DOT-ITB-23-6185BJ Invitation to Bid.pdf

State of Florida Department of Transportation

INVITATION TO BID

Daktronics Dynamic Message Sign (DMS) Parts

DOT-ITB-23-6185BJ

CONTACT FOR QUESTIONS:

D6.Purch@dot.state.fl.us 1000 NW 111th Avenue Miami, Florida 33172

DOT-ITB-23-6185BJ

Department of Transportation

Procurement Office 1000 NW 111th Avenue, Rm. 6202B

Miami, FL 33172

INVITATION TO BID REGISTRATION

PLEASE COMPLETE AND RETURN THIS FORM ASAP

E-MAIL TO D6.Purch@dot.state.fl.us

Bid Number: DOT-ITB-23-6185BJ

Title: Daktronics Dynamic Message Sign (DMS) Parts

Bid Due Date & Time (On or Before): June 30, 2023, at 10:00 AM

Potential bidders should notify our office by returning this Bid Registration Form as soon as possible after downloading. Complete the information below e-mail to D6.Purch@dot.state.fl.us

THE INVITATION TO BID DOCUMENT YOU RECEIVED IS SUBJECT TO CHANGE. Notice of changes (Addenda), will be posted on the Florida Vendor Information Portal at https://vendor.myfloridamarketplace.com/, under this bid number, click on “Search

Advertisements”, click on the drop-down arrow beside the box under Advertisement Type, select Invitation to Bid, click on the drop-down arrow beside the box for Organization, select

FLORIDA DEPARTMENT OF TRANSPORTATION, then go to the bottom of the same page and click on Advertisement Search. It is the responsibility of all potential bidders to monitor this site for any changing information prior to submitting your bid.

Company Name:

Address:

City, State, Zip:

Telephone: ( ) Contact Person:

Federal ID Number:

Internet E-Mail Address: __________________________________________________

For further information on this process, e-mail or telephone: D6.Purch@dot.state.fl.us

I N T R O D U C T I O N S E C T I O N

1) INVITATION

The purpose of this Invitation to Bid is to obtain competitive bids to establish a 12 Months contract for the purchase of Daktronics Dynamic Message Sign (DMS) Parts by the Department of Transportation, hereafter referred to as the "Department". The contract will become effective on the date the successful bidder(s) is approved for award and will expire 12 Months from that date. After the award, said bidder(s) will be referred to as the "Vendor(s)".

All commodities identified in this Invitation to Bid will be subject to the availability of identical commodities as provided by mandatory Department of Management Services' State Contract(s) at such time these commodities become available. In the event of duplication(s) of commodities, the Department of Management Services' mandatory State Contract shall prevail.

2) TIMELINE

Provided below is a list of critical dates and actions. These dates are subject to change. Notices of changes (Addenda) will be posted on the Florida Vendor Information Portal at https://vendor.myfloridamarketplace.com/, (click on “Search Advertisements”) under this bid number. It is the responsibility of all potential bidders to monitor this site for any changing information prior to submitting your bid.

ACTION / LOCATION DATE LOCAL TIME

DEADLINE FOR TECHNICAL QUESTIONS - 06-19-2023 5:00 PM

Via Email: D6.Purch@dot.state.fl.us (There is no deadline for administrative questions)

BIDS DUE (ON OR BEFORE) - 06-30-2023 10:00 AM

Via Email: D6.Purch@dot.state.fl.us

INSTRUCTIONS FOR ELECTRONIC SUBMISSION OF BID/PROPOSALS

This section contains instructions that describe the required format for the bid/proposal submittal.

Please follow the below instructions. Failure to follow these instructions may result in your proposal being found non-responsive. Nonresponsive replies will not be evaluated.

Bid/Proposals shall be submitted to: D6.Purch@dot.state.fl.us Subject Line must show: DOT-ITB-23-6185BJ – (Insert Vendor’s Name) All proposals submitted electronically shall contain one PDF file and have a size limit of 25MB, attachment and be marked as follows:

DOT-ITB-23-6185BJ BID PROPOSAL PACKAGE – (Insert Vendor’s Name)

NOTES:

Documents shall be submitted in portable document format (PDF) and have a size limit of 25MB.

The body of the email shall not contain any information.

ACTION / LOCATION DATE LOCAL TIME

PUBLIC OPENING – 06-30-2023 2:00 PM

Florida Department of Transportation 1000 NW 111th Avenue Miami, FL 33172

FINAL SELECTION MEETING – 07-10-2023 10:00 AM

Florida Department of Transportation 1000 NW 111th Avenue Miami, FL 33172

POSTING OF INTENDED DECISION/AWARD IN VIP 07-10-2023 12:00 PM

3) BID OPENING AGENDA

The sealed bids will be opened by the Department's Procurement Office personnel at the date, time and location in the Timeline. All bid openings are open to the public and will be conducted according to the following agenda:

Opening remarks – Approximate time of 2 minutes by Department Procurement Office personnel.

Public input period – To allow a maximum of 15 minutes total for public input related to the bid solicitation.

Bids opened – At conclusion of public input or 15 minutes, whichever occurs first, bids received timely will be opened with bidder’s name and prices to be read aloud.

Adjourn - After all bids received timely have been opened, the meeting will be adjourned.

4) SPECIAL ACCOMMODATIONS

Any person with a qualified disability requiring special accommodations at a pre-bid conference, public meeting, and/or opening shall contact the contact person at the phone number, e-mail address provided on the title page at least five (5) working days prior to the event. If you are hearing or speech impaired, please contact this office by using the Florida Relay Services which can be reached at 1 (800) 955-8771 (TDD).

5) CONTRACT USE

Use of the contract resulting from this bid will be optional for the Department. The Department reserves the right to solicit separate bids for any unusual or abnormal quantity requirements that may arise during the term of the contract.

6) ESTIMATED PURCHASES

The Department anticipates purchasing the estimated quantities, shown on the bid sheet(s), for a one (1) year period of any contract resulting from this bid. The estimated quantities are given only as a guideline for preparing your bid and should not be construed as representing the actual quantities to be purchased under this contract. The Vendor(s) shall supply, at bid prices, the actual quantities ordered regardless of whether the total of such quantities is more or less than anticipated. This bid and the resulting contract will be subject to annual appropriated funding.

7) RENEWAL

Upon mutual agreement, the Department and the Contract Vendor may renew the contract for a period that may not exceed 1 year or the term of the original contract, whichever is longer. The renewal must be in writing and signed by both parties and is subject to the same terms and conditions set forth in the initial contract and any written amendments signed by the parties. Any renewal shall specify the renewal price, as set forth in the solicitation response except that an agency may negotiate lower pricing. Renewal is contingent upon satisfactory performance evaluations and subject to the availability of funds.

