CT2004-10 Solicitation.pdf

[!) 27a. SOLICITATION INCORPORATES BY REFERENCEFAR 52.212-1, 62.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA~ ARE 0 ARE NOT ATTACHED o 27b. CONTRACTfPURCHASEORDERINCORPORATESBY REFERENCEFAR52.212-4. FAR52.212-5 IS ATTACHED. ADDENDA 0 ARE 0 ARE NOT ATTACHED

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 1449 (10-951

Prescribedby GSA - FAR(48 CFR)53.212

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUSITIONNUMBER PAGE1 OF

OFFEROR TO COMPLETE BLOCKS 12,17,23,24 & 30 5000027342

2. CONTRACTNO. 3.AWARDIEFFECTIVEDATE

14. ORDER NUMBER

5. SOLICITATIONNUMBER 6. SOLICITATIONISSUEDATE

CT2004-10 06/16/2010

7. FOR SOLICITATION a.NAME b. TELEPHONENUMBER(No collect calls} 8. OFFERDUEDTILOCALTIME

INFORMATION CALL: Ben Hanson 812-238-3351 07/16/2010 2:00PM

CODE I 10. THISAQUISITIONIS 11. DELIVERYFORFOB 12. DISCOUNTTERMS

9. ISSUEDBY o UNRESTRICTED

DESTINATIONUNLESS

Federal Prison Industries BLOCKIS MARKED Nat 30

I[] SETASIDElOO'" FOR 0 SEE SCHEDULEFCI Ter re Haute /'

IKI SMALLBUSINESS4200 Bureau Road NQrth 0 13a. THIS CONTRACTIS A RATEDORDER o SMALLDISADV.BUSINES

UNDERDPAS(15 CFR7001

Terre Haute, In 47802 08(A) 13b. RATING

SIC: 14. METHODOF SOLICITATION

SIZESTANDARD:500 Emp. 0 RFQ 0 IFB RFP

15. DELIVER TO CODE I 16. ADMINISTERED BY CODEI

UNICOR, FPI Central Office 320 First Street NW

Washington, DC 20534

17a. CONTRACTOR/OFFERORCODE I 9999999991 FACILITY CODEI 18a. PAYMENTWILLBE MADEBY CODE I

-, DC

TELEPHONE NO. TIN:

Den.

o 17b. CHECK IF REMITANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER 18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW

IS CHECKED 0 SEE ADDENDUM

19. 20. 21. 22. 23. 24.

ITEM NO. SCHEDULE OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

See Section B

25. ACCOUNTING AND APPROPRIATION DATA

126. TOTAL AWARD AMOUNT (For Govr. Use Only}

28. CONTRACTORIS REQUIREDTO SIGNTHISDOCUMENTAND RETURN...1....COPIES 29. AWARDOF CONTRACT:REFERENCECT2004-10 TO ISSUINGOFFICE.CONTRACTORAGREESTO FURNISHAND DELIVERALL ITEMSSET OFFERDATED. YOUROFFERON SOLICITATION(BLOCK51, Q9 FORTHOR OTHERWISEIDENTIFIEDABOVEAND ON ANY ADDITIONALSHEETSSUBJECTTO o INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH HERIN, THE TERMS AND CONDITIONS SPECIFIED HEREIN. ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (S/GNATURE OF CONTRACTING OFF/CER}

30b. NAME AND TITLE OF SIGNER (TYPE OR PR/NT} 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (TYPE OR PR/NT} 31c. DATE SIGNED

06/17/2010

Ben Hanson 812-238-3351

32a. QUANTITY IN COLUMN 21 HAS BEEN 33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

o RECEIVED o INSPECTED o ACCEPTED. AND CONFORMS TO THE I PARTIAL I I FINALCONTRACTEXCEPTAS NOTED

36. PAYMENT 37. CHECKNUMBER

32b. SIGNATUREOFAUTHORIZEDGOVT.REPRESENTATIVE 32c. DATE o COMPLETE o PARTIAL o FINAL

38. SfR ACCOUNT NUMBER 39. SfR VOUCHER NUMBER 40. PAID BY

42a. RECEIVED BY (Print}

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE 42b. RECEIVEDAT (Location}

42c. DATE REC'D (YY/MM/DD} 42d. TOTAL CONTAINERS

Request For Quote

Terms of delivery: DST

Commercial Item, Thread, for inmate clothing program produced at various FPI facilities.

FOB Destination. All line items are estimates only.

Lines 1-5; 2 year Base for Oakdale, LA

Lines 6-10; Option 1 for Oakdale, LA

Lines 11-15; Option 2 for Oakdale, LA

Lines 16; 2 year Base for Ray Brook, NY

Lines 17; Option 1 for Ray Brook, NY

Lines 18; Option 2 for Ray Brook, NY

SBCTION B

SUPPLIBS OR SBRVICBS AND PRICBS/COSTS

Item No. SUPPLIES OR SERVICES

00001 THD0142

A-A-50199,CTT,OVD,50,I,2

UNICOR PART #:THD0142

POLY CORE COTTON COVER##

TEX NUMBER:T-50##

COLOR:OLIVE DRAB, C.A. #66022#

DESCRIPTION:THREAD

ADJ:COTTON COVERED/POLY CORE

TICKET SIZE:MH-40

TYPE: I

PLY:2

U/M:YARD

PROCUREMENT SPEC: A-A-50199

Quantity !!il:!

