Henry County Developer Signage Design Intent Rev 0

PROJECT # 31769.00

08.07.2025

55 IVAN ALLEN JR. BLVD, SUITE 100 ATLANTA, GA 30308 P: 404.688.4702 W: SKYDESIGNGRAPHICS.COM

PROJECT #:

31769.00

TITLE:

Henry County Developer Signage

SIGN TYPE:

REV#: DATE: DRAWN BY:

#0.00 08.07.2025 BV/CW/TC

P A G E / S E T

NEW DRAWINGS

ISSUED WITH CHANGES

NO CHANGES

OMITTED

TITLE SHEET

DRAWING LIST

PROJECT FINISHES

PROJECT SPECIFICATIONS

DEVELOPER SIGNAGE - ELEVATIONS

DEVELOPER SIGNAGE - DETAILS

GRAPHIC PANELS - DETAILS

Drawing List

S I G N T Y P E D E S C R I P T I O N

K E Y S U B M I T T A L D A T E

Drawing List

D E S I G N I N T E N T

Drawing List

D es ig n

In te nt

R ev

.0 7.

TITLE:

Henry County Developer Signage

SIGN TYPE:

REV#: DATE: DRAWN BY:

#0.00 08.07.2025 BV/CW/TC

G E N E R A L N O T E S

- FIELD SURVEY IS REQUIRED PRIOR TO PRODUCING

FINAL SHOP DRAWINGS TO VERIFY ARCHITECTURAL

INTEGRITY & LAYOUT. ALL DRAWINGS IN THIS

PACKAGE ARE FOR INTENT ONLY. NO DIMENSIONS

HAVE BEEN CONFIRMED. RESPONSIBILITY FOR ALL

FIELD VERIFICATION LIES WITH SIGN FABRICATOR.

- ALL INSTALLATION/MOUNTING TO COMPLY WITH

LOCAL ORDINANCE/ADA

T Y P I C A L N O T E S

- REFER TO DRAWING NOTES FOR MATERIAL

THICKNESS AND/OR DIAMETER UNLESS

SPECIFICALLY NOTED IN THE FINISH SCHEDULE.

- BID ALTERNATE PRICING SHOULD BE INCLUDED ON

BID SUMMARY FORM IN THE CORRESPONDING BID

ALTERNATIVE COLUMN.

A S S E M B L Y S P E C I F I C A T I O N S

- ALL HARDWARE TO BE SECURED WITH LOCTITE OR

EQUIVALENT TO DETER VANDALISM.

F A B R I C A T I O N S P E C I F I C A T I O N S

- SEAMLESS CONSTRUCTION; ALL SEAMS/WELDS TO

BE FILLED, GROUND, SANDED, AND FINISHED

SMOOTH.

- NO VISIBLE FASTENERS UNLESS THEY ARE

SPECIFICALLY PART OF DESIGN INTENT.

- NO ALTERNATES MAY BE INTRODUCED UNLESS

CLEARLY OUTLINED BY CONTRACTOR AND

APPROVED BY OWNER AND DESIGNER.

- ALL CABINETS TO BE .125” ALUMINUM STOCK.

- ALL CHANNEL LETTERS TO BE MINIMUM .063”

ALUMINUM STOCK RETURNS AND .125” FRONT AND

REAR FACES UNLESS OTHERWISE SPECIFIED.

- CAP ENDS OF ALL TUBING UNLESS OTHERWISE

SPECIFIED.

General Notes3

Project Finishes1

P A I N T S C H E D U L E

- P1 Matthews Paint

Color to match finial and base

P R I N T C O L O R S

- CMYK 87, 46, 12, 0

- CMYK 57, 3, 100, 0

- CMYK 0, 0, 0, 60

H A R D W A R E S C H E D U L E

- H1 Brandon Industries 4” Square Finial

FINQ-C4 Cap Finial, BK Black

- H2 Brandon Industries Two-Piece Base

2PCQ-4, BK Black

- H3 ULINE Square Sign Post

H-5516 10 ft.

Project Logos2

Project Finishes

D E S I G N I N T E N T

Project Finishes

TITLE:

Henry County Developer Signage

SIGN TYPE:

REV#: DATE: DRAWN BY:

#0.00 08.07.2025 BV/CW/TC

The following design documents are for the sole purpose of conveying design intent and are not intended for construction purposes. The fabricator may make recommendations and/or changes to the details as shown in the drawings with written approval of the Owner’s representa-tive. The fabricator assumes all responsibility for signage integrity, engineering, field verification and measurements, etc. as part of the bid submittal process.

Sky Design and the Owner shall review all shop drawings for conformance with the design intent of these drawings only and will not be held responsible or liable for any results of construction from working drawings, materials selection, shop drawings, or any other agreements.

R E V I E W

• Site: The fabricator is responsible for verifying all site conditions with regards to fabrication and installation before manufacture of signage. Any conditions that would impede the proper and timely completion of the work should be presented to the Owner’s representative in writing.

• Sign Location Plans: Locations shown on the Sign Location Plans are for general placement. The fabricator shall confirm each sign location with the Owner’s representative and locate via stake and flag for verification.