S P E C I A L C O N D I T I O N S

1) MyFloridaMarketPlace

BIDDERS MUST BE ACTIVELY REGISTERED IN THE STATE OF FLORIDA’S

MYFLORIDAMARKETPLACE SYSTEM BY THE TIME AND DATE OF THE BID OPENING OR THEY MAY

BE CONSIDERED NON-RESPONSIVE (see Special Condition 21). All prospective bidders that are not registered should go to https://vendor.myfloridamarketplace.com/ to complete on-line registration, or call 1- 866-352-3776 for assisted registration.

All payment(s) to the vendor resulting from this competitive solicitation WILL be subject to the MFMP Transaction Fee in accordance with the referenced Form PUR 1000 General Contract Condition #14. The Transaction Fees imposed shall be based upon the date of issuance of the payment.

2) FLORIDA DEPARTMENT OF FINANCIAL SERVICES (DFS) W-9 REQUIREMENT

The Florida Department of Financial Services (DFS) requires all vendors that do business with the state to submit an electronic Substitute Form W-9. Vendors must submit their W-9 forms electronically at https://flvendor.myfloridacfo.com to receive payments from the state. Contact the DFS Customer Service Desk at (850) 413-5519 or FLW9@myfloridacfo.com with any questions.

3) QUESTIONS & ANSWERS

In accordance with section 287.057(23), Florida Statutes, respondents to this solicitation or persons acting on their behalf may not contact, between the release of the solicitation and the end of the 72-hour period following the agency posting the notice of intended award, excluding Saturdays, Sundays, and state holidays, any employee or officer of the executive or legislative branch concerning any aspect of this solicitation, except in writing to the procurement officer or as provided in the solicitation documents. Violation of this provision may be grounds for rejecting a response.

Any technical questions arising from this Invitation to Bid must be forwarded, in writing, to the procurement agent identified below. Questions must be received no later than the time and date reflected on the Timeline.

The Department’s written response to written inquiries submitted timely by bidders will be posted on the

Florida Vendor Information Portal at https://vendor.myfloridamarketplace.com/, click on “Search Advertisements”), under this bid number. It is the responsibility of all potential bidders to monitor this site for any changing information prior to submitting their bid.

WRITTEN TECHNICAL QUESTIONS should be submitted to: D6.Purch@dot.state.fl.us

Questions regarding administrative aspects of the bid process should be directed to the Procurement Agent to: D6.Purch@dot.state.fl.us

4) ORAL INSTRUCTIONS / CHANGES TO THE INVITATION TO BID (ADDENDA)

No negotiations, decisions, or actions will be initiated or executed by a bidder as a result of any oral discussions with a State employee. Only those communications which are in writing from the Department will be considered as a duly authorized expression on behalf of the Department.

Notices of changes (Addenda) will be posted on the Florida Vendor Information Portal at https://vendor.myfloridamarketplace.com/, (click on “Search Advertisements”) under this bid number. It is the responsibility of all potential bidders to monitor this site for any changing information prior to submitting your bid. All Addenda will be acknowledged by signature and subsequent submission of Addenda with bid when so stated in the Addenda.

5) DIVERSITY ACHIEVEMENT

The Department, in accordance with Title VI of the Civil Rights Act of 1964, 42 USC 2000d- 2000d-4, Title 49, Code of Federal Regulations, U.S. Department of Transportation, Subtitle A, Office of the Secretary, Part 21, Nondiscrimination in federally-assisted programs of the Department of Transportation issued pursuant to such Act, hereby notifies all bidders that the Department will affirmatively ensure that in any contract/agreement entered into pursuant to this advertisement, minority and disadvantaged business enterprises will be afforded the full opportunity to submit bids in response to this invitation and will not be discriminated on the basis of race, color, national origin, or sex in consideration for an award.

The Department encourages the recruitment and utilization of small, minority, women, and service-disabled veteran businesses. The Department, its vendors, suppliers, and consultants should take all necessary and reasonable steps to ensure that small, minority, women, and service-disabled veteran businesses have the opportunity to compete for and perform contract work for the Department in a nondiscriminatory environment.

6) PRICES/DELIVERY

Prices shall be firm, net, delivered prices, F.O.B. destination.

Delivery must be made within thirty (30) calendar days or less upon receipt of a purchase order by the contract vendor at their designated ordering location. If more time is needed, the bidder should state the extra time required and the reasons why, in their bid response. Acceptance will be subject to the Department’s approval. Delivery must be made on or before the estimated delivery time provided in the bid sheet.

7) IN-STATE PREFERENCE FOR COMMODITY BIDS

In accordance with Section 287.084, Florida Statutes, when the lowest responsible and responsive bid is submitted by a vendor whose principal place of business is located outside the state of Florida, a 5% price preference shall be awarded to the lowest responsible and responsive vendor whose principal place of business is located in the state of Florida, as determined by the vendor’s registration with the Florida Department of State (Sunbiz), unless the state where the out-of-state vendor is located provides a price preference for businesses having a principal place of business in that state. In that case, the same price preference shall be awarded to the lowest responsible and responsive vendor whose principal place of business is located in the state of Florida responding to this Invitation to Bid (ITB).

All bidders MUST complete the attached “In-State Preference Form” and submit with their bid response. All vendors whose principal place of business is outside of Florida, as determined by the vendor’s registration with the Florida Department of State (Sunbiz), must accompany any written bid, proposal, or reply documents with a written opinion of an attorney at law licensed to practice law in that foreign state, as to the preferences, if any or none, granted by the law of that state to its own business entities whose principal places of business are in that foreign state in the letting of any or all public contracts. Failure to submit the “In-State Preference Form AND written opinion will result in the vendor being found non-responsive.

For the 5% preference, the Department will apply 5% to the bid price(s) of the lowest out of state vendor whose state does not grant a preference if that vendor has submitted the lowest responsible and responsive bid. The “In-State Preference” does not apply to transportation projects that use federal funds.

8) INTENDED AWARD

As the best interest of the State may require, the right is reserved to make award(s) by individual item, group of items, all or none, or a combination thereof: on a geographical district basis and / or on a statewide basis with one or more suppliers to reject any and all bids or waive any minor irregularity or technicality in bids received. When it is determined there is competition to the lowest responsible bidder, evaluation of other bids is not required. Bidders are cautioned to make no assumptions, unless their bid has been evaluated as being responsive. All awards made as a result of this bid shall conform to applicable Florida Statute. If the Department is confronted with identical pricing or scoring from multiple vendors, the Department shall determine the order of award using the following criteria, in the order of preference listed below (from highest priority to lowest priority):

1. Section 295.187(4), Florida Statutes; Veteran Business Enterprise

2. Section 287.087, Florida Statute; Drug Free Work Place

3. Section 287.057(11); Minority Business Enterprise

In the event that the application of the above referenced preferences does not resolve the identical replies, the Department shall determine the award by means of random drawing.

9) PRE-BID CONFERENCE: A PRE-BID CONFERENCE WILL NOT BE HELD.

