Consolidated Solvent Service PWS.pdf

PERFORMANCE WORK STATEMENT (PWS)

Solvent Tank Cleaning Service

PART 1

GENERAL INFORMATION

1. GENERAL: This is a non-personal services contract to provide Solvent Tank Cleaning Service compliance support services. The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government.

1.1 Description of Services/Introduction: The Contractor shall provide all personnel, equipment, supplies, transportation, tools, materials, supervision, and other items and non-personal services necessary to support services for the Solvent Tank Cleaning Service Program and Installation programs as defined in this Performance Work Statement (PWS). The Contractor shall perform to the standards in this contract.

1.2 Background: Solvent degreasing is a process used to clean equipment such as weapons. Typically the solution is petroleum, chlorine, or alcohol based solvent mixture used for the purpose of dissolving machining fluids and other contaminants.

1.3 Objectives: To provide clean solvent solutions in order to clean and degrease weapons in support of Infantry Basic Officer Leader (IBOLC) and Officer Candidate School (OCS) training mission. The solvent service will ensure weapons used for training are properly cleaned and that the coating of the weapon will be preserved.

1.4 Scope: The United States Government has a requirement for Solvent Tank Cleaning Service at Fort Benning, Georgia. The Contractor shall provide technical and administrative assistance to Fort Benning’s solvent tanks that are government owned.

The solvent solution type is MIL-PRF-680. Service, cleaning and repair is expected to take place on an as needed basis as requested by the Contract Officer Representative

(COR).

1.5 Period of Performance: The period of performance shall be for 12 months. The Period of Performance is 9 May 2022 thru 8 May 2023.

1.6 General Information

1.6.1 Federal Observed Holidays: The Contractor is not required to provide services on

Federal Holidays.

New Year’s Day Labor Day Martin Luther King Jr.’s Birthday Columbus Day

President’s Day Veteran’s Day Memorial Day Thanksgiving Day Independence Day Christmas Day Juneteenth

1.6.2 Hours of Operation: The Contractor is responsible for conducting business during the working hours between 8 am and 5 pm. The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed.

1.6.3 Place of Performance: The work to be performed under this contract will be performed at two locations (1) IBOLC – Main Post, BLDG 260; Qty 9 Tanks and (2) OCS – Main Post, BLDG 75/83; Qty 10 Tanks.

1.6.4 Quality Control Program (QCP): The Contractor shall develop and maintain an effective QCP to ensure services are performed in accordance with (IAW) this PWS.

The QCP must be forwarded to and accepted by the Contracting Officer (KO). The Contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of deficiencies. The Contractor’s QCP is the means by which the Contractor assures that the work complies with the requirement of the contract. The QCP is to be delivered within 30 days after contract award OR with the Contractor’s proposal if it is an evaluation factor, three paper copies and one electronic copy of a comprehensive written QCP shall be submitted to the KO and COR within 5 working days when changes are made thereafter. After acceptance of the QCP the Contractor shall receive the contracting officer’s acceptance in writing of any proposed change to the QCP.

1.6.5 Quality Assurance: The government shall evaluate the contractor's performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP).

This plan is primarily focused on what the Government must do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum acceptable defect rate(s).

1.6.6 Type of Contract: The Government will award a Firm Fixed Price.

Contractor personnel performing work will need at the minimum a local background check conducted by local law enforcement officials and a favorable National Agency Check (NACI) or equivalent in accordance with Army Directive 2014-05.

1.6.7 Physical Security: The contractor shall be responsible for safeguarding all government property provided for contractor use. At the close of each work period, government facilities, equipment, and materials shall be secured.

1.6.8 Contracting Officer’s Representative (COR): The COR Management System Tool for nomination, tracking, documentation, and management of CORs will be used;

(Virtual Contracting Enterprise (VCE)-Acquisition Resource Center (ARC) https://arc.army.mil/COR). The COR will be identified by separate letter. The COR shall monitor all technical aspects of the contract and assist in contract administration. The COR is authorized to perform the following functions: assure the contractor performs the technical requirements of the contract; perform inspections necessary in connection with contract performance; maintain written and oral communications with the contractor concerning technical aspects of the contract; issue written interpretations of technical requirements, monitor contractor’s performance and notify both the Contracting Officer and contractor of any deficiencies and provide site-entry for contractor personnel. A letter of designation will be issued to the COR, a copy of which will be sent to the contractor detailing the responsibilities and limitations of the COR. The COR is not authorized to change any of the terms and conditions of the contract.