5,000,000.000 YD

UNIT PRICE AMOUNT IN US$ PR Number Del.Date

5000027342

TEX SIZE:T-50

TICKET SIZE:MH-40

YARN SIZE:33/3

STRENGTH SINGLE END:4.56 LBS

ELONGATION: 19.40%

SHRINKAGE: 1. 00%

LOOP STRENGTH:5.90 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:54.7 LBS

CHAIN STITCH SEAM STRENGTH:62.0 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (0 wind): CLOCKWISE

NEEDLE SIZE METRIC: 100

DJU6200007332 PAGE 2 OF 31

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No. SUPPLIES OR SERVICES Quantity ~

00002 THD0275 15,000,000.000 YD

CTT,KHK,3-PLY,#30,AA-50199

UNICOR PART#:THD0275

POLY CORE COTrON COVER

TEX NUMBER:T-60

COLOR: KHAKI

DESCRIPTION:THREAD

ADJ:COTrON COVERED/POLY CORE

TEX SIZE:T-60

TICKET SIZE:30

TYPE:

PLY:3

U/M:YARD

M/L:A-A-50199

AMOUNT IN US$ PR Number Del.Date

5000027342

UNIT PRICE

TEX SIZE:T-60

TICKET SIZE:30

YARN SIZE:18/2

STRENGTH SINGLE END: 7.14 LBS

ELONGATION:24.29t

SHRINKAGE:1.00t

LOOP STRENGTH:9.28 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:86.9 LBS

CHAIN STITCH SEAM STRENGTH:98.5 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (0 wind): CLOCKWISE

NEEDLE SIZE METRIC:110

DJU6200007332 PAGE 3 OF 31

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No. SUPPLIES OR SERVICES

00003 THD0274

CTT,OD,3-PLY,#30,AA-50199

UNICOR PART #:THD0274

POLY CORE COTTON COVER

TEX NUMBER: T-60

COLOR:OLIVE DRAB

DESCRIPTION:THREAD

ADJ:COTTON COVERED/POLY CORE

TEX SIZE:T-60

TICKET SIZE:30

TYPE: I

PLY:3

U/M:YARD

M/L:A-A-50199

Quanti tv !!L!1

6,000,000.000 YD

UNIT PRICE AMOUNT IN US$ PR Number Del.Date

5000027342

TEX SIZE:T-60

TICKET SIZE:30

YARN SIZE:18/2

STRENGTH SINGLE END:7.14 LBS

ELONGATION:24.29%

SHRINKAGE: 1. 00%

LOOP STRENGTH: 9 .28 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:86.9 LBS

CHAIN STITCH SEAM STRENGTH:98.5 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (0 wind): CLOCKWISE

DJU6200007332 PAGE 4 OF 31

SECTiON B

SUPPLiES OR SERViCES AND PRiCES/COSTS

Item No. SUPPLIES OR SERVICES Quantity ~

00004 THD0277 5,000,000.000 YD

CTT,SPR-GRN,3-PLY,#30,AA-50199

UNICOR PART #:THD0277

POLY CORE COTTON COVER

TEX NUMBER: T-60

COLOR:SPRUCE GREEN

DESCRIPTION:THREAD

ADJ:COTTON COVERED/POLY CORE

TEX SIZE:T-60

TICKET SIZE:30

TYPE: 1

PLY:

U/M:YARD

M/L:A-A-50199

UNIT PRICE AMOUNT IN US$ PR Number Del.Date

5000027342

TEX SIZE:T-60

TICKET SIZE:30

YARN SIZE:1B/2

STRENGTH SINGLE END: 7 .14 LBS

ELONGATION:24.29t

SHRINKAGE:1.00t

LOOP STRENGTH:9.2B LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:B6.9 LBS

CHAIN STITCH SEAM STRENGTH:9B.5 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (Q wind): CLOCKWISE

DJU6200007332 PAGE 5 OF 31

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No. SUPPLIES OR SERVICES

00005 THD0282

CTT,WHT,3-PLY,#30,AA-50199

UNICOR PART#:THD0282

POLY CORE COTTON COVER

TEX NUMBER: T-60

COLOR: WHITE

DESCRIPTION:THREAD

ADJ:COTTON COVERED/POLY CORE

TEX SIZE:T-60

TICKET SIZE:30

TYPE: I

PLY:3

U/M:YARD

M/L:A-A-50199

Quanti tv !lL!:!

6,000,000.000 YD

UNIT PRICE AMOUNT IN US$ PR Number Del.Date

5000027342

TEX SIZE:T-60

TICKET SIZE:30

YARN SIZE:18/2

STRENGTH SINGLE END:7.14 LBS

ELONGATION:24.29\

SHRINKAGE: 1.00\

LOOP STRENGTH:9.28 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:86.9 LBS

CHAIN STITCH SEAM STRENGTH:98.5 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (Q wind): CLOCKWISE

DJU6200007332 PAGE 6 OF 31

SUPPLIES OR SERVICES AND PRICES/COSTS

00006 THD0142

Quantity !lL!:!

2,500,000.000 YD

UNIT PRICE AMOUNT IN US$ PR Number Del.Date

5000027342

Item No. SUPPLIES OR SERVICES

A-A-50199,CTT,OVD,50,I,2

UNICOR PART #:THD0142

POLY CORE COTTON COVER##

TEX NUMBER:T-50##

COLOR:OLIVE DRAB, C.A. #66022#

DESCRIPTION:THREAD

ADJ: COTTON COVERED/POLY CORE

TICKET SIZE:MH-40

TYPE: I

PLY:2

U/M:YARD

PROCUREMENT SPEC: A-A-50199

TEX SIZE:T-50

TICKET SIZE:MH-40

YARN SIZE:33/3

STRENGTH SINGLE END:4.56 LBS

ELONGATION: 19.40\

SHRINKAGE: 1. 00\

LOOP STRENGTH: 5.90 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:54.7 LBS

CHAIN STITCH SEAM STRENGTH:62.0 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (Q wind): CLOCKWISE

NEEDLE SIZE METRIC:100

DJU6200007332 PAGE 7 OF 31

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No. SUPPLIES OR SERVICES

00007 THD0275

CTT,KHK,3-PLY,#30,AA-50199

UNICOR PART#:THD0275

POLY CORE COTTON COVER

TEX NUMBER:T-60

COLOR: KHAKI

DESCRIPTION:THREAD

ADJ:COTTON COVERED/POLY CORE

TEX SIZE:T-60

TICKET SIZE:30

TYPE:

PLY:3

U/M:YARD

M/L:A-A-50199

Quantity YL!:i

7,500,000.000 YD

UNIT PRICE AMOUNT IN US$

TEX SIZE:T-60

TICKET SIZE:30

YARN SIZE:18/2

STRENGTH SINGLE END: 7 .14 LBS

ELONGATION:24.29%

SHRINKAGE: 1. 00%

LOOP STRENGTH: 9 .28 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:86.9 LBS

