Description of Supplies - W.P. Franklin Bulkhead Seals.pdf

PDF 47 KB Posted

Attached to
W. P. Franklin Bulkhead Seals Federal contract opportunity
Solicitation number
W912EP26X1ARU
Issued by
Department of the Army Corps of Engineers Engineering District Jacksonville

About this file

Written by GovTribe AI ·

This document is a detailed procurement specification for WP Franklin Bulkhead Seals, outlining the procurement of Gate Seal Assembly Sets with specific technical requirements. The procurement involves 10 Gate Seal Assembly Sets composed of multiple rubber seal components made from Motion natural rubber compound SU13366, including 20 side seal strips (1-3/4" diameter, 4'6" long), 10 bottom seal strips (40ft+ length, hot factory vulcanized), and 10 gasket strips (1/8" thick x 4" wide x 50ft long). The seals are specified with precise material characteristics including durometer (60-70), tensile strength (3000 PSI), elongation (450% minimum), compression set (30%), and water absorption (5%), with additional requirements for accelerated aging and low-temperature performance.

View the file

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DESCRIPTION OF SUPPLIES TO BE PROCURED

WP Franklin Bulkhead Seals

Description of items to be procured: Gate Seal Assembly Set

a. General Description: Motion natural rubber compound SU13366, molded profile, bulkhead Dam gate seal

WP Franklin Bulkhead Seals Purchase

b. Characteristics of these items: Durometer (60-70)/ Tensile Strength (3000 PSI)/ Elongation (450% min)/ 300% Modulus (900 PSI)/ Compression Set (30%)/ Water Absoption (5%)/ Tensile Strength, After Accelerated Aging (80% of min tensile requirement)/ Low Temperature Brittleness (All Pass w/ no cracks)

General Description QTY Dimensions

(2) EA. Side Seal Strips; 1-3/4" DIA Bulb x 9/16" THK TAIL X 4" OAW J-

TYPE MOLDED PROFILE 4FT6"

20-pieces

(1) EA. BOTTOM SEAL STRIP; 1-

3/4" DIA BULB X 9/16" THK TAIL X

4" OAW J-TYPE MOLDED PROFILE,

HOT FACTORY VULCANIZE

SPLICED TO SIZE (40FT+) 10

pieces

(1) EA. GASKET STRIP; 1/8" THK X

4" WIDE X 50FT LONG 10-

pieces

10 setsGate Seal Assembly Sets

Total 11

Shipping

File details come from the government source that posted it. Updated .