DARPA-SN-27-18.pdf
PDF 80 KB Posted
- Attached to
- Laguna Industry Day
- Solicitation number
- DARPA-SN-27-18
About this file
This is a Special Notice announcing an Industry Day for the DARPA Laguna program under the Biological Technologies Office.
The Laguna program is a 36-month effort sponsored by the Defense Advanced Research Projects Agency (DARPA) focused on developing integrated manufacturing approaches to convert domestic feedstocks into application-ready specialty chemical formulations for defense applications. Target areas include advanced protective and functional coatings for aircraft, ground vehicles, maritime systems, and infrastructure; composite resins and adhesives for lightweight structural assemblies; high-performance polymeric materials; and non-fluorinated replacements for fluorinated polymers. Domestic feedstocks include biological and petrochemical bulk products such as sugars, ethylene, and BTX (benzene, toluene, and xylenes). The program will pursue its objectives through two Technical Areas: TA1 – Make & Formulate, where performers will develop fully formulated defense-relevant specialty products from U.S.-produced raw materials evaluated through technoeconomic analysis, life cycle assessment, and commercialization strategy; and TA2 – Model, where government partners, FFRDCs, National Labs, and university affiliated research centers will develop predictive models to optimize relationships among feedstocks, synthesis, formulation, processing, cost, and final product properties.
The virtual Industry Day is scheduled for December 9, 2026, at 1:00 p.m. Eastern Time with a registration deadline of December 2, 2026, at 4:00 p.m. Eastern Time. Registration is limited by virtual platform capacity and is restricted to U.S. citizens only who are registered potential proposers. The event will include technical briefings by DARPA program personnel, opportunities for attendees to ask questions, and information about the DARPA solicitation process. A draft program solicitation is anticipated prior to the Industry Day and will be posted on sam.gov. All questions and answers will be provided to attendees, and portions of the event will be recorded and posted on the DARPA website. Technical inquiries should be directed to Dr. William Mounfield at Laguna@darpa.mil.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DARPA-SN-27-18
Industry Day
Special Notice DARPA-SN-27-18
Laguna
Defense Advanced Research Projects Agency (DARPA)
Biological Technologies Office (BTO)
Posting Date: November 12, 2026 Event Date: December 9, 2026, at 1:00 p.m. Eastern Time (ET) Registration Deadline: December 2, 2026, at 4:00 p.m. Eastern Time (ET) Registration Website: https://creative.spa.com/darpa/bto/laguna/industryday Technical POC: Dr. William Mounfield, BTO Program Manager E-mail: Laguna@darpa.mil
INDUSTRY DAY DESCRIPTION:
The Defense Advanced Research Projects Agency (DARPA) will host a virtual Industry Day in support of the DARPA Program Solicitation (PS) for Laguna on December 9, 2026. DARPA anticipates releasing a draft of the program solicitation prior to Industry Day. When released, the solicitation will be made available at https://sam.gov/.
The goals of the Industry Day are:
1. To introduce the science and technology community (industry, academia, and government) to the Laguna program vision and goals;
2. To facilitate interaction between researchers with capabilities and interests relevant to the Laguna program goals; and
3. To collect questions during the event that DARPA may answer and make available in a Frequently Asked Questions (FAQ) document
The Industry Day will include overview presentations by the program manager and government personnel to inform about potential areas of interest for future research opportunities. It is anticipated that Industry Day materials will be posted online to https://www.darpa.mil/research/programs/laguna.
PROGRAM OBJECTIVE AND DESCRIPTION:
The Department of War (DoW) depends on specialty chemical products to sustain the performance, maintainability, and readiness of defense systems. Many of the fine chemical intermediates and formulated specialty chemical products required for these applications depend on vulnerable foreign supply chains. The goal of the Laguna program is to develop and demonstrate integrated manufacturing approaches that directly convert abundant domestic feedstocks into application-ready specialty chemical formulations, while minimizing intermediate separations, processing steps, or downstream reformulation. Target areas include advanced protective and functional coatings for aircraft, ground vehicles, maritime systems, and infrastructure; composite resins and adhesives for lightweight structural assemblies, repair, and https://creative.spa.com/darpa/bto/laguna/industryday mailto:Laguna@darpa.mil https://www.darpa.mil/research/programs/laguna bonding applications; high-performance polymeric materials and molded structural components;
and non-fluorinated replacements for fluorinated polymers used in chemically resistant, thermally stable, low-friction, barrier, dielectric, and water- or oil-repellent applications. Resulting products must meet or exceed the critical performance requirements of incumbent military materials while providing economically viable domestic alternatives to import-dependent supply chains. Domestic feedstocks include biological and petrochemical bulk products, such as, sugars, ethylene, BTX (benzene, toluene, and xylenes), and other suitable inputs produced entirely in the U.S. Laguna seeks to bypass conventional, multistep fine-chemical supply chains by integrating synthesis, processing, formulation, and validation into manufacturing approaches that deliver application-ready products with reduced waste and minimal—or no—intermediate chemical isolation and purification. The program will pursue its objective through two Technical Areas (TAs). Laguna is anticipated to be a 36-month effort.
