D040-DR001 REV A.pdf

PDF 54 KB Posted

Attached to
Precipitation Sticks for NWS Cooperative Observer Program (COOP)
Solicitation number
1305M225Q0186
Issued by

About this file

This engineering drawing (D040-DR001 REV A) details the technical specifications for an 8-inch Standard Rain Gauge used by the National Weather Service's Cooperative Observer Program (COOP). The document provides a comprehensive schematic with precise dimensional requirements, including an 8.00-inch diameter reference, 27.0-inch overall reference height, and specific component details such as a measuring stick, funnel cap, overflow container, measuring tube, stand assembly, and nameplate. Key notes specify installation instructions, such as attaching the nameplate with adhesive, lightly tightening set screws to avoid container wall damage, and ensuring the equipment name reads "Standard Rain Gauge 8-Inch".

The drawing, prepared by the Engineering Division in Silver Spring, MD, was developed by the U.S. Department of Commerce's National Oceanic & Atmospheric Administration (NOAA) National Weather Service, with revision A adding shoulder screws on 9/30. The technical drawing includes a detailed parts list referencing additional drawing numbers for each component, precise dimensional tolerances (±.005 for 3 decimal places, ±.02 for 2 decimal places), and identifies the Federal Supply Chain Management (FSCM) number as 82187. The drawing serves as a critical technical reference for manufacturers producing these precision rainfall measurement instruments.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

NOTES. UNLESS OTHERWISE SPECIFIED:

1. INTERPRET DRAWING IN A/W DOD-STD-1OO.

2. FOR SPECIFICATIONS, SEE NWS SPEC. NO. DO40-SPOO1.

3. ATTACH NAMEPLATE WITH ADHESIVE IN APPROXIMATE POSITION AS SHOWN.

4. TIGHTEN SET SCREWS LIGHTLY SO AS NOT TO DAMAGE CONTAINER WALLS.

5. NAMEPLATE EQUIPMENT NAME SHALL READ "STANDARD RAIN GAUGE 8-INCH".

EARlH

5 STAKE

3 PLS

REF

f--- 8.00 DIA. -----j

I REF. I

SET SCREWS ------------~ ----------~

5 2 PLS

REF SEE 4NOTE

5 CHANNEL

3 PLS

REF

LEGS ARE EQUALLY

SPACED 120• APART

27.0 REF.

l

24. REF.

J

REVISIONS

ZONE LlR DESCRIPTION DATE

REV.

BY

APP'D

A3 SHOULDER SCREWS ADDED 9/30 H. HOPPE

MEASURING

STICK

e

PARTS UST CONTINUED ON SHEET 2.

6 NAMEPLATE SEE DWG. WS-N-SDOO1

5 STAND ASSEMBLY SEE DWG. DO4O-MP4-DRO01

4 MEASURING STICK SEE DWG. DO4O-M1-DROO1

3 MEASURING TUBE SEE DWG. DO4O-MP3-DRO01

2 FUNNEL CAP SEE DWG. DO4O-MP1-DR001

OVERFLOW CONTAINER SEE DWG. DO4O-MP2-DRO01

FIND El£C REF NOMENCLATURE QTY PART OR DWG CODE SPECIFICATION

NO. DES OR DESCRIPTION REQD IDENTIFYING SIZE IDENT OR MATERIAL

LIST OF MATERIAL

UNLESS 01HER"MSE SPEaFIED:

DIMENSIONS ARE IN INQIES

TOLERANCES, ANGLES, :,5'

3 PLACES DEaMAI.S :1:.005 2 PLACES DEallAI.S :.D2

ENGINEERING DIVISION

SILVER SPRING, MD. 20910

PREPARED MWD 02/93

QIECKED R.E.B. 03/09

DESIGN D.A.D 03/09

APPROVED

D. BOSCO 03/09

FSCM 82187

U.S. DEPARTMENT OF COMMERCE

NATIONAL OCEANIC a: AlMOSPHERIC ADMINISTRATION

NATIONAL WEA1HER SER\<ICE

STANDARD RAIN GAUGE

8-INCH

SIZE DAlE DRAWING NO.

D D040-DROO1

SCALE: NONE SHEET

File details come from the government source that posted it. Updated .