CSSFA813925Q0014.pdf

Combined Synopsis/Solicitation

(IAW FAR 12.603)

Solicitation Number: FA813925Q0014 HMHS EXLRT Automated Loop & Joint Tester Kit

This is a combined synopsis/solicitation for commercial items prepared in accordance with the formats in Subpart 12.6 and Subpart 13.5, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

This solicitation is being issued as Request for Quote (RFQ) IAW FAR Part 13.

The Air Force Sustainment Center (AF SC/PZIMB) at Tinker Air Force Base Oklahoma, intends to award a Sole Source, Firm- Fixed-Price contract for the acquisition of the commodity listed below.

CLIN # Description Quantity Unit of

I Period of Performance

0001 ExLRt Automated Loop & Joint Tester Kit (PN XLR-9703-

01) 4 EA 90 Days ARO

0002 Calibration Kit (PN: BLR-0323) 2 EA 90 Days ARO

0003 PC Calibration Software/Training 1 EA 90 Days ARO

“Notice to Vendor(s)/Supplier(s): The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse a vendor for any costs.”

Vendor is required to “wet” sign/date and fill in the vendor information, pricing on page 2, complete the CLIN Unit Pricing on page 3. Please return 1 signed copy to the issuing office.

Quotation Submission Information:

Quotations are due by 8 July 2025, 2:30 PM, Tinker AFB OK Central Daylight Time (CDT). Contact the following individual for information regarding this solicitation:

NOTE: Emailed quotations are preferred Michael Chappell Contracting Specialist michael.chappell.7@us.af.mil Phone:

EVALUATION OF RESPONSES:

Award will be conducted and evaluated under the provisions of FAR Part 12 Commercial Items and FAR Part 13, Simplified Acquisition Procedures.

The responsible vendors must be registered in the System for Award Management (SAM) database (available at:

https://sam.gov/content/home. Lack of registration in SAM will qualify the contractor as ineligible for award.

Contract award will be made to the vendor who is technically acceptable with the lowest evaluated price.

mailto:michael.chappell.7@us.af.mil

REQUISITION NUMBER:

F3YCCA5174A001

SOLICITATION NUMBER

FA813925Q0014

SOLICITATION ISSUE DATE:

1 July 2025

SOLICITATION DUE DATE:

8 July 2025

THIS ACQUISITION IS:

Full and Open Competition

100% Small Business Set Aside

Sole Source

SIZE STD:

750 Employees

FEDERAL SUPPLY CLASS:

NAICS:

334515

DELIVERY:

SEE ITEM DESC

FOB DESTINATION X

FOB ORIGIN

DPAS RATING:

METHOD OF

SOLICITATION:

REQUEST FOR QUOTE

1. VENDOR INFORMATION

BUSINESS NAME:

STREET ADDRESS: CITY, STATE, ZIP:

CAGE CODE and DUNS:

BUSINESS WEB ADDRESS:

CONTACT PERSON:

TELEPHONE: FAX:

E-MAIL:

2. Pricing Information and Certification of Response

Total Proposed Unit Price: Proposed Delivery Date:

Vendor’s Authorized Representative's Signature Date

Type or Print Name Position or Title

Vendor is Required to fill-in pages mentioned on Page 1. Please “wet” sign page 2 of this solicitation and return 1 copy to issuing office. Vendor agrees to furnish and deliver all items set forth or otherwise identified above and on any additional sheets subject to the terms and conditions specified herein.

X

Supplies or Services & Prices or Costs Additional Information/Notes

Item Supplies / Services Quantity Unit Unit Price Amount

ExLRt Automated Loop & Joint Tester Kit (PN XLR-9703-01)

Manufacturer's Part Number: XLR-9703-01 Product Service Code: 6625 Pricing Arrangement: Firm Fixed Price

4 Each

Calibration Kit (PN: BLR-0323)

Manufacturer's Part Number: BLR-0323 Product Service Code: 6625 Pricing Arrangement: Firm Fixed Price

2 Each

PC Calibration Software/Training

Commodity Name: Calibration Software/Training Product Service Code: 6625 Pricing Arrangement: Firm Fixed Price

1 Each

Description/Specifications/Statement of Work

Requirements Four (4) HMHS-EXLRT Automated Loop and Tester Kits.

Packaging and Marking

Inspection and Acceptance Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: Please contact POC for inspection and acceptance instructions. The organization located at the address for F3YCCA is responsible for inspection and acceptance. Please see the 252.232-7006 Wide Area WorkFlow Payment Instructions Routing Data Table as incorporated in this document.

DoDAAC: F3YCCA CountryCode: USA

F3YCCA 76 SMXG MXDS

AF BPN NO MLSBLS PROC CP4055821120, 7532 JOINT STAR DR BLDG 9001

TINKER AFB, OK 73145-3312

UNITED STATES

Stacie Glover Email: stacie.glover@us.af.mil Telephone: 8015867632

Inspection and Acceptance Location

Both Destination Instructions: Please contact POC for inspection and acceptance instructions. The organization located at the address for F3YCCA is responsible for inspection and acceptance. Please see the 252.232-7006 Wide Area WorkFlow Payment Instructions Routing Data Table as incorporated in this document.

DoDAAC: F3YCCA CountryCode: USA

F3YCCA 76 SMXG MXDS

AF BPN NO MLSBLS PROC CP4055821120, 7532 JOINT STAR DR BLDG 9001

TINKER AFB, OK 73145-3312

UNITED STATES

Stacie Glover Email: stacie.glover@us.af.mil Telephone: 8015867632

Inspection and Acceptance Location

Both Destination Instructions: Please contact POC for inspection and acceptance instructions. The organization located at the address for F3YCCA is responsible for inspection and acceptance. Please see the 252.232-7006 Wide Area WorkFlow Payment Instructions Routing Data Table as incorporated in this document.

DoDAAC: F3YCCA CountryCode: USA

F3YCCA 76 SMXG MXDS

AF BPN NO MLSBLS PROC CP4055821120, 7532 JOINT STAR DR BLDG 9001

TINKER AFB, OK 73145-3312

UNITED STATES

Stacie Glover Email: stacie.glover@us.af.mil Telephone: 8015867632

Deliveries or Performance

Deliveries or Performance

IMPORTANT DELIVERY INFORMATION

TRUCKGATE ENTRY

*TAFB Truck Gate" address: 7000 SE 59thStreet Oklahoma City, Oklahoma73145

The Truck Gate is for ALL commercial vehicle entry and is located on SE 59thStreet, east of S Air Depot Blvd (southwest corner of the base). Trucks will not be allowed to gain access through any other gate.

a. The Truck Gate's normal operating hours are Monday through Friday 0600-1600hrs (6:00 AM - 4:00 PM) and is closed on weekends and federal holidays (New Year's Day, Martin Luther King, Jr. Day, President's Day, Memorial Day, Juneteenth, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving

Day, Christmas Day).

ONLY mission critical/mission essential commercial vehicle traffic will be allowed entry to the base when the Truck Gate is closed (after hours).

-In order to expedite the delivery process please provide dispatch with the contract number and ask dispatch to provide this same information to the truckdriver.

Example:"FA8125, FA8132, FA8136, FA8126, FA8101 followed by 7 more characters.

-DRIVERS MUST CALL THE COMMODITY HOTLINE (405)582-5485 PRIOR TO ENTRY FORESCORT TO APPROPRORIATE DELIVERY LOCATION.

-SAFETY: Be advised that an OFFLOAD RAMP MAYNOT BE AVAILABLE. Please plan accordingly.

-Under authority of 50 USC 797; 18 USC 930; and 32 CFR 809A3 - It is illegal to enter Tinker AFB with firearms, ammunition or any weapons, you will be denied access to the base and your vehicle will be subject to impoundment.

-Any violation of this prohibition will result in criminal prosecution under applicable federal laws and regulations.

-All personnel and vehicles entering the base are subject to search.

-All commercial vehicles entering the base will be searched for explosives and contraband.

-Security Forces will confiscate all firearms, ammunition and weapons and they WILL NOT be returned.

DELIVERIESTO BUILDING 3001 (B / 3001)

-Delivery vehicles are prohibited from using "Staff Drive" - located directly east of Building 3001

-Delivery vehicles may make deliveries only in designated unloading areas

INSURANCE

The following insurance amounts are required by FAR Clause 52.228-5 - Insurance Work on A Government Installation that is incorporated in full text in this solicitation.

(a)Workers' compensation and employer's liability. Contractors are required to comply with applicable Federal and State workers' compensation and occupational disease statutes. If occupational diseases are not compensable under those statutes, they shall be covered under the employer's liability section of the insurance policy, except when contract operations are so commingled with a contractor's commercial operations that it would not be practical to require this coverage.

