DOT Spec. No. 3-D61H-092526.pdf

PDF 44 KB Posted

Attached to
Electric Chain Hoist - 2 Ton, with Plain Trolley
Solicitation number
645-RFQ-3190-2027
Issued by
Black Hawk County, Iowa

About this file

This is a specification document from the Iowa Department of Transportation for an electric chain hoist procurement. The Iowa DOT is seeking competitive quotes for a 2-ton electric chain hoist with plain trolley, with quotes due November 3, 2026. The opportunity was posted on October 30, 2026. The hoist must meet specific technical requirements including rated loads of 2-tons with standard lifts available in 10, 15, or 20-foot configurations, 115/230-volt single-phase 60 hertz motors, and adjustable limit switches for upper and lower travel regulation. Additional required features include an oil bath transmission with precision machined alloy steel gears, a NEMA 3R push button station with 24-volt control, a compact aluminum housing, plain trolley for manual positioning, wrap-around side plates for safety, and machined cast iron trolley wheels with sealed lifetime lubricated ball bearings. The vendor is responsible for on-site installation at a location designated by the purchase order. The hoist includes a lifetime warranty.

No pricing terms, set-asides, incumbent information, funding sources, or additional salient details are provided in the specification document. The file focuses exclusively on the technical requirements and performance standards for the requested equipment.

View the file

Other files

File Type Posted
1465902-event.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Spec. No. 3-D61H-092526

IOWA DEPARTMENT OF TRANSPORTATION

SPECIFICATIONS

For

Electric Chain Host

General Requirements

Capacity & Lift – Rated loads for 2-tons, with 10, 15, or 20-foot standard lifts.

Voltage & Motors – 115/230 – Single Phase. 60 hertz.

Limit Switches – Adjustable to regulate upper and lower travel. Brass nuts standard for improved repeatability and chain positioning.

Oil Bath Transmission – Precision machined alloy steel gears run in oil bath for longer, quieter operation.

NEMA 3R Push Button Station – Ergonomic design fits operator’s hand for thumb or two-handed operation. 24 Volt Control for operator safety.

Frame – Compact aluminum housing for portability and ease of installation.

Plain Trolley – For manual positioning of hoist and load.

Wrap-Around Side Plates – Act as safety lugs and as bumpers to protect wheels.

Trolley Wheels – Machined, cast iron wheels with sealed, lifetime lubricated ball bearings.

Lifetime Warranty

Installation

Vendor to install Electric Chain Hoist on site in location designated by the purchase order.

File details come from the government source that posted it. Updated .