Attachment_5.b_Seq_Listing_CD_Burning.pdf

Attachment 5.b

Copying Sequence Listing for ISA

IAP Sequence Listing CD Burning

The presence of the form below indicates that the POWER network drive contains a

Sequence Listing that must be burned to CD.

To access the Sequence Listing in the POWER folder

After printing the documents from IFW, go to the following POWER folder: \\w-power-

11\power\WIPO\SEQLIST to locate the sequence listing that must be burn into a CD.

file://w-power-11/power/WIPO/SEQLIST file://w-power-11/power/WIPO/SEQLIST

Click on “RAW”.

The RAW folder will open.

Click the PCT number corresponding to the Sequence Listing you need to copy onto a

CD. For example, if you need to copy the Sequence Listing for PCT/US05/01147, click

PCTUS2005001147 as shown.

The PCTUS2005001147 folder will open.

Right-click over the “Sequence_ST25.txt” file.

This will display the window file operation menu. Select “Send To” “DVD-RW

Drive”.

This will display the following Windows message at the lower right corner of your desktop screen: “You have files waiting to be written to the CD”.

A message on your monitor will inform you that you have files on your computer.

Double-click on the icon on your task bar. This will open the DVD-R Drive below.

Place a CD-R in your DVD-R drive on your computer. This will be the lower CD drive.

Click on File from menu bar

Click on Write these files to CD

The CD Writing Wizard will open. Click on Next.

The CD Writing Wizard will show that the files are burning to the CD-R.

When the CD Writing Wizard is complete, select Finish

The CR-R Drive on your CPU will open.

Remove the CD-R, write the PCT number on the CD-R using indelible ink.

Place the CD-R in a jewel case (CD case)

Enclose with the ISA copy

Currently, for PCT international applications sequence listing CDs are burned for ISA/AU, ISA/EP and ISA/KR.