CHAIN STITCH SEAM STRENGTH:98.5 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (Q wind): CLOCKWISE

NEEDLE SIZE METRIC: 110

PR Number

5000027342

Del.Date

DJU6200007332 PAGE 8 OF 31

SUPPLIBS OR SBRVICES AND PRICBS/COSTS

Item No. SUPPLIES OR SERVICES

00008 THD0274

CTT,OD,3-PLY,#30,AA-50199

UNICOR PART #:THD0274

POLY CORE COTTON COVER

TEX NUMBER: T-60

COLOR:OLIVE DRAB

DESCRIPTION:THREAD

ADJ:COTTON COVERED/POLY CORE

TEX SIZE:T-60

TICKET SIZE:30

TYPE:I

PLY:3

U/M:YARD

M/L:A-A-50199

Quantity !:!L!:!

3,000,000.000 YO

UNIT PRICE AMOUNT IN US$ PR Number

5000027342

TEX SIZE:T-60

TICKET SIZE:30

YARN SIZE:18/2

STRENGTH SINGLE END:7.14 LBS

ELONGATION:24.29%

SHRINKAGE: 1. 00%

LOOP STRENGTH:9.28 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:86.9 LBS

CHAIN STITCH SEAM STRENGTH:98.5 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (Q wind): CLOCKWISE

NEEDLE SIZE METRIC: 110

DJU6200007332 PAGE 9 OF 31

SUPPLiBS OR SBRViCES AND PRiCBS/COSTS

Item No. SUPPLIES OR SERVICES Quantity

00009 THD0277 2,500,000.000

CTT,SPR-GRN,3-PLY,#30,AA-50199

UNICOR PART #:THD0277

POLY CORE COTTON COVER

TEX NUMBER: T-60

COLOR:SPRUCE GREEN

DESCRIPTION:THREAD

ADJ:COTTON COVERED/POLY CORE

TEX SIZE:T-60

TICKET SIZE:30

TYPE:1

PLY:

U/M:YARD

M/L:A-A-50199

TEX SIZE:T-60

TICKET SIZE:30

YARN SIZE:18/2

STRENGTH SINGLE END:7.14 LBS

ELONGATION:24.29%

SHRINKAGE: 1. 00%

LOOP STRENGTH:9.28 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:86.9 LBS

CHAIN STITCH SEAM STRENGTH: 98 .5 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (0 wind): CLOCKWISE

NEEDLE SIZE METRIC: 110

YD

UNIT PRICE AMOUNT IN US$ PR Number

5000027342

DJU6200007332 PAGE 10 OF 31

SBCTION B

SUPPLIBS OR SBRVICBS AND PRICBS/COSTS

Item No. SUPPLIES OR SERVICES

00010 THD0282

CTT,WHT,3-PLY,#30,AA-50199

UNICOR PART#:THD0282

POLY CORE COTTON COVER

TEX NUMBER: T-60

COLOR:WHITE

DESCRIPTION:THREAD

ADJ:COTTON COVERED/POLY CORE

TEX SIZE:T-60

TICKET SIZE:30

TYPE:I

PLY:3

U/M:YARD

M/L:A-A-50199

Quantity !!L!:l

3,000,000.000 YO

UNIT PRICE AMOUNT IN US$ PR Number

5000027342

TEX SIZE:T-60

TICKET SIZE:30

YARN SIZE:18/2

STRENGTH SINGLE END: 7 . 14 LBS

ELONGATION:24.29%

SHRINKAGE: 1.00%

LOOP STRENGTH:9.28 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:86.9 LBS

CHAIN STITCH SEAM STRENGTH:98.5 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (0 wind): CLOCKWISE

NEEDLE SIZE METRIC:110

DJU6200007332 PAGE 110F 31

SECT:ION B

SUPPL:IES OR SERV:ICES AND PR:ICES/COSTS

Item No. SUPPLIES OR SERVICES Quantity !!a:!

2,500,000.000 YD

UNIT PRICE AMOUNT IN US$

00011 THD0142

A-A-50l99,CTT,OVD,50,I,2

UNICOR PART #:THD0142

POLY CORE COTTON COVER##

TEX NUMBER:T-50##

COLOR:OLIVE DRAB, C.A. #66022#

DESCRIPTION:THREAD

ADJ:COTTON COVERED/POLY CORE

TICKET SIZE:MH-40

TYPE: I

PLY:2

U/M:YARD

PROCUREMENT SPEC: A-A-50l99

TEX SIZE:T-50

TICKET SIZE:MH-40

YARN SIZE:33/3

STRENGTH SINGLE END:4.56 LBS

ELONGATION:19.40t

SHRINKAGE:l.OOt

LOOP STRENGTH:5.90 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:54.7 LBS

CHAIN STITCH SEAM STRENGTH:62.0 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (0 wind): CLOCKWISE

NEEDLE SIZE METRIC:100

PR Number Del.Date

5000027342

DJU6200007332 PAGE 12 OF 31

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No. SUPPLIES OR SERVICES

00012 THD0275

CTT,KHK,3-PLY,#30,AA-50199

UNICOR PART#:THD0275

POLY CORE COTTON COVER

TEX NUMBER:T-60

COLOR: KHAKI

DESCRIPTION:THREAD

ADJ: COTTON COVERED/POLY CORE

TEX SIZE:T-60

TICKET SIZE: 30

TYPE:

PLY:3

U/M:YARD

M/L:A-A-50199

Quantity ~

7,500,000.000 YO

UNIT PRICE AMOUNT IN US$ PR Number Del.Date

5000027342

TEX SIZE:T-60

TICKET SIZE:30

YARN SIZE:18/2

STRENGTH SINGLE END: 7 .14 LBS

ELONGATION:24.29%

SHRINKAGE: 1. 00%

LOOP STRENGTH: 9 .28 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:86.9 LBS

CHAIN STITCH SEAM STRENGTH: 98 .5 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (0 wind): CLOCKWISE

DJU6200007332 PAGE 13 OF 31

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No. SUPPLIES OR SERVICES

00013 THD0274

CTT,OD,3-PLY,#30,AA-50199

UNICOR PART #:THD0274

POLY CORE COTTON COVER

TEX NUMBER: T-60

COLOR:OLIVE DRAB

DESCRIPTION:THREAD

ADJ:COTTON COVERED/POLY CORE

TEX SIZE:T-60

TICKET SIZE:30

TYPE: I

PLY:3

U/M:YARD

M/L:A-A-50199

Quanti ty !!Lt!

