Cost and Item Spreadsheet v1.xlsx

Instructions

FULL LIST

1725 rpm, 110 volt-60hz sanding belt motor 6″ – 3 jaw chuck Separate safety switches for Lathe and Sanding Belt motors Accepts 72″ belts, 5/8″ to 2″ widths Aircraft aluminum belt drive and idlers pulleys Integral belt guard for your safety Spring loaded arm for ease of belt changes Foot operate, spring loaded, locking, live center release Adjustable center Adjustable taper Cam can be mounted without removing gear Heavy duty design Foot anchors on each leg Contact wheels available – 3/4″, 7/8″, 1″, 1-1/8″

Built with hydraulic motors driving planetary gearboxes.

½” mild steel capacity and 120” (10-foot) length Large 10 hp motor runs on 480-volt 3-phase power and includes conical bending system All 4 forming rolls are hardened and polished with 2 central driven rolls Dual hydraulic motors and high-efficiency planetary gearboxes directly rotate the 2 driven rolls Front rolls have independent hydraulic lifters that go in the orbital pattern Stabilizer torsion bar system keeps front rolls parallel to the top roll Plate is always pinched during the rolling cycle, so there’s no chance to lose the position Conveniently movable operator console with control panel and toggles on the console make it simple to control the roll movement 2 DROs on the control panel show the front and back roll positions for repeatability Hydraulic system for material removal: yoke on top roll drops, allowing the roll to lift Specifications:

Maximum Forming Length: 122 in.

Motor (HP): 10 HP 3 ~ 480V Weight: 17,600 lbs

Controls: Push button and switch controls are at your fingertips. The fully guarded, 2-position 110v footswitch lets you interrupt the cutting stroke at any point in its cycle.

Easy Material Handling: A sturdy backgauge and rake angle adjustment minimizes twist and distortion. This makes it possible to increase the rake for cutting heavier stock and extend maximum capacity of the machine. A 4' squaring arm with a recessed scale makes for fast, easy measurement.

Single Piece Top and Bottom, High Carbon, High Chrome Shock Resistant Knives: Provide four separate edges for clean cuts and long blade life. Easy blade gap adjustment means precise cuts for a wide variety of materials.

Electrical System: Meets NFPA 79 and construction requirements of the ANSI B11.4. All machines have disconnect switches magnetic starters, 110/120v controls, and 208-230/460v 3 phase, others optional.

Backgauges: A Betenbender Shear is capable of shearing 1/8" (10 GA) material to the following tolerance: Dimension - The width of the off-cut portion of the workpiece is within ±0.005 inch of the backgauge setting.

Specifications:

Knives: 1x3 Motor: 10 hp, 230 Volt, Three Phase Weight (May Vary): 6,700 lbs Overall Length: 97" Overall Height: 55" Table Height: 32" Anchor Bolt Dimension/Length: 76" Anchor Bolt Dimension/Width: 36" End Plate Width: 30" Machine with Backgauge: 74" Squaring Arm Length, 4' Std: 30" Knife Length: 76" Rake Angle per Rated Capacity: 1/4" Strokes per Minute: 35" Number of Hold-down Pins: 13" 36" Power Backgauge with LED Readout Inch / Metric.

4' Squaring Arm with Inlaid Scale All Hydraulic Fluids Included All Steel Construction American Made Hoses and Fittings American Made Motor and Valves Disconnect Switch Hour Meter Hydraulic Pressure: 2500 psi Hydraulic Self-Compensating Hold-down Bar Assembly Light Beam Gauge (Shadow Line) Linemaster Foot Switch Manual Rapid Blade Gap Adjustment (3/8" and Larger) Manual Swing up Backgauge NEMA Electrics Power Adjust Variable Rake Safety Switch for Front Guard Single Piece Top and Bottom, Shock Resistant Knives with Four Cutting Edges 4 3441 BJOA4N4292E714 Akyapak Angle Roller Angle Roller APK 81 1 EA $ - 0 “JAF requires tool sets Quantity (2) : One set for 1” external diameter pipe and one set for 2” external diameter pipe.” Key Features:

70mm roll shaft diameter Maximum pipe capacity 3″ Sch. 40 Maximum angle capacity 3″ x 3″ x 3/8″ Bending speeds 20% faster than competitive machines Universal tooling set included with each machine – 9.5″ O.D.

