CR83902DryFreightBody.xls

This is a specification document for a state and local contract opportunity in Maine for the procurement of a heavy-duty aluminum dry freight body with lift gate, designated as CR83902. The specification outlines detailed requirements for a custom-built freight body to be installed on a 2013 Ford F450 Cab & Chassis, Extended Cab, 2-wheel drive configuration with a 6.7L Diesel engine and 16,500 GVWR. The body specifications include an interior length of 108 inches, width of 90 inches, and height of 79 inches, with a flat laminated hardwood floor, one-piece crowned aluminum roof, and aluminum exterior walls. The body must be equipped with a 2,000-pound capacity Tommy Gate or equivalent rail-style lift gate, a person-access door on the right side, and full-width roll-up rear doors with grab handles. Additional requirements include two LED high-intensity dome lights with cab-mounted controls, exterior lights and reflectors compliant with FMVSS specifications, four rubber mud flaps, and a Class V drop receiver hitch rated for 10,000 pounds.

The specification requires bidders to include pickup and delivery costs for the vehicle installation at CFM's Augusta location in their bid submissions. All electrical connections must be sealed with heat shrink and protected with heavy-duty wire loom, with no "Scotch-Lok" style connectors permitted. The document provides spaces for bidders to enter unit costs, total costs, contact information, vendor comments, and estimated delivery timeframes. The specification does not explicitly state the quantity of units required, response deadlines, funding amounts, or award dates within the provided documentation.