3,000,000.000 YD

UNIT PRICE AMOUNT IN US$ PR Number

5000027342

TEX SIZE:T-60

TICKET SIZE:30

YARN SIZE:18/2

STRENGTH SINGLE END:7.14 LBS

ELONGATION:24.29%

SHRINKAGE: 1. 00%

LOOP STRENGTH:9.28 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH: 86 .9 LBS

CHAIN STITCH SEAM STRENGTH:98.5 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (Q wind): CLOCKWISE

NEEDLE SIZE METRIC:110

DJU6200007332 PAGE 14 OF 31

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No. SUPPLIES OR SERVICES Quantity AMOUNT IN US$UNIT PRICE

00014 THD0277 2,500,000.000

CTT,SPR-GRN,3-PLY,#30,AA-50199

UNICOR PART #:THD0277

POLY CORE COTTON COVER

TEX NUMBER: T-60

COLOR:SPRUCE GREEN

DESCRIPTION:THREAD

ADJ: COTTON COVERED/POLY CORE

TEX SIZE:T-60

TICKET SIZE:30

TYPE: 1

PLY:

U/M:YARD

M/L:A-A-50199

TEX SIZE:T-60

TICKET SIZE:30

YARN SIZE:18/2

STRENGTH SINGLE END: 7 .14 LBS

ELONGATION:24.29t

SHRINKAGE:1.00t

LOOP STRENGTH:9.28 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:86.9 LBS

CHAIN STITCH SEAM STRENGTH:98.5 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (0 wind): CLOCKWISE

NEEDLE SIZE METRIC:110

PR Number

5000027342

DJU6200007332 PAGE 15 OF 31

SUPPLiES OR SERViCES AND PRiCES/COSTS

Item No. SUPPLIES OR SERVICES

00015 THD0282

CTT,WHT,3-PLY,#30,AA-50199

UNICOR PART#:THD0282

POLY CORE COTTON COVER

TEX NUMBER: T-60

COLOR: WHITE

DESCRIPTION:THREAD

ADJ:COTTON COVERED/POLY CORE

TEX SIZE:T-60

TICKET SIZE:30

TYPE: I

PLY:3

U/M:YARD

M/L:A-A-50199

Quanti tv !lL!1

3,000,000.000 YD

UNIT PRICE AMOUNT IN US$ PR Number Del. Date

5000027342

TEX SIZE:T-60

TICKET SIZE: 30

YARN SIZE:18/2

STRENGTH SINGLE END:7.14 LBS

ELONGATION:24.29%

SHRINKAGE: 1. 00%

LOOP STRENGTH: 9 .28 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:86.9 LBS

CHAIN STITCH SEAM STRENGTH:98.5 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (0 wind): CLOCKWISE

NEEDLE SIZE METRIC: 110

DJU6200007332 PAGE 16 OF 31

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No. SUPPLIES OR SERVICES Quantity

20,000,000.00000016 THD0142

A-A-50199,CTT,OVD,50,I,2

UNICOR PART #:THD0142

POLY CORE COTTON COVER##

TEX NUMBER:T-50##

COLOR:OLIVE DRAB, C.A. #66022#

DESCRIPTION:THREAD

ADJ: COTTON COVERED/POLY CORE

TICKET SIZE:MH-40

TYPE: I

PLY:2

U/M:YARD

PROCUREMENT SPEC: A-A-50199

TEX SIZE:T-50

TICKET SIZE:MH-40

YARN SIZE:33/3

STRENGTH SINGLE END:4.56 LBS

ELONGATION: 19.40%

SHRINKAGE: 1. 00%

LOOP STRENGTH: 5 .90 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:54.7 LBS

CHAIN STITCH SEAM STRENGTH:62.0 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (0 wind): CLOCKWISE

NEEDLE SIZE METRIC:100

!W:!

YD

UNIT PRICE AMOUNT IN US$ PR Number

5000027342

DJU6200007332 PAGE 17 OF 31

SUPPLIES OR SERVICES AND PRICES/COSTS

Quantity ~

10,000,000.000 YD

UNIT PRICE AMOUNT IN US$Item No. SUPPLIES OR SERVICES

00017 THD0142

A-A-50199,CTT,OVD,50,I,2

UNICOR PART #:THD0142

POLY CORE COTTON COVER##

TEX NUMBER:T-50##

COLOR:OLIVE DRAB, C.A. #66022#

DESCRIPTION:THREAD

ADJ:COTTON COVERED/POLY CORE

TICKET SIZE:MH-40

TYPE: I

PLY:2

U/M:YARD

PROCUREMENT SPEC: A-A-50199

TEX SIZE:T-50

TICKET SIZE:MH-40

YARN SIZE:33/3

STRENGTH SINGLE END:4.56 LBS

ELONGATION: 19.40%

SHRINKAGE: 1. 00%

LOOP STRENGTH:5.90 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:54.7 LBS

CHAIN STITCH SEAM STRENGTH:62.0 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (Q wind): CLOCKWISE