10) ALTERNATES

ALTERNATE BRANDS WILL NOT BE CONSIDERED FOR THIS BID. BID AS SPECIFIED.

11) WARRANTY/SUBSTITUTIONS

A warranty is required on all items purchased against defective materials, workmanship, and failure to perform in accordance with required industry performance criteria, for a period of not less than ninety (90) days from the date of acceptance by the purchaser. Any deviation from this criteria must be documented in the bid response or the above statement shall prevail. Delivery of substitute commodities requires prior written approval from the ordering location.

12) REPLACEMENT/RESTOCKING

Replacement of all materials found defective within the warranty period shall be made without cost to the purchaser, including transportation if applicable. All fees associated with restocking cancelled orders shall be the responsibility of the vendor.

13) PRODUCT REQUIREMENTS/SPECIFICATIONS

Items furnished shall be standard products of the manufacturer or their suppliers, shall be new, unused, clean, and free from any defects or features affecting appearance, serviceability, or the safety of the user in normal intended use.

Any deviation from specifications indicated herein must be clearly pointed out; otherwise, it will be considered that items offered are in strict compliance with these specifications, and successful bidder will be held responsible, therefore. Deviations must be explained in detail on separate attached sheet(s).

14) ACCEPTANCE

All items listed in the specifications delivered to the Department not meeting specifications or found to be poorly manufactured will not be accepted, but returned to the vendor, at their expense, for replacement. Replacement of all items found defective shall be made without cost to the Department, including transportation, if applicable. As it may be impossible for each facility to inspect all items upon arrival, a reasonable opportunity must be given to these facilities for inspection of the items, and returning those that are defective.

15) REVIEW OF BIDDER'S FACILITIES & QUALIFICATIONS

After the bid due date and prior to contract execution, the Department reserves the right to perform or to have performed, an on-site review of the bidder's facilities and qualifications. This review will serve to verify data and representations submitted by the bidder and may be used to determine whether the bidder has adequate facilities, equipment, qualified and experienced staff, and overall management capabilities to provide the required items. The review may also serve to verify whether the bidder has financial capabilities adequate to meet the contract requirements.

Should the Department determine that the bid package has material misrepresentations or that the size or nature of the bidder's facilities, equipment, management capabilities, or the number of experienced personnel (including technical staff) are not adequate to ensure satisfactory contract performance, the Department has the right to reject the bid.

16) PROTEST OF INVITATION TO BID SPECIFICATIONS

Any person who is adversely affected by the contents of this Invitation to Bid must file the following with the Department of Transportation, Clerk of Agency Proceedings, Office of the General Counsel, 605 Suwannee Street, Mail Station 58, Tallahassee, Florida 32399-0450:

1. A written notice of protest within seventy-two (72) hours after the posting of the solicitation, (the notice of protest may be Faxed to 850-414-5264), and

2. A formal written protest in compliance with Section 120.57(3), Florida Statutes, within ten (10) days of the date on which the written notice of protest is filed.

Failure to file a protest within the time prescribed in section 120.57(3), Florida Statutes, or failure to post the bond or other security required by law within the time allowed for filing a bond shall constitute a waiver of proceedings under Chapter 120, Florida Statutes.

17) UNAUTHORIZED ALIENS

The employment of unauthorized aliens by any contractor is considered a violation of Section 274A(e) of the Immigration and Nationality Act. If the contractor knowingly employs unauthorized aliens, such violation shall be cause for unilateral cancellation of the contract.

18) SCRUTINIZED COMPANIES LISTS

ALL Responses, regardless of dollar value, must include a completed Vendor Certification Regarding Scrutinized Companies Lists to certify the respondent is not on either of those lists. The Form should be submitted with the Price Proposal.

A Vendor is ineligible to enter into a contract with the Department for goods or services of any amount if, at the time of entering into such contract, the Vendor is on the Scrutinized Companies that Boycott Israel List, created pursuant to Section 215.4725, Florida Statutes, or is engaged in a boycott of Israel.

Section 287.135, Florida Statutes, also prohibits companies from entering into a contract for goods or services of $1 million or more that are on either the Scrutinized Companies with Activities in Sudan List or the Scrutinized Companies with Activities in the Iran Petroleum Energy Sector Lists which were created pursuant to s. 215.473, Florida Statutes.

If the Department determines the Vendor submitted a false certification under Section 287.135 of the Florida Statutes, the Department shall either terminate the Contract after it has given the Vendor notice and an opportunity to demonstrate the Department’s determination of false certification was in error pursuant to Section 287.135 of the Florida Statutes, or maintain the Contract if the conditions of Section 287.135 of the Florida Statutes are met.

19) RESERVATIONS

The Department reserves the right to accept or reject any or all bids received and reserves the right to make an award without further discussion of the bids submitted. Therefore, the bidder should make sure that the bid package submitted is complete and accurate and submitted to ensure delivery on or before the bid opening time and date specified in this solicitation. It is understood that the bid will become a part of the Department's official file, without obligation to the Department.

20) ADDITIONAL TERMS & CONDITIONS

No conditions may be applied to any aspect of the ITB by the bidder. Any conditions placed on any aspect of the bid documents by the bidder may result in the bid being rejected as a conditional bid (see “RESPONSIVENESS OF BIDS”). DO NOT WRITE IN CHANGES ON ANY ITB SHEET. The only recognized changes to the ITB prior to bid opening will be a written Addenda issued by the Department.

21) RESPONSIVENESS OF BIDS

Bids will not be considered if not received by the Department on or before the date and time specified as the due date for submission. All bids must be typed or printed in ink. A responsive bid is an offer to provide the items specified in this Invitation to Bid in accordance with all requirements of this Invitation to Bid. Bids found to be non-responsive will not be considered. Bids may be rejected if found to be irregular or not in conformance with the specifications and instructions herein contained. A bid may be found to be irregular or non-responsive by reasons that include, but are not limited to, failure to utilize or complete prescribed forms, modifying the bid specifications, submitting conditional bids or incomplete bids, submitting indefinite or ambiguous bids, or executing forms or the bid sheet with improper and/or undated signatures. Other conditions which may cause rejection of bids include, evidence of collusion among bidders, obvious lack of experience or expertise to provide the required items, and failure to perform or meet financial obligations on previous contracts. ALL determinations of responsiveness will be the responsibility of the FDOT Procurement Office.

22) REQUIRED DOCUMENTS

The bidder must use the attached Bid Sheet to submit its bid. The Bid Sheet must be signed and dated in ink by a representative who is authorized to contractually bind the bidder. All bid sheets and other documentation submitted in response to this solicitation must be executed and submitted as instructed in Section 26) ELECTRONIC SUBMISSION OF BIDS.

