D1-M0068123Q0002.pdf

SEE ADDENDUM

(No Collect Calls)

M0068123Q0002 07-Dec-2022

b. TELEPHONE NUMBER

760-725-3210

8. OFFER DUE DATE/LOCAL TIME

12:00 PM 04 Jan 2023

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

M006819. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

CHASE A. FULLERTON

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

M342083214581

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

REGIONAL CONTRACTING OFFICE-MCIWEST

BLDG 22180 REGIONAL CONTRACTS

CAMP PENDLETON CA 92055-5027

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE M34208 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

M34208

STEVEN POSY

DEPOT REPRODUCTION

1600 IWO JIMA AVE BLDG 1 RM 138

SAN DIEGO CA 92140

TEL: FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$11,000,000

NAICS:

811310

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF51

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

M0068123Q0002

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 12 Months Maintenance and Trouble-Shooting Support

FFP

Base Year maintenance, parts and over the phone support, for Finishing Systems in accordance with Statement of Work. POP: 1/20/23- 1/19/24 FOB: Destination

MILSTRIP: M342083214581

PURCHASE REQUEST NUMBER: M342083214581

PSC CD: J075

NET AMT

Over and Above

FFP

Base Year unscheduled emergency repairs and supplies not covered under SOW.

POP: 1/20/23- 1/19/24

1001 12 Months OPTION Maintenance and Trouble-Shooting Support

FFP

Option Year One maintenance, parts and over the phone support, for Finishing Systems in accordance with Statement of Work. POP: 1/20/24-1/19/25 FOB: Destination

Over and Above

FFP

Option Year One unscheduled emergency repairs and supplies not covered under

SOW. POP: 1/20/24-1/19/25

2001 12 Months OPTION Maintenance and Trouble-Shooting Support

FFP

Option Year Two maintenance, parts and over the phone support, for Finishing Systems in accordance with Statement of Work. POP: 1/20/25-1/19/26

Over and Above

FFP

Option Year Two unscheduled emergency repairs and supplies not covered under

SOW. POP: 1/20/25-1/19/26

STATEMENT OF WORK

Background

The Communication Strategy and Operations, Reproduction department at Marine Corps Recruit Depot San Diego and Western Recruiting Region has the mission of providing printing and reproduction capabilities for the recruitment and training of all Marine Corps Recruits, Drill Instructors, and Recruiters to include the Support and Training Commands aboard the Depot. MCRD San Diego trains approximately 17,500 recruits and conducts approximately 40 graduation ceremonies per year, and the MCRD Communication Strategy and Operations, Reproduction Section, has a requirement to produce approximately 1000 color Graduation programs per graduation week (40,000 annually). Additionally, MCRD San Diego COMMSTRAT is required to produce colored printed programs, pamphlets and training materials for Retirement Ceremonies, Change of Command Ceremonies, hosted events and other command-related functions and trainings. The MCRD San Diego COMMSTRAT office’s finishing systemis in need of a newservice and maintenance contract. The need to purchase a finishing system service and maintenance contract is a mission critical necessity, and an in imperative order for the COMMSTRAT reproduction department at MCRD San Diego to support the weekly printing requirements of the MCRDSD/WRR command.

The acquisition of the finishing system service and maintenance contract requires the inclusion a service and maintenance plan, which ensures the mission if the Communication Strategy and Operations office, in support of the command and local entities is not hindered due to break-downs. Continuous preventative maintenance will service equipment by maintaining serviceability and providing supplies. Having on-call repairs and support will provide the COMMSTRAT office capabilities to support ongoing mission requirements and meet expected project deadlines.

Scope

The acquisition of the finishing system service and maintenance contract will include the support, travel, parts, and labor service for (3) finishing systems located in the Combat Camera Division, G-3, reprographics department.

Systems consists of (1)Horizon Model Vac-100a, Callorator SN: 405060), Stitcher and folder (model: SPF-20, SN:

441008), and trimmer (model: FC-20, SN:374008). (1)Mbm /Triumph Model 5551-Ep Paper Cutter, Sn: 6112884.

(1) Challenge Model Ms5 Five Spindle Drill Model Cmc-401ce, Sn: 146070.

Further services will include immediate repair and an on-going maintenance service contract that will provide supplies and on-the-spot service, supporting primary maintenance and depo-level repairs. Technicians must be in contact within a 2hr maintenance call and report within a 4hr period. The systems will require primary and secondary maintenance semi-annually, parts, labor, and, travel expenses will be included in the contract. All identified systems are separate in nature and do not depend upon or are connected to a dependent system.