Forged roll shafts precision ground and fitted for maximum performance and minimal deflection Heavy duty structure and rigid components for high section modulus ratings Reinforced engineered mainframe design Three axis hydraulic twist system for angle iron “Leg-in” applications Patented by Ercolina, simultaneous downfeed and roll movement minimizes deformation Programmable touch pad controls with digital center roll positioning display Memory storage with eight (8) individual programs and unlimited passes Remote control pendent with low voltage controls and foot pedal switch Threaded roll shafts with micrometric flange adjustment helps eliminate spacer usage Inline direct drive roll shaft system with motor and brake on each shaft All capacities based on mild grade materials; heavy wall and high tensile materials reduce machine capacity.

5 4910 BJOA4N4292E715 Comec Incorporated Cylinder Block Boring and Milling Machine ACF200 2 EA $ - 0 boring range 30-200 mm boring height 600 mm milling width 400 mm milling length 650 mm Despite its compact dimensions, the ACF200 ensures considerable work capacities, thanks to the wide longitudinal and transversal table feed and the vertical feed of the head.

This machine includes both main recoditioning operations of light and heavy vehicles cylinder blocks: boring and resurfacing.

Standard equipment:

Adjustable spindle speed with digital indicator Adjustable boring bar feed Adjustable table feed (only model ACF) 1/2” CBN or PCD milling plate dia. 350 mm Tool setting dial indicator with magnetic base Depth of boring device with dial indicator Precision centering device with dial gauge Adjustable control stop PV0160 Pair of parallel supports Wrench set Instruction manual Specifications:

Boring range: 30÷170 mm Max head vertical travel: 670 mm Min-Max distance from head to table: 370÷1020 mm Distance between spindle C/L and column: 290 mm Table surface: 1340x370 mm Max table longitudinal travel: 1200 mm Max table transverse travel: 200 mm Adjustable spindle rotation speed: 75÷850 rpm Adjustable boring bar feed: 0÷175 mm/min.

Adjustable table feed: 0÷460 mm/min.

Spindle motor power: 1.5 kW Rapid feed motor power: 0.37 kW Table feed motor power: 0.55 kW Dimensions (LxWxH): 1860x1150x2170 mm Weight: 1380 Kg

The sturdy construction of the machine offers a high structural rigidity, thereby assuring an extremely accurate finishing.

The honing head feed system is carried out through a recirculating ball screw, and the rotation is activated by a powerful electrical motor.

Thanks to the touch screen control system, which is located in front of the operator, it is possible to enter the work parameters to be calculated by the integrated software, thus speeding up the operation and increasing the honing head's rotation speed.

Standard equipment:

Head movement on linear guides Vertical honing head travel by recirculating ball screw Touch screen control panel Electronic handwheel for honing head movement Operating software for manual and automatic working process Double effect hand-wheel for expanding/retracting the honing head Cooling system with magnetic filtering system Universal cylinder blocks fixture Splash and safety guards Wrench set Instruction manual Specifications:

Min-Max honing diameter: 25÷500 mm Max spindle travel: 300 mm Spindle rotation speed: 0÷150 rpm Max distance table-honing head: 600 mm Max longitudinal head travel: 780 mm Max workpiece dimensions: 900x800x550 mm Spindle motor: 0,75kW Honer Feed motor: 1,5 kW (7Nm) Cooling pump motor: 0,15kW Dimensions (LxWxH): 1560x1020x2160 mm Net weight: 600 Kg 7 4910 BJOA4N4292E717 Comec Incorporated Flywheel Grinding Machine RTV612 1 EA $ - 0 diameter of flywheel: 600 mm Grinding machine represents the most advanced solution in terms of reconditioning of flywheels, clutch friction plates and pressure plates in industrial vehicles. Thanks to its flexibility, this flywheel surface grinder is also suitable for the fine grinding of any other circular piece like discs, rings or flanges.