23) "DRUG-FREE WORK PLACE" PREFERENCE

Whenever two or more bids which are equal with respect to price, quality, and service are received, the Department shall determine the order of award first in accordance with section 295.187(4), Florida Statutes, giving preference to “Veteran Business Enterprise” then to bid responses from vendors that certify the business has implemented a drug-free workplace program in accordance with Section 287.087, Florida Statutes. The “Drug-Free Workplace Program Certification” must be completed and submitted with the bid response to be eligible for this preference.

24) COPYRIGHTED MATERIAL

Copyrighted material will be accepted as part of a bid only if accompanied by a waiver that will allow the Department to make paper and electronic copies necessary for the use of Department staff and agents. It is noted that copyrighted material is not exempt from the Public Records Law, Chapter 119, Florida Statutes.

Therefore, such material will be subject to viewing by the public, but copies of the material will not be provided to the public.

25) ATTACHMENT TO ITB SUBMITTAL - CONFIDENTIAL MATERIAL

The Bidder must include any materials it asserts to be exempted from public disclosure under Chapter 119, Florida Statutes, in a separate bound document labeled "Attachment to Invitation to Bid, Number DOT-ITB- 23-6185BJ - Confidential Material". The Bidder must identify the specific Statute that authorizes exemption from the Public Records Law. Any claim of confidentiality on materials the Bidder asserts to be exempt from public disclosure and placed elsewhere in the bid will be considered waived by the Bidder upon submission, effective after opening.

26) ELECTRONIC SUBMISSION OF BIDS:

Electronic Bid Submittals:

Please follow the below instructions for the submittal of electronic bids, failure to do so, may result in your bid being found non-responsive. Non-responsive replies will not be evaluated.

INSTRUCTIONS FOR ELECTRONIC SUBMISSION OF BID/PROPOSALS

This section contains instructions that describe the required format for the bid/proposal submittal.

Please follow the below instructions. Failure to follow these instructions may result in your proposal being found non-responsive. Nonresponsive replies will not be evaluated.

Bid/Proposals shall be submitted to: D6.Purch@dot.state.fl.us Subject Line must show: DOT-ITB-23-6185BJ – (Insert Vendor’s Name) All proposals submitted electronically shall contain one PDF file and have a size limit of 25MB, attachment and be marked as follows:

DOT-ITB-23-6185BJ BID PROPOSAL PACKAGE – (Insert Vendor’s Name). The body of the email shall not contain any information.

It is the bidder’s responsibility to assure that the bid is delivered to the proper place on or before the Bid Due date and time (See Introduction Section 2 Timeline). Bids which for any reason are not so delivered, will not be considered.

27) MODIFICATIONS, RESUBMITTAL AND WITHDRAWAL

Bidders may modify submitted bids at any time prior to the bid due date. Requests for modification of a submitted bid shall be in writing and must be signed by an authorized signatory of the bidder. Upon receipt and acceptance of such a request, the entire bid will be returned to the bidder and not considered unless resubmitted by the due date and time. Bidders may also send a change in a sealed envelope to be opened at the same time as the bid. The ITB number, opening date and time should appear on the envelope of the modified bid.

28) POSTING OF INTENDED DECISION/AWARD

28.1 - General:

The Department’s decision will be posted on the Florida Vendor Information Portal at https://vendor.myfloridamarketplace.com/,, on the date and time in the Timeline, and will remain posted for a period of seventy-two (72) hours. Any bidder who is adversely affected by the Department's recommended award or intended decision must file the following with the Department of Transportation, Clerk of Agency Proceedings, Office of the General Counsel, 605 Suwannee Street, Mail Station 58, Tallahassee, Florida 32399-0450:

1. A written notice of protest within seventy-two (72) hours after posting of the Intended Award, (the notice of protest may be Faxed to 850-414-5264), and

2. A formal written protest and protest bond in compliance with Section 120.57(3), Florida Statutes, within ten (10) days of the date on which the written notice of protest is filed. At the time of filing the formal written protest, a bond (a cashier’s check or money order may be accepted) payable to the Department must also be submitted in an amount equal to one percent (1%) of the estimated contract amount based on the contract price submitted by the protestor.

Failure to file a protest within the time prescribed in Section 120.57(3), Florida Statutes, or failure to post the bond or other security required by law within the time allowed for filing a bond shall constitute a waiver of proceedings under Chapter 120, Florida Statutes.

28.2 - Inability to Post:

If the Department is unable to post as defined above, the Department will notify all bidders by electronic notification on the Florida Vendor Bid System (see special condition 28.1, above) and/or telephone. The Department will provide notification of any future posting in a timely manner.

28.3 - Request to Withdraw Bid:

Requests for withdrawal will be considered if received by the Department, in writing, within seventy-two (72) hours after the bid opening time and date. Requests received in accordance with this provision will be granted by the Department upon proof of the impossibility to perform based upon obvious error on the part of the bidder. Bidders that do not withdraw as stated above will forfeit their bid bond, if applicable.

29) RECYCLED MATERIAL

The Department encourages the use of products and materials with recycled content and post-consumer recovered materials. If the item(s) specified in the Technical Specification is available with recycled content, we request that you provide product information to help in our search for recycled products. However, this bid request is for the product as specified herein and does not require prices for recycled product. This information should be sent as part of your bid response or may be sent separately.

30) PRICE ADJUSTMENTS

The Department may, in its sole discretion, make an equitable adjustment in the Contract terms and/or pricing if pricing or availability of supply is affected by extreme and unforeseen volatility in the marketplace, that is, by circumstances that satisfy all the following criteria: (1) the volatility is due to causes wholly beyond the Vendor’s control, (2) the volatility affects the marketplace or industry, not just the particular Contract source of supply, (3) the effect on pricing or availability of supply is substantial, and (4) the volatility so affects the Vendor that continued performance of the Contract would result in a substantial loss. The Vendor shall provide thirty (30) days written notice to the Department and written approval from the Department is required. Documentation of cost adjustments shall be provided by the Vendor to the Department.

31) DELIVERY LOCATION(S)

The primary point of delivery for this contract will be the SunGuide Transportation Management Center (TMC), located at 1001 NW 111 Avenue, Miami, Florida 3317, but bid prices will include delivery to other locations throughout the State of Florida) .

32) CANCELLATION

All contract obligations shall prevail for at least one hundred and eighty (180) days after the effective date of the contract. For the protection of both parties, this contract may be cancelled in whole or in part after one hundred and eighty (180) days by either party giving thirty (30) days prior written notice to the other contract party. The contract may, also, be cancelled by the Department for nonperformance (default) in accordance with Rule 60A-1.006(3), F.A.C.

33) ORDERING INSTRUCTIONS

Manufacturers are encouraged to bid direct naming dealers who will accept orders and complete deliveries.

Bidders must include complete ordering instructions, including FEDERAL EMPLOYER IDENTIFICATION NUMBER (FEID), for invoicing dealers, with the bid on a separate sheet.

34) ORDER QUANTITIES

No minimum order quantities will be accepted. The Department will order as needed in the quantities needed.