• Fabricator shall notify the Owner’s representative of any discrepancies in the design documents or graphics schedule as well as discrepancies in field dimensions or field conditions (drainage pipes, etc.) that would require changes in sign construction details. All discrepancies shall be brought to the attention of the Owner’s representative prior to production.

• Any conflicting conditions with signage that are not coordinated prior to the manufacturing of the scope of work will need to be addressed in the punchlist phase and will be the responsibility of the vendor.

E N G I N E E R I N G

• Footings: All footings to be verified by structural engineer as part of scope. Drawings show footings for intent only. An Engineer’s Stamp is to be obtained when necessary to comply with permits and/or codes.

• Wind load: Exterior signs shall be designed to withstand wind pressure loading to meet or exceed all current code requirements for the state of Georgia/Henry County. Internal framework should also provide maximum capacity to avoid any surface oil canning, curvature, or deviations.

• Thermal Deformations: Design, fabricate, and install component parts to provide for expansion and contraction over a temperature range for the material of 150 degrees Fahrenheit (83.3 degrees Celsius), without buckling, oil canning, sealant joint failure, glass breakage, undue stesss on members or anchors, and other detrimental effects.

A R T W O R K

All enlarging and reducing of supplied artwork images is the responsibility of the signage fabricator. Any discrepancies after enlarging or reducing

vs. original artwork are to be addressed with Owner’s representative prior to reproduction. Refer to the design documents for reference as to what artwork will be provided. Sky Design will not submit electronic artwork for contractors use in shop drawings except for custom created logos, icons, typography, etc. Artwork for general fabrication items will not be submitted so please account for this in your time frames and general costs.

S U B M I T T A L S

Color samples, material samples, submittals, copy layouts, and working drawings are to be provided for approval by the Owner’s representative and Owner prior to manufacture. Full size copy layouts will also be required as needed.

• Shop Drawings are the responsibility of the fabricator for each of the disciplines contained within and are to include all necessary dimensions drawn to scale, details, internal mechanicals, joint connections, hidden connections, anchorage to footings, section views as needed, etc. These must be submitted as one comprehensive package to be reviewed and approved prior to beginning any construction. Scans or copies of the enclosed design documents with contractor title block will not be accepted for approval as working drawings. The sign fabricator is responsible for all aspects of fabrication including engineering, installation techniques and performance, as well as coordination with site contractors and related trades.

• Paint: 3 samples of each color to be submitted on minimum 4” x 4” plate. One will be returned; the others will be retained for file references. All paints used must retain a minimum 5-year warranty for interior and exterior signage. This includes no cracking, flaking, or fading. Exterior paints should be 2-part catalyst hardened urethane, base coat, top coat, satin finish unless otherwise specified.

• Mock-ups: samples required for review and approval will be listed on Bid Summary Form.

• Vinyl: 3 samples of each color to be submitted as a minimum 4“ x 4” submittal. All vinyl is to be 3M Scotchcal graphic vinyl, or Gerber equivalent. First surface application unless otherwise specified on drawings.

• Inkjet and/or Printed Wallcovering: 1 proof of each type of inkjet graphic to be submitted at full-size. For large format graphics, a minimum 12” x 12”, full size portion should be submitted, along with a smaller-scaled full layout of each design/image. Proofs are to be of equal or greater reproduction quality than the original artwork provided. All inkjet graphics are to be printed on 3M material or equivalent using pigment-based ink to prevent fading and discoloration. If necessary, laminates on printed vinyl are to be 3M material or equivalent. All inkjet graphics to be matte laminated, unless otherwise specified. Warranty information for all inkjet applications to be provided at no less than five years. If a matte laminate is specified for use over printed wallcovering, then a liquid laminate must be used. All submittals must be provided on the material specified, along with the laminate (if specified), for approval.

M A T E R I A L S

• All wood, stone, brick or brick veneer components to be sealed to protect against decay, mildew, and discoloration

• All aluminum components and panels to have a minimum wall thickness of .125” or greater

• The interior of all illuminated cabinets is to be painted bright white.

I N S T A L L A T I O N

• Post and Panels in concrete or pavement to be installed via core drill footing and backfill.

• All breakaway details to conform to GA DOT standard requirements.

• Exterior ADA signs containing Braille should be produced using exterior grade photopolymer.

• Pin mounted letters should be set in Hilti epoxy or equivalent to deter theft and vandalism. Exterior pin mounted letters should be set in Hilti epoxy or equivalent and sealed with silicone or equivalent waterproofing sealer.

• Signage design and installation for this project must conform to all federal, state, and city regulations and ordinances. It is the responsibility of signage fabricator to submit drawings to the proper agencies for review and approval prior to construction. It is also the responsibility of the signage fabricator to obtain the necessary permits and approvals prior to construction.

• Footings to be Georgia stamped engineered footings with backfill as needed.

• It is the responsibility of the signage fabricator to include and perform all priming work as needed for wallcovering/graphics unless specifically stated as an exclusion in the vendor bid.

