CSS USNS CESAR CHAVEZ MHE N3220522Q0078.pdf

MILITARY SEALIFT COMMAND

N10 - CONTRACTS AND BUSINESS MANAGEMENT DIRECTORATE

COMBINED SYNOPSIS/SOLICITATION

Military Sealift Command Combined Synopsis and Solicitation Notice Information

1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in

FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

2. Solicitation number is N3220522Q0078 and is being issued as a Request for Quotes (RFQ).

3. The solicitation document and incorporated provisions and clauses are those in effect through

Federal Acquisition Circular (FAC) FAC 2022-01 / 12-06-2021 located on https://www.acquisition.gov

4. The associated NAICS code is 811310 and the associated PSC code is J039 for this procurement: NOTE:

A Class Waiver is not applicable to a procurement unless the NAICS code, PSC, and NAICS Code Descriptor currently in effect, match the item(s) being procured.

is not being set-aside for small businesses.

is being set-aside for Small Business.

5. The table below lists the Contract Line Item Number(s) (CLIN(s)) and items, quantities and units of measure, inclusive of any applicable options:

SERVICES

CLIN DESCRIPTION QUANTITY UNIT OF

MEASURE

0001 Servicing HYSTER, HUBTEX, WESLEY

INTERNATIONAL, GENIE, and ENERSYS, INC

MHE. The service is for Materials Handling

Equipment (MHE) service and support to include repairs, services, and/or brand name OEM materials, and certification.

1 Activity Unit

6. Statement of Work

1. Statement of Work (SOW): The following work items shall be accomplished by the selected service provider (contractor) in conjunction with this repair and maintenance requirement. The Government intends to award a Fixed Price Contract to the selected service provider:

a. Services to MHE identified in Table 1 below shall be performed ashore (or on board USNS CESAR

CHAVEZ) at the customer activity location. The Contractor’s quote shall specify the proposed location of the service and provide a summary of the proposed process for training, maintenance, repairs, and safety recertification.

b. Contractor shall perform all related inspections, of MHE identified in Table 1 in accordance with the requirements set forth in references (a) and (b), attachments 1 and 2 and appropriate vehicle technical manuals.

c. SCOPE OF DIESEL FORKLIFT REPAIR WORK INCLUDES

PERFORM DIAGNOSTICS

Perform diagnostic service utilizing dashboard display, and – when required - Hyster approved and authorized Off-Board Laptop Diagnostic Troubleshooting Software, hardware, and diagnostic procedures.

Make sure speed is set at 5MPH

PERFORM VISUAL INSPECTION

Perform a complete inspection of the vehicle to include, but not be limited to, the following:

-Fluid Leaks

-Carriage, including Rollers and Slider Blocks

-Forks and Locks

-Mast Chains, Retainers, and Anchors

-Tire Condition

-Steering Components

-Overhead Guard

-Improper Modifications

-Seat Condition and Belts

-Attachments, including Towing Devices

PERFORM OPERATIONAL INSPECTION

-Safety Devices

-Neutral Starting Switch

-Instruments/Horn/Lights

-Brakes, Pedals, and Linkages

-Forward and Reverse Vehicle Operation

-Parking Brake

-Inching Control

-Shift Levers

-Steering

-Exhaust Smoke

-Mast Operation

-Tilt Cylinder Operation

-All Attachments

-Backup Alarms

CLEAN VEHICLE AND COMPONENTS

-All Painted Areas

-Radiator and Engine Compartment

-Steer and Drive Axle

-Mast

-Under Floor Plate

-Control Panel Area

-Operator Area

-Battery Tray

INSPECT ELECTRICAL SYSTEMS

-Panel Power Connections

-Check Seat Switch

-Check Wire Connections and Condition

-Check Distributor Cap and Rotor (if equipped)

-Clean Battery Cable and Connections

-Other Electrical Components, as Installed

-Perform Repairs, as required

INSPECT HYDRAULIC SYSTEMS

-All Hydraulic Lines, Hoses, and Fittings

-Mast and Hose Reel

-Lift, Tilt, and Shift Cylinders

-Hydraulic Tank and Breather

-Hydraulic Pumps

-Attachment Links

-Attachment Cylinders

-Control Valve Operation and Leaks

-Other Hydraulic Systems, as installed

LUBRICATE VEHICLE

-Clutch Pedal

-Accelerator Pedal

-Drive Line U-Joints

-Steer Axle

-Steering Mechanisms

-Mast, Chains, Rollers, Carriage Attachments

-Brakes and Parking Brake Linkages

-Accelerator Pedal

-Direction Pedal

-Lift and Tilt Control Hinges

-Other Lubrication Points, as installed

INSPECT FUEL SYSTEM

-Check for Leaks

-Check Fuel Lock-Off Regulators and Drain

-Clean Water Trap

-Perform Repairs, as Required

PERFORM ADDITIONAL MAINTENANCE ACTIONS

-Verify Stencils/Markings Per NAVSUP P-538 and Re-Stencil/Re-Mark as needed, marking should include SWL both sides, VW both sides (and in view of operator on mast assembly), all operator controls, Manufacture name plate, Accredited laboratory UL, MHE safety Certification and EE on three sides