The material or service must be compatible in all aspects (form, fit, and function) with existing systems presently installed.

Tasks 1.Delivery: Contractor must deliver:All equipment and components shall be delivered to the Communications

Strategy and Operations office, located at 1600 Iwo Jima Ave, Building 1, Marine Corps Recruit Depot San Diego, 92140; and installed by the authorized vendor as prescribed on the contract.

2.Maintenance/Service Calls:Equipment maintenance/service shall be performed by the authorized vendor during the term of the contract. Vendor must include mileage as part of this agreement. Government will not pay separate mileage costs on service calls.

3.Maintenance/Service Requirements:Telephone response times are not to exceed two (2) working hours after notification. On site response times are not to exceed four (4) working hours after notifications, if problem resolution is not successful via telephone support. All maintenance services will be provide at the Communication Strategy and Operations/Reproduction department located at Marine Corps Recruit Depot San Diego Bldg 1, San Diego, CA. 92140.

Government-Furnished Property, Material, Equipment, or Information (GFP, GFM, GFE, or GFI) Any and all services provided will be recorded. Technician must provide a written explanation of the services provided, condition of all components upon delivery and after installation, verification of functionality and operability, and declaration that the machine and all parts, components software have been successfully delivered, properly installed and found to be fully operable. The COMMSTRAT Director will sign the paperwork, certifying the information.

Security

1. Identification: Vendor must a current valid driver’s license along with (1) other form of ID.

2. Release of Information: All government data provided to the contractor by the government will be protected from public disclosure in accordance with the markings contained thereon. All other information related to the services and items to be delivered may not be disclosed, by any means under this contract, without prior approval from the Contracting Officer and Director of the Communication Strategy and Operations office. Dissemination of public disclosure includes but is not limited to: permitting access of such information by foreign national or by any other person or entity, publication of technical or scientific papers, advertising, or any proposed public release. The contractor shall provide adequate physical protection of such information so as to preclude access by any person or entity not authorized to access it.

Over & Above Work The Contractor shall provide all items necessary such as labor, transportation, equipment, tools, supervision, management, quality control, testing equipment, materials, and parts required to perform over and above work repair, modification or replacement of equipment, parts, etc. in a timely manner. The Contractor shall substantiate the need for over and above work by describing the conditions that warrant the repair and why minor repair measures accomplished as part of regular maintenance will not suffice. The Contractor shall report the need for over and above work repairs to the Technical Point of Contact (TPOC).

General Requirements and Procedures for Over and Above work. As described in DFARS Clause 252.217-7028, Over and Above Work authorizes the Contractor to perform repairs on identified equipment that is outside of the standard inspection requirements to insure equipment is sustained in good working order in accordance with manufacturer’s instructions.

Authority to Perform Over and Above Work. The Contracting Officer is the only person(s) with authority to authorize the Contractor to proceed with the work in accordance with the over and above work portion of the contract and work will be negotiated and approved in advance for each work request. All work requests will be ordered and approved in writing. The Government may elect not to make repairs but instead replace items.

Replacement items may be acquired either from the Contractor or from any other source determined to be advantageous to the Government.

Estimate, Preparation and Evaluation

a. The preparation of estimates is included in the price of the firm fixed-price portion of the contract.

b. Following equipment inspection, or if requested by the TPOC, the Contractor shall provide a written work estimate that will include the following minimum information:

(1) Contractor name and address.

(2) Contract number

(3) Date inspection was performed/call placed.

(4) Itemized list of parts required to perform repair, including quantity and price for each item.

(5) Estimated number of labor hours required to complete repair.

(6) Number of hours charged for travel if the repair is not part of the scheduled maintenance inspection.

c. Materials and Parts.

(1) Material price and parts shall be the lowest price available considering the availability of materials and the time constraints of the job. It shall include any discounts and/or rebates received by the Contractor. Parts shall be provided to the Government at the Contractor’s cost without mark up.

(2) The Contractor shall provide quotations from three suppliers of the required materials exceeding $2,500.00 per parts/material.

d. Estimate Evaluation. The Contractor’s estimate will be evaluated to determine if:

(1) The scope has been clearly and accurately identified.

(2) The number of labor hours has been accurately estimated.

