CON26-0049_Attachment_1_Alta_Plaza_CPA.pdf

CON26-0049: SF PLAYGROUND CPA REPAIR PROJECT ATTACHMENT 1

CONSTRUCTION NOTES:

FENCE OFF AREA AND REPLACE POUR IN PLACE

SAFETY SURFACE AT UPPER TERRACE. REPLACE

POUR IN PLACE SAFETY SURFACE WITH TOT TURF AT

LOWER TERRACE.

INSTALL 3/4” LAYER OF TPV SUPREME POUR-IN-PLACE

AT HIGH USE AREAS: UNDER SWINGS, SLIDES, AND

OTHER HIGH USE ZONES. MINIMUM SIZING:

COLOR TO BE 75% SAGE GREEN & 25% BEIGE UNLESS

OTHERWISE NOTED.

VERIFY EXACT LOCATIONS AND SHAPES WITH CITY

REPRESENTATIVE PRIOR TO INSTALLATION.

~11,500 s.f.

Safety Surface Total Area

NOTE: CONTRACTOR SHALL BE RESPONSIBLE TO

VERIFY FALL HEIGHT AND USE ZONE OF EACH PIECE

OF EQUIPMENT PRIOR TO INSTALLATION OF SAFETY

SURFACING.

ALTA PLAZA

PLAYGROUND

Scott St. & Washington St.

6’ TEMP.CONSTRUCTION FENCING (~580 lf)

LEGEND:

SEE ATTACHED SAFTEY SURFACE SPECS.

SEE ATTACHED FOR TYPICAL SAFETY SURFACE

DETAILS.

P.I.P. AT HIGH USE ZONE, TYP.

EXISTING SEATWALL TO REMAIN

REPLACE PLAY STRUCTURE, SEE SPECS.

REMOVE AND REGRADE EXISTING SAND

PIT TO MAKE FLUSH WITH ADJACENT

SYNTHETIC TURF, TYP.

SYNTHETIC TURF SURFACING SYSTEM, TYP.

REPLACE (2) COLUMBIA CASCADE PIECES

Figure 1.0: Alta Plaza Playground

~580 LF

CON26-0049: SF PLAYGROUND CPA REPAIR PROJECT ATTACHMENT 1 Figure 2.0: Existing Condition Photos

E: Existing Swing Set F: Existing Structure to be Removed & ReplacedD: Existing Spinner

B:Replace Sand pit with Flush Synthetic Turf; Tile Seatwall to Remain C: Existing Play Equipment to RemainA: Replace Sand Pit with Flush Synthetic Turf

CON26-0049: SF PLAYGROUND CPA REPAIR PROJECT ATTACHMENT 1 Figure 3.0: Existing Condition Photos

C: Replace Existing Part

B: Replace Existing PartA: Existing Play Equipment to Remain - Replace Railings per Specs

A. The safety surface layout and design as shown on the Plans are based on products currently available from the manufacturers listed below. Products of other manufacturers will be considered, if equal, provided that the Contractor shall be responsible for extra costs or delays associated with making necessary changes in design or layout to accommodate the proposed substitutions.

B. Provide safety surfacing as follows or approved equal:

1. Poured-in-Place Safety Surface

A. Mfr: Robertson Recreational Surfaces, www.totturf.com or Approved equal

Product: Tot Turf Supreme or Approved equal

PH: (800) 858-0519

a. Poured-in-place safety surface shall be of variable thickness to attenuate the impact from the fall heights as required by the play equipment manufacturer.

b. Poured-in-place primer shall be a single component moisture cured polyurethane primer.

c. Poured-in-place binder shall be an elastic polyurethane pre-polymer with minimal odor, excellent weathering and binding characteristics. Binder shall be 100% MDI based and contain 0% TDI monomers.

d. Cushion Layer -Poured-in-place black SBR shall be 100% recycled SBR rubber. It shall be ground at ambient temperature into 3/8” maximum shredded strands and contain less than 4% dust. It shall be transported in suitable bags to protect from moisture.

e. Wear Course - shall consist of Thermal Plastic Vulcanized (TPV – Thermal Supreme) product (UV stable colors) with an aliphatic binder.