-Check for Error Codes and Perform Non-Major Repairs, as required, to Clear Code

-Check Mast Mounting Trunnions and Re-Torque Bolts, as Needed

-Repack Leaking Lift, Tilt and Shift Cylinders

-Adjust Load Chains and Cylinder Rods

-Complete Electrical Tune-up (plus wires, rotors, etc., as equipped)

-Check/Adjust Belts Condition and Tension; Replace as Required

-Check Engine Compression

-Check and Adjust Ignition Timing (as equipped)

-Check and Adjust High and Low Engine RPMs

-Adjust Engine Valves and Replace Valve Cover Gasket (as equipped)

-Clean & Check PCV Valve (as Equipped); Replace as Needed

-Check/Clean Induction System

-Clean Filter Canister, Pre Cleaner

-Check Radiator Hoses; Replace as Required

-Change Air Cleaner

-Change Final Fuel Filter (as equipped) Date filter

-Change Engine Oil and Filter Date filter

-Change Transmission Oil and Filter Date filter

-Change Hydraulic Oil and Filters

-Change All Differential, Speed Reducer, and Final Drive Lubricants

-Drain, Flush, and Change Coolant

-Adjust Hydraulic Pressure, as required

-Inspect lights, Backup Alarm, and Associated Wiring; Repair/Replace, as required

-Remove Steer and Drive (Load) Wheels; inspect and Repack all four (4) Bearings

-Check Brakes, Wheel Cylinders, and Associated Hardware; Adjust/Repair as required

-Re-Torque Drive and Steer Wheel Nuts

-Evacuate Brake System; Replace Fluid with DOT 3 Brake Fluid, or Per Tech Manual

-Adjust Parking Brake and Linkage; Repair as required

-Adjust Steering Linkage; Repair as required

-Raise Rear of Vehicle and Manually Test Rear Brake Operation (with brake pedal pressed).

-Re-Adjust all Brakes, as required

-Perform Basic Corrosion Control Utilizing Wire Brush and Spot Paint Techniques.

-Submit Condition Found Report (CFR) and Quote for Required Major Repairs

d. SCOPE OF ELECTRIC FORKLIFT REPAIR WORK INCLUDES

PERFORM DIAGNOSTICS

Perform diagnostic service utilizing dashboard display, and – when required - Hyster approved and authorized Off-Board Laptop Diagnostic Troubleshooting Software, hardware, and diagnostic procedures.

Make sure speed is set at 5MPH

PERFORM VISUAL INSPECTION

Perform a complete inspection of the vehicle to include, but not be limited to, the following:

