DMES 60x60x15 Rev C.pdf
PDF 604 KB Posted
- Attached to
- Tide Station Elevated Platform Federal contract opportunity
- Solicitation number
- NC-NT2000-23-01061
About this file
This document package contains engineering drawings for a dual mast enclosure stand structural assembly. The drawings specify all components of the structural frame assembly including the enclosure frame base, supports, stand frame, clamps and fasteners. Dimensions, materials, notes and a bill of materials are provided for each component. The related federal contract opportunity is a solicitation from the Department of Commerce National Oceanic and Atmospheric Administration for a Tide Station Elevated Platform, seeking an engineered structural assembly design as documented in the engineering drawings to specification.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| MWWL 30 Inch Fixed Arm.pdf | ||
| Statement of Work NC-NT2000-23-01061.pdf | ||
| Port Fourchon Station.pdf | ||
| Elevated Platform.pdf | ||
| RFQ NC-NT2000-23-01061.pdf | ||
| MWWL Geodetic Collar Rev D.FERS.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
National Ocean Service Center for Operational
Oceanographic Products and Services
DESIGN BY
DRAWN BY
APPROVED BY
REVISED BY
REVISION
C
ST
AT
IO
N
S
TR
U C
TU
R
AL
C
O M
PO
N
EN
TS
X6
0X
D U
AL
M
AS
T
EN
C
LO
SU
R E
ST
AN
D
SHEET OF 07
BLS 3/10/2010
BLS 06/03/2014
FERS 06/09/2014
JLIB 10/25/2016
C O
VE
R
S H
EE
T
DMES_60X60X15.DWG
PERCENT COMPLETE
100%
CS-01
DRAWING INDEX
SHEET DWG NO TITLE
01 CS-01 COVER SHEET
02 S-01A ENCLOSURE FRAME BASE
03 S-01B ENCLOSURE FRAME BASE
04 S-02 ENCLOSURE FRAME SUPPORTS
05 S-03 ENCLOSURE STAND FRAME
06 S-04 ENCLOSURE CLAMP
07 AS-01 ENCLOSURE FRAME ASSEMBLY
STATION STRUCTURAL COMPONENTS
60x60x15 DUAL MAST ENCLOSURE STAND
Oceanographic Products and Services
DESIGN BY
DRAWN BY
APPROVED BY
REVISED BY
REVISION
C
ST
AT
IO
N
S
TR
U C
TU
R
AL
C
O M
PO
N
EN
TS
X6
0X
D U
AL
M
AS
T
EN
C
LO
SU
R E
ST
AN
D
SHEET OF 07
BLS 3/10/2010
BLS 06/03/2014
FERS 06/09/2014
JLIB 10/25/2016
FR
AM
E
BA
SE
M O
U N
TI
N
G H
O
LE
P
AT
TE
R
N
DMES_60X60X15.DWG
PERCENT COMPLETE
100%
S-01A
FINISH: REMOVE ALL BURRS, BREAK
ALL SHARP EDGES AND CORNERS.
SURFACE: STOCK MILL FINISH
DRAWING SIZE ANSI D
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERENCES ARE:
FRACTION DECIMALS ANGLES
± 1/16 ± .X ±.1 ± 0.5°
± .XX ±.06
± .XXX ±.010
DO NOT SCALE DRAWING
FRONT VIEW
7/8 x 1.5 LONG SLOT, 8 PLACES
27.500 27.500
7/8 DRILL, 6 PLACES, SEE NOTE 5
SHEET NOTES:
1. MATERIAL IS 6061-T6 ALUMINUM, UNLESS OTHERWISE
NOTED.