Under TA1 – Make & Formulate, performers will develop and demonstrate fully formulated, defense-relevant specialty products from U.S.-produced raw materials. Approaches will be evaluated through comprehensive technoeconomic analysis, life cycle assessment, and commercialization strategy plans.
Under TA2 – Model, Government partners, federally funded research and development centers (FFRDCs), National Labs, and university affiliated research centers will develop models to predict and optimize relationships among feedstocks, synthesis, formulation, processing, cost, and final product properties and performance. Government TA2 teams will work with TA1 teams to develop tools to accurately predict material properties across a range of DoW relevant use cases.
INDUSTRY DAY AGENDA:
The Industry Day meeting will be hosted in a virtual format using Zoom. The Industry Day meeting will start with presentations by DARPA that include a program technical briefing to further describe the planned solicitation objectives and content. Attendees will have the opportunity to ask questions; all questions and answers will be provided to all attendees. Additionally, the attendees will have the opportunity to learn about the DARPA solicitation process. This meeting will be held at the UNCLASSIFIED level.
Portions of the Industry Day are expected to be recorded and made available online on the DARPA website following the conclusion of the event.
REGISTRATION INFORMATION:
Virtual registration is limited by the virtual platform capacity; early registration is strongly recommended. Registrations will be cut off at the registration deadline listed above or once attendance capacity is met, whichever comes first. Any change to the registration deadline will be captured via an amendment to this notice and an update to the registration website. Virtual Industry Day registrants will be provided a link and instructions to access the event after their registration has been approved. The Industry Day is open only to registered potential proposers. The event is closed to the general public and media. An online registration form, preliminary agenda, and meeting details for the Industry Day can be found at the registration website. Only US citizens may attend – you will be prompted to provide relevant credentials during the registration.
DARPACONNECT: Entities who have not worked with DARPA before are encouraged to learn more about DARPAConnect, an initiative established to facilitate collaboration between DARPA and potential performers. The DARPAConnect team offers customized support, resources, and guidance on how to prepare ideas for high-impact conversations with DARPA program managers.
Please visit DARPAConnect.us to access a digital hub of online resources, including a curriculum for self-paced learning, personalized support, and in-person and virtual events. To prepare for the Industry Day, attendees can leverage the learning module on “Making the Most of a DARPA Proposers Day.” In addition to the self-paced online materials, the DARPAConnect team is able to schedule one-on-one conversations to discuss specific ideas, questions, and paths to DARPA.
Use the contact form at DARPAConnect.us or email the DARPAConnect team directly at darpaconnect@darpa.mil to request assistance.
ADMINISTRATIVE:
All administrative and technical questions should be directed to Laguna@darpa.mil. Please refer to the Special Notice number (DARPA-SN-27-18) in all correspondence. This Special Notice is issued solely for information and program planning purposes and does not constitute a formal solicitation for proposals or proposal abstracts; any so sent will be disregarded. In accordance with FAR 15.201(e), responses to this Special Notice are not offers and cannot be accepted by the Government to form a binding contract. Attendance is strictly voluntary and is not required to propose to subsequent Announcements (if any) or Solicitations (if any) on this topic. DARPA will not provide reimbursement for costs incurred in responding to this Special Notice. Respondents are advised that DARPA is under no obligation to acknowledge receipt of any information received or provide feedback to respondents with respect to any information submitted under this Special Notice.
NO CLASSIFIED INFORMATION SHOULD BE INCLUDED IN THE SN RESPONSE.
File details come from the government source that posted it. Updated .