-Fluid Leaks

-Carriage, including Rollers and Slider Blocks

-Forks and Locks

-Mast Chains, Retainers, and Anchors

-Tire Condition

-Steering Components

-Overhead Guard

-Improper Modifications

-Seat Condition and Belts

-Attachments, including Towing Devices

PERFORM OPERATIONAL INSPECTION

-Safety Devices

-Neutral Starting Switch

-Instruments/Horn/Lights

-Brakes, Pedals, and Linkages

-Forward and Reverse Vehicle Operations

-Parking Brake, -Shift Levers

-Steering

-Mast Operations

-Lift, Tilt, and Shift Controls

-All Attachments

-Backup Alarms

CLEAN VEHICLE AND COMPONENTS

-All Painted Areas

-Steer and Drive Axle

-Mast

-Under Floor Plate

-Control Panel Area

-Operator Area

-Battery Compartment and Tray

-Motors and Pumps

INSPECT ELECTRICAL SYSTEMS

-Panel Power Connections

-Check Contactor Tips

-Check Seat Switch

-Battery Discharge Indicator, as installed

-Current Limiter, as installed

-Other Electrical Components, as installed

INSPECT HYDRAULIC SYSTEMS

-All Hydraulic Lines, Hoses, and Fittings

-Mast and Hose Reel

-Lift, Tilt, and Shift Cylinders

-Hydraulic Tank and Breather

-Hydraulic Pumps

-Attachment Links

-Attachment Cylinders

-Control Valve Operation and Leaks

-Other Hydraulic Systems, as installed

LUBRICATE VEHICLE

-Steer Axle

-Steering Mechanisms

-Mast, Chains, Rollers, Carriage Attachments

-Brakes and Parking Brake Linkages

-Accelerator Pedal

-Direction Pedal

-Lift and Tilt Control Hinges

-Other Lubrication Points, as installed

SERVICE BATTERIES AND BATTERY CHARGERS

Perform Battery Voltage Tests

-Check/Clean/Adjust Battery Cables

-Check/Clean/Adjust Battery Connectors

-Clean Terminals, Bus Bars and Top of Battery

-Fill Flooded Batteries with Double-Distilled Water

-Check Specific Gravity of Cells, as appropriate

-Charge Battery and Evaluate Overall Health

-Check Battery Charger Settings and Reprogram Chargers, as required

PERFORM ADDITIONAL MAINTENANCE ACTIONS

-Verify Stencils/Markings Per NAVSUP P-538 and Re-Stencil/Re-Mark as needed, marking should include SWL both sides, VW both sides (and in view of operator on mast assembly), all operator controls, Manufacture name plate, Accredited laboratory UL, MHE safety Certification and EE on three sides

-Check for Error Codes and Perform Non-Major Repairs, as required, to Clear Code.

-Replace Faulty Encoder Bearings

-Check Mast Mounting Trunnions and Re-Torque Bolts, as needed.

-Repack Leaking Lift, Tilt and Shift Cylinders

-Adjust Load Chains and Cylinder Rods

-Change Hydraulic Oil, Filters, and Breathers

-Adjust Hydraulic Pressure, as required

-Replace Loose/Warn Hydraulic Pump Motor Mount Bushings

-Inspect Lights, Backup Alarm, and Associated Wiring; Repair/Replace, as required.

-Check and Adjust Current Limiter

-Remove Steer and Drive (Load) Wheels, Inspect and Repack all four (4) Bearings

-Check Brakes, Wheel Cylinders, and Associated Hardware; Adjust/Repair as required.

-Re-Torque Drive and Steer Wheel Nuts

-Evacuate Front and Rear Brake Systems; Replace Fluid with DOT 3 Brake Fluid, or per Tech Manual.

-Check and Adjust Rear Brake Master Cylinder, Actuator Cable, Pivot Mechanism, Brake Lines, and

Associated Hardware; Repair as required.

-Adjust Parking Brake and Linkage; Repair as required.

-Check and Adjust Plugging Distances

-Adjust Steering Linkage; Repair as required

-Raise Rear of Vehicle and Manually Test Rear Brake Operation (with brake pedal pressed).

-Re-Adjust all Brakes, as required

-Perform Basic Corrosion Control Utilizing Wire Brush and Spot Paint Techniques.

-Remove, and inspect the counterweight, mounting bolt, for rust, corrosion, worn threads and threaded base plate surface. Re-install the counterweight, and mounting bolts that are within SAE standards, and re-torque the counterweight bolts to 410 foot pounds, or replace the bolts, and re-thread the base plates that fail the visual inspection, as required.

e. SCOPE OF PERIODIC MAINTENANCE INSPECTION AND SERVICE AERIAL WORK

PLATFORMS (AWP)

The Contractor shall inspect the platform's structural components for obvious physical damage, such as cracking, bending and deformation of members or welds. The Contractor shall also inspect the paint for cracking or flaking.

The Contractor shall inspect the entire platform for missing or loose bolts, nuts, brackets or supports.

The Contractor shall inspect the condition of the tires. The Contractor shall ensure proper inflation and verify tread is not damaged or cut.

The Contractor shall inspect all hydraulic lines for any possible loose connections and/or damaged fittings or hoses.

The Contractor shall inspect all hydraulic lines, reservoir, fuel tank, engine and gearbox for leaks.

The Contractor shall inspect the tank for any possible damage and verify the level of hydraulic fluid.

Level should be midway between 3/4 and full with the boom in the fully lowered and retracted position.

The Contractor shall inspect for broken, missing, inoperable or non-calibrated gauges, indicators and warning lights.

The Contractor shall rotate basket to the left and to the right, in order to verify the freedom of movement of the Basket.

The Contractor shall rotate the steering wheel to the left and to the right. Move aerial platform forward and aft a few feet. Ensure movements are smooth and properly operational.

The Contractor shall at the ground control console, position selector switch to "Ground". Turn ignition switch and start engine. Test all functions and verify proper operation.

The Contractor shall after starting engine, listen and note any unusual noises, check for any fluid leaks, loss of power, or poor response to controls. Verify the proper operation and correct readings of all gauges and indicators. Verify that the battery is charging.

The Contractor shall after the initial warm-up (5 minutes), perform engine turn off at the ground control console.

