Data Requirements SPMYM326Q4030.pdf
PDF 116 KB Posted
- Attached to
- Nut SLFL
- Solicitation number
- SPMYM326Q4030
About this file
This is a Contract Data Requirements List (DD Form 1423) for hexagonal nuts specifying two mandatory data submissions from the contractor.
The first requirement (Sequence A001) is a Certificate of Compliance documenting quality compliance per DID DI-MISC-81356A, referenced in contract paragraph C.4.1. This one-time submission must accompany the material delivery and be submitted under a separate shipment number. The second requirement (Sequence A002) is a Material Certification for chemical and mechanical properties per DID DI-MISC-80678, also referenced in contract paragraph C.4.2. This certification must contain actual quantitative test results in the units specified by the specification, with evidence of testing the correct number of fastener specimens. New untested fasteners are required for wedge tensile and yield strength testing. Both data items require submission with material, distribution to office 133.2, processing through Technical Office 245, and referencing clauses 252.232-7006, 252.232-7003, or 52.232-36 for payment and submission procedures. DD Form 250 documentation is required for both submissions. The document was prepared by S. Sweeney, Heather on August 11, 2023, and applies the marking and certification requirements for controlled industrial materials outlined in the contract.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Combined Synopsis Solicitation Nut SLFL SPMYM326Q4030.docx | DOCX document | |
| RFQ-SPMYM326Q4030 Nut Self Locking 60122640.docx | DOCX document | |
| Attachment 1 - Specifications SPMYM326Q4030.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
5310 2RD EXHIBIT
SYSTEM/ITEM NUT, HEX
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 08/11/2023
CONTRACT DATA REQUIREMENTS LIST
01 SEQ NO A002
02 DATA DESC MATERIAL CERTIFICATION
03 SUBTITLE CHEMICAL & MECHANICAL CERTIFICATION
04 DID NUMBER DI-MISC-80678
05 CONTRACT REF PARA C.4.2
06 TECH OFFICE 245
07 DD 250 REQ DD
08 APP CODE NA
10 FREQUENCY 1-TIME
11 AS OF DATE
12 DATE 1ST SUBM WITH MATERIAL
13 DATE SUB SUBM N/A
14 DISTRIBUTION 133.2
15 TOTAL 2
16 REMARKS 1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & Mechanical Test required by the Specification
4.The Test results shall be quantitative & in the units required by the specification.
5.For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-
36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6.Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7.In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
SEQ. NO. A002
PREPARED BY
APPROVED BY
DATE
DATE
DD FORM 1423
09 IAC INPUT
/1
5310 2RD EXHIBIT
SYSTEM/ITEM NUT, HEX
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 08/11/2023
CONTRACT DATA REQUIREMENTS LIST
01 SEQ NO A001
02 DATA DESC CERTIFICATE OF COMPLIANCE
03 SUBTITLE CERTIFICATION OF QUALITY COMPLIANCE
04 DID NUMBER DI-MISC-81356A
05 CONTRACT REF PARA. C.4.1
06 TECH OFFICE 245
07 DD 250 REQ DD
08 APP CODE
10 FREQUENCY 1-TIME
11 AS OF DATE
12 DATE 1ST SUBM WITH MATERIAL
13 DATE SUB SUBM N/A
14 DISTRIBUTION 133.2
15 TOTAL 2
16 REMARKS 1. TECHNICAL CONTENT AS DESCRIBED IN THE RESPECTIVE CONTRACT LINE ITEM(S).
2. FOR PAYMENT & SUBMISSION OF DATA REFER TO CLAUSE 252.232-7006 &
252.232.7003 OR 52.232-36. EACH DATA ITEM SUBMITTED BY VENDOR MUST BE
SUBMITTED UNDER A SEPARATE SHIPMENT NUMBER.
SEQ. NO. A001
PREPARED BY
APPROVED BY
DATE
DATE
DD FORM 1423
09 IAC INPUT
/1
| CONTRACT: | |
| PAGE: | |
| CONTRACT_2: | |
| PAGE_2: | |
| Date1_af_date: 8/11/23 | |
| Date2_af_date: | |
| 2023-08-11T08:18:37-0400 | |
| SWEENEY.HEATHER.S.1455804520 |
| 2023-08-11T08:18:49-0400 | |
| SWEENEY.HEATHER.S.1455804520 |
| Date7_af_date: 8/11/23 |
| Date8_af_date: |
File details come from the government source that posted it. Updated .