35) OPEN PURCHASE ORDERS

The Department may, at its discretion, establish an open (estimated quantity) purchase order with the contract vendor(s) to facilitate the purchasing of materials. The purchase of materials may be placed by; (1) written purchase order, (2) telephone orders by authorized Department personnel, or (3) an itemized order in writing. The Department will supply the contract vendor(s) with a list of personnel authorized to order.

Delivery of items on these open purchase orders shall not exceed the contract effective period.

36) INVOICING

Invoices must match units specified on the Purchase Order.

37) FORMS

The Bidder must complete all required items below and submit them as part of the Bid package. Any Bid in which these forms are not used or in which these forms are improperly executed may be considered non-responsive and the bid may be subject to rejection.

Bid Sheet Drug-Free Workplace Program Certification (if applicable) In-State Preference MBE Utilization Vendor Certification Regarding Scrutinized Companies Lists (Form 375-030-60) E-Verify Ordering Instructions

38) TERMS AND CONDITIONS

38.1 General Contract Conditions (PUR 1000)

The State of Florida’s General Contract Conditions are outlined in form PUR 1000, which is a downloadable document incorporated into this Invitation to Bid (ITB) by reference. Any terms and conditions set forth in this ITB document will take precedence over the PUR 1000 form where applicable.

http://www.dms.myflorida.com/content/download/2933/11777/1000.pdf

The following paragraphs do not apply to this Invitation to Bid:

Paragraph 31, Dispute Resolution - PUR 1000 Paragraph 40, PRIDE – PUR 1000, when federal funds are utilized.

38.2 General Instructions to Respondents (PUR 1001)

The State of Florida’s General Instructions to Respondents are outlined in form PUR 1001, which is a downloadable document incorporated into this Invitation to Bid (ITB) by reference. Any terms and conditions set forth in this ITB document take precedence over the PUR 1001 form where applicable.

http://www.dms.myflorida.com/content/download/2934/11780/1001.pdf

The following paragraphs do not apply to this Invitation to Bid:

Paragraph 3, Electronic Submission – PUR 1001 Paragraph 4, Terms and Conditions – PUR 1001 Paragraph 5, Questions – PUR 1001

38.3 MFMP Purchase Order Terms and Conditions

All MFMP Purchase Order contracts resulting from this solicitation will include the terms and conditions of this solicitation and the State of Florida’s standardized Purchase Order Terms and Conditions, which can be found at the Department of Management Services website at the following link:

http://www.dms.myflorida.com/content/download/117735/646919/Purchase_Order_Terms_Sept_1,_2015_.pdf

Section 8(B), PRIDE, is not applicable when using federal funds.

39) ORDER OF PRECEDENCE

All responses are subject to the terms and conditions of this solicitation, which, in case of conflict, shall have the following order of precedence listed:

Special Conditions Technical Specifications Bid Sheet MFMP Purchase Order Terms and Conditions – Section 8(B), PRIDE, is not applicable when using federal funds.

General Instructions to Respondents (PUR 1001) General Contract Conditions (PUR 1000) Introduction Section

BID SHEET

ORDERING INSTRUCTIONS

Daktronics Dynamic Message Sign (DMS) Parts

BID SHEET

BID #: DOT-ITB-23-6185BJ FOB: SunGuide Transportation Management Center 1001 NW 111

Avenue, Miami, Florida 33172

BID TITLE: DAKTRONICS DYNAMIC MESSAGE SIGN (DMS) PARTS

BID AS SPECIFIED

NOTE: The Vendor’s unit price amount shall include all the necessary labor, materials, overhead, profits, shipping expenses, administrative expenses, insurance, warranty and all other incidentals to accomplish the work described in the Technical Specifications for this Invitation to Bid for procurement of parts for Dynamic Message Sign (DMS) manufactured by Daktronics. The Vendor’s Unit Price amounts are firm, net, delivered prices, Freight on Board (FOB) destination.

LINE

NUMBER

PART DESCRIPTION PART NUMBER

UNIT

PRICE

ESTIMATED

DELIVERY TIME

(DAYS)

1 ASSY, 12 POS RACKMT PANEL BRD, PAR. SURGE 0A-1249-3010

2 ASSY, 2 FAN & SNAP-DISK THERMOSTAT, 336S 0A-1249-2031

3 ASSY, HARN, 1-21 MODULE SIGNAL 0A-1309-3620

4 ASSY, HARN, 22 MODULE SIGNAL, 12" MODULES, 5 DOOR 0A-1325-3628

5 ASSY, HARN, 22-29 MODULE STRING 0A-1309-3621

6 ASSY, HARN, 9 MODULE CABLE, DC POWER, 4 PIN 0A-1309-3560

7 ASSY, IMPELLER AND EN-1632 FILTER DOOR 0A-1309-0205

8 ASSY, LIGHT SENSOR M2+, 3.5 FT 0A-1327-3000

9 ASSY, MINI CAN I/O, TC, TWO DOOR 0A-1249-4003

10 ASSY, T-STAT W/HARN, STD PINOUT, 85CLOSE-65OPEN CE 0A-1327-3104

11 ASSY, VANGUARD FIELD CONTROLLER 0A-1248-0070

12 ASSY; POWER SUPPLY, ISO BOARD, MTG 0A-1589-0501

13 ASSY; POWER SUPPLY, ISO BOARD, MTG, VF-2*** 0A-1993-0105

14 ASSY; POWER SUPPLY, MTG BRKT, & ISO BOARD 0A-1447-4601

15 AXIAL FAN; 172X150X51, >245CFM, 115VAC, 0.4A B-1075

16 AXIAL FAN; NCNR,172X150X51, > 269CFM, 24VDC, 1.20A B-1096

17 AXIAL FAN;120X120X38,>134CFM,115VAC, 22 WATT, B-1053

18 CAN DC I/O; 16IN/12OUT, OC, REG, COATED 0P-1247-4009

19 CAN DC I/O; 24 INPUT,5V,COATED 0P-1247-0009

20 CAN DIST BD;CAN 1-10, 5V, COATED, CR1105 0P-1248-0005

21 CAN DIST BD;CAN 1-10, REG, COATED, CR1105 0P-1248-0011

22 CAN DIST BD;CAN 1-5, REG, COATED, CR1105 0P-1248-0012

23 CAN TEMP & LIGHT DETECTOR II, REG, COATED 0P-1247-0019

24 CAN TEMP/HUM. & LIGHT DET. II, +5V, COATED 0P-1247-0021

25 CAN TEMP/HUM. & LIGHT DETECTOR II, REG, COATED 0P-1247-0015

26 CAN TEMP/LIGHT SENSOR, 4-48VDC IN, COATED 0P-1247-0038

27 CAN TEMP/LIGHT SENSOR, 4-48VDC IN, COATED ITS 0P-1247-0039

28 CAN TEMP/LIGHT SENSOR, 4-48VDC IN, CONDUIT, COATED 0P-1247-0041

29 CAN TEMP/LIGHT, COATED, W/O BUS TERM 0P-1247-0003

30 Controller 0A-1249-5014

31 Controller 0A-1248-2012

32 CS MOD IV; VAN-SB-N+1-9X15-33-1R2G1B-30X30-C-B1 0P-1332-1945

LINE

NUMBER

PART DESCRIPTION PART NUMBER

UNIT

PRICE

ESTIMATED

DELIVERY TIME

(DAYS)