The Contractor shall Reposition the Aerial/Ground selector switch to "Aerial". Place ignition switches to

ON position and start engine from aerial platform. After Starting the engine the Contractor shall verify proper operation of the following controls: Boom Up/Down, Rotation CW/CCW, Platform Rotation, Boom Out/In, Drive FWD/ Reverse, Throttle High/Low and Platform Tilt.

The Contractor shall raise and lower boom checking for freedom of movement. Extend and retract boom, and check freedom of travel. Swing boom to left and right, and check for freedom of movement.

The Contractor shall shutdown the engine using each of the emergency stop switches. Verify entire system shuts down.

The Contractor shall after shutting engine off using one of the emergency stop switches, start emergency motor driven hydraulic pump and operate at least one function to verify emergency hydraulic pump is working.

The Contractor shall manually operate the off level warning device so the audible alarm can be heard, indicating the level system is functional.

The Contractor shall place the rated load on platform, lift the platform to full extension, hold for two minutes, and verify that no drifting or leaking occurs. Contractor shall then fully extend the boom to each side to test vehicle stability.

The Contractor shall perform period maintenance requirements identified in the applicable manufacturer

Technical Manual.

The Contractor shall fill out and sign the attached Aerial Work Platform (AWP) Safety Inspection and

Weight Test Certification. The original signed form shall be provided to the ship's Master or his designated representative. A copy of the signed form shall be provided to the MSC Norfolk MHE

Program Management office.

f. SCOPE OF BATTERY CHARGER MAINTANANCE

Validate battery chargers are configured correctly

Clean, inspected and adjust as needed

g. WESLEY Manual Pallet Jacks

Verify Stencils/Markings per NAVSUP P-538 and Re-Stencil/Re-Mark as needed

All Hydraulic Lines, Hoses, and Fittings (change if needed)

Perform Basic Corrosion Control Utilizing Wire Brush and Spot Paint Techniques

Brakes and Brake Linkages

Lubricate / inspected all wheels (changed if needed)

2. Equipment to be serviced:

USNS CESAR CHAVEZ - TABLE 1

MANUFACTURER MODEL MSC

NUMBER

SERIAL

NUMBER

CONDITION REPORT

DISCREPANCIES

HYSTER E40ZG 2302074 G108N09314F NONE TO NOTE

HYSTER E40ZG 2302080 G108N09512F NONE TO NOTE

HYSTER E40ZG 2302363 G108N10973F NONE TO NOTE

HYSTER E40ZG 2302364 G108N10970F NONE TO NOTE

HYSTER E40ZG 2302365 G108N10974F TRACTION MOTOR NOT

WORKING, unit receives power but fails to rotate.

Encoder bearing tested sat.

HYSTER E60ZG 2302373 G108N11350G NONE TO NOTE

HYSTER E60XM 2302600 F108G01551T NONE TO NOTE

HYSTER E60XM 2302601 F108G04699T NONE TO NOTE

HYSTER E60XM 2302602 F108G04697T NONE TO NOTE

HYSTER E60XM 2302603 F108G04718T NONE TO NOTE

HYSTER E60XM 2302604 F108G04711T Unit travels forward and reverse, however trips when switching directions or changing speeds rapidly or trips randomly during travel.

HYSTER E60XM 2302605 F108G08001T NONE TO NOTE

HYSTER E100Z 2302610 E098N02575H NONE TO NOTE

HYSTER E100Z 2302611 E098N02577H NONE TO NOTE

HYSTER E100Z 2302612 E098N02574H NONE TO NOTE

HYSTER E100Z 2302613 E098N02579H HYDRAULIC motor controller contactor fails to close. Master controller indicates properly and solenoid is not getting 36VDC signal to close.