NEEDLE SIZE METRIC: 100

PR Number

5000027342

DJU6200007332 PAGE 18 OF 31

SBCTION B

SUPPLIBS OR SBRVICBS AND PRICBS/COSTS

Item No. SUPPLIES OR SERVICES Quantity ~

00018 THD0142 10,000,000.000 YD

A-A-50199,CTT,OVD,50,I,2

UNICOR PART #:THD0142

POLY CORE COTTON COVER##

TEX NUMBER:T-50##

COLOR:OLIVE DRAB, C.A. #66022#

DESCRIPTION:THREAD

ADJ:COTTON COVERED/POLY CORE

TICKET SIZE:MH-40

TYPE: I

PLY:2

U/M:YARD

PROCUREMENT SPEC: A-A-50199

AMOUNT IN US$ PR Number Del.Date

5000027342

UNIT PRICE

TEX SIZE:T-50

TICKET SIZE:MH-40

YARN SIZE:33/3

STRENGTH SINGLE END: 4 .56 LBS

ELONGATION: 19.40%

SHRINKAGE: 1. 00%

LOOP STRENGTH:5.90 LBS

MELTING POINT:

LOCK STITCH SEAM STRENGTH:54.7 LBS

CHAIN STITCH SEAM STRENGTH:62.0 LBS

TWIST DIRECTION (Z twist): LEFT (Z)

MIN TWIST PER INCH:20

SPOOL OFF DIRECTION (Q wind): CLOCKWISE

NEEDLE SIZE METRIC:100

DJU6200007332 PAGE 19 OF 31

This is a solicitation for commercial items prepared in accordance with the format in Subpart 12.3, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is CT2004-10. The solicitation is issued as a Request for Proposal (RFP). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-38. The North American Industry Classification

System (NAIC) code is 313113 (Thread Mills) and small business size standard is 500. This acquisition is set aside

100% for small business. UNICOR, Federal Prison Industries, Inc. intends to enter into a firm-fixed price, Requirements type contract for delivery to the following two UNICOR facilities: FCI Ray Brook, NY 12977 and FCI

Oakdale, LA 71463. The period of performance shall be two (2) years from date of award with two (2) Options, if exercised. The product is a commercial item, thread, used to manufacture inmate clothing. Finished goods are for sale to the Federal Bureau of Prisons and other Federal Agencies. Complete descriptions of the items are found in Section

B Supplies or Services and Prices/Costs.

A Certificate of Conformance (COC) is required for each certify that supplies delivered meet the specifications and conditions of the contract.

Delivery Order. A COC must be furnished with each delivery to stated in the contract and are in conformance with all terms

The total estimated contract quantities for the line items are also shown in Section B.

The DELIVERY ORDER MINIMUM Quantity is 600,000 yds per line item and the DELIVERY ORDER MAXIMUM Quantity is 6,000,000 yds per line item. Delivery shall be FOB Destination.

DELIVERY SHALL BE 45 DAYS AFTER RECEIPT OF DELIVERY ORDER (ARO).

Federal Prison Industries intends to award one (1) contract for this acquisition. However, a multiple award is possible if it is determined to be the best value award for the government.

The offer period for this acquisition is 60 days. Offerors agree to hold firm all price offers for 60 days from offer due date.

Price evaluation will be based on the sum of the total extended price of the line items.

ADDITIONAL INFORMATION pertaining to this solicitation:

The contractor will ship via FOB Destination. Delivery shall be no later than 45 days ARO. Orders delivery dates will ship in time to ensure delivery by the requested date no earlier than 45 days is not acceptable unless requested/authorized by the contracting officer. Early deliveries may be contractor at contractor's expense.

with multiple

ARO. Early delivery returned to the

Specification A-A50199A dated 7/31/2006 for thread, polyester core, cotton or polyester-covered applies to this acquisition.

This requirement is not domestic U.S.A. only. However, FAR 52-225-5, Trade Agreements (AUG 2009) is applicable.

Designated countries only can be a source of non U.S.A. material. See the Trade Agreements clause for a listing of designated countries.

Non-manufacturer rule applies. A recipient of a contract set aside for small business, other than the actual manufacturer or processor, must provide the products of a small business (500 or less employee size standard for NAICS code 313113) .

DJU6200007332 PAGE 20 OF 31

********STATEMENT OF WORK/DESCRIPTION********

See Section B for the Line Item Description and Estimated Quantity.

52.252-1, Solicitation provisions Incorporated by Reference (2/98)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text.

52.252-2, Clauses Incorporated

This contract incorporates one full text. The full text of a by Reference (2/98) or more clauses by reference, with the same force and effect as if they were given in clause may be accessed electronically at: www.acqnet.gov/far

The following FAR clauses and provisions apply to this acquisition:

52.204-4, Printed or Copied Double-Sided on Recycled Paper;

52.211-2, Availability of Specifications, Standards, & Data Item Descriptions Listed in the Acquisition Streamlining &

Standardization Information System (ASSIST)

52.211-16, Variation in Quantity, The permissible variation shall be +10\ and -10\

52.211-17, Delivery of Excess Quantities;

52.212-1, Instructions to Offerors- Commercial Items (JON 2008);

52.212-2, Evaluation-Commercial Items. Evaluation factors are: overall score on sew trials conducted with thread samples submitted, past performance, ability to conform to the specifications and price. Past performance is significantly more important than cost or price. Past performance would include capability to provide like or similar supplies that meet quantity and delivery requirements of this acquisition. The Government may make an award without discussions - therefore, the initial offer should contain the offeror's best pricing. Tradeoff Process: It may be in the Government's best interest to consider award to other than the lowest priced offeror or other than the highest rated technical offeror. This process may include tradeoffs among cost/price and non-cost factors and allows the

Government to accept other than the lowest priced proposal if the perceived benefits of the highest priced proposal are determined to merit the additional cost.

52.212-3 Offeror Representations and Certifications-Commercial Items (AUG 2009)

An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (c) through (m) of this provision.

52.212-4 Contract Terms and Conditions-Commercial Items (MAR 2009)

DEVIATION (d)

DJU6200007332 PAGE 21 OF 31

"This contract is not subject to the Contract Disputes Act of 1978, as amended (41 U.S.C. 601-613). Disputes arising under or relating to this contract shall be resolved in accordance with clause FAR 52.233-1 Disputes (JUL 2002)

(DEVIATION), which is incorporated herein by reference. The contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract."

To view the full text clause FAR 52.233-1 Disputes (JUL 2002) (DEVIATION), go to http://www.unicor.gov/fpi_contracting.