33 CS MOD IV; VAN-SB-N+1-9X15-33-1R2G1B-30X30-C-B1 0P-1332-1946

34 CS MOD IV; VAN-SB-N+1-9X15-33-1R2G1B-30X30-C-B3 0P-1332-1947

35 Filter EN-1632

36 FILTER AIR;6"X8"X0.5", 30PPI, UL-900 CLASS II EN-2310

37 FILTER, AIR, 10.00"X10.00"X0.88" EN-1633

38 FINAL ASM, VFC-3000, NTCIP V1 0A-1248-0016

39 FINAL ASM, VFC-3000, NTCIP V2 0A-1248-0028

40 FUSE; ATM-15, AUTOMOTIVE, 32V, 15A, PLASTIC CASE F-1058

41 HARN, 12 MODULE CABLE, DC POWER, 2-2 PINS 0A-1325-3540

42 HARN, 12 MODULE CABLE, DC POWER, 4 PIN 0A-1600-4056

43 HARN, 1-25 MODULE SIGNAL 0A-1600-0002

44 HARN, 1-25 MODULE SIGNAL, 20MM 0A-1600-0050

45 HARN, 15 MODULE CABLE, DC POWER, 2-2 PINS 0A-1325-3541

46 HARN, 2 PIN F-MNL TO PIGTAIL, 14 AWG, DC 0A-1600-5000

47 HARN, 25 MOD PRIMARY, 20MM MODULES, VF24X0 0A-1600-0063

48 HARN, 6 MODULE CABLE, DC POWER, 2-PIN 0A-1600-4001

49 HARN, 6 MODULE CABLE, DC POWER, 4 PIN, 20MM 0A-1600-4050

50 HARN, 6 MODULE, 2 HIGH, DC POWER, 2 PIN 0A-1600-4002

51 HARN, 9 MODULE CABLE, DC POWER, 2 PIN 0A-1600-4000

52 HARN, 9 MODULE CABLE, DC POWER, 4 PIN, 20MM 0A-1600-4053

53 HARN, MOD TO PS, VF20X0, 4 LN, EX BAY LN #4 18" 0A-1309-3556

54 HARN, MOD TO PS, VF20X0, 4 LN, LN #4 18" 0A-1309-3554

55 HARN, PANEL BOARD/OUTLET 0A-1249-6022

56 HARN, SHORT MOD CBL, DC PWR, TOP TO BOTTOM 0A-1309-3527

57 HARN, SIGNAL, VM 20MM, 144 WIDE 0A-1447-3703

58 HARN, SNAP DISC THERMOSTAT 0A-1309-3725

59 HARN, TC, FAN, SNAP DISK THERMOSTAT 0A-1249-6110

60 HARN, VM 20MM, DC MOD POWER, 64 WIDE 0A-1447-3782

61 LIGHT ASSY, 336S, 19" RACK, DBL LIGHT, DBL DOOR 0A-1249-2023

62 LIGHT LEVEL DETECTOR 0P-1151-0002

63 LIGHT SENSOR RETROFIT KIT TO 0P-1247-0040 0A-1247-6501

64 LVDB; POINT OF LOAD, 24VDC, COATED 0P-1247-2001

65 M3 CNTRLR III,3500,8CONN,J1087,TB,COATED 0A-1382-0016

66 MACH SCR; M4 X 0.7 X 8MM, PHIL PAN HEAD, ZN PLTD HC-1224

67 MOD IV; VAN-9X5-66-3AX2-15X15-C-B2,SLOT 0A-1332-4906

68 MOD IV; VAN-SB-9X5-44-2AX2-30X30-C-B1 0P-1332-3015

69 MOD IV; VAN-SB-9X5-44-2AX2-30X30-C-B2 0P-1332-3016

70 MOD IV; VAN-SB-9X5-66-2AX2-15X15-C-B1 0P-1332-4942

71 MOD IV; VAN-SB-N+1-9X15-33-1R2G1B-30X30-C-B2 0Z-22210-0100M

72 MOD IV; VAN-SB-N+1-9X15-33-1R2G1B-30X30-C-B2 0Z-21671-0100M

73 MOD IV; VAN-SB-N+1-9X5-66-2AX2-15X15-C-B2 0P-1332-4955

74 MOD IV; VAN-SB-N+1-9X5-66-2AX2-15X15-C-B3 0P-1332-4956

75 MOD IV; VAN-SB-N+1-9X5-66-4AX2-30X30-C-B3 0P-1332-5031

76 MOD IV; VAN-SB-N+1-9X5-66-4AX2-30X30-C-B6 0P-1332-5034

77 MOD IV; VAN-SB-N+1-9X5-66-4AX2-30X30-C-B9 0P-1332-5037

78 MOD IV; VAN-SB-N+1-M-24X16-20.6-1R1G1B-30-C-BL 0P-1332-8352

79 MOD; AF-3500-8X8-34-1R1G1B-35X70-P-2.0-B1 0A-1208-5550

80 MOD; AF-3550-16X16-20-1R1G1B-NSPX336A-6.2-P-B1 0A-1266-5650

NUMBER

PART DESCRIPTION PART NUMBER

UNIT

PRICE

ESTIMATED

DELIVERY TIME

(DAYS)