HYSTER S60FTG 2302634 F187G19246J NONE TO NOTE

HYSTER S60FTG 2302635 F187G19265J NONE TO NOTE

HYSTER S60FTG 2302636 F187G19266J NONE TO NOTE

HYSTER S60FTG 2302637 F187G19298J NONE TO NOTE

HYSTER S60FTG 2302638 F187G19299J NONE TO NOTE

HYSTER S60FTG 2302639 F187G19231J NONE TO NOTE

HYSTER S60FTG 2302640 F187G19308J NONE TO NOTE

HYSTER S60FTG 2302641 F187G19300J NONE TO NOTE

HUBTEX VQ 45/4 2900109 62239 NONE TO NOTE

HUBTEX VQ 45/4 2900076 60055 NONE TO NOTE

WESLEY INT'L 42-27-

60XTSB

2800097 07Y10337 NONE TO NOTE

WESLEY INT'L 42-27-

60XTSB

2800098 07Y10338 NONE TO NOTE

WESLEY INT'L 42-27-

60XTSB

2800099 07Y10339 NONE TO NOTE

WESLEY INT'L 42-27-

60XTSB

2800100 07Y10340 NONE TO NOTE

WESLEY INT'L 42-27-

60XTSB

2800101 10Y11443 NONE TO NOTE

WESLEY INT'L 42-27-

60XTSB

2800102 10Y11446 NONE TO NOTE

WESLEY INT'L 42-27-

60XTSB

2800103 10Y11444 NONE TO NOTE

WESLEY INT'L 42-27-

60XTSB

2800104 10Y11445 NONE TO NOTE

GENIE Z-45/25J 2500015 Z452512A-

43105

NONE TO NOTE

ENERSYS INC/ 36

V

SES3C-18-

1050BNL20

N/A JE82219 NONE TO NOTE

ENERSYS INC/ 36

V

SES3C-18-

1050BNL20

N/A JE82220 NONE TO NOTE

ENERSYS INC/ 36

V

SES3C-18-

1050BNL20

N/A JE82221 NONE TO NOTE

ENERSYS INC/ 36

V

SES3C-18-

1050BNL20

N/A JE82222 NONE TO NOTE

ENERSYS INC/ 36

V

SES3C-18-

1050BNL20

N/A JE82223 NONE TO NOTE

ENERSYS INC/ 36

V

SES3C-18-

1050BNL20

N/A JE82224 NONE TO NOTE

ENERSYS INC/ 36

V

SES3C-18-

1050BNL20

N/A JE82225 NONE TO NOTE

ENERSYS INC/ 36

V

SES3C-18-

1050BNL20

N/A JE82226 NONE TO NOTE

ENERSYS INC/ 36

V

SES3C-18-

1050BNL20

N/A JE82227 NONE TO NOTE

ENERSYS INC/ 36

V

SES3C-18-

1050BNL20

N/A JE82228 NONE TO NOTE

ENERSYS INC/ 36

V

SES3C-18-

1050BNL20

N/A JE82229 NONE TO NOTE

ENERSYS INC/ 36

V

SES3C-18-

1050BNL20

N/A JE82230 NONE TO NOTE

ENERSYS INC/ 72

V

SES3C-36-

1050BNL20

N/A JE82231 NONE TO NOTE

ENERSYS INC/ 72

V

SES3C-36-

1050BNL20

N/A JE82232 NONE TO NOTE

ENERSYS INC/ 72

V

SES3C-36-

1050BNL20

N/A JE82233 CIRCUIT CARD will not allow programming for 36 cell battery Unable to charge side loader batteries at this time

3. Deliverables:

The contractor shall provide

a. Contractor shall complete and sign an MHE Safety Certification form for each asset (forklift, side loader, manual pallet jack) listed in Table 1 in accordance with NAVSEA Instruction SW023-AH-WHM-

010 reference (a). Provide a copy to the MHE Program Support Office at MSC Norfolk upon completion of service

b. Contractor shall complete and sign CDRL A0002 Fork Inspection form for each unit listed in Table 1.

Provide a copy to the MHE Program Support Office at MSC Norfolk upon completion of service.

c. Contractor shall complete and sign Aerial Work Platform Certification Form for each unit listed in

Table 1. Provide a copy to the MHE Program Support Office at MSC Norfolk upon completion of service.

d. Contractor shall send status report of all battery chargers listed in Table 1 to the MHE Program Support

Office at MSC Norfolk upon completion of service.

e. Contractor shall coordinate with the technical point of contact to arrange U.S. Government inspection of the MHE/forklifts prior to their return. The inspection will occur on a date mutually agreed upon by the service provider and technical point of contact.

f. Contract must be able to read and understand all items listed on this SOW (Ref 1, 2 and encl 1-3).

g. If additional repair action are needed, YOU MUST contact N10 contract specialist (MSC government representative) for approval prior to completing. Additional work must be submitted on condition found report within 10 days of receipt.

4. Qualifications: The selected service provider/contractor must meet the following qualifications.

a. All management and technical personnel performing above listed services must be able to demonstrate the following:

- Experience performing safety certifications on shipboard-approved MHE in accordance with the requirements set forth in the NAVSEA SW023-AH-WHM-010, NAVSUP PUB 538, and equipment technical manuals.

- Experience interpreting, trouble-shooting, and resetting HYSTER on-board dash displays.

- Access to HYSTER proprietary hardware and software required to reset onboard electronics.