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items.

As prescribed in 12.301(b) (4), insert the following clause:

Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Apr 2010)

(a) The Contractor shall comply with the following Federal Acquisition incorporated in this contract by reference, to implement provisions of acquisitions of commercial items:

Regulation (FAR) clauses, which are law or Executive orders applicable to

(1) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)).

___Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)).

(2) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Pub. L. 108-77, 108-78).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.] x_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41

U.S.C. 253g and 10 U.S.C. 2402).

(2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41

U.S.C. 251 note)).

(3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (MAR 2009)

(Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

(4) 52.204-11, American Recovery and Reinvestment Act-Reporting Requirements (Mar 2009) (Pub. L. 111-5).

(5) 52.219-3, Notice of Total HUB Zone Set-Aside (Jan 1999) (15 U.S.C. 657a).

_x_ (6) 52.219-4, Notice of Price Evaluation Preference for HUB Zone Small Business Concerns (July 2005) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

(7) [Reserved]

_x_ (8) (i) 52.219-6, Notice of Total Small Business Set-Aside (June 2003) (15 U.S.C. 644).

DJU6200007332 PAGE 22 OF 31

(ii) Alternate I (Oct 1995) of 52.219-6.

(iii) Alternate II (Mar 2004) of 52.219-6.

(9) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

(ii) Alternate I (Oct 1995) of 52.219-7.

(iii) Alternate II (Mar 2004) of 52.219-7.

_x_ (10) 52.219-8, Utilization of Small Business Concerns (May 2004) (15 U.S.C. 637(d) (2) and (3».

x (11) (i) 52.219-9, Small Business Subcontracting Plan (Apr 2008) (15 U.S.C. 637(d) (4».

(ii) Alternate I (Oct 2001) of 52.219-9.

(iii) Alternate II (Oct 2001) of 52.219-9.

(12) 52.219-14, Limitations on Subcontracting (Dee 1996) (15 U.S.C. 637(a) (14».

_x_ (13) 52.219-16, Liquidated Damages-Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d) (4) (F) (i».

(14) (i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (Oct 2008) (10

U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer) .

(ii) Alternate I (June 2003) of 52.219-23.

(15) 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting (Apr 2008)

(Pub. L. 103-355, section 7102, and 10 U.S.C. 2323).

(16) 52.219-26, Small Disadvantaged Business Participation program- Incentive Subcontracting (Oct 2000) (Pub. L.

103-355, section 7102, and 10 U.S.C. 2323).

(17) 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (May 2004) (15 U.S.C. 657 f).

_x_ (18) 52.219-28, Post Award Small Business Program Rerepresentation (Apr 2009) (15 U.S.C. 632(a) (2».

(19) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

x (20) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Aug 2009) (E.O. 13126).

x (21) 52.222-21, Prohibition of Segregated Facilities (Feb 1999).

x (22) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).

x_ (23) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible

Veterans (Sept 2006) (38 U.S.C. 4212).

_x_ (24) 52.222-36, Affirmative Action for Workers with Disabilities (Jun 1998) (29 U.S.C. 793).

DJU6200007332 PAGE 23 OF 31

_x_ (25) 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible

Veterans (Sept 2006) (38 U.S.C. 4212).

__ (26) 52.222-54, Employment Eligibility Verification (Jan 2009). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in

22.1803.)

(27) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42

U.S.C. 6962(c) (3) (A) (ii». (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i) (2) (C». (Not applicable to the acquisition of commercially available off-the-shelf items.)

(28) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

(29) (i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products (Dec 2007)

(E.O. 13423).

(ii) Alternate I (Dec 2007) of 52.223-16.

(30) 52.225-1, Buy American Act-Supplies (Feb 2009) (41 U.S.C. 10a-10d).

(31) (i) 52.225-3, Buy American Act-Free Trade Agreements-Israeli Trade Act (June 2009) (41 U.S.C.

U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, Pub. L. 108-77, 108-78, 108-286, 108-302, 109-283, and 110-138) .

10a-10d, 19

109-53, 109-169,

(ii) Alternate I (Jan 2004) of 52.225-3.

(iii) Alternate II (Jan 2004) of 52.225-3.

_x_ (32) 52.225-5, Trade Agreements (Aug 2009) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

_x_ (33) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O. 's, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury) .

(34) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

(35) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

(36) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 255(f), 10 U.S.C.

2307 (f» .

(37) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)).

_x_ (38) 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (Oct 2003) (31 U.S.C. 3332).

(39) 52.232-34, Payment by Electronic Funds Transfer-Other than Central Contractor Registration (May 1999) (31

U.S.C. 3332).

(40) 52.232-36, Payment by Third Party (Feb 2010) (31 U.S.C. 3332).

DJU6200007332 PAGE 24 OF 31

(41) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

(42) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

(ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall the Contracting Officer law or Executive orders comply with the FAR clauses in this paragraph (c), applicable to has indicated as being incorporated in this contract by reference applicable to acquisitions of commercial items:

commercial services, that to implement provisions of

[Contracting Officer check as appropriate.]

(1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.).

(2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.) .

(3) 52.222-43, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Multiple Year and Option

Contracts) (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.).

(4) 52.222-44, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Sep 2009) (29 U.S.C. 206 and 41

U.S.C. 351, et seq.).

(5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or

Repair of Certain Equipment-Requirements (Nov 2007) (41 351, et seq.).

(6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain

Services-Requirements (Feb 2009) (41 U.S.C. 351, et seq.).

(7) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247).

(8) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p) (1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

DJU6200007332 PAGE 25 OF 31

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the

Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41

U.S.C. 251 note».

(ii) 52.219-8, Utilization of Small Business Concerns (May 2004) (15 U.S.C. 637(d) (2) and (3», in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $550,000 ($1,000,000 for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) [Reserved]

(iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).

(v) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible

Veterans (Sept 2006) (38 U.S.C. 4212).

(vi) 52.222-36, Affirmative Action for Workers with Disabilities (June 1998) (29 U.S.C. 793).

(vii) [Reserved]

(viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.).