(3) The cost of materials and parts are reasonable and properly documented. The material and parts shall include a detailed estimate of materials including such items as the name of the part, manufacturer of the part, the part number, the size, quality, quantity (number of units) and the unit prices.

(4) The estimated lead-time for the delivery of the part to the Contractor is included.

(5) The Contractor shall state the actual time it will take to perform the work from commencement to completion.

(6) The detailed estimate will be used to negotiate over and above work repairs and award of a firm fixed price modification to the contract. The Contractor shall not assume that a modification will be issued, and shall not order materials or proceed with any work until receipt of the modification.

Place of Performance Marine Corps Recruit Depot San Diego, Communication Strategy and Operations, 1600 Iwo Jima Ave., Bldg 1, San Diego, CA 92140

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 N/A N/A N/A N/A 1001 Destination Government Destination Government 1002 N/A N/A N/A N/A 2001 Destination Government Destination Government 2002 N/A N/A N/A N/A

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 20-JAN-2023 TO

19-JAN-2024

N/A M34208

STEVEN POSY

DEPOT REPRODUCTION

1600 IWO JIMA AVE BLDG 1 RM 138

SAN DIEGO CA 92140

M34208

0002 N/A N/A N/A N/A

1001 POP 20-JAN-2024 TO

19-JAN-2025

N/A M34208

STEVEN POSY

DEPOT REPRODUCTION

1600 IWO JIMA AVE BLDG 1 RM 138

SAN DIEGO CA 92140

1002 N/A N/A N/A N/A

2001 POP 20-JAN-2025 TO

19-JAN-2026

N/A M34208

STEVEN POSY

DEPOT REPRODUCTION

1600 IWO JIMA AVE BLDG 1 RM 138

SAN DIEGO CA 92140

2002 N/A N/A N/A N/A

WAGE DETERMINATION

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5635 Daniel W. Simms Division of | Revision No.: 20 Director Wage Determinations| Date Of Last Revision: 07/26/2022

Note: Contracts subject to the Service Contract Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

|If the contract is entered into on or |With certain exceptions Executive Order | |after January 30 2022 or the |14026 applies to the contract. | |contract is renewed or extended (e.g. |The contractor must pay all covered workers | |an option is exercised) on or after |at least $15.00 per hour (or the applicable | |January 30 2022: |wage rate listed on this wage determination| | |if it is higher) for all hours spent | | |performing on the contract in 2022. | |If the contract was awarded on or |With certain exceptions Executive Order | |between January 1 2015 and January 29|13658 applies to the contract. | |2022 and the contract is not renewed |The contractor must pay all covered workers | |or extended on or after January 30 |at least $11.25 per hour (or the applicable | |2022: |wage rate listed on this wage determination| | |if it is higher) for all hours spent | | |performing on the contract in 2022. |

The applicable Executive Order minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the Executive Orders is available at https://www.dol.gov/agencies/whd/government-contracts.

State: California

Area: California County of San Diego

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 18.27 01012 - Accounting Clerk II 20.51 01013 - Accounting Clerk III 22.94 01020 - Administrative Assistant 35.24 01035 - Court Reporter 30.88 01041 - Customer Service Representative I 15.46 01042 - Customer Service Representative II 16.88 01043 - Customer Service Representative III 18.94 01051 - Data Entry Operator I 16.16 01052 - Data Entry Operator II 17.63 01060 - Dispatcher Motor Vehicle 22.14 01070 - Document Preparation Clerk 18.35 01090 - Duplicating Machine Operator 18.35 01111 - General Clerk I 15.15 01112 - General Clerk II 16.54 01113 - General Clerk III 18.57 01120 - Housing Referral Assistant 22.49 01141 - Messenger Courier 17.59 01191 - Order Clerk I 17.13 01192 - Order Clerk II 18.68 01261 - Personnel Assistant (Employment) I 18.32 01262 - Personnel Assistant (Employment) II 20.67 01263 - Personnel Assistant (Employment) III 23.10 01270 - Production Control Clerk 26.00 01290 - Rental Clerk 16.62 01300 - Scheduler Maintenance 18.04 01311 - Secretary I 18.04 01312 - Secretary II 20.18 01313 - Secretary III 22.49 01320 - Service Order Dispatcher 19.78 01410 - Supply Technician 35.24 01420 - Survey Worker 19.16 01460 - Switchboard Operator/Receptionist 17.35 01531 - Travel Clerk I 18.86 01532 - Travel Clerk II 20.59 01533 - Travel Clerk III 22.61 01611 - Word Processor I 17.84 01612 - Word Processor II 20.02 01613 - Word Processor III 22.40 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 26.03 05010 - Automotive Electrician 24.61 05040 - Automotive Glass Installer 23.71 05070 - Automotive Worker 23.71 05110 - Mobile Equipment Servicer 21.81 05130 - Motor Equipment Metal Mechanic 25.73 05160 - Motor Equipment Metal Worker 23.71 05190 - Motor Vehicle Mechanic 25.73 05220 - Motor Vehicle Mechanic Helper 20.46