It differs from the RTV600 because of its 9Kw motor, which gives more power on the grinding wheel axis and widens the range of working.

Standard equipment:

Head power feed Splash and safety guard Cooling plant complete with pump and settling tank Grinding wheel dresser Wheel dressing diamond Cup grinding wheel for cast iron Set of centering cones Set of supporting rings Dial gauge with support Blocking screws Lubricant for slides Emulsifiable oil Wrench set Instruction manual Specifications:

Maximum grinding diameter: 630 mm Rotary table diameter: 450 mm Max distance table-wheel: 220 mm Taper grinding wheel diameter: 150 mm Grinding wheel speed: 2800 rpm Rotary table speed: 5÷30 rpm Head motor power (RTV612): 4 kW (9 kW) Table motor power: 0,55 kW Rapid feed head motor power: 0,18 kW Dimensions (LxWxH): 1200x900x1600 mm Weight: 710 Kg

Technical data

DIMENSIONS MACHINE

SPECIAL BAND SAW

MOTOR

DIMENSION

SACKS OF CONTAINMENT

MOTOR

DIMENSIONS AND SPECIFICATIONS TOUPIE

CAR FEATURES

ENGINE

Flux Cored (FCAW)

MIG (GMAW)

Auxiliary Power 115 V standard provides 15 amps of circuit-breaker-protected power Input Power 208/230/460 V or 575 V, 3-phase, 60 Hz 230 V, 1-phase, 60 H Input Phase = 3-phase Rated Output 350 A at 60% duty cycle Output Range 20–400 A, 10–38 V Memory buttons for quick program recall Display and controls for volts/arc length, wire feed speed, and EZ-Set (if selected) Arc control to fine tune the welding arc LCD setup screen Jog and purge button Trigger hold, trigger select, preflow and postflow button 15 4910 BJOA4N4292E732 DRS auto parts company LTD Common Rail Test Bench DRS-619 1 EA $ - 0 Includes both EUI EUP adapters (18 PCS) Multi-Functional Diesel Test Bench For Injection Pumps And CR/EUI EUP/HEUI HEUP System Full function diesel test bench:

technical parameter of the full function diesel test stand:

Function of this diesel test bench

Software advantage of the CRDI test bench

DA-66T Controller:

2D graphical touch screen programming mode 3D visualization in simulation and production Crowning system control 17" high resolution color TFT Date backup/ restore via USB Bending tool/material/product library Full Windows application suite Open system architecture Technical Parameters:

Standard Configurations:

18 BJOA4N4292E735 Delphi Toledo HEUI Master HEUI180-B 1 EA $ - 0 Main specification as follows:- Shared platform with Sabre Cri180 280 Bar and 3 Bar oil supplies Electrical tests (Resistance, Inductance) 10” HD Touch Screen + USB & WIFI connectivity Electronic Delivery measurement Response time Measurement Fully automated test plans All-makes test plans & test plan editor function Test Plan generator Multi-lingual software - 15 languages (in local fonts) Single Phase ‘domestic’ power supplies.

No external Air or Water supply required Electrical and Controls Single PCB solution developed from the IFT-200, HK1400 and Sabre CRi master.

3 phase Motor (1.8KW) and single to 3 phase convertor 12 and 24V PSU User interface is a 10” touchscreen Windows tablet with USB and WIFI.

Hydraulic System Vehicle lift pump 3 bar fuel supply DFP4 CR pump creating 280 Bar intensifier supply Custom rail block with PCV Separate fuel routing from accumulator for top and side feed injectors.

air to oil cooler and 24V Fan 10 liter oil capacity.

Safety Systems Door Interlock High pressure safety valve 280 bar.

Fuel low and Fuel temp cut out > 70 degrees Filtration Front mounted vehicle filters for fuel delivery and intensified oil.

Front mounted metering unit filter (as per cri) Fixturing New Patent Pending fixturing system with unique new features.

Auto connect of services for side feed injectors Partial auto connect for Top feed injectors Clamping method engages and removes test injector.

3-Axis Position Indicator

Standard Equipment

Specifications

Headstock

Grinding headstock

Measures and Weights

Servo motor for quill feed Touchscreen control panel with additional features Infinitely variable speed Motorized table height adjustments Swiveling and rotating setup table Working Area

Drive Capacity

Measures and Weights

Headstock

Key Properties:

Magnetizing Current Capacity at Contacts (amps): 2,000 AC Maximum Clamping Length: 35.4 in / 90 cm Benefits:

Faster part processing:

Double your inspection speed by magnetizing parts in a single shot.

Fully inspect longer parts, up to 35.4 in / 90 cm, without requiring an auxiliary coil.

Speed up part processing with a large automated surface shower.

Advanced process control:

Maximize consistency between tests with 500 customer-programmable techniques.

Prevent accidental and unauthorized alterations with multiple user profiles and varying tiers of control for a range of operator experience levels.

Receive visual alerts when produced amperage is 90% or less than set amperage.

Real-world dependability for minimal downtime:

Siemens PLC provides reliable controls and off-the-shelf replacements.

Minimize downtime with standard spare parts package.

Easy to use and maintain:

Make quick operational adjustments using the simple, user-friendly operator interface with touch-screen controls.

External pump system provides fast access for easy cleaning and service.

Features:

60% duty cycle at 50% power output with a max of 6 seconds on and 4 seconds off.

Large surface shower to bathe entire part automatically with mag shot.

Siemens PLC.

Advanced touch-screen operator interface.

1,000 customer-programmable techniques.

CE certified.

Safety stroke of 7mm to prevent pinch point injuries.

User-controlled security systems with password protection, supervisor locks and customizable operator access profiles.

External pump system for particle bath agitation, circulation and application.

Adjustable mag shot time.

Two large, easy-to-read, digital ammeters confirming amperage sent through the part Dimmable UI display helps reduce operator eye fatigue and keeps ambient light below required minimums.

Current control circuitry maintains the actual current value during magnetization in accordance with the selected value.

Receive visual alerts when produced amperage is 90% or less than set amperage.

Current flow diagnostic system and integrated AC demagnetization for both magnetizing circuits.

Automatic sequencing mode to bathe and magnetize part according to pre-set parameters.

Meets the requirements of ASTM E1444, ASTM E709 and ASTM E3024.

23 3431 BJOA4N4292E741 Miller Electric Mfg. LLC Multiprocessor welding power source XMT 350 CC/CV 907161 3 EA $ - 0 Features:

Standard 14-pin Receptacle:

Has the flexibility to be used with spool guns, feeders, and remote controls.

Auto-Line™ Power Management Technology:

Allows for any input voltage hookup (208-575 VAC, single- or three phase) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable input power.

Advanced features for the professional welder:

Adaptive Hot Start™ makes starting stick electrodes easy without creating an inclusion. Infinite arc control available in the Stick and Wire modes for easier fine tuning of tough-to-weld materials and out-of-position applications. Lift-Arc™ provides arc starting that minimizes contamination of the electrode and without the use of high frequency.

Welder friendly control panel:

Process selector switch reduces the number of control setup combinations without reducing any features. Ultra-tough, polycarbonate-blended cover protects front controls from damage. Large, dual digital meters are easy to view and presettable to ease setting weld output.

Output connector choices:

Dinse- or Tweco®-style weld cable connectors provide high-quality weld cable connections. (Note: Two Dinse connectors are supplied with each Dinse machine. Tweco connectors must be ordered separately.)

Reliability:

Wind Tunnel Technology™ protects internal components, greatly improving reliability. Fan-On-Demand™ cooling system operates only when needed, reducing noise, energy use and amount of contaminants pulled through machine.

Processes:

Air Carbon Arc Cutting and Gouging (CAC-A), Flux Cored (FCAW), MIG (GMAW, Multiprocess, Stick (SMAW), TIG DC (GTAW-DC) Specifications:

Amperage: 15 A - 425 A Weldable Metals: Aluminum, Specialty Metals, Stainless Steel, Steel Input Voltage: 208 V, 220/230/240 V, 380/400/440 V, 460/480 V, 575 V Rated Carbon Diameter: 1/4 in (6.4 mm) Input Phase: 1- and 3-Phase Input Hz: 50/60 Hz Input Amperage: 3 Phase – 208 V (40.4 A), 230 V (36.1 A), 400 V (20.6 A), 460 V (17.8 A), 575 V (14.1 A) Current Type: DC Portability: Handle(s), Running Gear / Cart (Optional) Weld Output: CC / CV Net Width: 20 in Net Height: 16 in Net Length: 26 in Net Weight: 80 lbs 24 3431 BJOA4N4292E742 Miller Electric Mfg. LLC Syncrowave 400 - Complete Package w/ Wired Foot Pedal 951000004 2 EA $ - 0 Features:

Pro-Set Feature (professional settings) This feature eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of pre-set controls. Simply select the feature and adjust until Pro-Set appears on the display. The Pro-Set feature is available for Balance, Frequency, Pulse and DIG parameters.

AC Frequency Control Control the width of the arc cone and can improve directional control of the arc with adjustments between 50-150 Hertz.

Auto-Link Circuit automatically links the power source to primary voltage being applied (208/240/480 V, single- or three-phase).

Specifications:

PROCESSES: Stick (SMAW), TIG (GTAW), TIG AC (GTAW-AC), TIG DC (GTAW-DC) Weldable Metals: Aluminum, Stainless Steel, Steel Input Voltage: 208 V, 220/230/240 V, 460/480 V Input Phase: 1- and 3-Phase Input Hz: 50/60 Hz Current Type: AC / DC Max Open Circuit Voltage: 70 VDC Amperage Min: 5 A Amperage Max: 400 A Rated Output: 300 A at 22 V, 60% duty cycle Portability: Lift Eye (Standard), Running Gear / Cart (Standard) Applications: Aluminum Welding, Welding Projects Net Width: 28.5 in Net Height: 43.875 in Net Length: 36.25 in Net Weight: 211 lbs 25 3220 BJOA4N4292E743 ONEWAY Woodworking Lathe 2436 1 EA $ - 0 Features:

24” swing over the bed; 36” between centers Spindle Thread: M33 x 3.5 RH (inboard and outboard); 5/16” thru hole (in spindle); 6 position spindle lock; 7½° (48 position) indexing; Spindle is the cartridge type and can be pulled fully assembled from the headstock by removing six bolts #2 Morse Taper in headstock; #3 Morse Taper in tailstock 220V input, Single Phase; AC Electronic Variable with built-in ramp up/ramp down and dynamic braking; 3 HP motor; Drive pulleys are 3 step 10 groove poly V (20 - 800/190 - 1900/305 - 3050) 0 - 3000 RPM with Full Speed Reverse; Drive controls are mounted on a swinging pendant which can be moved to the headstock or tailstock for easy and safe reach at all times The Tailstock has an 1½” diameter quill with 4” travel; The lead screw is a ¾” diameter 6 pitch acme thread and the barrel has a 3½” bearing length; Patented clamping mechanism in Banjo Overall Length: 60" Weight: Approximately 850 lbs More Info:

The toolrest is made from ductile iron, it is stronger and lasts longer than cast iron. It is suitable for under and overhanded grips. It is 14” long with a 1” diameter post Drive motor is mounted directly below the headstock in a base housing welded to the bed tube; Lathe runs extremely quiet The spindle nose, which holds the front bearings, protrudes approximately 3” in front of the headstock allowing easy tool maneuvering when working on the backside of a plate or bowl The headstock features a three bearing spindle. At the front, one angular contact bearing is locked to the shaft with a clamp ring and lock nut. This minimizes radial and axial play of the spindle. The rear bearings float axially to allow for heat expansion. All bearings are maintenance free and lubricated for life. It is made from high alloy steel hardened and ground to precision tolerance of ±0.0003” Super rigid Tailstock clamp is designed to eliminate flexing under clamp pressure. This ensures that the clamp holds firmly while requiring no adjustment for the life of the lathe and will retain the ease of movement of the Tailstock along the bed The Banjo is a radical new design that assures even, powerful locking anywhere on the bed. The sliding cam is supported by a cam support block which rests on a ledge machined in the tool rest base Bedways and ribs are welded to a 10¾” dia. by 5/16” wall tube. The assembly is stress relieved and precision machined. Almost perfect torsional rigidity is achieved many times more so than twin tube or cast iron bed designs 26 3431 BJOA4N4292E746 PRODUCTION PRODUCS INC Foot operated spot-welding machine BSM226RF 1 EA $ - 0 Spotwelder Features:

Foot-operated rocker arm resistance spotwelder (manual) Arms adjust 15″ to 29″ Uses standard Morse #1 tapered tips Water-cooled transformer, arms and tip holders 220 1PH electrics Dimensions: 40″L x 12″W x 50″H Weight: 300 lbs. (425 lbs. crated) 25 KVA Capacity: 2 pcs 14 gauge Custom lower arm design allows welding tubes as small as 2″ diameter and no hoses to interfere with parts ProCool II Coolant Recirculator Features:

Plastic water tank eliminates coolant contamination due to electrolysis or chemical reactions All units are plumbed with copper tubing and reinforced hose.

New extended life pump features a direct drive power system reducing maintenance and vibration No external plumbing is required because of closed loop water system Self priming pump Easy change pump Strong rigid construction designed to support power unit Compact design Factory set at 50 psi adjustable to 80 psi 3 gallon reservoir Net weight: 37 lbs / 17 kg

9" x 49" table with 3 T-slots, 5/8”, on 2.5" centers Table travel is 33". Leadscrew pitch is 5TPI with dials on each end graduated in .001".

Travel of crossfeed is 12" with .001" dial graduations Knee travel is 15.74" with 10TPI leadscrew, .001" dial graduations Ram allows for over 12" of travel, for variable throat depth Conventional dovetail ways on X, Y and Z Axis, Double locks on all axis Aged stressed castings, stress relieved for long life and accuracy, Meehanite type Power quill feed allows for 0.0018, 0.003, 0.006 Inches of feed per revolution of spindle Hardened and ground and precisely scraped work table, saddle and knee ways Centralized one-shot lubrication pump lubricates all way surfaces and leadscrews Backlash adjustment for leadscrews, Gib adjustments for ways Electrical cabinet with internal transformer for 110V and 24V devices, circuit breaker protected, Low Voltage controls, 24 volt halogen machine light. Transformer also includes power supply for digital readout and power table feed.

Operator low voltage controls for coolant pump, machine light, main power with emergency stop button. Spindle off/forward/reverse switch.

Built in coolant tank base with coolant pump, pressure and return hose , nozzle and valve, Installed and ready to use. Base chip pan to help prevent coolant overflow.

Manual variable speed spindle drive, 3 Horsepower runs the spindle from 60 to 4200 RPM. Spindle speed dial on head shows RPM in direct drive and back gear. Spindle motor is finned for cooling.

Sino three axis digital readout has 0.0002” resolution. Readout comes mounted to knee, table and cross and is ready to use. The readout is inch/metric switchable, with absolute incremental function. There is a calculator function, bolt hole pattern function, line pattern function, and arc calculate function. A comprehensive manual is included.

Power table feed is Align model AL500SP. Infinitely variable feed from .8 to 32 IPM with rapid button, on/off switch, and adjustable travel stops. This heavy duty power feed has 150 inch pounds of torque, with max to 650. Power table feed comes installed on machine, ready to use Toolbox and tools, manuals, electrical drawing, test certificate all included.

Specifications:

Working Surface: 9" x 49" Longitudinal Travel: 29” with powerfeed (33” without powerfeed) (Powerfeed stops prevent overtravel.)

Cross Travel: 12" (11" with readout installed) Vertical Travel: 15.74" Ram Travel: 12" Head tilt, left to right: 90° left, 90° right with degree ring scale Head Tilt, front to back: 45° front, 45° back with degree ring scale Ram Circular Movement: 360° with degree ring scale T-Slots: 3 @ 2 1/2" centers, 5/8" Ea.