(ix) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g».

___Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g».

(x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or

Repair of Certain Equipment-Requirements (Nov 2007) (41 U.S.C. 351, et seq.).

(xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements

(Feb 2009) (41 U.S.C. 351, et seq.).

(xii) 52.222-54, Employment Eligibility Verification (Jan 2009).

(xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and

10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

DJU6200007332 PAGE 26 OF 31

(End of clause)

52.214-20, Bid Samples (APR 2002);

THREAD SAMPLE REQUIREMENT:

In order to insure the performance of all future thread purchases, UNICOR will perform sew trials on all solicited threads. Thread samples are required to perform the sew trials and are a consideration for contract award. Should your samples not be submitted or not received at the appropriate location, your offer will no longer be considered.

Each vendor must submit a two (2) cone sample of each thread type listed in the solicitation (4 thread items) to be received no later than July 16, 2010 at 2:00 PM ET. All samples shall be sent to the attention of Dean Peterson, Factory Manager/UNICOR, FCI Ray Brook, Old Ray Brook Road Ray Brook, NY 12977 phone number 518-897-4198. All thread samples submitted shall have marked on the outside of the package "SAMPLE", along with the solicitation number and

UNICOR part number (example: THD0142). A certificate of conformance shall be included with the sample which indicates the thread conforms to the line item description contained in the solicitation. There are no exemptions from offering a sample.

SEW TRIAL PROCEDURE:

1.Equipment: Single Needle Lock Stitch (301 Stitch), with reverse capabilities. Machine speed shall be 3500 revolutions per minute and 10 to 12 stitches per inch.

2. Trial Material: three test squares 12" x 12", production material, each test square will consist of three plies of material.

3. Process: The equipment is threaded and adjusted with the trial thread. The person performing the thread trial will sew forward across the test square to within ~" of the end of the test square. The tester will then reverse the machine and sew in reverse back across the test square to within ~" of the end of the test square. This will be repeated 10 times on each test square. A completed test square will have 20 rows of stitches when complete. Attempt to spread the stitching evenly across the test square. Each row of stitches will be sewn at "full" RPM of 3500. The tester will perform this test on each of the three test squares. When beginning the second and third test squares please switch to a new spool of thread each time from the lot being tested. The number of thread breaks or thread failures will be recorded.

4. Scoring: The number of thread failures will be totaled and divided by three. This number will be subtracted from 10 to determine the score for the trial. Any score less than 8.5 will be rejected.

(End of sew trial procedure)

52.215-6 Place of Performance (OCT 1997);

(a) The offeror or respondent, in the performance of any contract resulting from this solicitation, ___ intends, ___ does not intend [check applicable] to use one or more plants or facilities located at a different address from the address of the offeror or respondent as indicated in this proposal or response to request for information.

(b) If the offeror or respondent checks "intends" in paragraph (a) of this provision, it shall insert in the following spaces the required information:

PLACE OF PERFORMANCE (STREET ADDRESS, CITY, STATE, COUNTY, ZIP CODE)

THE PLANT OR FACILITY IF OTHER THAN OFFEROR OR RESPONDENT

NAME AND ADDRESS OF OWNER AND OPERATOR OF

DJU6200007332 PAGE 27 OF 31

(End of provision)

52.216-18, Ordering, Orders may be issued under the resulting contract from the date of award through four (4) years.

52.216-19, Order Limitations;

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than 600,000 yds the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor (1) Any delivery order in excess of 6,000,000 yds (2) order for a combination of items in excess of N.A. or (3) A series of orders from the same ordering office within days that together call for quantities exceeding the limitation in subparagraph (b) (1) or (2) of this section.

Any

(c) If this is a requirements contract (i.e., includes the Requirements

Acquisition Regulation (FAR), the Government is not required to order a

Contractor if that requirement exceeds the maximum-order limitations in clause at subsection 52.216-21 of the Federal part of anyone requirement from the paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 5 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

52.216-21, Requirements (Oct 1995);

52.223-11, Ozone Depleting Substances;

52.246-15, Certificate of Conformance (Apr 1984);

52.217-9, Option to Extend the Term of the Contract (MAR 2000);

52.247-34, F.O.B. Destination (Nov 1991);

JAR 2852.201-70 Contracting Officer's Technical Representative (COTR).

As prescribed in Subpart 2801.70, insert the following clause:

Contracting Officer's Technical Representative (COTR)

(JAN 1985)

(a) COTR to be determined, phone N.A. is hereby designated to act as Contracting Officer's Technical Representative

(COTR) under this contract.

(b) The COTR is responsible, as applicable, for: receiving all deliverables, inspecting and accepting the supplies or services provided hereunder in accordance with the terms and conditions of this contract; providing direction to the contractor which clarifies the contract effort, fills in details or otherwise serves to accomplish the contractual

Scope of Work; evaluating performance; and certifying all invoices/vouchers for acceptance of the supplies or services furnished for payment.

(c) The COTR does not have the authority to alter the contractor's obligations under the contract, and/or modify any of the expressed terms, conditions, specifications, or cost of the agreement. If as a result of technical discussions

DJU6200007332 PAGE 28 OF 31

it is desirable to alter/change contractual obligations or the Scope of Work, the Contracting Officer shall issue such changes.

(End of Clause)

The factory point of contact at Ray Brook, NY is Dean Peterson, factory manager at 518-897-4198 until such time a COTR is appointed.

The factory point of contact at Oakdale, LA is Tammy Perkins, factory manager at 318-215-2871.

FPI 1000D, Packaging and Marking - Preservation,packaging,and markingfor all itemscoveredby this contractshall be in accordance with commercial practice and adequate to insure acceptance by common carrier and safe arrival at destination. The contract number should be on or adjacent to the exterior shipping label. Each package received must be marked for type and quantity. A Certificate of Conformance must accompany each shipment.