• Final electrical hook-up to be completed by the vendor.

• Vendor to include painted aluminum trimcap for all lit channel letters.

S I G N A G E P R O T E C T I O N

Fabricator to coordinate protection of all signs until punch list is completed by Owner.

Fabricator to be responsible for all equipment used to install signage, including but not limited to lifts, swing stages, equipment vehicles, and temporary attachments. It is the responsibility of the fabricator to ensure that all penetrations into all concrete, precast columns, beams, or building façades do not affect the structural integrity of the reinforcement within. Should damage occur to signage and/or the building structure/façade as a result of the signage installation process, it is the continued responsibility of the fabricator to manage the resolution process with all necessary parties until an agreed-upon solution is reached and damage is repaired. sky design holds zero liability for damages incurred to owner or contractor by owner or contractor on site.

W A R R A N T Y

• Fabricator warrants work against failure due to faulty materials, workmanship, and design for a period of one years from date of substantial completion.

• Fading, cracking, oil canning, peeling, delaminating, rusting, corroding, and structural failure, including distortion, will be construed to mean failure due to faulty materials and workmanship.

• All products, materials, adhesives, paints, etc. shall be covered by standard warranty. Failures during the warranty period shall be repaired or replaced to the satisfaction of the Owner.

P R O P R I E T A R Y I N F O R M A T I O N

Sky Design shall have the right to include a credit line on completed designs or any visual representation of drawings, models, sketches, photographs, etc. created by Sky Design in the development of this signage program. The credit shall be included in any publication of the designs by the Owner or by others.

Henry County Developer Signage Project #31769.00

Project Specifications

D E S I G N I N T E N T

Project Specifications

TITLE:

Henry County Developer Signage

SIGN TYPE:

REV#: DATE: DRAWN BY:

#0.00 08.07.2025 BV/CW/TC

D E S I G N D E T A I L S

M A T E R I A L S :

A - 1/4” thick aluminum sign panel painted

(P1), bolted through face using tamper-resistent hardware into square tubing; digitally printed vinyl applied to outside face of sign panel (graphic not part of sign-vendor’s scope)

B - Decorative finial (M1) mounted to sign post top

C - 4” square sign posts, painted (P1) with breakaway connection at base

D - Square tubing (M3) painted (P1) welded to sign posts

E - 0.375 diameter rebar painted (P1) threaded through square tubing and welded in place to secure

F - Decorative 2 -part base (M2) mounted around sign base

N O T E S :

1. All locations will require additional review to determine exact orientation and placement.

2. Fabricator to field verify all dimensions and conditions prior to final production and engineering.

3. Sign(s) are (2) sided

Developer Sign - Front & Back Elevation

SCALE: 1/2" = 1 ' -0"

Developer Sign - Plan View

SCALE: 1/2" = 1 ' -0"

Developer Sign - Side Elevation

SCALE: 1/2" = 1 ' -0"

Panel - Detail

SCALE: 1 " = 1 ' -0"

4 Panel - Detail

SCALE: 1 " = 1 ' -0"

A

B B

D

C C

E

F F

12'-0"

10 1/2"

4"

16" TYP

2" TYP

2" TYP 2" TYP 2" TYP 2" TYP

18" TYP

11"

5 3/4"

25"

4"17"

5 3/4"

4'-8" 5'-8"

4 1/2"

4 1/4"

7 1/2"

4 1/4"

5 3/4"

Developer Sign - Elevations

D E S I G N I N T E N T

Developer Sign - Elevations

TITLE:

Henry County Developer Signage

SIGN TYPE:

REV#: DATE: DRAWN BY:

#0.00 08.07.2025 BV/CW/TC

Developer Sign - Section

SCALE: 1/2" = 1 ' -0"

Vertical Rebar - Section

SCALE: 3" = 1 ' -0"

Developer Signage - Section

SCALE: 1/2" = 1 ' -0"

1 Developer Signage - Section

SCALE: 1/2" = 1 ' -0"

Breakaway Base - Detail

SCALE: 3" = 1 ' -0"

Panel Attachment - Detail

SCALE: 6" = 1 ' -0"

Breakaway connection

Bolted to new poured concrete base

Tamper-resistent hardware securing graphic panel to frame

Rebar threaded through square tubing and welded into place

Developer Sign - Details

D E S I G N I N T E N T

Developer Sign - Details

TITLE:

Henry County Developer Signage

SIGN TYPE:

REV#: DATE: DRAWN BY:

#0.00 08.07.2025 BV/CW/TC

Header Graphic Panel - Detail

SCALE: 1 " = 1 ' -0"

Typical Graphic Panel - Detail

SCALE: 1 " = 1 ' -0"

Developer Sign - Front & Back Elevation

SCALE: 1/2" = 1 ' -0"

16"

29"

4'-8"

1" TYP

2" TYP

2" TYP

3'-9"

9 3/4"

9 1/2" DIA.

7 3/4"3 1/2"

2 1/2"

4 3/4"

16"

4'-8"

2" TYP

Graphic Panels

D E S I G N I N T E N T

Graphic Panels - Details