- Able to read and understand the Technical Exhibits and meet all requirement.

b. Contractor shall staff and equip the service with the capability to perform all actions without assistance from MSC personnel.

c. Contractor must have access to technical and diagnostic manuals applicable to the equipment being serviced.

d. Contractor shall have the ability to change/press tires using existing location tire press (if available) and/or obtain alternate services relative to satisfying the MHE asset requirement. If contractor is performing fly in service – service provide is not responsible for changing / press tires due to time restraints.

e. Contractor must be able to perform the required services within the Period of Performance (POP) identified in this Statement of Work document. If additional work is identified, and approved by the

Government, the Contractor must have the ability to complete the additional service work by close of the requested POP as well.

f. Contractor shall complete a security form for each employee that will be servicing MHE onboard government installations and submit the information (including, but not limited to name, social security number, and birth date) to Military Sealift Command (MSC)/MSC Security Officer, as requested. The

Government will provide approval for personnel to access base installation locations for a pre-determined timeframe (up to one year), as appropriate.

g. Contractor personnel performing maintenance and repairs onboard MSC vessels or affiliated shore activities shall abide by all DOD, Navy, MSC security requirements and clearance procedures required to access U.S. Government facilities and/or MSC customer locations.

5. NORFOLK - Technical Points of Contact (POCs):

- Primary POC: Damian Schmitt – Email: damian.r.schmitt2.civ@us.navy.mil

Phone: 757-443-1463

- Alternate POC: Robert Hall – Email: robert.m.hall1.ctr@us.navy.mil

Phone: 757-443-0925

6. Travel:

a. Access paperwork: Will be provided by MSC designated representative, as appropriate.

7. Place of Performance:

USNS CESAR CHAVEZ

GUAM

15 JAN – 18 FEB 2022

file:///C:/Users/ryan.e.greer/AppData/Local/Microsoft/Windows/INetCache/Content.Outlook/LN5WQ3NV/damian.r.schmitt2.civ@us.navy.mil mailto:robert.m.hall1.ctr@us.navy.mil

7. Services Contract Reporting (SCR):

Services Contract Reporting (SCR) requirements apply to this contract. The contractor shall report required SCR data fields using the SCR section of the System for Award Management (SAM) at following web address: https://sam.gov/SAM/

(End of Statement of Work)

7. The provision at FAR 52.212-1, Instructions to Offerors – Commercial applies to this acquisition and is incorporated by reference. The provision is amended as follows:

52.212-1 (ADDENDUM) ADDITIONAL INSTRUCTIONS TO OFFERORS--COMMERCIAL

ITEMS

a. Any inconsistency between FAR Provision 52.212-1 and the Addendum to FAR 52.212-1 shall be solved by giving precedence to the Addendum to FAR 52.212-1.

b. After receipt of quotes the Government may, with or without notice, negotiate with and, if desired, seek quote revisions from as many or as few quoters as it, in its discretion, deems appropriate.

c. The term “offeror” or “offer” as used in FAR 52.212-1 shall be understood to mean “quoter” and

“quote,” respectively. Further, the term “award” shall be understood to describe the Government’s issuance of an order.

d. The Government will consider all quotes that are timely received and may consider late quotes.

Failure of a quote to address any items required in the submission package may make a quote unacceptable.

e. Paragraph (b) of FAR Provision 52.212-1, Submission of Offers, is amended as follows:

In addition to the quote submission requirements stated in FAR provision 52.212-1, quoters shall provide the following, as part of the quote submission package, no later than the required time and date for quote submission:

https://sam.gov/SAM/

Responsible sources shall provide the following:

1. Price quote which identifies the requested item(s), unit price inclusive of shipping (if any), and extended price.

2. Total Firm Fixed price

3. Price quotes shall be accompanied by the vendor’s published labor rates.

4. Any Discount Terms

5. Estimated time of delivery

6. Technical Submission Requirements

a. For Parts/Supply buy, the quote shall contain a description including part number and title for each item listed in the solicitation to allow the Government to verify that the quoted parts match the requirements listed in the requirements schedule. Brand Name/OEM parts shall be used for this service.

b. Quote shall contain ALL material, labor and travel to complete the entire service requirement without contract modification in as much as possible.

c. It is strongly encouraged that prospective offerors comply with FAR 52.237-1 Site Visit to determine what material is required prior to submitting a quote. Points of contact are in

Paragraph 5 of the SOW.

d. Quote must contain proof that the vendors have the experience and capability as specified in paragraph 4 of the statement of work above. Failure to provide proof will be considered non-compliant and will be deemed non-responsive.

7. Responses to the solicitation are due 5 Jan 2022 @ 1200 noon, Norfolk, VA time. Quotes may be e-mailed to ryan.e.greer.civ@us.navy.mil and James Van Natta, james.m.vannatta.civ@us.navy.mil. Please be sure to copy both parties with your quote. To be considered timely, an E-mail quote must be received in its entirety in the designated E-mail inbox by the due date and time for quote submission. Quotes received after that time will be considered at the Government’s sole discretion. Please reference the solicitation number on your quote.

Primary Point of Contact: Ryan Greer / 757-443-1190 / ryan.e.greer.civ@us.navy.mil

Secondary Point of Contact: James Van Natta / 757-443-5949 / james.m.vannatta.civ@us.navy.mil

The Government will consider all quotes that are timely received and may consider late quotes in accordance with 52.212-1. Failure of a quote to address any items listed in the attached submission package may make a quote unacceptable.

8. Provision 52.212-2 Evaluation—Commercial Items (Oct 2014) applies to this acquisition.

(a) The Government may award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

(i) technical capability of the item offered to meet the Government requirement;

(ii) price;

Award shall be made to the lowest priced technically acceptable offeror in LPTA solicitations.

To be considered a technically acceptable solution for a parts procurement, the quoted parts shall meet the solicitation requirements including required parts, delivery dates, and terms and conditions stated in the solicitation.

To be considered a technically acceptable solution for a service, the quoted service shall meet the solicitation requirements including terms and conditions stated in the solicitation. The quote shall state that all aspects of the technical requirement, including required delivery date and part numbers, can be met. The offeror’s quote shall not contain terms and conditions.

mailto:ryan.e.greer.civ@us.navy.mil mailto:%20james.m.vannatta.civ@us.navy.mil

The Government will evaluate quoted pricing for reasonableness utilizing techniques described in FAR 13.106-3.

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror by the Government within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

9. All Offerors must include a completed copy of FAR 52.212-3, Offeror Representations and Certifications –

Commercial Items with its offer.

10. Clause 52.212-4 Contract Terms and Conditions – Commercial items (OCT 2018), applies to this acquisition.

11. CLAUSE 52.212-5, CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT

STATUTES OR EXECUTIVE ORDERS – COMMERCIAL ITEMS (OCT 2019), applies to this acquisition along with the following FAR Clauses cited in the clause are applicable.

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement p89rovisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017)

(section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by

Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(4) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(5) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19

U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

____ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995)

(41 U.S.C. 4704 and 10 U.S.C. 2402).

____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June

2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment

Act of 2009.)

XX (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub. L. 109-

282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div.

C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub.

L. 111-117, section 743 of Div. C).

_XX_ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41

U.S.C. 2313).

____ (10) [Reserved]

____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).

____ (ii) Alternate I (NOV 2011) of 52.219-3.

____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014)

(if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (ii) Alternate I (JAN 2011) of 52.219-4.

____ (13) [Reserved]

(14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).

____ (ii) Alternate I (NOV 2011).

____ (iii) Alternate II (NOV 2011).

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

____ (ii) Alternate I (Oct 1995) of 52.219-7.

____ (iii) Alternate II (Mar 2004) of 52.219-7.

____ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (Aug 2018) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (Nov 2016) of 52.219-9.

____ (iii) Alternate II (Nov 2016) of 52.219-9.

____ (iv) Alternate III (Nov 2016) of 52.219-9.

____ (v) Alternate IV (Aug 2018) of 52.219-9.

____ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).

____ (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)).

____ (20) 52.219-16, Liquidated Damages—Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C.

657f).

XX (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)).

____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-

Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

____ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns

Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

XX (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

____ (26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Jan 2018) (E.O. 13126).

XX (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

XX (28)(i) 52.222-26, Equal Opportunity (SEPT 2016) (E.O. 11246).

____ (ii) Alternate I (Feb 1999) of 52.222-26.

_XX_ (29)(i) 52.222-35, Equal Opportunity for Veterans (OCT 2015)(38 U.S.C. 4212).

____ (ii) Alternate I (July 2014) of 52.222-35.

XX (30)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUL 2014) (29 U.S.C. 793).

____ (ii) Alternate I (July 2014) of 52.222-36.

_XX_ (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

____ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496).

____ (33)(i) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in

22.1803.)

____ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May

2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (June, 2016) (E.O. 13693).

____ (37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners

(June, 2016) (E.O. 13693).

____ (38) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and

13514).

____ (ii) Alternate I (OCT 2015) of 52.223-13.

____ (39)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-14.

____ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

____ (41)(i) 52.223-16, Acquisition of EPEAT[supreg]-Registered Personal Computer Products (OCT 2015) (E.O.s

13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-16.

XX (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O.

13513).

____ (43) 52.223-20, Aerosols (June, 2016) (E.O. 13693).

____ (44) 52.223-21, Foams (June, 2016) (E.O. 13693).

____ (45)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

____ (ii) Alternate I (JAN 2017) of 52.224-3.

____ (46) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

____ (47) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter

83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L.