All shipments should be labeled as follows:

a. Vendor name

b. Purchase Order number and/or Contract number

c. Item description

d. Item quantity and weight

e. Other pertinent information for this acquisition

FPI 1000F1, Delivery Order -Orders shall customarilybe made by phone, with subsequentwrittenconfirmation containing the following information:

a. Date of order

b. Contract number and order number

c. Item number and description, quantity, and unit price

d. Delivery or performance date

e. Place of delivery

f. Shipping instructions

g. Accounting data

h. Any other pertinent information

Delivery shall be 45 days after receipt of delivery order (ARO).

FPI 1000F2 TIME OF DELIVERY/DELIVERY SCHEDULE, Supplement: LCL APPR

16.505(a) and the clause located in FAR 52.216-18 entitled Ordering and included in Section I, of this contract, any supplies and/or services to be furnished under this contract shall be ordered by issuance of delivery orders by individuals listed below: all authorized personnel excluding the COTR.

DELIVERY HOURS: Normal delivery hours are as follows: 7:30 am to 11:00 am & 12 Noon to 2:30 pm Monday through Friday, notwithstanding emergencies and Federal holidays. The delivery location may require an appointment in advance. Special instructions may be indicated on the purchase/delivery order as delivery hours may vary from facility to facility.

FPI 1000HI ECONOMIC PRICE ADJUSTMENT, Supplement: LCL APPR

Twelve (12) months after contract award date, contract prices for the succeeding twelve (12) month period may be adjusted in accordance with the change in the Producer Price Index for NAICS 313113 (thread mills) from the date of award to the date of adjustment. IT IS THE CONTRACTOR'S RESPONSIBILITY TO REQUEST THIS ADJUSTMENT.

DJU6200007332 PAGE 29 OF 31

Adjustments may be requested for a period not to exceed 30 days after the eligible adjustment date. Requests that are made after the 30-day limit will not be honored and the contract pricing will not be adjusted. The contractor shall submit any requests for adjustments in writing to the contracting officer. Requests shall include a copy of the relevant index and must be within the allowed time period for adjustment. Any adjustments authorized as a result of the adjustment request will not be retroactive. The date the completed request is received by the contracting officer will be the effective date of any changes in price.

The contractor also is required to request downward price adjustments. All downward adjustments will be retroactive to the authorized adjustment date as specified in this clause. If downward price adjustments are not requested and this is later revealed through audits or otherwise, the contractor shall reimburse the Government the amount overcharged plus interest. Interest will be computed at the rate set annually by the Secretary of the Treasury for late contract payments. Interest will accrue from the date the adjustment should have been made.

In computing any contract price adjustment, the most recently published index as of the date of award will be compared to the most recently published index as of the date of adjustment. No adjustment shall be made if the referenced change is less than 2%. Total upward adjustment for the contract period, including any option periods, shall not exceed Ten Percent (10%), based on the original or option period contract price; downward adjustments are not limited.

Indices are available from the Bureau of Labor Statistics, 2 Massachusetts Ave. NE, Washington, DC 20212, telephone

202-691-7705 or www.bls.gov

FPI 1000K2, SUBCONTRACT CERTIFICATION, This contract does ( ) does not ( ) provide for any subcontracting possibilities. If answer is in the affirmative, offeror will submit a subcontracting plan in accordance with the requirements of FAR 52.219-9, FPR Temp. Reg. SO;

FPI 999.999-9 Business Management Questionnaire- This must be completed and provided with your offer. This is very important as it provides your past performance for LIKE OR SIMILAR items and capability to perform the requirement.

Ensure the point of contact information on the form is correct and current. The document can be downloaded at the following website: http://www.unicor.gov/fpi_contracting/vendors/

The ACH Vendor Payment Enrollment Form is also available at this same website.

FUTURE REQUIREMENTS for this or similar items for the Ray Brook factory or other FPI/UNICOR factories may be added to the resulting contract(s) if considered to fall within the scope of work and the price is determined to be fair and reasonable.

PROPOSAL SUBMISSION REQUIREMENTS: Each proposal package shall consist of the

(1) Standard Form 1449 Solicitation/Contract/Order for Commercial Items with

(2) All Amendments issued,

(3) Three (3) Business Management Questionnaires for contracts that are for SIMILAR OR LIKE ITEMS (this is your capability and past performance information) and (4) an ACH form (Vendor Payment/Enrollment Form). A completed ACH form must be on file prior to contract award. (5) Offeror Representations and Certifications- Commercial Items (AUG

2009) must be submitted with your proposal, FAR 52.212-3 is the clause that contains the Representations &

Certifications and is contained in this solicitation. You can also complete representations & certifications online at https://orca.bpn.gov (6) An e-mail address for the offeror's point of contact individual for this solicitation. ***Bid samples are to be sent separately to Ray Brook. See Bid Samples clause*** following completed and signed documents:

the Section B pages for price submission

This solicitation is available online at www.fedbizopps.gov

For reference, all FAR clauses can be found online at www.acquisition.gov/far

DJU6200007332 PAGE 30 OF 31

Central Contractor Registration is mandated effective 10/01/03. ALL CONTRACTORS MUST REGISTER in the CCR prior to award. For additional information and to register go to www.ccr.gov.

Federal Prison Industries uses the Contractor Performance System for contractor evaluation. This contract requires the awardee to register in the CPS system at https://cpscontractor.nih.gov/cr.asp

All offers are due by July 16, 2010 2:00 PM Eastern Time (ET) to the attention of Ben Hanson, Contract Specialist, UNICOR FCI Terre Haute, 4200 Bureau Road North, Terre Haute, IN, 47802. Offer must indicate Solicitation No.

CT2004-10, name, address and telephone number of offeror. Facsimiles will not be accepted. Electronic submissions will not be accepted. Commercial delivery service is advised.

All offerors that fail to furnish required Representations and Certifications information or reject the terms and conditions of the solicitation may be excluded from consideration. Any amendments hereby issued to this solicitation must be acknowledged by each offeror. Offers or modifications must be received by the date and time specified or they shall not be considered for an award.

Questions regarding this solicitation may be addressed in writing to Ben Hanson, Contract Specialist, at the following e-mail address: bhanson@central.unicor.gov or phone 812-238-3351.

DJU6200007332 PAGE 31 OF 31