1.6.9 Contract Management: The contractor shall manage the contract or shall provide a contract manager who shall be responsible for the performance of the work. The name of this person and an alternate who shall act for the contractor during absences shall be designated in writing and provided to the Contracting Officer. The contract manager or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract.

1.6.10 Identification of Contractor Employees: The contractors shall wear identifying name tags or equivalent and ensure all documents or reports produced by the contractor are suitably marked as contractor products or that contractor participation is appropriately disclosed.

1.6.11 Contractor Travel: The contractors conducting the tasks outlined in the PWS are expected to work on-site at Ft. Benning throughout the performance period.

1.6.12 Contractor Personnel Conduct: Contractor personnel’s conduct shall not reflect discredit upon the Government. The Contractor shall ensure that personnel present a professional appearance. The Contractor’s employees shall observe and comply with all local policies and procedures concerning fire, safety, environmental protection, sanitation, security, and possession of firearms or other lethal or illegal weapons or substance. The Contractor is responsible for ensuring that any contractor employees providing services under this contract conduct themselves and perform services in a professional, safe, and responsible manner. The Contractor shall remove from the job site any employee for reasons of misconduct or security. The Contractor shall ensure employee conduct complies with 41 U.S.C. §423 relative to release of acquisition related information or actions or discussions which may prejudice future competitions.

The Contractor shall ensure no contractor employees conduct political related activities or events on the US Army Facilities.

1.6.13 Emergency Services: The Contractor shall have competent personnel trained and capable of dealing with minor personnel injuries. The Contractor or their employees shall immediately notify their supervisor of any accident requiring emergency medical treatment. The Contractor will, in turn, notify the KO or COR within 30 minutes of the incident. Emergency medical treatment and services for Contractor personnel is the responsibility of the Contractor.

1.6.14 Post Award Conference: A Post Award conference/Early integration Meeting shall be held with the Government and the Contractor either at the delivery sites, or via teleconference ten (10) days after award of the contract. The conference shall introduce the participants, identify points of contact, and discuss both parties understanding of the scope of work and other contract issues.

1.6.15 Data Rights: The Government has unlimited rights to all documents/material produced under this contract. All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the contractor without written permission from the KO. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

1.6.16 Organizational Conflict of Interest: Contractor and subcontractor personnel performing work under this contract may receive, have access to, or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.), or perform evaluation services which may create a current or subsequent Organizational Conflict of Interests (OCI) as defined in FAR Subpart 9.5. The Contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI. The Contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the KO, and in the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may affect other remedies as he or she deems necessary, including prohibiting the Contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.6.17 Antiterrorism (AT) and Operations Security (OPSEC): The contractor shall adhere to the Government's Operations Security (OPSEC) Standard Operating Procedure (SOP)/Plan during the entire period of performance.

1.6.18 AT Level I Training: All contractor employees, to include subcontractor employees, requiring access to Army installations, facilities and controlled access areas shall complete AT level I awareness training within 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever is applicable. The contractor shall submit certificates of completion for each affected contractor employee and subcontractor employee, to the COR or the contracting officer, if a COR is not assigned within 30 calendar days after completion of training by all employees and subcontractor personnel. AT level I awareness training is available at the following website: https://jkodirect.jten.mil. AT level I training is an annual requirement if option years are exercised.

1.6.18.1 Access and General Protection/Security Policy and Procedures: Contractor and all associated sub-contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by the government representative). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by Installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.

1.6.18.2 For contractors requiring Common Access Card (CAC): Before CAC issuance, the contractor employee requires, at a minimum, a favorably adjudicated National Agency Check with Inquiries (NACI) or an equivalent or higher investigation in accordance with Army Directive 2014-05. The contractor employee will be issued a CAC only if duties involve one of the following: (1) Both physical access to a DoD facility and access, via logon, to DoD networks on-site or remotely; (2) Remote access, via logon, to a DoD network using DoD-approved remote access procedures; or (3) Physical access to multiple DoD facilities or multiple non-DoD federally controlled facilities on behalf of the DoD on a recurring basis for a period of 6 months or more. At the discretion of the sponsoring activity, an initial CAC may be issued based on a favorable review of the FBI fingerprint check and a successfully scheduled NACI at the Office of Personnel Management.