Employer's liability coverage of at least $100,000 shall be required, except in

States with exclusive or monopolistic funds that do not permit workers' compensation to be written by private carriers. (See 28.305(c) for treatment of contracts subject to the Defense Base Act.)

(b)General liability.

(1) The contracting officer shall require bodily injury liability insurance coverage written on the comprehensive form of policy of at least $500,000 per occurrence.

(2) Property damage liability insurance shall be required only in special circumstances as determined by the agency.

(c)Automobile liability. The contracting officer shall require automobile liability insurance written on the comprehensive form of policy. The policy shall provide for bodily injury and property damage liability covering the operation of all automobiles used in connection with performing the contract. Policies covering automobiles operated in the United States shall provide coverage of at least $200,000 per person and$500,000 per occurrence for bodily injury and $20,000 per occurrence for property damage. The amount of liability coverage on other policies shall be commensurate with any legal requirements of the locality and sufficient to meet normal and customary claims.

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery Schedule From date of lead time event to date of latest delivery 90 Calendar Days Date of Award Receipt

4 Each Ship To DoDAAC: F3YCCA CountryCode: USA

F3YCCA 76 SMXG MXDS

AF BPN NO MLSBLS PROC CP4055821120, 7532

JOINT STAR DR BLDG 9001

TINKER AFB, OK 73145-3312

UNITED STATES

Derrick Anderson Email: derrick.anderson.1@us.af.mil Telephone: 4055829521

FoB Details Contractor Destination

Delivery Schedule From date of lead time event to date of latest delivery 90 Calendar Days Date of Award Receipt

2 Each Ship To DoDAAC: F3YCCA CountryCode: USA

F3YCCA 76 SMXG MXDS

AF BPN NO MLSBLS PROC CP4055821120, 7532

JOINT STAR DR BLDG 9001

TINKER AFB, OK 73145-3312

UNITED STATES

Derrick Anderson Email: derrick.anderson.1@us.af.mil Telephone: 4055829521

Delivery Schedule From date of lead time event to date of latest delivery 90 Calendar Days Date of Award Receipt

1 Each Ship To DoDAAC: F3YCCA CountryCode: USA

F3YCCA 76 SMXG MXDS

AF BPN NO MLSBLS PROC CP4055821120, 7532

JOINT STAR DR BLDG 9001

TINKER AFB, OK 73145-3312

UNITED STATES

Derrick Anderson Email: derrick.anderson.1@us.af.mil Telephone: 4055829521

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.247-34 F.o.b. Destination. Jan 1991

Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause-

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

COMBO

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC F03000 Issue By DoDAAC FA8139 Admin DoDAAC FA8139 Inspect By DoDAAC F3YCCA Ship To Code F3YCCA Ship From Code ____ Mark For Code ____ Service Approver (DoDAAC) ____ Service Acceptor (DoDAAC) ____ Accept at Other DoDAAC ____ LPO DoDAAC ____ DCAA Auditor DoDAAC ____ Other DoDAAC(s) ____ (*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Stacie.glover@us.af.mil

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Special Contract Requirements

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.204-13 System for Award Management Maintenance. Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations. Nov 2015 52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services. Nov 2023 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.203-7003 Agency Office of the Inspector General. Aug 2019 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. May 2024 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. Jan 2023 252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services. Jan 2023 252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7001 Buy American and Balance of Payments Program. Feb 2024 252.225-7002 Qualifying Country Sources as Subcontractors. Mar 2022 252.225-7021 Trade Agreements. Feb 2024 252.225-7036 Buy American-Free Trade Agreements--Balance of Payments Program. Feb 2024 252.225-7048 Export-Controlled Items. Jun 2013 252.232-7010 Levies on Contract Payments. Dec 2006 252.243-7001 Pricing of Contract Modifications. Dec 1991 252.244-7000 Subcontracts for Commercial Products or Commercial Services. Nov 2023 252.247-7023 Transportation of Supplies by Sea. Oct 2024

FAR Clauses Incorporated by Full Text

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders- Commercial Products and Commercial Services. (Alternate II) (Jan 2025) Alternate II (Jan 2025)

Alternate II (Jan 2025). As prescribed in 12.301 (b)(4)(ii), substitute the following paragraphs (d)(1) and (e)(1) for paragraphs (d)(1) and (e)(1) of the basic clause as follows:

(d)(1) The Comptroller General of the United States, an appropriate Inspector General appointed under section 3 or 8 G of the Inspector General Act of 1978 (5 U.S.C. App.), or an authorized representative of either of the foregoing officials shall have access to and right to-

(i) Examine any of the Contractor's or any subcontractors' records that pertain to, and involve transactions relating to, this contract; and

(ii) Interview any officer or employee regarding such transactions.

(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), and (c), of this clause, the Contractor is not required to flow down any FAR clause in a subcontract for commercial products or commercial services, other than-

(i) Paragraph (d) of this clause. This paragraph flows down to all subcontracts, except the authority of the Inspector General under paragraph (d)(1)(ii) does not flow down; and

(ii) Those clauses listed in this paragraph (e)(1). Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(A) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509).

(B) 52.203-15, Whistleblower Protections Under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5).

(C) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712).

(D) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(E) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub.

L. 115-232).

(F) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

(G)[ ]( 1) 52.204-30, Federal Acquisition Supply Chain Security Act Orders- Prohibition. (Dec 2023) (Pub. L. 115-390, title II).

[ ](2) Alternate I (Dec 2023) 52.204-30.

(H) 52.219-8, Utilization of Small Business Concerns (Jan 2025) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(I) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(J) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(K) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

(L) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

(M) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph

(f) of FAR clause 52.222-40.

(N) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

(O) [X] (1) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O 13627).

[ ] (2) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(P) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment- Requirements (May 2014) (41 U.S.C. chapter 67).

(Q) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(R) 52.222-54, Employment Eligibility Verification (Jan 2025) (Executive Order 12989).

(S) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

(T) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

(U)[ ] (1) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

[ ] (2) Alternate I (Jan 2017) of 52.224-3.

(V) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(W) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (Jun 2020) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(X) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

(Y) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Nov 2024) (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).

(Z) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

52.252-2 Clauses Incorporated by Reference. (Feb 1998)

Clauses Incorporated By Reference (Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

acquisition.gov ____ ____[Insert one or more Internet addresses]

(End of clause)

52.252-6 Authorized Deviations in Clauses. (Nov 2020)

Authorized Deviations in Clauses (Nov 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any DFARS[insert regulation name] (48 CFR Chp 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

DFARS Clauses Incorporated by Full Text

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause-

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery;

and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall-

(A) Determine whether to-

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ____, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

Supplemental Clauses Incorporated by Full Text

5352.201-9101 AFSC-TINKER Ombudsman (Jul 2023)

(a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.

(b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions).

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, (Primary)

Ms. Susan Skaggs

3001 Staff Drive

Tinker AFB OK 73145

Phone: (405) 739-2372

Fax: (405)-734-6181 susan.skaggs@us.af.mil

(Alternate)

Mr. Gregory May

3001 Staff Drive

Tinker AFB OK 73145

Phone: (405) 734-5135

Fax: (405)-734-6181 gregory.may@us.af.mil

Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

(d) The ombudsman has no authority to render a decision that binds the agency.

(e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer.

(End of clause)

FA813925Q0014

mailto:Susan.heath@us.af.mil mailto:gregory.may@us.af.mil

5352.223-9000 Elimination of Use of Class I Ozone Depleting Substances (ODS) (Jun 2024)

(a) Contractors shall not:

(1) Provide any service or product with any specification, standard, drawing, or other document that requires the use of a Class I ODS in the test, operation, or maintenance of any system, subsystem, item, component, or process; or

(2) Provide any specification, standard, drawing, or other document that establishes a test, operation, or maintenance requirement that can only be met by use of a Class I ODS as part of this contract/order.

(b) For the purposes of Department of the Air Force policy, the following products that are pure (i.e., they meet the relevant product specification identified in AFI 32-7086) are Class I ODSs:

(1) Halons: 1011, 1202, 1211, 1301, and 2402;

(2) Chlorofluorocarbons (CFCs): CFC-11, CFC-12, CFC-13, CFC-111, CFC-112, CFC-113, CFC-114, CFC-115, CFC-211, CFC-212, CFC-213, CFC-214, CFC-215, CFC-216, and CFC-217, and the blends R-500, R-501, R-502, and R-503; and

(3) Carbon Tetrachloride, Methyl Chloroform, and Methyl Bromide.

[NOTE: Material that uses one or more of these Class I ODSs as minor constituents do not meet the Department of the Air Force definition of a Class I ODS.]

(End of clause)

5352.242-9000 AFSC Tinker Contractor Access to Air Force Installations (Edited) (Jul 2023)

(a) The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation.

(b) The contractor shall submit a written request on company letterhead to the contracting officer listing the following: contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or Security Forces for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver's license, current vehicle registration, valid vehicle insurance certificate, and <> to obtain a vehicle pass.