81 MOD-CB10.15PAD0CT00-20.6MN-RGB-16X16-30X30 PADS FW 0P-1971-4200

82 MOD-CB10.22PAD0CT00-20.6MN-RGB-16X16-30X30 0P-1971-4350

83 MOD-CB10.22PAD0CT00-20.6MN-RGB-16X16-30X30 NO STO 0P-1971-4250

84 MOD-CB10.22PAD0CT00-20.6MN-RGB-24X16-30X30-W/ STO 0P-1971-4600

85 MOD-CB10.22PAD0CT01-20.6MN-RGB-16X16-30X30 0P-1971-4300

86 MOD-CB10.22PAD0CT01-20.6MN-RGB-24X16-30X30 0P-1971-4750

87 MOD-CB10.22PAD0CT01-20.6MN-RGB-24X16-30X30 0P-1971-4700

88 MOD-CB10.22PAD0CT01-20.6MN-RGB-24X16-30X30-3N1 0P-1971-4850

89 MOD-CB10.22PAD0CT01-20.6MN-RGB-24X16-30X30-3N1-W/S 0P-1971-4800

90 Module 0A-1253-3020

91 Module 0A-1253-1503

92 Module 0A-1253-1000

93 Module 0A-1253-3501

94 Module 0P-1332-1569

95 Module 0P-1332-4251

96 Module 0P-1332-1850

97 Module (96X400) 0P-1971-4775

98 NO CAN TERM. TEMP/LIGHT SENSOR, IN, COATED ITS 0P-1247-0040

99 Panel, Outlet, 12 POS Panel Board 0M-224236

100 PARALLEL SURGE (SPD), 120/240V, W/CNTS, 160KA A-5028864

101 PARALLEL SURGE (SPD), 120/240V, W/CNTS, 80KA A-3732

102 PARALLEL SURGE (SPD), 120V, W/CNTS, 160KA A-5028865

103 POWER SUPPLY; 24V, 90-264VAC, 1000W, SSI CONNECTOR A-1856R

104 POWER SUPPLY; 3-6.5V, 90-264VAC, 135W, IP65 RATED A-2307

105 PROTO-WT; VANGUARD CONTROL BOARD; PROLINK 6 0P-1248-4200

106 QC ASSY, AF-3500 MIRROR TO PRIMARY CONVERSION 0A-1327-1047

107 QUICK CONNECT; INPUT, SERIAL, CAN, COATED 0P-1415-2000

108 RACKMOUNT SUPPORT SHELF 0M-185862

109 RACKMOUNT SUPPORT SHELF MTG BKT 0M-185863

110 RADIAL FAN;190X190X69,>365CFM,115VAC,0.65A B-1054

111 RADIAL FAN;190X63,>365CFM,115VAC,0.65A B-1061

112 RELAY; 25AMP SOLID STATE AC OUTPUT,DC INPUT; K-1025

113 RELAY;SOLIDSTATE,INPUT3-32VDC,3-60VDCTRANSOUTPUT K-1036

114 SERIES TO PARALLEL SURGE UPDATE KIT, 2W+G, 120 VAC 0A-1247-9100

115 SERIES TO PARALLEL SURGE UPDATE KIT, 3W+G, 120/240 0A-1247-9101

116 STANDOFF, M4X12X0.7 THREAD, M-F, HEX, ALUMINUM HE-1404

117 SURGE PROTECTOR, RS422 0P-1146-0031

118 SURGE SUPPRESSOR (SPD), 120V, W/DRY CONTACTS A-3690

119 SURGE SUPPRESSOR, 24 VDC, PROTECTS + AND - TO GND, A-3184

120 SURGE SUPPRESSOR, PARALLEL 120/240VAC W/RELAX CONT A-2139

121 SURGE SUPPRESSOR, SERIES, 15A, 120V AC A-3212886

122 SURGE SUPRESSOR, PARALLEL 120/208VAC W/DRY CONTACT A-2442

123 SURGE, DIN RAIL, 24VDC, 20KA, NO NC REMOTE CONTACT A-4046772

124 TRANS; 10V CT @ 3A SEC, 115V PRI T-1119

125 UPS A-2757

126 UPS, ALPHA FXM2000, 120VAC, 48VDC, 16.6A, SNMP A-2480

127 UPS; 120 VAC, SMARTRM, 1000VA, 1RU TRIPP LITE, USB A-2360

128 VANGUARD CONTROL BD; MULTI-MODE, 10-LINE, C 0P-1248-0022

NUMBER

PART DESCRIPTION PART NUMBER

UNIT

PRICE

ESTIMATED

DELIVERY TIME

(DAYS)

129 VANGUARD, N+1, FET, ISO BOARD +5-24 VDC IN, CTD 0P-1247-2500

130 VANGUARD, N+1, FET, ISOLATION BOARD 0P-1447-2000

131 WASHER; #8 SPLIT LOCK, ZN PLTD, MEDIUM HC-1097

BID SHEET TOTAL:

MFMP Transaction Fee:

All payment(s) to the vendor resulting from this competitive solicitation WILL be subject to the MFMP Transaction Fee in accordance with the attached Form PUR 1000 General Contract Condition #14. The Transaction Fees imposed shall be based upon the date of issuance of the payment.

NOTE: In submitting a response, the bidder acknowledges they have read and agree to the solicitation terms and conditions and their submission is made in conformance with those terms and conditions.

Do Not enter “0” for any item on the bid sheet. A price must be entered for all unit prices. If any unit prices are left blank, the bid shall be considered as non-responsive.

No set volume of purchases is intended to be guaranteed and the unit prices above are shown for purposes of determining the BID SHEET TOTAL. Low bidder will be determined by the “Bid Sheet Total” bid amount

ACKNOWLEDGEMENT: I certify that I have read and agree to abide by all terms and conditions of this solicitation and that I am authorized to sign for the bidder. I certify that the response submitted is made in conformance with all requirements of the solicitation.

Bidder: FEID# .

Address: City, State, Zip: .

Phone: E-mail:

Authorized Signature: Date:

Print Name: Title: .

ORDERING INSTRUCTIONS

Bid Number: DOT-ITB-23-6185BJ

Title: DAKTRONICS DYNAMIC MESSAGE SIGN (DMS) PARTS

NOTE: ALL ORDERS SHOULD BE DIRECTED TO:

FEDERAL EMPLOYER IDENTIFICATION NUMBER (FEID):

VENDOR:

ADDRESS:

CITY, STATE, ZIP:

TELEPHONE:

TOLL FREE NO.:

DELIVERY: DELIVERY WILL BE MADE WITHIN DAYS AFTER RECEIPT

OF PURCHASE ORDER.

PRODUCT INFORMATION: DIRECT QUESTIONS TO:

NAME & TITLE:

ADDRESS:

CITY, STATE, ZIP:

TELEPHONE:

TOLL FREE NO.:

E-MAIL ADDRESS:

WEB ADDRESS:

Will you accept the State of Florida Purchasing Card (VISA)? Yes No

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS

DAKTRONICS DYNAMIC MESSAGE SIGN (DMS) PARTS

I. OBJECTIVE

The Florida Department of Transportation (FDOT) District Six Transportation Systems Management and Operations (TSM&O) Unit (hereinafter known as the “Department”) seeks a Vendor to furnish

Daktronics Dynamic Message Sign (DMS) Parts. The term of the Contract shall begin from the date of the Notice to Proceed and may continue for a period of one (1) year, with the possibility of a one-year renewal, subject to mutual agreement between the Department and the Vendor.

II. VENDOR RESPONSIBILITIES

During the term of the Contract, the Vendor shall be responsible for the following:

1. Provide parts for Daktronics DMS as noted in this Contract Documents. The Vendor shall submit a signed and completed Bid Sheet with their proposed unit costs and delivery time for the parts to the Department.

