3303- Round 2 Questions.docx
DOCX document 16 KB Posted
- Attached to
- Concealable Holsters
- Solicitation number
- DJF-23-0200-PR-0003303-2
About this file
This document contains questions and answers regarding solicitation number DJF-23-0200-PR-0003303-2 from the Department of Justice Federal Bureau of Investigation Headquarters Division for concealable holsters. The solicitation requires the supply of Comp-Tac Warrior right- and left-handed holsters or equivalent to fit both Glock 17 and 19 pistols, without modification, in the quantities specified. While samples are not needed for submission, any alternative holster models must include a complete specification sheet. The questions addressed confirm the valid part numbers for the Comp-Tac Warrior holsters and clarify that accommodating attached suppressors is not anticipated.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 3303- RFQ September 2023.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Questions and Answers Q. Under the Supplies or Services section of the solicitation, it states on one option that the Holsters must fit their respective Glock 17 Gen5 MOS and Glock 19 Gen5 MOS, but the other option states that the Holster SHALL NOT be modified to fit both pistols G17 and G19. Which one is it?
A. The holster needs to hold both the Glock 17, and 19, without a modification.
Q. Under the Supplies or Services section, there are two part numbers listed, (33713 and 47249). Are there any other supplies that needs to be ordered besides the right- and left-hand warrior holsters? If so, how many for the right and left?
A. No other parts need to be ordered. The RFQ is stating what the holster submitted must be capable of accommodating. The quantities for each are clearly requested in the table under section 2.0.
Q. We see that both line item 1 and line item 2 have the Model C703 as the designator. Can you advise if the government meant to have it as C708? C708 is the correct commercial part number for the Comp-Tac Warrior holster. Likewise, is there a breakdown between Glock 17 and Glock 19 models needed? Both quantities look to be referencing part numbers for the Glock 19 models.
A. The C703 is the correct number and will fit both pistols. I have verified this with Comp-Tac. Please reach out to them if you need further clarification.
Q. The model listed is C703 Comp Tac Warrior holsters or equivalent. We can find the C708 holster but not a C703. Please confirm if C703 and if C703 is there a picture of this holster front and back?
A. Please refer to Comp-Tac. The part number is valid.
Q. Will you need samples of our proposed holster offering with the quote submission and how many? We would be able to submit samples by Oct 31 if that is acceptable. How many RH and LH?
A. Samples will not be needed. If submitting a quote for other than the Comp-Tac Warrior, a complete spec sheet will be required as stated under section 4.2. Quantities for right- and left-handed holsters are clearly stated in the table under section 2.0.
Q. Will the suppressor ever be holstered with the pistol so we can make sure the opening is wide enough to accommodate this? How wide is the suppressor that will be used.
A. It is not anticipated to be holstered with the suppressor.
File details come from the government source that posted it. Updated .