Spindle Drive: 3 HP Spindle Range (Manual Vari-speed sheeve): 60-4200 Variable with Direct Drive and Back-geared Spindle Type: R-8 Quill Travel & Diameter: 5" travel and 3 3/8" diameter Power quill feed range, Inches per rev: 0.0018", 0.003", 0.006" Weight of Work Piece, max: 500 lbs Spindle Motor: 3 HP, 208-240/440/460/480 volt | 3 ph spindle motor Electrics: 208-240V or 440/460/480V, 3 phase Machine Weight: 2,550 lbs 30 3417 BJOA4N4292E750 U.S. Industrial Machinery Variable Speed Milling Machine 3VH-3-KIT 1 EA $ - 0 Standard Equipment:

9" x 49" table with 3 T-slots, 5/8”, on 2.5" centers Table travel is 33". Leadscrew pitch is 5TPI with dials on each end graduated in .001".

Travel of crossfeed is 12" with .001" dial graduations Knee travel is 15.74" with 10TPI leadscrew, .001" dial graduations Ram allows for over 12" of travel, for variable throat depth Conventional dovetail ways on X, Y and Z Axis, Double locks on all axis Aged stressed castings, stress relieved for long life and accuracy, Meehanite type Power quill feed allows for 0.0018, 0.003, 0.006 Inches of feed per revolution of spindle Hardened and ground and precisely scraped work table, saddle and knee ways Centralized one-shot lubrication pump lubricates all way surfaces and leadscrews Backlash adjustment for leadscrews, Gib adjustments for ways Electrical cabinet with internal transformer for 110V and 24V devices, circuit breaker protected, Low Voltage controls, 24 volt halogen machine light. Transformer also includes power supply for digital readout and power table feed.

Operator low voltage controls for coolant pump, machine light, main power with emergency stop button. Spindle off/forward/reverse switch.

Built in coolant tank base with coolant pump, pressure and return hose , nozzle and valve, Installed and ready to use. Base chip pan to help prevent coolant overflow.

Manual variable speed spindle drive, 3 Horsepower runs the spindle from 60 to 4200 RPM. Spindle speed dial on head shows RPM in direct drive and back gear. Spindle motor is finned for cooling.

Sino three axis digital readout has 0.0002” resolution. Readout comes mounted to knee, table and cross and is ready to use. The readout is inch/metric switchable, with absolute incremental function. There is a calculator function, bolt hole pattern function, line pattern function, and arc calculate function. A comprehensive manual is included.

Power table feed is Align model AL500SP. Infinitely variable feed from .8 to 32 IPM with rapid button, on/off switch, and adjustable travel stops. This heavy duty power feed has 150 inch pounds of torque, with max to 650. Power table feed comes installed on machine, ready to use Toolbox and tools, manuals, electrical drawing, test certificate all included.

Specifications:

Working Surface: 9" x 49" Longitudinal Travel: 29” with powerfeed (33” without powerfeed) (Powerfeed stops prevent overtravel.)

Cross Travel: 12" (11" with readout installed) Vertical Travel: 15.74" Ram Travel: 12" Head tilt, left to right: 90° left, 90° right with degree ring scale Head Tilt, front to back: 45° front, 45° back with degree ring scale Ram Circular Movement: 360° with degree ring scale T-Slots: 3 @ 2 1/2" centers, 5/8" Ea.

Spindle Drive: 3 HP Spindle Range (Manual Vari-speed sheeve): 60-4200 Variable with Direct Drive and Back-geared Spindle Type: R-8 Quill Travel & Diameter: 5" travel and 3 3/8" diameter Power quill feed range, Inches per rev: 0.0018", 0.003", 0.006" Weight of Work Piece, max: 500 lbs Spindle Motor: 3 HP, 208-240/440/460/480 volt | 3 ph spindle motor Electrics: 208-240V or 440/460/480V, 3 phase Machine Weight: 2,550 lbs 31 3915 BJOA4N4292E751 ULINE INC Automatic Wrapping Machine H-2957 3 EA $ - 0 Pre-stretches film 230% or 270% for speed and efficiency. Uses up to 80% less stretch wrap than our semi-automatic machine.

Wraps pallets tightly without damage, including light and irregular loads.

Wraps approximately 30 loads per hour – 12 RPM variable speed turntable.