1.6.18.3 AT Awareness Training for Contractor Personnel Traveling Overseas: N/A..

1.6.18.4 For Contracts that Require an OPSEC Standing Operating Procedure (SOP)/Plan: The contractor shall adhere to the Government's Operations Security (OPSEC) Standard Operating Procedure (SOP)/Plan during the entire period of performance.

1.6.18.5 For Contracts that Require OPSEC Training: In accordance with AR 530-1 all personnel, to include contractor employees and associated sub-contractor employees must complete Level I Operations Security (OPSEC) training which is composed of both initial and continual awareness training (annually). All personnel within the first 30 days of arrival in the organization must receive initial training to include a briefing on the organizations critical information read/sign the OPSEC Individual User Compliance Agreement form. The end state of initial and continual awareness training is that each individual should have the requisite knowledge to safeguard critical information

1.7 Background Check Requirements: Contractor/Sub-Contractor employees providing services under contracts are subject to the following process:

1.7.1 Each employee (direct employee and sub-contractor employee) working under this contract who has contact with children under 18 years of age, shall be screened with the appropriate background checks as governed by the Army Directive 2014-23 “Conduct of Screening and Background Checks For Individuals Who Have Regular Contact With Children in Army Programs”, dated 10 September 2014. A copy of the Army Directive can be found at http://www.apd.army.mil/pdffiles/ad2014_23.pdf. The background check requirements for Contractors can be found in Enclosure 3 – Screening and background checks for appropriated and non-appropriated fund personnel, military personnel, foreign national employees overseas, and contractors.

1.7.2 Background checks will be initiated and paid for by the Government. The cost for the pre-employment screening is the responsibility of the Contractor. The Commander Designated Entity (CDE) at the Installation supports Installation Management Command (IMCOM) by coordinating, submitting, tracking child related background checks, and reviewing and compiling the results to identify whether they contain derogatory information to be passed on for a suitability determination. The CDE will advise and assist the contractor and sub- contractor employees in completing all required documents required for the background check process. CDE contact information will be provided upon contract award.

1.7.3 The following is a list of the required screenings per the Army Directive 2014-23.

1.7.3(a) REGULAR/RECURRING contact with children:

Definition: Contact with children more than an average of one (1) day a week for three

(3) or more months OR daily for a period of one (1) month or longer.

Required screening:

i) Pre-employment screening: 1) Application, 2) Interview, 3) Reference check, 4) Statement of Previous Arrest or Charge, 5) Assessment of individual’s eligibility, qualifications, temperament and suitability for work with children, 6) Tentative offer of employment (Proponent: Contractor is responsible organization);

ii) Preliminary investigation: 1) Installation Record Check (if applicable), 2) FBI Fingerprint check, and 3) Local Civilian Law Enforcement Check (Proponent:

Government/Commander Designated Entity is responsible organization);

iii) CNACI – Child Care National Agency Check and Inquiries (Proponent:

Government/Commander Designated Entity is responsible organization).

The CNACI will be initiated after successful completion of the preliminary investigation (1.3(a)(ii)). If deemed appropriate by the local Garrison Commander, a contractor can start working under Line of Sight Supervision (LOSS) after successfully completing the preliminary investigation (1.3(a)(ii)). If LOSS is not feasible, favorable CNACI (1.3(a)(iii) results are required BEFORE the contractor can start working under this contract.

1.7.3(b) SHORT TERM OCCASIONAL contact with children:

Definition: Contact with children that does not fall under the definition of Regular/Recurring contact.

