D Salient Characteristics RFQ-038 6pages.pdf

Technical Information 10-2

ORTHOSCAN MINI C-ARM OPERATORS MANUAL MODELS: 1000-0015 / 1000-0016 / 1000-0017

050-0041 REV L

Orthoscan TAU Product Specification

NOTE: Product design and specifications are subject to change without Notice

INDUSTRY DEVICE CLASSIFICATIONS

Equipment Classification Class 1 Device

Water ingress protection classification

Ordinary Equipment

Mode of operation Continuous Operation

Electric shock protection classification

Type B applied part

COUNTRY DEVICE CLASSIFICATIONS

Mini C-arm X-Ray Device Class II (FDA) / Class IIb (EU) / Class III (Canada)

AC POWER REQUIREMENTS

Nominal rated line voltage Model: 1000-0015/ 1000-0016 / 1000-0017:

• 100 / 120 / 230 V~ (factory preset)

Frequency (Hertz) 50 Hz or 60 Hz

Line voltage regulation + 10% daily line reg.

Current <5A at 120 V~, ≤5A at 100 V~, ≤3A at 230 V~

Mains Fuse Ratings

Model: 1000-0015/ 1000-0016/ 1000-0017:

• 100 VAC~: Bel Fuse 5ET (P) 5-R

• 120 VAC~: Bel Fuse 5ET (P) 4-R

• 230 VAC~: Bel Fuse 5ET (P) 2-R

LASER SPECIFICATION

Laser Beam Class IIa: 3.5mW, 635nm Wavelength

Laser Light Class 2: IEC 60825-1

FDA Compliance Compliant to FDA CFR Part 1040.10

Equipment Marking Warning (IEC 60825-1)

X-RAY ASSEMBLY SPECIFICATIONS

Duty cycle at 75 kVp / 0.1mA 1.00 (continuous)

X-Ray tube Petrick P030.40.20GW (OS)

Beam filtration 2.5mm Aluminum equivalent

Focal spot 42.5 microns

Rated peak tube potential 80kVp

Tube kVp range 40kVp to 80kVp

Tube current range 40µA to 160µA (Canada: 40µA to 110µA)

Attachment D: Salient Characteristics

Technical Information 10-3

050-0041 REV L

Deviation from indicated values kV +7%, µA +10%

Heat Capacity 3900 J

Target Angle 20°

Max. Continuous Power 50 W

Anode Material Copper w/ Tungsten Target

Cathode Material Nickel

Tube Cooling/ High Voltage Insulation

High Dielectric Transformer Oil

ADDED OPTIMIZED DOSE FILTER SPECIFICATIONS

Material Cu (copper)

Thickness 0.1mm

Method of use User engages for adult and pediatric imaging to reduce entrance Dose

Accessible Not directly accessible to operator

GENERATOR/ HIGH VOLTAGE POWER SUPPLY (HVPS) CHARACTERISTICS

Mode(s) Of Operation Model 1000-0015: Continuous Model 1000-0016/ 1000-0017: Pulsed and Continuous

HVPS Operating Voltage Range 40kV - 78kV

HVPS Operating Current Range 40µA to 160µA

Fluoroscopy Pulse Rate per Second Model 1000-0016/ 1000-0017: 30 / 15 / 7.5 / 2.0 Model 1000-0015: Continuous

ENVIRONMENTAL SPECIFICATIONS

Storage: Temperature Range 0˚C (32˚F) to 55˚C (131˚F)

Storage: Relative Humidity >0% to <100% (no condensation)

Storage: Atmospheric Pressure 500hPa to 1060hPa

Operating: Temperature (Ambient) 15º to 32ºC (59º to 90ºF)

Operating: Humidity (Ambient) 0% – 90% relative humidity, non-condensing

Technical Information 10-4

IMAGING SPECIFICATIONS

Image processing Digital

Monitor Model: 1000-0015: 24” – Touchscreen Model: 1000-0016: 24” – Touchscreen Model: 1000-0017: 27” – Touchscreen

Resolution Model: 1000-0015/1000-0016: 1920x1200 (WUXGA) Model: 1000-0017: 1920x1080 (FHD)