Two wrap modes – Select spiral up and down or spiral up only.

Convenient photo eye – Allows operator to walk away.

Automatically cuts film at end of wrap cycle.

Side mounted carriage with fast film feed.

115 volt, 15 amp.

Sorry, no returns accepted on this item.

Use with 20" wide Machine Length Stretch Wrap.

MAX. SKID SIZE: 52 x 52 x 80" LOAD CAPACITY: 4,000 lbs

ROLL WIDTH: 20'

Shipping Weight: 1,350 lbs

Delivery Order Estimated Total $ - 0

Lines COST 1-4

1725 rpm, 110 volt-60hz sanding belt motor 6″ – 3 jaw chuck Separate safety switches for Lathe and Sanding Belt motors Accepts 72″ belts, 5/8″ to 2″ widths Aircraft aluminum belt drive and idlers pulleys Integral belt guard for your safety Spring loaded arm for ease of belt changes Foot operate, spring loaded, locking, live center release Adjustable center Adjustable taper Cam can be mounted without removing gear Heavy duty design Foot anchors on each leg Contact wheels available – 3/4″, 7/8″, 1″, 1-1/8″

Built with hydraulic motors driving planetary gearboxes.

½” mild steel capacity and 120” (10-foot) length Large 10 hp motor runs on 480-volt 3-phase power and includes conical bending system All 4 forming rolls are hardened and polished with 2 central driven rolls Dual hydraulic motors and high-efficiency planetary gearboxes directly rotate the 2 driven rolls Front rolls have independent hydraulic lifters that go in the orbital pattern Stabilizer torsion bar system keeps front rolls parallel to the top roll Plate is always pinched during the rolling cycle, so there’s no chance to lose the position Conveniently movable operator console with control panel and toggles on the console make it simple to control the roll movement 2 DROs on the control panel show the front and back roll positions for repeatability Hydraulic system for material removal: yoke on top roll drops, allowing the roll to lift Specifications:

Maximum Forming Length: 122 in.

Motor (HP): 10 HP 3 ~ 480V Weight: 17,600 lbs

Controls: Push button and switch controls are at your fingertips. The fully guarded, 2-position 110v footswitch lets you interrupt the cutting stroke at any point in its cycle.

Easy Material Handling: A sturdy backgauge and rake angle adjustment minimizes twist and distortion. This makes it possible to increase the rake for cutting heavier stock and extend maximum capacity of the machine. A 4' squaring arm with a recessed scale makes for fast, easy measurement.

Single Piece Top and Bottom, High Carbon, High Chrome Shock Resistant Knives: Provide four separate edges for clean cuts and long blade life. Easy blade gap adjustment means precise cuts for a wide variety of materials.

Electrical System: Meets NFPA 79 and construction requirements of the ANSI B11.4. All machines have disconnect switches magnetic starters, 110/120v controls, and 208-230/460v 3 phase, others optional.

Backgauges: A Betenbender Shear is capable of shearing 1/8" (10 GA) material to the following tolerance: Dimension - The width of the off-cut portion of the workpiece is within ±0.005 inch of the backgauge setting.

Specifications:

Knives: 1x3 Motor: 10 hp, 230 Volt, Three Phase Weight (May Vary): 6,700 lbs Overall Length: 97" Overall Height: 55" Table Height: 32" Anchor Bolt Dimension/Length: 76" Anchor Bolt Dimension/Width: 36" End Plate Width: 30" Machine with Backgauge: 74" Squaring Arm Length, 4' Std: 30" Knife Length: 76" Rake Angle per Rated Capacity: 1/4" Strokes per Minute: 35" Number of Hold-down Pins: 13" 36" Power Backgauge with LED Readout Inch / Metric.

4' Squaring Arm with Inlaid Scale All Hydraulic Fluids Included All Steel Construction American Made Hoses and Fittings American Made Motor and Valves Disconnect Switch Hour Meter Hydraulic Pressure: 2500 psi Hydraulic Self-Compensating Hold-down Bar Assembly Light Beam Gauge (Shadow Line) Linemaster Foot Switch Manual Rapid Blade Gap Adjustment (3/8" and…