2. USE 4043 FILLER WIRE FOR ALL WELDS.
3. GRIND FLUSH TO MATERIAL ON TOP.
4. GRIND FLUSH TO MATERIAL ON BOTTOM.
5. DRILL HOLES AFTER WELDING THIS SECTION.
BILL OF MATERIALS
ITEM DESCRIPTION
1 3 x 3 x .375 ANGLE 2 4 x 3 x .375 ANGLE
A
A
SECTION A-A
20.25
15.00
18.00 TYP
TYP; SEE NOTE 417.25
8.88
8.88
16.3816.38
1/8
CJP; 4 PLACES; SEE NOTE 4
60°
1/8
CJP; 4 PLACES; SEE NOTE 3
60°
31.50 31.50
B B
SECTION B-B
C C
SECTION C-C
65.5
4.750
4.750
60.3
Oceanographic Products and Services
DESIGN BY
DRAWN BY
APPROVED BY
REVISED BY
REVISION
C
ST
AT
IO
N
S
TR
U C
TU
R
AL
C
O M
PO
N
EN
TS
X6
0X
D U
AL
M
AS
T
EN
C
LO
SU
R E
ST
AN
D
SHEET OF 07
BLS 3/10/2010
BLS 06/03/2014
FERS 06/09/2014
JLIB 10/25/2016
FR
AM
E
BA
SE
M O
U N
TI
N
G H
O
LE
P
AT
TE
R
N
DMES_60X60X15.DWG
PERCENT COMPLETE
100%
S-01B
FINISH: REMOVE ALL BURRS, BREAK
ALL SHARP EDGES AND CORNERS.
SURFACE: STOCK MILL FINISH
DRAWING SIZE ANSI D
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERENCES ARE:
FRACTION DECIMALS ANGLES
± 1/16 ± .X ±.1 ± 0.5°
± .XX ±.06
± .XXX ±.010
DO NOT SCALE DRAWING
FRONT VIEW
7/8 x 1.5 LONG SLOT, 8 PLACES
27.500 27.500
7/8 DRILL, 6 PLACES, SEE NOTE 5
SHEET NOTES:
1. MATERIAL IS 6061-T6 ALUMINUM, UNLESS OTHERWISE
NOTED.
2. USE 4043 FILLER WIRE FOR ALL WELDS.
3. GRIND FLUSH TO MATERIAL ON TOP.
4. GRIND FLUSH TO MATERIAL ON BOTTOM.
5. DRILL HOLES AFTER WELDING THIS SECTION.
BILL OF MATERIALS
ITEM DESCRIPTION
1 3 x 3 x .375 ANGLE 2 4 x 3 x .375 ANGLE
20.25
15.00
18.00 TYP
TYP; SEE NOTE 417.25
1/8
CJP; 4 PLACES; SEE NOTE 4
60°
1/8
CJP; 4 PLACES; SEE NOTE 3
60°
4.750
4.750
60.3
A
A
SECTION A-A
B B
SECTION B-B
65.5
1.3 TYP
4.8 TYP 1.3 TYP
4.8 TYP
C C
SECTION C-C
Oceanographic Products and Services
DESIGN BY
DRAWN BY
APPROVED BY
REVISED BY
REVISION
C
ST
AT
IO
N
S
TR
U C
TU
R
AL
C
O M
PO
N
EN
TS
X6
0X
D U
AL
M
AS
T
EN
C
LO
SU
R E
ST
AN
D
SHEET OF 07
BLS 3/10/2010
BLS 06/03/2014
FERS 06/09/2014
JLIB 10/25/2016
EN
C
LO
SU
R E
FR
AM
E
SU
PP
O
R
TS
DMES_60X60X15.DWG
PERCENT COMPLETE
100%
S-02
SHEET NOTES:
1. MATERIAL IS 6061-T6 ALUMINUM, UNLESS OTHERWISE
NOTED.
2. USE 4043 FILLER WIRE FOR ALL WELDS
FINISH: REMOVE ALL BURRS, BREAK
ALL SHARP EDGES AND CORNERS.
