Testing_and_Product_Expectation_Info.docx

Testing and Product Expectation Information for First Article Testing

First Article Testing will be conducted one (1) target of each design requested under this solicitation unless otherwise specified by the FBI. Vendor will submit one target each of:

12 X 12 Square 12 X 18 Rectangle Silhouette or Bottle

All Targets will be physically measured by the FBI to ensure they meet the measurements set forth in the solicitation requirements.

All welds on targets will be visually inspected by the FBI prior to testing to ensure there are no cracks in the welds. All welds on targets will be visually inspected by the FBI after testing to ensure there are no cracks in the welds.

All Targets will undergo a live fire test that will include, but not limited to, 2,000 rounds of 9mm and .40 caliber frangible handgun ammunition currently used by the FBI. All targets will be shot along all strike surfaces to include the base. The product must not incur any strike face defamation to pass this test.

Targets will undergo a live fire test that will include, but not limited to, 2,000 rounds of 9mm and .40 caliber frangible handgun ammunition to be shot at the edges along all strike surfaces to ensure strength at the cut line of the steel. All targets will be shot along all strike surfaces to include the base. The product must not incur any edge defamation to pass this test.

All welds of targets will be visually inspected by the FBI after testing. All targets will be shot along all strike surfaces to include the base. The product must not incur any cracks to pass this test.