05250 - Motor Vehicle Upholstery Worker 22.83 05280 - Motor Vehicle Wrecker 23.71 05310 - Painter Automotive 25.07 05340 - Radiator Repair Specialist 23.71 05370 - Tire Repairer 17.39 05400 - Transmission Repair Specialist 25.73 07000 - Food Preparation And Service Occupations 07010 - Baker 16.47 07041 - Cook I 18.14 07042 - Cook II 20.63 07070 - Dishwasher 14.32*** 07130 - Food Service Worker 15.92 07210 - Meat Cutter 17.28 07260 - Waiter/Waitress 14.46*** 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 22.92 09040 - Furniture Handler 15.11 09080 - Furniture Refinisher 21.93 09090 - Furniture Refinisher Helper 17.69 09110 - Furniture Repairer Minor 20.29 09130 - Upholsterer 21.93 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 14.50*** 11060 - Elevator Operator 16.52 11090 - Gardener 21.14 11122 - Housekeeping Aide 16.52 11150 - Janitor 16.52 11210 - Laborer Grounds Maintenance 16.82 11240 - Maid or Houseman 14.86*** 11260 - Pruner 15.32 11270 - Tractor Operator 19.69 11330 - Trail Maintenance Worker 16.82 11360 - Window Cleaner 18.13 12000 - Health Occupations 12010 - Ambulance Driver 18.34 12011 - Breath Alcohol Technician 26.93 12012 - Certified Occupational Therapist Assistant 38.12 12015 - Certified Physical Therapist Assistant 36.98 12020 - Dental Assistant 22.77 12025 - Dental Hygienist 51.32 12030 - EKG Technician 38.32 12035 - Electroneurodiagnostic Technologist 38.32 12040 - Emergency Medical Technician 18.34 12071 - Licensed Practical Nurse I 25.10 12072 - Licensed Practical Nurse II 28.09 12073 - Licensed Practical Nurse III 31.31 12100 - Medical Assistant 18.92 12130 - Medical Laboratory Technician 29.26 12160 - Medical Record Clerk 20.71 12190 - Medical Record Technician 23.17 12195 - Medical Transcriptionist 26.28 12210 - Nuclear Medicine Technologist 62.19 12221 - Nursing Assistant I 13.11*** 12222 - Nursing Assistant II 14.75*** 12223 - Nursing Assistant III 16.09

12224 - Nursing Assistant IV 18.06 12235 - Optical Dispenser 23.59 12236 - Optical Technician 19.36 12250 - Pharmacy Technician 22.35 12280 - Phlebotomist 25.41 12305 - Radiologic Technologist 46.29 12311 - Registered Nurse I 30.50 12312 - Registered Nurse II 37.29 12313 - Registered Nurse II Specialist 37.29 12314 - Registered Nurse III 45.09 12315 - Registered Nurse III Anesthetist 45.09 12316 - Registered Nurse IV 54.09 12317 - Scheduler (Drug and Alcohol Testing) 33.02 12320 - Substance Abuse Treatment Counselor 22.75 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 23.07 13012 - Exhibits Specialist II 28.59 13013 - Exhibits Specialist III 34.97 13041 - Illustrator I 25.55 13042 - Illustrator II 31.66 13043 - Illustrator III 38.72 13047 - Librarian 37.28 13050 - Library Aide/Clerk 17.68 13054 - Library Information Technology Systems 33.67 Administrator 13058 - Library Technician 22.42 13061 - Media Specialist I 24.29 13062 - Media Specialist II 27.17 13063 - Media Specialist III 30.29 13071 - Photographer I 20.01 13072 - Photographer II 22.39 13073 - Photographer III 27.74 13074 - Photographer IV 33.94 13075 - Photographer V 41.05 13090 - Technical Order Library Clerk 22.20 13110 - Video Teleconference Technician 23.48 14000 - Information Technology Occupations 14041 - Computer Operator I 21.06 14042 - Computer Operator II 23.56 14043 - Computer Operator III 26.26 14044 - Computer Operator IV 29.19 14045 - Computer Operator V 32.32 14071 - Computer Programmer I (see 1) 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 21.06 14160 - Personal Computer Support Technician 29.19 14170 - System Support Specialist 34.56 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 33.54 15020 - Aircrew Training Devices Instructor (Rated) 40.57

