Contract Criteria Attachment 1 CLIN 0001.pdf

This is a contract document (FSC 5305) establishing specifications for Socket Head Cap Screws under contract SPMYM326Q1137.

The contract specifies the procurement of Socket Head Cap Screws (Stock Number 5305-LL-D00-0230) manufactured to FF-S-86 standards. The screws must meet specific technical requirements including Type VI material, 0.4375-20UNF-3A X 2.000 dimensions, nickel-plated finish with QQ-N-286G coating, annealed and age hardened construction, and drilling capability for lockwire installation per FF-S-86 Table 1. The specification notes that earlier FF-S-86 revisions are acceptable if proper certifications exist, and material that has been headed or roll threaded cannot be age hardened unless solution annealed after these operations; threads formed after final age hardening must be cut or ground only. The contract references compliance documentation including Certificate of Compliance (CDRL DI-MISC-81356A) and Certification/Data Report (CDRL DI-MISC-80678). Standard clauses apply including PNS Standard Clauses C500 (Mercury Exclusion), C524 (Marking & Certification Requirements), and C531 (Restrictions on K-Monel Material). Commercial packaging standards apply, and inspection requirements per FAR 52.246-1, with acceptance at destination and constructive acceptance provisions. The material is classified as non-Level-1 and Special Provisions for Threaded Products (Standard Clause H500) apply to this procurement.