SURFACE: STOCK MILL FINISH
DRAWING SIZE ANSI D
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERENCES ARE:
FRACTION DECIMALS ANGLES
± 1/16 ± .X ±.1 ± 0.5°
± .XX ±.06
± .XXX ±.010
DO NOT SCALE DRAWING
ENCLOSURE FRAME VERTICAL SUPPORT (2 REQ'D)
1.00 3.50
66.50 69.00
70.00
UPPER ENCLOSURE FRAME HORIZONTAL SUPPORT
LOWER ENCLOSURE FRAME HORIZONTAL SUPPORT
1.00 3.50
19.19 35.00
50.81 66.50
69.00 70.00
7/16 x .75 LONG SLOT, 4 PLACES
7/16 x .75 LONG SLOT, 4 PLACES
BILL OF MATERIALS
ITEM DESCRIPTION
1 4 x 4 x .375 ANGLE 2 4 x 1.647 CHANNEL 3 2 x .25 FLAT BAR, AISI 316L STAINLESS STEEL
5/8 DRILL, 5 PLACES
81.63
58.00
27.5027.50
7/8 DRILL,
3 PLACES
ENCLOSURE BOLT DOWN BAR (2 REQ'D)
Oceanographic Products and Services
DESIGN BY
DRAWN BY
APPROVED BY
REVISED BY
REVISION
C
ST
AT
IO
N
S
TR
U C
TU
R
AL
C
O M
PO
N
EN
TS
X6
0X
D U
AL
M
AS
T
EN
C
LO
SU
R E
ST
AN
D
SHEET OF 07
BLS 3/10/2010
BLS 06/03/2014
FERS 06/09/2014
JLIB 10/25/2016
EN
C
LO
SU
R E
ST
AN
D F
R
AM
E
DMES_60X60X15.DWG
PERCENT COMPLETE
100%
S-03
FINISH: REMOVE ALL BURRS, BREAK
ALL SHARP EDGES AND CORNERS.
SURFACE: STOCK MILL FINISH
DRAWING SIZE ANSI D
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERENCES ARE:
FRACTION DECIMALS ANGLES
± 1/16 ± .X ±.1 ± 0.5°
± .XX ±.06
± .XXX ±.010
DO NOT SCALE DRAWING
61.00
2 PLACES
4 4
BILL OF MATERIALS
ITEM QTY DESCRIPTION
1 1 FRAME BASE, SHEET S-01A OR S-01B
2 1 LOWER ENCLOSURE FRAME
HORIZONTAL SUPPORT, SHEET S-02
3 1 UPPER ENCLOSURE FRAME
HORIZONTAL SUPPORT, SHEET S-02
4 2 ENCLOSURE FRAME VERTICAL
SUPPORT, SHEET S-02
TYP
82.38
4.50
SHEET NOTES:
1. MATERIAL IS 6061-T6 ALUMINUM, UNLESS OTHERWISE
NOTED.
2. USE 4043 FILLER WIRE FOR ALL WELDS
3. FRAME BASE SHOWN WITH MOUNTING HOLE PATTERN 1.
21.00
77.28
TYP TYPFRONT VIEW
TOP VIEW
SIDE VIEW
Oceanographic Products and Services
DESIGN BY
DRAWN BY
APPROVED BY
REVISED BY
REVISION
C
ST
AT
IO
N
S
TR
U C
TU
R
AL
C
O M
PO
N
EN
TS
X6
0X
D U
AL
M
AS
T
EN
C
LO
SU
R E
ST
AN
D
SHEET OF 07
BLS 3/10/2010
BLS 06/03/2014
FERS 06/09/2014
JLIB 10/25/2016
EN
C
LO
SU
R E
C
LA
M P
DMES_60X60X15.DWG
PERCENT COMPLETE
100%
S-04
FINISH: REMOVE ALL BURRS, BREAK
ALL SHARP EDGES AND CORNERS.
SURFACE: STOCK MILL FINISH
DRAWING SIZE ANSI D
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERENCES ARE:
FRACTION DECIMALS ANGLES
± 1/16 ± .X ±.1 ± 0.5°
± .XX ±.06
± .XXX ±.010
DO NOT SCALE DRAWING
2.46
1.92
5/8 DRILL
4.67
SHEET NOTES:
1. MATERIAL IS 1/4 THICK x 3 WIDE AISI 316 STAINLESS STEEL
PLATE.
2. USE EPOXY TO ATTACH 1/8 THICK BEARING PAD TO THESE
SURFACES ON THE INSIDE AREA OF CLAMP THAT MATES TO
ENCLOSURE TOP.
SEE NOTE 2
7.38
1.10
1.50
100°
75°
5.41
85°
FRONT VIEW
TOP VIEW
SIDE VIEW
3.05
Oceanographic Products and Services
DESIGN BY
DRAWN BY
APPROVED BY
REVISED BY
REVISION
C
ST
AT
IO
N
S
TR
U C
TU
R
AL
C
O M
PO
N
EN
TS
X6
0X
D U
AL
M
AS
T
EN
C
LO
SU
R E
ST
AN
D
SHEET OF 07
BLS 3/10/2010
BLS 06/03/2014
FERS 06/09/2014
JLIB 10/25/2016
EN
C
LO
SU
R E
FR
AM
E
AS
SE
M
BL
Y
DMES_60X60X15.DWG
PERCENT COMPLETE
100%
AS-01
FINISH: REMOVE ALL BURRS, BREAK
ALL SHARP EDGES AND CORNERS.