Required Screening:

i) Pre-employment screening: 1) Application, 2) Interview, 3) Reference check, 4) Statement of Previous Arrest or Charge, 5) Assessment of individual’s eligibility, qualifications, temperament and suitability for work with children, 6)Tentative offer of employment (Proponent: Contractor is responsible organization);

ii) Preliminary investigation: 1) Installation Record Check (if applicable), 2) FBI Fingerprint check, and 3) Local Civilian Law Enforcement Check (Proponent:

Government/Commander Designated Entity is responsible organization);

An employee must successfully complete the required screening (1.3(b)(i) and (ii) BEFORE working under this contract.

1.7.4. No person, regardless of circumstances, will be approved to provide child care services if the individual has been convicted of a sexual offense, a drug felony, a violent crime or a criminal offense involving a child. If the background check investigation reveals any other derogatory information a suitability determination has to be made by the Army. The adjudication of derogatory information is processed through an Army Program Review Board (PRB). Further details about the adjudication process can be found in Enclosure 6 of the AD 2014-23. At any time a Contractor can decide not to proceed with the PRB process.

1.7.5 Additional information on the background check process can be found at:

http://www.opm.gov/investigations/background-investigations.

1.7.6 Re-verification (IRC and FBI fingerprint check) is required every 5 years.

1.8 Contractor Manpower Reporting Application (CMRA): The Office of the Assistant Secretary of the Army (Manpower & Reserve Affairs) operates and maintains a secure Army data collection site where the Contractor shall report ALL Contractor manpower (including subcontractor manpower) required for performance of this contract. The Contractor shall completely fill in all the information in the format using the following web address https://Contractormanpower.army.pentagon.mil. The required information includes: (1) Contracting Office, Contracting Officer, Contracting Officer’s Technical Representative (COTR) or also known as the Contracting Officer’s Representative (COR); (2) Contract number, including task and delivery order number; (3) Beginning and ending dates covered by reporting period; (4) Contractor's name, address, phone number, e-mail address, identity of Contractor employee entering data; (5) Estimated http://www.opm.gov/investigations/background-investigations direct labor hours (including sub-Contractors); (6) Estimated direct labor dollars paid this reporting period (including sub-Contractors); (7) Total payments (including sub- Contractors); (8) Predominant Federal Service Code (FSC) reflecting services provided by Contractor (and separate predominant FSC for each sub-Contractor if different); (9) Estimated data collection cost; (10) Organizational title associated with the Unit Identification Code (UIC) for the Army Requiring Activity (the Army Requiring Activity is responsible for providing the Contractor with its UIC for the purposes of reporting this information); (11) Locations where Contractor and sub- Contractors perform the work (specified by zip code in the United States and nearest city, country, when in an overseas location, using standardized nomenclature provided on website); (12) Presence of deployment or contingency contract language; and (13) Number of Contractor and sub-Contractor employees deployed in theater this reporting period (by country). As part of its submission, the Contractor shall provide the estimated total cost (if any) incurred to comply with this reporting requirement. Reporting period shall be the period of performance not to exceed 12 months ending September 30 of each government fiscal year and must be reported by 31 October of each calendar year.

Contractors may use a direct XML data transfer to the database server or fill in the fields on the website. The XML direct transfer is a format for transferring files from a Contractor’s system to the secure website without the need for separate data entries for each required data element at the website. The specific formats for the XML direct transfer may be downloaded from the website.

PART 2

DEFINITIONS, ACRONYMS, AND ABBREVIATIONS

2. DEFINITIONS AND ACRONYMS:

2.1 Definitions:

2.1.1 Contractor. A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.

2.1.2 Contracting Officer (KO). A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.3 Contracting Officer’s Representative (COR). An employee of the U.S.

Government appointed by the contracting officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations.

This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

2.1.4 Deliverable. Anything that can be physically delivered, but may include non-manufactured things such as meeting minutes or reports.

2.1.5 Equipment. A tangible item that is functionally complete for its intended purpose, durable, nonexpendable, and needed for the performance of a contract. Equipment is not intended for sale, and does not ordinarily lose its identity or become a component part of another article when put into use. Equipment does not include material, real property, special test equipment or special tooling.

2.1.6 Government Furnished Property. Property in the possession of, or directly acquired by, the Government and subsequently furnished to the contractor for performance of a contract. Government- furnished property includes, but is not limited to, spares and property furnished for repair, maintenance, overhaul, or modification.

