17._Attachment_A_Specifications.pdf

Attachment A

POLE/REEL TRAILER SPECIFICATIONS

DE-SOL-0009228

POLE/REEL TRAILER SPECIFICATIONS

Basic Description

Brooks Brothers PTB 111-16KE or equal.

Salient Characteristics (required for award):

1. Infinite adjustable locking stanchions to allow for adequate pole security

a. All locking stanchion devices must be able to lock securely in any position along the rail. Stanchions with drilled holes with pins for adjustment do not meet this requirement.

2. Telescopic front and rear frame pull outs to adjust/center the load over a single axle to lessen the tongue weight so it can be towed by a 550 class vehicle. Both pull out extensions must be constructed of heavy duty rectangular tubing. All extensions must be equipped with greasable assist rollers and replaceable wear pads made of a durable material

3. Triple bolsters that are the full width of the trailer, each equipped with receiver pockets to install reel rack assemblies to be used as a reel trailer to haul three reels simultaneously

4. A Single 16,000 lbs. straight axle with dual wheels and 17.5 tires

a. Dual axle trailers do not meet the requirement

5. Three Length Adjustments: 24’ / 32’ / 40’

Desired Features/Specifications

Overall Width: 95” (approx.)

Bolster Height: 42” (approx.)

16,000 lbs. Single Straight Axle 215/75R17.5 Tires 17.5" x 6.75" Dual Rims Oil Bath Hubs, 10 Studs 12-1/4" x 5" Electric Brakes Adjustable Spring Pads for Wheel Alignment Reinforced Spring Hangers with 3” Structural C-Channel Crossmembers Pair - Mud Flaps Front Bolster: 95" Wide (approx.) Double C-Channel Front Bolster with 21" Stanchions Center Bolster: 95” Wide (approx.) Fixed 5” Double C-Channel Construction with 21” Stanchions

Rear Bolster: 95” Wide (approx.) Fixed 5” Double C-Channel Construction with 21” Stanchions Stanchions: (4) four - 21” Lever Lock, Sliding & Removable (infinite adjustment)

(4) four - Heavy Duty Ratchet Type Winch Binders with Breaker Bar

(4) four - 15’ L x 4” W x 12000 lbs. Nylon Straps 8” x 4” x 1/4" Wall Extendable Tongue with Extension Assist Roller and replaceable UHMW-PE Wear Pads 6-Position Adjustable Hitch Plate 2 1/2" Lunette Eye, 35000 lbs. Capacity 3/8” x 36”L Galvanized Safety Chains with Safety Hook and Anchor Shackle 7” Structural C-Channel A-Frame Drop Leg Jack, 12,000 lb. Static Load Capacity

REAR PULL OUT:

Adds approx 8' to Overall Length 8" x 4" Slide Extensions 5" Double C-Channel Bolster with 21" Stanchions 8” x 6” Tubular Steel Frame or greater 10” x 6” Receiver Tube 7” x 4 “Tubular Steel Crossmembers Under Rear Bolster or greater 3” Structural C-Channel Crossmembers or greater 1/8” or greater Steel Diamond Tread Plate Fender Construction Reinforced with 3” Structural C-Channel at Front and Rear of Fender or greater ICC & DOT Approved LED Lights Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights S.O. Cable Wiring Loom Wiring Loom Terminated in Junction Boxes Connections Soldered and Sealed with Heat Shrink Tubing Internal Wiring in Tongue 32” Pigtail w/ Electrical Plug, Terminated at Junction Box 6-Way Aluminum Die Cast Plug (Truck Side) in Rear Butt Tube for Light Bar Hook-Up Breakaway Kit with Sealed Lead Acid Battery & Trickle Charger Seams are to be sealed with Paintable Caulk Rust Prohibitive Epoxy Polyamide Primer Two-Part Acrylic Polyurethane black Topcoat