(c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site.

(d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with <> citing the appropriate paragraphs as applicable.

(e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office.

(f) Failure to comply with these requirements may result in withholding of final payment.

(g) REAL ID ACT: Effective May 3, 2023 all contractors must comply with the REAL ID Act requirements. https://www.dhs.gov/real-id

(1) The following state/territory IDs are not compliant with the REAL ID Act requirements. https://www.dhs.gov/real-id They are as follows: Alaska, California, Idaho, Illinois, Kentucky, Maine, Massachusetts, Minnesota, Missouri, Montana, North Dakota, New Hampshire, Oklahoma, Oregon, Pennsylvania, South Carolina, Virginia, and Washington. The exceptions to this restriction are Washington and Minnesota Enhanced Driver's Licenses (EDLs) which display a red, white and blue American flag on the front of the ID card. EDLs exceed REAL ID Act guidelines and are considered acceptable forms of identification. Standard issue driver's licenses from the above states, however, are not compliant.

(2) There is no change for base access to individuals who already possess military issued credentials; non-DoD personnel without base access credentials will be the largest demographic affected by REAL ID Act requirements. Identity proofing was done using approved identification credentials with a background check conducted through law enforcement authoritative databases. That will not change on October 10, 2018.

(3) What will change is which ID's for proof of identity will be accepted. The forms of ID on this list are for use solely at Tinker AFB and several ID's on this list may not grant you entry for other Federal Facilities or military bases. If you are travelling to other Federal Installations/buildings it is recommended you contact them before travelling to that location. Tinker AFB acceptable alternative forms of ID are the following:

- U.S. Passport

- U.S. Passport Card

- PIV or Federally-issued PIV

- Driver's License issued by the U.S Department of State

- Border Crossing Card ( Form DSP-150)

- DHS "Trusted Traveler" Cards

- U.S. Military ID

- Veteran's Health Identification Card

- U.S. Permanent Resident Card (Form 1-551)

- U.S. Certificate of Naturalization (Form N-550)

- Employment Authorization Document issued by DHS (Form 1-766)

- U.S. Refugee Travel Document (Permit to Re-enter form 1-327 and Refugee Travel Document Form 1-571)

- Transportation Worker

- Identification Credential (TWIC)

- Merchant Mariner Card issued by USCG

- A state driver's license or ID that meets the REAL ID standards or has an extension

- State-issued EDLs

- Interim Driver's License issued by a state that meets the REAL ID standards or has an extension

- Native American Tribal Photo ID

- Foreign government-issued passport

- PIV-I cards

- Non-Real ID Act Driver's License supplemented with documentation listed:

- Social Security Card

- Birth Certificate

- Voter Registration Card

- State Issued Concealed Carry License

- State Issued Vehicle Registration

(4) All visitors are required to have the proper identification to access an Air Force installation. A REAL ID Act compliant credential will be required to establish individual identity. Those who do not have the accepted documentation for installation access will not be permitted to enter the base without an approved escort (contractors cannot escort other contractors).

(5) Delivery drivers will be required to receive an access pass and background check. It should only add a few minutes to the delivery time, provided the delivery driver meets the criteria for receiving an access pass. In order to conduct the background check, a REAL ID Act compliant credential will be required to establish individual identity. Those who do not have the accepted documentation for installation access will not be permitted to enter the base without an approved escort.

(6) There is no change for base access to individuals who already possess military issued credentials. Those incoming employees who do not currently have military issued credentials will need identity proofing using approved identification credentials with a background check conducted through law enforcement authoritative databases.

(End of clause)

List of Attachments

Number Attachment Name Attachment Description Reference Identifier Date Line Item

01 Equipment List Equipment List 24 Jun

Representations, Certification, & Other Statements

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.204-17 Ownership or Control of Offeror. Aug 2020 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations-Representation. Nov 2015 52.225-18 Place of Manufacture. Aug 2018

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7005 Representation Relating to Compensation of Former DoD Officials. Sep 2022 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls. Oct 2016

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services- Representation.

May 2021

FAR Clauses Incorporated by Full Text

52.212-3 Offeror Representations and Certifications-Commercial Products and Commercial Services.

(Alternate I) (May 2024) Alternate I (Feb 2024)

Alternate I (Feb 2024). As prescribed in 12.301 (b)(2), add the following paragraph (c)(12) to the basic provision:

(12) (Complete if the…