Government-furnished property also includes contractor-acquired property if the contractor-acquired property is a deliverable under a cost contract when accepted by the Government for continued use under the contract.

2.1.7 Government Property. All property owned or leased by the Government.

Government property includes both Government-furnished property and contractor-acquired property. Government property includes material, equipment, special tooling, special test equipment, and real property. Government property does not include intellectual property and software.]

2.1.8 Material. Property that may be consumed or expended during the performance of a contract, component parts of a higher assembly, or items that lose their individual identity through incorporation into an end-item. Material does not include equipment, special tooling, and special test equipment or real property.

2.1.9 Non-Personal Services. The personnel rendering the services are not subject, either by the contract’s terms or by the manner of its administration, to the supervision and control usually prevailing in relationships between the government and its employees. Non personal service contracts are authorized by the government in accordance with FAR 37.012, under general contracting authority, and do not require specific statutory authorization.

2.1.10 Physical Security. Actions that prevent the loss or damage of Government property.

2.1.11 Property. All tangible property, both real and personal.

2.1.12 Quality Assurance. The government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.13 Quality Assurance Surveillance Plan. An organized document written by the government specifying the surveillance methodology used for surveillance of contractor performance.

2.1.14 Quality Control. All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

2.1.15 Subcontractor. One that enters into a contract with a prime contractor. The Government does not have privacy of contract with the subcontractor.

2.1.16 Work Day. The number of hours per day the Contractor provides services in accordance with the contract.

2.1.17 Work Week. Monday through Friday, unless specified otherwise.

2.2 Acronyms:

AR Army Regulation AT Antiterrorism AOR Area of Responsibility CAP Contractor Acquired Property CFR Code of Federal Regulations COR Contracting Officer Representative DA Department of the Army DoD Department of Defense GFP Government-Furnished Property HQDA Head Quarter Department of the Army IAW In Accordance With KO Contracting Officer

OCI Organizational Conflict of Interest ODC Other Direct Costs POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QAP Quality Assurance Program QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program SOP Standing Operating Procedure TE Technical Exhibit

2.2.1 Environmental Acronyms

ASP Activity Specific Plan BMP Best Management Practices BSC Bulk Storage Containers CBMPP Construction Best Management Practice Plan CFR Code of Federal Regulations DPW Directorate of Public Works EESOH-MIS Enterprise Environmental, Safety and Occupational Health – Management Information System EMD Environmental Management Division EPD Environmental Protection Division ESPCP Erosion Sediment Pollution Control Plan FDEP Florida Department of Environmental Protection GA Georgia GAG Georgia General GI Green Infrastructure GIS Geographic Information Systems GSWCC Georgia Soil and Water Conservation Commission IDDE Illicit Discharge Detection and Elimination ISCP Installation Spill Contingency Plan IWP Impaired Water Plans LDA Land Disturbance Activity LID Low Impact Development MCM Minimum Control Measure MS4 Municipal Separate Storm Sewer System (MS4) NOI Notice of Intent NOV Notice of Violation NPDES National Pollutant Discharge Elimination System Permit (NPDES) OSHA Occupational Safety and Health Administration OWS Oil/Water Separators SMP Surface Mining Permit SPCC Spill Prevention Control and Countermeasure (SPCC) SWMP Strom Water Management Plan

SWP3 Storm Water Pollution Prevention Plan UST Underground Storage Tanks

PART 3

GOVERNMENT FURNISHED ITEMS AND SERVICES

3. General:

3.1 Facilities: The contractor will have accompanied access to BLDG 260; Qty 4 Tanks (IBOLC) and BLDG 75; Qty 2 Tanks and BLDG 83; QTY 2 Tanks (OCS) on Fort Benning.

3.2 Utilities: The contractor can utilize the power outlets in the area of the work if needed to perform the work

3.3 Equipment: The government will provide access to its solvent tanks to the contactor for performance of this contract; capacity of 42-55 gallons.

3.4 Materials: NONE

PART 4

CONTRACTOR FURNISHED ITEMS AND SERVICES

4. General: The Contractor shall furnish all supplies, equipment, facilities and services required to perform work under this contract that are not listed under Part 3 of this PWS.

