage reports that include information about each product’s environmental/sustainability attributes, packaging and recycling of spent products. Each Vendor shall complete and submit Attachment: Sustainability Efforts. If a requested sustainability practice or attribute does not apply to the Vendor’s proposed goods or services, the Vendor shall indicate “Not Applicable” and provide a brief explanation in the designated area of the Sourcing Tool.
4.17 RETURN POLICY
Vendor shall accept merchandise returns from Buying Entity for a period of thirty (30) business days after delivery. Vendor shall provide full credit or full refund to Buying Entity, whichever is requested, within thirty (30) business days on all returns of an ordered item that returns of an ordered product that (1) is a stock item in original packaging and in re-sellable conditions; (2) is not a specialty or customized item; (3) is defective or damaged; (4) is a return of an incorrect product shipped; (5) results
Quote Number: DPC-355257846-SA-2026 Vendor: ____________________________________
Ver: 08/2026 16 from a Vendor order entry error; or (6) is non-conforming due to any other cause reasonably assumed to be the fault of the Vendor.
Vendor may charge a restocking fee for an undamaged, conforming goods outside the thirty (30) business day period and for returns of custom-made items. A custom-made item that must be specially manufactured for a specific order due to Buyer’s choices of non-standard dimensions, fabric, choice of wood or stain, and the like. An otherwise standard item is not considered custom-made simply because it is manufactured to fulfill a Buying Entity’s order.
4.18 PRODUCT SAFETY LISTING
All manufactured items and/or fabricated assemblies subject to operation under pressure or operation…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .