DARPA-BAA-16-22_Attachment_5_Proposal_Template_-_Statement_of_Work-_Amendment_1.pdf

DARPA-BAA-16-22 Improv BAA

Attachment 5

Statement of Work (SOW)

Amendment 1

All pages shall be formatted for printing on 8-1/2 by 11 inch paper with 1-inch margins and font size not smaller than 11 point. Font sizes of 8 or 10 point may be used for figures, tables, and charts.

The Statement of Work must be in .pdf, .odx, .doc, or .docx formats. Submissions must be written in English.

No page limit has been specified for the Statement of Work.

The SOW must address three independent and sequential project phases:

Feasibility Study (Phase 1); Prototype Construction (Phase 2); and Prototype Evaluation (Phase 3). For each phase, provide a detailed task breakdown as outlined in the template below. The SOW task structure must be consistent with the schedule, deliverables and costs.

If applicable, add classification markings as described in Section 4.5.3 of the Improv BAA, DARPA-BAA-16-22.

Source Selection Information – See FAR 2.101 and 3.104

DARPA-BAA-16-22 1

<PRIME ORGANIZATION LOGO>

DARPA-BAA-16-22

Statement of Work (SOW)

Proposal Title Proposer Organization

Type of Organization

Choose one: Large Business, Small Disadvantaged Business, Other Small Business, HBCU, MI, Other Educational, or Other Nonprofit

Proposer Reference Number, if any

Technical Point of Contact (POC)

Name:

Address:

Telephone:

Email:

Administrative POC

Name:

Address:

Telephone:

Email:

Security POC

Name:

Address:

Telephone:

Email:

Identifying number of associated abstract DARPA-16-22-Improv-PA-___

Other Team Members (subcontractors and consultants), if any

Technical POC Name:

Organization:

Organization Type:

Date Proposal was prepared Proposal Validity Period (minimum 270 days)

DARPA-BAA-16-22 2

Table of Contents

Phase 1: Feasibility Study

Phase 2: Prototype Construction

Phase 3: Prototype Evaluation

DARPA-BAA-16-22 3

1. Phase 1: Feasibility Study Deliverable – Feasibility Study Report emailed to Improv@darpa.mil Delivery Date – 30 Days from issuance of Phase 1 Purchase Order.

Proposer acknowledges that the estimated start date for Phase 1 is May 31 August 1, 2016 and the period of performance is 30 days: Yes No [For each defined task/subtask, provide:

• A general description of the objective.

• A detailed description of the approach to be taken to accomplish the task/subtask.

• Identification (by name) of the primary organization (prime contractor, subcontractor, and/or consultant) responsible for execution of each defined task/subtask.]

2. Phase 2: Prototype Construction Deliverable – Prototype Construction Report emailed to Improv@darpa.mil.

Delivery Date – 75 Days from issuance of Phase 2 Purchase Order.

Proposer acknowledges that the estimated start date for Phase 2 is August 10 September 14, 2016 and the period of performance is 75 days: Yes No [For each defined task/subtask, provide:

• A general description of the objective.

• A detailed description of the approach to be taken to accomplish the task/subtask.

• Identification (by name) of the primary organization (prime contractor, subcontractor, and/or consultant) responsible for execution of each defined task/subtask.]

3. Phase 3: Prototype Evaluation Deliverable – Prototype Evaluation Lessons Learned Report emailed to Improv@darpa.mil.

Delivery Date – 30 Days from issuance of Phase 3 Purchase Order.

Proposer acknowledges that the estimated start date for Phase 3 depends upon the availability of test facilities, but in no case will it occur before the conclusion of the Phase 2 period of performance: Yes No

[Provide:

• Identification (by name) of the primary organization (prime contractor, subcontractor, and/or consultant) responsible for execution of each defined task/subtask.

• Identification (by name) of the personnel attending and supporting the evaluation.

• Suggested test conditions and procedures.

• Suggested Government test facilities, if known.] mailto:Improv@darpa.mil mailto:Improv@darpa.mil mailto:Improv@darpa.mil