D-19.doc
DOC document 391 KB Posted
- Attached to
- Security Bag Products Federal contract opportunity
- Solicitation number
- DEA-08-SA-0183
About this file
Specification 2
View the file
Other files for this federal contract opportunity
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Product Specifications
· Tamper Evident Closure.
· 2” wide Plain, Unprinted PET Header is used with 1-1/2” wide strip of A-804 Red Adhesive, and 2” BOPP Release Liner.
· 3/8” wide (or as specified on the work order) A-804 Adhesive is applied to the Release Liner, and 1-1/2” A-804 Red Adhesive applied to the Header Material. The top section of the bottom side of the envelope is “sandwiched” between the two strips of Red Adhesive (See Figure 1).
· Envelope uses a 7/16” wide Pouch Weld construction and is printed using water based inks. Ink White Matte , Black Gloss
· Film- Co-extruded (Spec E403)
· Bag - Clear Pouchweld Envelope 20 “ Wide x 30.5” Length Gauge (5 Mil), Packed 100 case
· Label - 6” x 9” 3.5 Mil Paper Face Sheet, Chemical resistant ink, 1.2 mils Hi Tac Permanent Adhesive. Unique no duplicate sequential number.
Figure 1
| Film Thickness |
| Thickness of Release Liner, Header, and Adhesive |
| Minimum |
| Target |
| Maximum |
| 3.0 mils and less |
| 0.008” |
| 0.010” |
| 0.012” |
| 3.25 mils to 5.0 mils |
| 0.010” |
| 0.012” |
| 0.014” |
| Over 5.0 mils |
| 0.012” |
| 0.014” |
| 0.016” |
Inset “A”
(Top View)
Unprinted Header Material
2” BOPP Release Liner
1-1/2” A-804 Red Glue – Applied to Header Material
3/8” Red Glue – Applied to Release Liner
Measurement Area
File details come from the government source that posted it. Updated .