15030 - Air Crew Training Devices Instructor (Pilot) 48.64 15050 - Computer Based Training Specialist / Instructor 33.54 15060 - Educational Technologist 36.14 15070 - Flight Instructor (Pilot) 48.64 15080 - Graphic Artist 29.30 15085 - Maintenance Test Pilot Fixed Jet/Prop 48.64 15086 - Maintenance Test Pilot Rotary Wing 48.64 15088 - Non-Maintenance Test/Co-Pilot 48.64 15090 - Technical Instructor 30.06 15095 - Technical Instructor/Course Developer 36.77 15110 - Test Proctor 24.26 15120 - Tutor 24.26 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 16.41 16030 - Counter Attendant 16.41 16040 - Dry Cleaner 18.75 16070 - Finisher Flatwork Machine 16.41 16090 - Presser Hand 16.41 16110 - Presser Machine Drycleaning 16.41 16130 - Presser Machine Shirts 16.41 16160 - Presser Machine Wearing Apparel Laundry 16.41 16190 - Sewing Machine Operator 19.53 16220 - Tailor 20.31 16250 - Washer Machine 17.19 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 27.76 19040 - Tool And Die Maker 32.53 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 21.90 21030 - Material Coordinator 26.00 21040 - Material Expediter 26.00 21050 - Material Handling Laborer 16.36 21071 - Order Filler 16.15 21080 - Production Line Worker (Food Processing) 21.90 21110 - Shipping Packer 18.09 21130 - Shipping/Receiving Clerk 18.09 21140 - Store Worker I 15.63 21150 - Stock Clerk 19.64 21210 - Tools And Parts Attendant 21.90 21410 - Warehouse Specialist 21.90 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 38.42 23019 - Aircraft Logs and Records Technician 31.00 23021 - Aircraft Mechanic I 37.00 23022 - Aircraft Mechanic II 38.42 23023 - Aircraft Mechanic III 39.78 23040 - Aircraft Mechanic Helper 27.03 23050 - Aircraft Painter 35.01 23060 - Aircraft Servicer 31.00 23070 - Aircraft Survival Flight Equipment Technician 35.01 23080 - Aircraft Worker 33.00 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 33.00 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 37.00

II

23110 - Appliance Mechanic 23.50 23120 - Bicycle Repairer 22.73 23125 - Cable Splicer 50.85 23130 - Carpenter Maintenance 29.19 23140 - Carpet Layer 23.88 23160 - Electrician Maintenance 29.64 23181 - Electronics Technician Maintenance I 29.14 23182 - Electronics Technician Maintenance II 30.90 23183 - Electronics Technician Maintenance III 32.66 23260 - Fabric Worker 26.39 23290 - Fire Alarm System Mechanic 28.91 23310 - Fire Extinguisher Repairer 24.20 23311 - Fuel Distribution System Mechanic 38.20 23312 - Fuel Distribution System Operator 29.96 23370 - General Maintenance Worker 22.48 23380 - Ground Support Equipment Mechanic 37.00 23381 - Ground Support Equipment Servicer 30.99 23382 - Ground Support Equipment Worker 33.01 23391 - Gunsmith I 24.20 23392 - Gunsmith II 27.53 23393 - Gunsmith III 30.85 23410 - Heating Ventilation And Air-Conditioning 29.66 Mechanic 23411 - Heating Ventilation And Air Contidioning 30.80 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 29.98 23440 - Heavy Equipment Operator 35.17 23460 - Instrument Mechanic 28.24 23465 - Laboratory/Shelter Mechanic 29.19 23470 - Laborer 16.36 23510 - Locksmith 23.41 23530 - Machinery Maintenance Mechanic 29.18 23550 - Machinist Maintenance 23.16 23580 - Maintenance Trades Helper 17.82 23591 - Metrology Technician I 28.24 23592 - Metrology Technician II 29.32 23593 - Metrology Technician III 30.36 23640 - Millwright 31.83 23710 - Office Appliance Repairer 22.81 23760 - Painter Maintenance 22.80 23790 - Pipefitter Maintenance 29.63 23810 - Plumber Maintenance 28.04 23820 - Pneudraulic Systems Mechanic 30.85 23850 - Rigger 29.08 23870 - Scale Mechanic 27.53 23890 - Sheet-Metal Worker Maintenance 30.56 23910 - Small Engine Mechanic 21.12 23931 - Telecommunications Mechanic I 30.47 23932 - Telecommunications Mechanic II 31.74 23950 - Telephone Lineman 35.37 23960 - Welder Combination Maintenance 25.45 23965 - Well Driller 28.10 23970 - Woodcraft Worker 30.85 23980 - Woodworker 24.20 24000 - Personal Needs Occupations