Standard Image 30 Frames per second (fps)

DVR/Cine 30 Frames per second (fps)

Video Output Signal (Ext’l Display) HDMI

Useful Entrance Field Size:

Model: 1000-0015 (12x15) – 14.5 x 11.5 (cm) Model: 1000-0016 (15x15) - 15 x 15 (cm) Model: 1000-0017 (20x20) – 20.4 x 20.4 (cm)

Image Capacity 26,000

Video Capacity 14.4 min

Technical Information 10-5

IMAGE DETECTORS (SSXI) SPECIFICATIONS

TAU 1512 - CMOS SSXI

Sensor Type CMOS Active Pixel Sensor

Scintillator GdOx

Pixel pitch/Size 75μm / 74.8μm

Sensitive area 14.5x 11.5 cm

Pixel Matrix 1944 x 1536 pixels

ADC resolution 14 bits kV Range 12 to 130 kV

Mechanical

Weight 2.2kg (4.8lbs)

Dimension L x W x H 22.3 x 15.0 x 4.2 cm

Operating Temperature Range +100C to +400C

Storage Temperature -100C to +500C

Communication

Cameral link GigE

TAU 1515 -Detector - CMOS SSXI

Sensor Type CMOS Active Pixel Sensor

Scintillator GdOx

Pixel width x height 99 x 99 μm

Sensitive area 15.0 x 15.0 cm

Total Pixels 1548 x 1548 pixels

ADC resolution 14 bits kV Range 40 to 125 kV

Mechanical

Weight 2.0kg (4.4lbs)

Technical Information 10-6

SYSTEM MECHANICAL CHARACTERISTICS

Cabinet Footprint: C-Arm Extended 208cm (82”)

Cabinet Footprint: C-Arm Retracted 101cm (39.8”)

Base Cabinet Footprint – Width 73.7cm (29.0”)

Base Cabinet Footprint – Length 83.8cm (33.0”)

C-Arm Arc Depth 50.8cm (20.0”)

C-Arm Orbital Range 160°

C-Arm Pivotal Range 430°

Dimension L x W x H 22.5 x 19.0 x 3.8 cm

Operating Temperature Range +100C to +400C

Storage Temperature -100C to +550C

Communication

Camera link GigE

TAU 2020 -Detector - CMOS SSXI

Sensor Type CMOS Active Pixel Sensor

Scintillator 600µm CsI

Pixel width x height 99 x 99 μm

Sensitive area 20.4 x 21.8 cm

Total Pixels 2236 x 2064 pixels

ADC resolution 16 bits kV Range 40 to 125 kV

Mechanical

Weight 4.5kg (10lbs)

Dimension H x W x D (cm) 23.5 x 29.2 x 5.0

Operating Temperature Range +100C to +550C

Storage Temperature -100C to +550C

Communication

Camera link GigE

Technical Information 10-7

Lateral Rotation: Wig Wag 320°

Flex Arm Vertical Range 67.3cm (26.5”)

Monitor Arm Rotational Range Shoulder: 216°, Elbow: 370°, Wrist: 200°

Monitor Arm: Horizontal reach 66cm (26“)

Monitor: Vertical height 48.3cm (19“)

Monitor: Vertical travel 35.6cm (14”)

Monitor: Height at lowest position 113cm (48“)

Detector: Highest point above ground

111.8cm (44.0”)

Ground Clearance 10.1cm (4.0“)

Rear Casters Lockable / Bi-directional

Curb Weight (~215 kg ~475 lbs)

Cord Length 7.62m (25 feet)

Printer Spacing 8.9cm x 16cm (3.5“ x 6.25“)

SOURCE TO DETECTOR DISTANCES

Source to Detector Distance (SDD) 45cm (17.72”)

Free Space (Functional SID) 26cm (10.24”) (w/Spacer Cone) 35cm (13.8”) (Optional Spacing w/o Spacer Cone)

Source to Skin Distance (SSD) 10cm (3.94”) (Spacing w/o Spacer Cone) 19cm (7.48”) (Spacing w/Spacer Cone)