4.1. Materials: The contractor will provide all solutions and materials required to conduct servicing of the Solvent Tank Cleaning.

4.2 Equipment: The contractor will provide all equipment required to perform the services outlined in this PWS.

PART 5

SPECIFIC SERVICES

5.0 Basic Services: On-Site Servicing Preparation - The Contractor shall perform all the tasks to provide servicing of the Solvent Tanks necessary to prepare and complete testing of solvent waste IAW Department of Public Works (DPW) requirements which follow the standard of Georgia EPA regulations, OCGA 12-14-1.

5.1 Routine Services:

5.1.1 Solvent Tank Cleaning and Servicing: Solvent tanks get serviced two (2) times per year. The Contractor will provide all solutions and materials required to conduct the cleaning for (1) IBOLC – Main Post, BLDG 260; Qty 9 Tanks and (2) OCS – Main Post, BLDG 75/83; Qty 10 Tanks.

5.1.2 Solvent Disposal: The contractor will prepare all waste labels to correctly identify drums being turned in for disposal IAW Fort Benning Environmental Policies and Georgia Environment Protection Division. Contractor will prepare manifest documents (EPA Form 8700-22) and land disposal restriction notice for transport to an approved environmentally compliant disposal facility.

Contractor shall test solvent to determine if it is an EPA Hazardous waste.

6 Environmental Requirements: All spent solvent will be tested by the Contractor to determine if it is an EPA hazardous waste.

6.1.1 Site Cleanup: The Contractor shall be responsible for all cleanup sites when conducting services on solvent tanks. Maintenance and sustainment will be performed IAW with both federal and state environmental procedures.

6.1.2 Solvent Tank Repair: Contractor is responsible for all labor, maintenance and repairs for all solvent tanks quarterly or when contacted by the COR.

Contractor shall schedule and conduct repairs in a way that minimizes impact to daily operations.

6.1.3 Damage or Accident Reporting: Any damage or accidents shall be reported to the on-site COR as soon as possible upon occurrence, but not later than the next business day.

6.2 Emergency Services and Repair: Contractor will provide 24 hour emergency on call service in case of a hazmat spill. The contractor will repair of the solvent tank to prevent further environmental impact. Emergency calls shall only come from the

COR.

6.3 Operations and Maintenance Manual: The Contractor shall provide an O & M Manual to the government, which includes: solvent cleaning operations, troubleshooting procedures, parts lists, ordering catalog, POC information, and maintenance instructions. A listing of approved system components shall be developed in the manual delivered by the Contractor. The manual will delivered to the COR with updates required throughout the contract term.

The Manual shall include:

-Introduction and Leading Particulars -Introduction and Contents -Summary of systems cleaning procedures -Operation -Preventive Maintenance Checks and Services (PMCS) -Troubleshooting procedures -General inspection and maintenance -Parts ordering catalog -The O & M Manual will be delivered before final Government inspection and acceptance.

5.4 Warranty: The Contractor shall warrant all servicing of solvent tanks for (1) year.

The servicing shall include replacement of solution when evidence of not providing the required results of cleaning as required by the OSHA technical manual for the solvent tanks. The contractor shall provide all Point of Contact (POC) information for maintenance instructions, or warranty claims.

PART 6

APPLICABLE PUBLICATIONS

6.0 General: This list is not exhaustive.

6.1 Federal, State, and Local Statutes, Regulations, and Rules:

6.1.1 EPA Hazardous Waste Regulations:

Ref. https://www.epa.gov/rcra/resource-conservation-and-recovery-act-rcra-regulations

6.1.2 OSHA Technical Manual For Solvent Tanks:

Ref. www.osha.gov

6.1.3 Uniform Hazardous Waste Manifest EPA Form 8700-22

6.2 Fort Benning Rules and Regulations:

6.2.1 Directorate of Public Works Environmental Branch Rules

6.3 Industry and Manufacturing Standards and Manuals:

6.3.1 Solvent Tank Manufacturer’s Manual/Specifications:

6.3.1.1 Ref: Inland technology, model IT-48WC, https://inlandtech.com,manuals will be provided upon award, if in government possession.

https://inlandtech.com,manuals/

PART 7

TECHNICAL EXHIBITS

None