24550 - Case Manager 20.32 24570 - Child Care Attendant 15.11 24580 - Child Care Center Clerk 19.94 24610 - Chore Aide 14.29*** 24620 - Family Readiness And Support Services 20.32 Coordinator 24630 - Homemaker 20.77 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 38.26 25040 - Sewage Plant Operator 32.68 25070 - Stationary Engineer 38.26 25190 - Ventilation Equipment Tender 27.94 25210 - Water Treatment Plant Operator 32.68 27000 - Protective Service Occupations 27004 - Alarm Monitor 29.81 27007 - Baggage Inspector 16.59 27008 - Corrections Officer 38.49 27010 - Court Security Officer 35.70 27030 - Detection Dog Handler 23.51 27040 - Detention Officer 38.49 27070 - Firefighter 34.73 27101 - Guard I 16.59 27102 - Guard II 23.51 27131 - Police Officer I 43.08 27132 - Police Officer II 47.88 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 18.63 28042 - Carnival Equipment Repairer 20.00 28043 - Carnival Worker 14.50*** 28210 - Gate Attendant/Gate Tender 18.06 28310 - Lifeguard 17.24 28350 - Park Attendant (Aide) 20.21 28510 - Recreation Aide/Health Facility Attendant 14.75*** 28515 - Recreation Specialist 25.04 28630 - Sports Official 16.07 28690 - Swimming Pool Operator 22.75 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 35.11 29020 - Hatch Tender 35.11 29030 - Line Handler 35.11 29041 - Stevedore I 32.96 29042 - Stevedore II 37.26 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 46.47 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 32.05 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 35.29 30021 - Archeological Technician I 20.59 30022 - Archeological Technician II 22.84 30023 - Archeological Technician III 28.30 30030 - Cartographic Technician 28.30 30040 - Civil Engineering Technician 29.50 30051 - Cryogenic Technician I 31.29 30052 - Cryogenic Technician II 34.56 30061 - Drafter/CAD Operator I 20.42 30062 - Drafter/CAD Operator II 22.84

30063 - Drafter/CAD Operator III 25.47 30064 - Drafter/CAD Operator IV 31.34 30081 - Engineering Technician I 20.77 30082 - Engineering Technician II 23.31 30083 - Engineering Technician III 26.07 30084 - Engineering Technician IV 32.30 30085 - Engineering Technician V 39.50 30086 - Engineering Technician VI 47.80 30090 - Environmental Technician 25.64 30095 - Evidence Control Specialist 28.26 30210 - Laboratory Technician 23.32 30221 - Latent Fingerprint Technician I 35.65 30222 - Latent Fingerprint Technician II 39.38 30240 - Mathematical Technician 33.63 30361 - Paralegal/Legal Assistant I 21.71 30362 - Paralegal/Legal Assistant II 26.91 30363 - Paralegal/Legal Assistant III 32.91 30364 - Paralegal/Legal Assistant IV 39.82 30375 - Petroleum Supply Specialist 34.55 30390 - Photo-Optics Technician 28.30 30395 - Radiation Control Technician 34.56 30461 - Technical Writer I 28.05 30462 - Technical Writer II 34.31 30463 - Technical Writer III 41.52 30491 - Unexploded Ordnance (UXO) Technician I 29.53 30492 - Unexploded Ordnance (UXO) Technician II 35.73 30493 - Unexploded Ordnance (UXO) Technician III 42.83 30494 - Unexploded (UXO) Safety Escort 29.53 30495 - Unexploded (UXO) Sweep Personnel 29.53 30501 - Weather Forecaster I 31.29 30502 - Weather Forecaster II 38.07 30620 - Weather Observer Combined Upper Air Or (see 2) 25.47 Surface Programs 30621 - Weather Observer Senior (see 2) 28.30 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 35.73 31020 - Bus Aide 17.47 31030 - Bus Driver 23.46 31043 - Driver Courier 18.18 31260 - Parking and Lot Attendant 14.42*** 31290 - Shuttle Bus Driver 17.95 31310 - Taxi Driver 15.95 31361 - Truckdriver Light 19.53 31362 - Truckdriver Medium 21.91 31363 - Truckdriver Heavy 23.55 31364 - Truckdriver Tractor-Trailer 23.55 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 17.42 99030 - Cashier 14.34*** 99050 - Desk Clerk 14.92*** 99095 - Embalmer 24.43 99130 - Flight Follower 29.53 99251 - Laboratory Animal Caretaker I 17.52 99252 - Laboratory Animal Caretaker II 18.81 99260 - Marketing Analyst 30.83

