Generator model.jpeg

This image displays a generator set data plate from a Generac Power Systems, Inc. stationary diesel generator manufactured in Waukesha, Wisconsin. The unit is a MD0600-K36220D18GPSY model with serial number 12151690100 and engine number 0G9353, rated at 600 kilowatts and 750 kilovolt-amperes with a power factor of 0.8. The generator operates at 277/480 volts, three-phase, 60 hertz with a current capacity of 902.1 amps and includes a 1000-amp breaker. The engine runs at 1800 RPM with a 665.0 kilowatt breakage rating, and the unit has a production date of September 8, 2010.

The data plate includes critical compliance information indicating the genset is factory-registered under the South Coast Air Quality Management District (SCAQMD) certified equipment permit program for stationary compression ignition emergency generating sets with less than 200 operating hours annually. The label notes that prior to operation, local air quality authorities must be contacted for additional requirements, and this information does not constitute a permit to construct or operate. Additionally, the unit has been evaluated for use in modular parallel systems (MPS) with a maximum capacity of 15 generator units that may be interconnected in a single system, and it carries UL listing for stationary engine generator assembly use.