Delivery to Trout Run and required oversize load permits.docx
DOCX document 16 KB Posted
- Attached to
- PennDOT Storage Sheds
- Solicitation number
- 6100054208
- Issued by
- Lycoming County, Lower Burrell City, Pennsylvania
About this file
This document appears to be a specifications sheet for the delivery of two 12x16 foot storage sheds to the Trout Run stockpile location at 1088 Route 14 HWY, Trout Run, PA 17771. The sheds are required to have 8-foot-high walls, almond colored vinyl siding with brown trim, a 6/12 pitch roof with 12-inch gable overhangs, a 36-inch 9-light entry door, a 9x7 overhead garage door with glass on the gable end, an aluminum sill plate for the overhead door, a 9-foot ramp for the overhead door, and four 2-foot x 12-foot shelves in the rear of the shed. The floor will be constructed from 3/4 inch pressure treated plywood. The document also specifies that the successful bidder must obtain the required oversize load permits for delivery.
The document does not provide any information about pricing terms, set asides, incumbents, funding requirements or sources, award dates, or contract term and renewal options.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Addendum #1.docx | DOCX document | |
| 10x14 shed.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
2 ea. 12X16 foot storage sheds for Trout Run stockpile
· Delivery to Trout Run and required oversize load permits (1088 Route 14 HWY Trout Run PA 17771)
· 12 x 16 foot shed(s)
· 8-foot-high wall
· Almond colored vinyl siding on exterior with brown trim
· 6 / 12 pitch roof with 12-inch gable overhangs
· 1-36 inch 9 light entry door, (outswing door ) on building side. (Side to be determined at order)
· 1- 9x7 overhead garage door with glass on gable end
· Aluminum sill plate for overhead door
· 9-foot ramp for overhead door
· 4 ea. 2-foot x 12-foot shelf in rear of shed
· Floor will be constructed from ¾ inch pressure treated plywood
· P.E stamped engineered plans (Plans will include the structure and the anchorage as required by PA Labor and Industry regulations)
File details come from the government source that posted it. Updated .