2. Provide all parts listed in the Bid Sheet. Provide parts that are new and unused.

3. Provide additional parts to support new Daktronics DMS that are not part of the

Department's DMS inventory at the time of the advertisement of this ITB, upon request by the Department. At such time, the Contract Documents will be amended to include these additional parts, after both parties have mutually agreed to the compensation and delivery time.

4. Provide new parts as needed to replace the original parts listed in the Contract Documents, due to changes in the manufacturing process, including but not limited, discontinued parts.

The unit price for all substitute parts shall be equal to the unit price included in the original

Bid Sheet submitted to the Department, unless otherwise agreed upon by the Department.

5. Provide parts upon receiving the request from the Department in accordance with the

Ordering Instructions or an Electronic Purchase Order. No work activity under this Contract shall start without authorization issued by the Department’s Project Manager (or his/her designee).

6. Delivery must be made on or before the estimated delivery time provided in the bid sheet.

7. Deliver all parts to SunGuide Transportation Management Center (TMC) located at 1001

NW 111 Avenue, Miami, Florida 33172.

8. Furnish replacements for any parts that are damaged during shipment at no cost to the

Department.

PART DESCRIPTION PART NUMBER

ASSY, 12 POS RACKMT PANEL BRD, PAR. SURGE 0A-1249-3010

ASSY, 2 FAN & SNAP-DISK THERMOSTAT, 336S 0A-1249-2031

ASSY, HARN, 1-21 MODULE SIGNAL 0A-1309-3620

ASSY, HARN, 22 MODULE SIGNAL, 12" MODULES, 5 DOOR 0A-1325-3628

ASSY, HARN, 22-29 MODULE STRING 0A-1309-3621

ASSY, HARN, 9 MODULE CABLE, DC POWER, 4 PIN 0A-1309-3560

ASSY, IMPELLER AND EN-1632 FILTER DOOR 0A-1309-0205

ASSY, LIGHT SENSOR M2+, 3.5 FT 0A-1327-3000

ASSY, MINI CAN I/O, TC, TWO DOOR 0A-1249-4003

ASSY, T-STAT W/HARN, STD PINOUT, 85CLOSE-65OPEN CE 0A-1327-3104

ASSY, VANGUARD FIELD CONTROLLER 0A-1248-0070

ASSY; POWER SUPPLY, ISO BOARD, MTG 0A-1589-0501

ASSY; POWER SUPPLY, ISO BOARD, MTG, VF-2*** 0A-1993-0105

ASSY; POWER SUPPLY, MTG BRKT, & ISO BOARD 0A-1447-4601

AXIAL FAN; 172X150X51, >245CFM, 115VAC, 0.4A B-1075

AXIAL FAN; NCNR,172X150X51, > 269CFM, 24VDC, 1.20A B-1096

AXIAL FAN;120X120X38,>134CFM,115VAC, 22 WATT, B-1053

CAN DC I/O; 16IN/12OUT, OC, REG, COATED 0P-1247-4009

CAN DC I/O; 24 INPUT,5V,COATED 0P-1247-0009

CAN DIST BD;CAN 1-10, 5V, COATED, CR1105 0P-1248-0005

CAN DIST BD;CAN 1-10, REG, COATED, CR1105 0P-1248-0011

CAN DIST BD;CAN 1-5, REG, COATED, CR1105 0P-1248-0012

CAN TEMP & LIGHT DETECTOR II, REG, COATED 0P-1247-0019

CAN TEMP/HUM. & LIGHT DET. II, +5V, COATED 0P-1247-0021

CAN TEMP/HUM. & LIGHT DETECTOR II, REG, COATED 0P-1247-0015

CAN TEMP/LIGHT SENSOR, 4-48VDC IN, COATED 0P-1247-0038

CAN TEMP/LIGHT SENSOR, 4-48VDC IN, COATED ITS 0P-1247-0039

CAN TEMP/LIGHT SENSOR, 4-48VDC IN, CONDUIT, COATED 0P-1247-0041

CAN TEMP/LIGHT, COATED, W/O BUS TERM 0P-1247-0003

Controller 0A-1249-5014

Controller 0A-1248-2012

CS MOD IV; VAN-SB-N+1-9X15-33-1R2G1B-30X30-C-B1 0P-1332-1945

PART DESCRIPTION PART NUMBER

CS MOD IV; VAN-SB-N+1-9X15-33-1R2G1B-30X30-C-B1 0P-1332-1946

CS MOD IV; VAN-SB-N+1-9X15-33-1R2G1B-30X30-C-B3 0P-1332-1947

Filter EN-1632

FILTER AIR;6"X8"X0.5", 30PPI, UL-900 CLASS II EN-2310

FILTER, AIR, 10.00"X10.00"X0.88" EN-1633

FINAL ASM, VFC-3000, NTCIP V1 0A-1248-0016

FINAL ASM, VFC-3000, NTCIP V2 0A-1248-0028

FUSE; ATM-15, AUTOMOTIVE, 32V, 15A, PLASTIC CASE F-1058

HARN, 12 MODULE CABLE, DC POWER, 2-2 PINS 0A-1325-3540

HARN, 12 MODULE CABLE, DC POWER, 4 PIN 0A-1600-4056

HARN, 1-25 MODULE SIGNAL 0A-1600-0002

HARN, 1-25 MODULE SIGNAL, 20MM 0A-1600-0050

HARN, 15 MODULE CABLE, DC POWER, 2-2 PINS 0A-1325-3541

HARN, 2 PIN F-MNL TO PIGTAIL, 14 AWG, DC 0A-1600-5000

HARN, 25 MOD PRIMARY, 20MM MODULES, VF24X0 0A-1600-0063

HARN, 6 MODULE CABLE, DC POWER, 2-PIN 0A-1600-4001

HARN, 6 MODULE CABLE, DC POWER, 4 PIN, 20MM 0A-1600-4050

HARN, 6 MODULE, 2 HIGH, DC POWER, 2 PIN 0A-1600-4002

HARN, 9 MODULE CABLE, DC POWER, 2 PIN 0A-1600-4000

HARN, 9 MODULE CABLE, DC POWER, 4 PIN, 20MM 0A-1600-4053

HARN, MOD TO PS, VF20X0, 4 LN, EX BAY LN #4 18" 0A-1309-3556

HARN, MOD TO PS, VF20X0, 4 LN, LN #4 18" 0A-1309-3554

HARN, PANEL BOARD/OUTLET 0A-1249-6022

HARN, SHORT MOD CBL, DC PWR, TOP TO BOTTOM 0A-1309-3527

HARN, SIGNAL, VM 20MM, 144 WIDE 0A-1447-3703

HARN, SNAP DISC THERMOSTAT 0A-1309-3725

HARN, TC, FAN, SNAP DISK THERMOSTAT 0A-1249-6110

HARN, VM 20MM, DC MOD POWER, 64 WIDE 0A-1447-3782

LIGHT ASSY, 336S, 19" RACK, DBL LIGHT, DBL DOOR 0A-1249-2023

LIGHT…