QUESTIONS_AND_ANSWERS_.pdf
PDF 13 KB Posted
- Attached to
- Industrial Paper Cutter
- Solicitation number
- CutterFSA091818
About this file
Updated Q&A from 09/19/2018
View the file
Other files
| File | Type | Posted |
|---|---|---|
| QUESTIONS_AND_ANSWERS_.pdf | ||
| Industrial_Paper_Cutter_-_FBO_Posting_091818.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
QUESTIONS AND ANSWERS FOR
RFQ # CUTTERFSA091818 –
Updated 09/19/2018
Question #1:
Do you have the measurements for the double door that this unit must go through?
Answer #1:
It is actually not a double door. It is a single door that is 72” wide by 84” high.
Question #2:
Do you have a pallet jack that we can use to move the Baumcutter that needs to be moved from the warehouse to X-Ray Room?
Answer #2:
We have electric forklifts that will lift and move the Baumcutter.
Question #3:
Will as pallet jack fit under this cutter or does the cutter have casters?
Answer #3:
Not on casters.
Question #4:
How far is it from the USDA Warehouse to the X-Ray room? When you say “it is within the same facility” are you saying the warehouse and X-Ray room are in the same building? If so, do we have to take this down or up an elevator? Will the cutter fit through an elevator?
Answer #4:
Same building just different area, approximately 150’ from current location. No elevator needed.
Question #5:
Will this Baumcutter fit through the doors or does it have to be taken apart too?
Answer #5:
X-Ray room will accommodate the forklift and Baumcutter with no disassembly.
File details come from the government source that posted it.