SURFACE: STOCK MILL FINISH
DRAWING SIZE ANSI D
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERENCES ARE:
FRACTION DECIMALS ANGLES
± 1/16 ± .X ±.1 ± 0.5°
± .XX ±.06
± .XXX ±.010
DO NOT SCALE DRAWING
SHEET NOTES:
1. ENCLOSURE CLAMPS ARE ATTACHED AFTER THE ENCLOSURE IS
BOLTED TO THE ENCLOSURE FRAME BASE. USE ALL THREAD,
WASHERS, AND A SINGLE NUT AT EACH END TO PLACE ENOUGH
CLAMPING FORCE ON THE TOP OF THE ENCLOSURE TO PROVIDE
SUPPORT BUT NOT DEFORM THE ENCLOSURE. ADD THE SECOND
NUT AT EACH END TO LOCK THE ASSEMBLY.
2. MAST DETAILS (MASTS NOT SHOWN):
2.1. TYPICAL MAST IS A 1.5 INCH SCH 80 PIPE, 6061-T6 ALUMINUM,
10 FEET LONG.
2.2. THE MAST IS THREADED ON ONE END, WITH A THREADED
UNION COUPLING POSITIONED AT THE BOTTOM.
2.3. THE MAST IS MOUNTED TO THE VERTICAL SUPPORTS WITH 2 X
3/8 STAINLESS STEEL MUFFLER CLAMPS, JEGS PERFORMANCE
PRODUCTS #555-30720 OR EQUIVALENT.
2.4. THE BOTTOM OF THE MAST IS ATTACHED TO THE BOTTOM OF
THE ENCLOSURE USING 1.5 INCH LIQUIDTIGHT CONDUIT (CUT
TO FIT) WITH 2 THOMAS & BETTS LIQUIDTIGHT FITTINGS
CATALOG NUMBER LT43H OR EQUIVALENT.
2.5. A 1.5 INCH ALUMINUM SERVICE ENTRANCE WITH CABLE
CUTOUTS IS INSTALLED AT THE TOP OF THE MAST FOR
SENSOR, ANTENNA, AND SOLAR PANEL CABLE RUNS.
3. FRAME BASE SHOWN WITH MOUNTING HOLE PATTERN 1.
BILL OF MATERIALS
ITEM QTY DESCRIPTION
1 3 1/2-13NC X 18 LONG ALL THREAD, AISI 316L
STAINLESS STEEL
2 12 1/2-13NC NUT, AISI 316L STAINLESS STEEL
3 6 1/2 FLAT WASHER, AISI 316L STAINLESS
STEEL
4 3 ENCLOSURE CLAMP, SHEET S-04
5 1 60x60x15 APX ENCLOSURE
6 1 ENCLOSURE STAND FRAME, SHEET S-03
7 2 ENCLOSURE BOLT DOWN BAR, SHEET S-02
8 6 3/4-10NC X 2.5 LONG BOLT, AISI 316L
STAINLESS STEEL
9 12 3/4 FLAT WASHER, AISI 316L STAINLESS
STEEL
10 6 3/4 FLAT WASHER, NYLON
11 6 3/4 LOCK WASHER, AISI 316L STAINLESS
STEEL
12 6 3/4-10NC NUT, AISI 316L STAINLESS STEEL
12234322
FRONT VIEW
TOP VIEW
SIDE VIEW
A A
SECTION A-A
8951112 9
SEE NOTE 1
| Sheets and Views |
| DMES_60x60x15-COVER SHEET |
| DMES_60x60x15-Frame Base - Mounting Hole Pattern 1 |
| DMES_60x60x15-Frame Base - Mounting Hole Pattern 2 |
| DMES_60x60x15-Enclosure Frame Supports |
| DMES_60x60x15-Enclosure Stand Frame |
| DMES_60x60x15-Enclosure Clamp |
| DMES_60x60x15-Enclosure Frame Assembly |
File details come from the government source that posted it. Updated .