99310 - Mortician 24.43 99410 - Pest Controller 18.99 99510 - Photofinishing Worker 21.35 99710 - Recycling Laborer 29.04 99711 - Recycling Specialist 34.73 99730 - Refuse Collector 27.03 99810 - Sales Clerk 14.73*** 99820 - School Crossing Guard 20.28 99830 - Survey Party Chief 32.22 99831 - Surveying Aide 21.05 99832 - Surveying Technician 29.30 99840 - Vending Machine Attendant 14.31*** 99841 - Vending Machine Repairer 17.47 99842 - Vending Machine Repairer Helper 14.31***

***Workers in this classification may be entitled to a higher minimum wage under Executive Order 14026 ($15.00 per hour) or 13658 ($11.25 per hour). Please see the Note at the top of the wage determination for more information. Please also note that the minimum wage requirements of Executive Order 14026 and 13658 are not currently being enforced as to contracts or contract-like instruments entered into with the federal government in connection with seasonal recreational services or seasonal recreational equipment rental for the general public on federal lands.

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.80 per hour up to 40 hours per week or $192.00 per week or $832.00 per month

HEALTH & WELFARE EO 13706: $4.41 per hour up to 40 hours per week or $176.40 per week or $764.40 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor 3 weeks after 5 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Juneteenth National Independence Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE

FOLLOWING:

1) COMPUTER EMPLOYEES: This wage determination does not apply to any individual employed in a bona fide executive administrative or professional capacity as defined in 29 C.F.R. Part 541. (See 41 C.F.R. 6701(3)). Because most Computer Systems Analysts and Computer Programmers who are paid at least $27.63 per hour (or at least $684 per week if paid on a salary or fee basis) likely qualify as exempt computer professionals under 29 U.S.C. 213(a)(1) and 29 U.S.C. 213(a)(17) this wage determination may not include wage rates for all occupations within those job families. In such instances a conformance will be necessary if there are nonexempt employees in these job families working on the contract.

Job titles vary widely and change quickly in the computer industry and are not determinative of whether an employee is an exempt computer professional. To be exempt computer employees who satisfy the compensation requirements must also have a primary duty that consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

Any computer employee who meets the applicable compensation requirements and the above duties test qualifies as an exempt computer professional under both section 13(a)(1) and section 13(a)(17) of the Fair Labor Standards Act. (Field Assistance Bulletin No. 2006-3 (Dec. 14 2006)). Accordingly this wage determination will not apply to any exempt computer employee regardless of which of these two exemptions is utilized.

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition where uniform cleaning and maintenance is made the responsibility of the employee all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount or the furnishing of contrary affirmative proof as to the actual cost) reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However in those instances where the uniforms furnished are made of ""wash and wear"" materials may be routinely washed and dried with other personal garments and do not require any special treatment such as dry cleaning daily washing or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract by the contractor by law or by the nature of the work there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the ""Service Contract Act Directory of Occupations"" Fifth Edition (Revision 1) dated September 2015 unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE Standard Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e. the work to be performed is not performed by any classification listed in the wage determination) be classified by the contractor so as to provide a reasonable relationship (i.e. appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification wage rate and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award the contractor prepares a written report listing in order the proposed classification title(s) a Federal grade equivalency (FGE) for each proposed classification(s) job description(s) and rationale for proposed wage rate(s) including information regarding the agreement or disagreement of the authorized representative of the employees involved or where there is no authorized representative the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action together with the agency's recommendations and pertinent information including the position of the contractor and the employees to the U.S.

