D1. Combined Synopsis Solicitation.pdf

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 of the Federal Acquisition Regulations (FAR), as supplemented with additional information included in this notice. Offers are being requested, and a written solicitation will not be issued.

The solicitation number M00264-26-Q-JW12 is issued as a request for quotation (RFQ) using FAR Part 13 procedures.

This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-06.

This opportunity is 100% Set-Aside for Small Business, and the associated North American Industrial Classification System (NAICS) code is 336212.

The action resulting from this opportunity will be a Firm Fixed Price (FFP) Purchase Order.

DESCRIPTION OF REQUIREMENT:

CLIN SUPPLIES / SERVICES QTY UNIT COO* UNIT PRICE

0001 Roll-Off Trailer 1 Each _____

Salient Characteristics

Capacity and Weight

• Hoist Rating: Minimum 16,000 lbs capacity

• Trailer GVWR: Minimum 16,000 lbs

• Payload Capacity: Minimum 11,400 lbs

• Maximum Tare Weight: Not to exceed 5,000 lbs (to preserve payload capacity)

• Container Compatibility: Must accommodate up to 20-yard open-top roll-off containers

Dimensions

• Overall Length: Maximum 20 feet 8 inches

• Overall Width: 98.5”

Chassis and Running Gear

• Frame & Rails: Heavy-duty steel structural tubing (e.g., equivalent to 6” x 3” x 1/4” wall)

• Axles: Tandem axles, minimum 8,000 lbs rating per axle

• Brakes: Electric brakes equipped on all axles

• Hubs: Accessible, easily greasable hub system (e.g., EZ Lube or equivalent)

• Tires: Minimum 16" wheels, Load Range G or higher rating

• Hitch Type: 2-5/16” Ball hitch

• Landing Gear: Hydraulic jack system

Hydraulics & Hoist System

• Power Unit / Motor: Gas-powered engine, 9 to 10 HP class (e.g., Kohler, Honda, or equivalent),

• frame-mounted

• Engine Protection: Fully enclosed shielding on front and sides to protect from weather and debris

• Hydraulic Controls: Wireless remote control operation required

• Hoist & Cable Cylinders: Dual heavy-duty welded cylinders (tie-rod style not preferred)

• Reeving System: Split reeving system or functionally equivalent independent cylinder operation

• Cable Assembly: 5/8” diameter heavy-duty cable with heavy-duty sheaves

• Fluid: Standard commercial-grade hydraulic fluid (e.g., Dexron III or equivalent)

Hardware & Accessories

• Rail Slides: Replaceable, high-durability, low-friction slides (e.g., UHMW plastic or equivalent)

• Rollers & Pulleys: Industry-standard nose rollers; pulleys equipped with greasable bushings or maintenance-free bearings

• Tarping System: Automated/electric tarp system integrated with spring-loaded arms o Paint & Finish: Industrial anti-corrosion surface prep (e.g., sandblasted) with heavy-duty topcoat (e.g., Urethane, Powder Coat, or equivalent)

Required Delivery Date: 30 days after award

The provision at 52.212-1, Instructions to Offerors-Commercial, applies to this acquisition.

The provision at 52.212-2, Evaluation-Commercial Items, applies to this acquisition as follows: Best Value based on the following factors:

(a) The Government will award a contract resulting from this solicitation to the responsible quoter whose quotation conforming to the solicitation will be most advantageous and provides the greatest overall benefit (best value) to the Government.

(a)(1) The basis for award is PRICE AND OTHER FACTORS per FAR 13.106-1(a)(2) with the evaluation procedures per FAR 13.106-2 which includes COMPARATIVE

EVALUATIONS OF QUOTATIONS.

(a)(2) Evaluation procedures per FAR 13.106-2

(i) all quotations will be reviewed to ensure conformance to all matters with respect to the solicitation. The quotations that conform to all matters with respect to the solicitation will be sorted from lowest to highest price and considered for award.

(A) Conforming to all matters with respect to the solicitation:

Quotations must clearly demonstrate the quoted items meet or exceed the salient characteristics or extended description of supplies/services; must address each general and performance requirement with respect to the Statement of Work; must specify delivery dates; and must meet all the terms and conditions of the solicitation.

(ii) a Comparative Evaluation of all quotations will be performed.

(A) Comparative Evaluation entails: identifying quotations that exceed the minimum requirements and considering if selecting a quotation other than the lowest-priced will be most advantageous and provide the greatest overall benefit (best value) to the Government.

(B) The Government reserves the right to select for award either the lowest-priced quotation or other than the lowest-priced quotation.

(iii) to be selected for award, the prospective awardee must have satisfactory past performance and quote a fair and reasonable price.

(A) Past Performance:

The apparent successful, prospective contractor shall have satisfactory past performance.

Past Performance shall be evaluated in accordance with FAR 13.106-2(b)(3)(ii) and DFARS 213.106-2(b)(i).

(B) Fair & Reasonable Price:

Before making the award, the Contracting Officer will use the techniques FAR 13.106- 3(a) to determine that the apparent successful, prospective awardee is quoting a fair and reasonable price.

DELIVERY DATE AND LOCATION

The clause at 52.212-4, Contract Terms and Conditions-Commercial Items, and the below FAR provisions and clauses are applicable to the acquisition: 52.203-11; 52.203-18; 52.203- 19; 52.204-7; 52.204-9; 52.204-10; 52.204-13; 52.209-6; 52.209-10; 52.214-34; 52.214-35;

52.219-6; 52.219-28; 52.222-3; 52.222-35; 52.222-36; 52.222-41; 52.222-42; 52.222-50;

52.222-55; 52.222-62; 52.222-90; 52.223-23 (DEV 2025-O0004); 52.225-3; 52.225-4;

52.226-8; 52.232-33; 52.232-39; 52.232-40; 52.233-3; 52.233-4; 52.240-90; 52.240-91; and 52.244-6.

DFARS Provisions and Clauses: 252.203-7000; 252.203-7002; 252.203-7005; 252.204- 7003; 252.204-7004; 252.204-7008; 252.204-7012; 252.204-7016; 252.204-7017; 252.204- 7018; 252.204-7019; 252.204-7024; 252.223-7008; 252.225-7001; 252.225-7012; 252.225- 7048; 252.225-7055; 252.225-7056; 252.225-7059; 252.225-7060; 252.232-7003; 252.232- 7006; 252.232-7010; 252.237-7010 and 252.247-7023.

The Defense Priorities and Allocations System (DPAS) and assigned rating do not apply.

QUESTIONS ARE DUE: 14 July 2026 at 4:00 PM (Eastern Time).

QUOTATIONS ARE DUE (CLOSING DATE/TIME): 16 July 2026 at 4:00 PM (Eastern Time).

Quotes/Offers received after this date and time may be deemed ineligible for award.

SUBMIT QUOTATIONS electronically to:

Contract Specialist: Jesse T. Wise Regional Contracting Office Quantico, VA 22134 Email: jesse.t.wise.mil@usmc.mil

DISCLAIMER. This is a Request for Quotation (RFQ) the terms and conditions set within are not binding and therefore the Government reserves the right to amend the terms up until Purchase Order/Offer issuance. A quotation submitted in response is not an offer and, consequently, cannot be accepted by the Government to form a binding contract. Therefore, issuance by the Government of an order in response to a supplier’s quotation does not establish a contract. The order is an offer by the Government to the supplier to buy certain supplies or services upon specified terms and conditions. A contract is established when the supplier accepts the offer. See FAR 13.004(a)