103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I (May 2014) of 52.225-3.

____ (iii) Alternate II (May 2014) of 52.225-3.

____ (iv) Alternate III (May 2014) of 52.225-3.

____ (48) 52.225-5, Trade Agreements (AUG 2018) 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

__XX__ (49) 52.225-13, Restrictions on Certain Foreign Purchases (JUNE 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (50) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016)

(Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

____ (51) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150

____ (52) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C.

5150).

____ (53) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10

U.S.C. 2307(f)).

____ (54) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

XX (55) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (Oct 2018) (31 U.S.C.

3332).

____ (56) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (July

2013) (31 U.S.C. 3332).

____ (57) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (58) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

____ (59) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(12)).

____ (60)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C.

Appx. 1241(b) and 10 U.S.C. 2631).

____ (ii) Alternate I (Apr 2003) of 52.247-64.

____ (iii) Alternate II (Feb 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

_____ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495).

___ (2) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

___ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

_____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple

Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY

2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

_____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain

Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

___ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658).

__XX__ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

_____ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph

(d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the

Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017)

(section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by

Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(iv) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(v) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).

(viii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018), (41 U.S.C. chapter 67).

(xiii) __XX_ (A) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O.

13627).

_____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain

Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xvi) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xvii)52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

(xviii) (A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

(xix) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section

862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx

1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

12. The following additional information is applicable to this acquisition:

CLAUSES INCORPORATED BY REFERENCE

52.203-18 Prohibition on Contracting with Entities that Require Certain Internal

Confidentiality Agreements or Statements-Representation

JAN 2017

52.204-7 System for Award Management OCT 2018

52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011

52.204-13 SAM Maintenance OCT 2018

52.204-16 Commercial and Government Entity Code Reporting AUG 2020

52.204-21 Basic Safeguarding of Covered Contractor Information Systems JUN 2016

52.204-22 Alternative Line Item Proposal JAN 2017

52.212-4 Contract Terms and Conditions--Commercial Items OCT 2018

52.222-62 Paid Sick Leave Under Executive Order 13706 JAN 2017

52.232-18 Availability Of Funds APR 1984

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.232-40 Providing Accelerated Payments to Small Business Subcontractors NOV 2021

52.237-2 Protection of Government Buildings, Equipment, and Vegetation APR 1984

52.245-1 Government Property JAN 2017

52.245-9 Use and Charges APR 2012

52.247-34 F.O.B. Destination NOV 1991

252.203-7000 Requirements Relating to Compensation of Former DoD Officials SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013

252.203-7005 Representation Relating to Compensation of Former DoD Officials NOV 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992

252.204-7004 Level I Antiterrorism Awareness Training for Contractors FEB 2019

252.204-7008 Compliance With Safeguarding Covered Defense Information Controls OCT 2016

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting OCT 2016

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support MAY 2016

252.211-7007 Reporting of Government-Furnished Property AUG 2012

252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous

Materials

SEP 2014

252.223-7008 Prohibition of Hexavalent Chromium MAY 2011

252.225-7001 Buy American And Balance Of Payments Program-- Basic DEC 2017

252.225-7002 Qualifying Country Sources As Subcontractors DEC 2017

252.225-7048 Export-Controlled Items JUNE 2013

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006

252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personne NOV 2010

252.244-7000 Subcontracts for Commercial Items JUN 2013

252.244-7003 Subcontracts for Commercial Items and Commercial Components (DoD

Contracts)

OCT 2020

252.245-7001 Tagging, Labeling and Marking of GFP APR 2012

252.245-7002 Reporting Loss of Government Property (DEVIATION 2020-O0004) FEB 2020

252.245-7003 Contractor Property Management System Administration APR 2012

252.245-7004 Reporting, Reutilization and Disposal DEC 2017

252.246-7003 Notification of Potential Safety Issues JUN 2013

252.247-7023 Transportation of Supplies by Sea APR 2014

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (DEC 2019)

The Offeror shall not complete the representation in this provision if the Offeror has represented that it “does not provide covered telecommunications equipment or services as a part of its offered products or services to the

Government in the performance of any contract, subcontract, or other contractual instrument” in the provision at

52.204-26, Covered Telecommunications Equipment or Services-Representation, or in paragraph (v) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Items.

(a) Definitions. As used in this provision—

“Covered telecommunications equipment or services”, “critical technology”, and “substantial or essential component” have the meanings provided in clause 52.204-25, Prohibition on Contracting for Certain

Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition. Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year

2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Contractors are not prohibited from providing—

(1) A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(2) Telecommunications equipment that cannot route or redirect user data traffic or permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management

(SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”.