Department of Labor Wage and Hour Division for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt the Wage and Hour Division approves modifies or disapproves the action via transmittal to the agency contracting officer or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See 29 CFR 4.6(b)(2)(iii)).

Information required by the Regulations must be submitted on SF-1444 or bond paper.

When preparing a conformance request the ""Service Contract Act Directory of Occupations"" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember it is not the job title but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split combine or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1))."

CLAUSES INCORPORATED BY REFERENCE

52.204-7 System for Award Management OCT 2018 52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-13 System for Award Management Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting AUG 2020 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

NOV 2021

52.212-1 Instructions to Offerors--Commercial Products and Commercial Services

NOV 2021

52.212-4 Contract Terms and Conditions--Commercial Products and Commercial Services

NOV 2021

52.232-40 Providing Accelerated Payments to Small Business Subcontractors

NOV 2021

52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.237-1 Site Visit APR 1984 52.237-2 Protection Of Government Buildings, Equipment, And

Vegetation

APR 1984

52.247-34 F.O.B. Destination NOV 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

SEP 2022

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7008 Compliance With Safeguarding Covered Defense Information

Controls

OCT 2016

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

DEC 2019

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

MAY 2016

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services -- Representation

MAY 2021

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

JAN 2021

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements MAR 2022 252.204-7020 NIST SP 800-171 DoD Assessment Requirements MAR 2022 252.217-7028 Over And Above Work DEC 1991 252.223-7006 Prohibition On Storage, Treatment, and Disposal of Toxic or

Hazardous Materials

SEP 2014

252.225-7001 Buy American And Balance Of Payments Program-- Basic JUN 2022 252.225-7002 Qualifying Country Sources As Subcontractors MAR 2022 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.237-7010 Prohibition on Interrogation of Detainees by Contractor

Personnel

JUN 2013

252.239-7010 Cloud Computing Services SEP 2022 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.244-7000 Subcontracts for Commercial Items JAN 2021 252.246-7003 Notification of Potential Safety Issues JUN 2013 252.246-7004 Safety of Facilities, Infrastructure, and Equipment for

Military Operations

OCT 2010

252.246-7008 Sources of Electronic Parts MAY 2018

ADDENDUM TO 52.212-1

1. SUBMISSION OF QUOTATIONS: Quotations must be received no later than the date stated in box 8, page 1 of this solicitiation. Quotation shall be submitted via email. Please respond to Sergeant Chase Fullerton, chase.fullerton@usmc.mil and Sergeant Hanna Tilley, hanna.bolduc@usmc.mil directly with quotation.

2. QUESTIONS: Questions shall be submitted by email no later than 2 days after issuance of the solicitation to the email address listed below. No phone questions will be accepted. The deadline is necessary to ensure timely award and the Government may, in its sole discretion, choose not to respond to questions received after the deadline.

All questions will be reviewed and responded to by an amendment to the solicitation. Email questions to Sergeant Chase Fullerton, chase.fullerton@usmc.mil and Sergeant Hanna Tilley, hanna.bolduc@usmc.mil

3. PERIOD OF ACCEPTANCE OF OFFERORS: The pricing terms and conditions of the proposal shall be valid for 90 days unless a longer time is stated otherwise in the quote.

4. SAM. Offerors must be registered in the System for Award Management (SAM) database. Information in SAM should be current, if not – completion of the attached FAR Provision 52.212-3, Certifications and Representations is required with quotation. Information on registering in SAM may be obtained from www.sam.gov or calling 866- 606-8220. Registration in SAM is free.

5. WIDE-AREA WORKFLOW – RECEIPT AND ACCEPTANCE. As a condition of receipt of any resulting order, the Contractor agrees to implement the Department of Defense (DOD) web-based application. Information on registering in WAWF/iRAPT may be obtained from https://wawf.eb.mil/xhtml/unauth/registration/notice.xhtml or calling 866-618-5988. Registration in WAWF/iRAPT is free.

6. COMPLETE RESPONSIVE QUOTE: The Government will award a Firm Fixed Price Contract resulting from this solicitation to the responsible quoter whose quotation conforming to the solicitation. A complete responsive quote must be received for consideration. A complete quote is (a) as follows:

(a) Technical Acceptability— must meet the following:

i) Salient characteristices listed below in 52.212-2, Evaluation, Technical

CLAUSES INCORPORATED BY FULL TEXT

52.212-2 EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

(i) technical capability

(ii) price

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all…