Install 3/4 inch thick layer. See Drawings. The wear course shall be formulated to produce an even, uniform and seamless surface.

f. Poured-in-place system shall have been tested for shock attenuation under ASTM F 1292 G-Max and HIC. It shall be non-slip and porous. It shall have Class B fire rating .

g. Material density is a minimum 2.71 pounds of material per square foot with a minimum ½” nominal thickness of colored material (wear course) on top layer.

h. Tested and approved to meet American Disabilities Act and ASTM F- 1951-99.

i. Manufacturer must be IPEMA certified.

j. Colors and thickness as specified per Drawings.

k. Aggregate Base: All aggregate shall be a homogenous mix of fine and medium stone, in accordance with Section 205.02 of the Standard Specifications. The particle size distribution to be a grading specified for 3/4 inch maximum size aggregate. Compaction: 95% Standard Proctor Compaction (as per ASTM test).

A. Synthetic Turf:

1. Playground Synthetic Turf:

a. Tot Turf Synthetic Grass, Proplay Elite 929, no known equal

Synthetic Turf- 1.25” Pile Height, 87 oz/yd2 total fabric weight, Color: Field with Forest/Olive Thatch, consisting of Polyethylene Monofilament Classic Spine/ Texturized Polypropylene with primary and secondary backing, UV resistant.

Mfr: Robertson Recreational Surfaces, www.totturf.com

PH: (800) 858-0519.

B. Infill Material: The Infill materials shall be approved by the Manufacturer.

1. Playground Infill Material:

a. The Infill at the playground shall consist of a 0.75” uniform layer of Pure

Cork, 12/20 mesh.

Figure 4.0

SAFETY SURFACING SPECIFICATIONS:

MIN 6” OVERLAP

SEAM TAPE

-GLUED TO BUFFINGS AT

PIP / TURF CONNECTION

1/2” INDENT AT PIP/ TURF

CONNECTION

Figure 5.0

PURE CORK

CON26-0049: SF PLAYGROUND CPA REPAIR PROJECT ATTACHMENT 1 Figure 6.0

This attractive play structure will inspire young children to play actively, using their muscles to climb to the top, slide to the ground, and loop around to start again. The playnet has large holes to climb through or take a break in. The distance between the rungs makes the net a true climbing experience and thus helps support the development of muscles and cross-coordination. It further stimulates cross-modal perception, the cooperation of left and right brain half that makes reading possible. The size of the play unit allows for meeting points, stimulating social skills. The curly climber and slide are thrilling and trains the sense of balance and posture, fundamental skills for navigating the world securely. The sand crane is worked by pulling the chain. The negotiation and cooperation to get sand to and from the funnel via the bucket is great for children and develops social-emotional skills.

Data is subject to change without prior notice.1 / 11/27/2025

3 3 6 1

1 1 1 9

1 8 4

Double Tower with Sand Play

PCM202631

Item no. PCM202631-0901

General Product Information

Dimensions LxWxH 25'9"x9'2"x9'2"

Age group 2 - 5

Play capacity (users) 24

Color options n n n n n n n

CON26-0049: SF PLAYGROUND CPA REPAIR PROJECT ATTACHMENT 1 Figure 6.1 Data is subject to change without prior notice.2 / 11/27/2025

Double Tower with Sand Play

PCM202631

Pipe climber

Physical: muscle strength, cross coordination, and spatial awareness when climbing. Social-Emotional: encourage socializing when seated on the bars.

Curved slide

Physical: sliding develops spatial awareness and a sense of balance. Furthermore, the core muscles are trained when sitting upright going down. Social-Emotional: empathy stimulated by turn-taking. Cognitive: young children develop their understanding of space, speed and distances when sliding down quickly.

Climbing net

Physical: children develop cross-body coordination and muscle strength when climbing. The big meshes allow for climbing and crawling through, supporting proprioception and spatial awareness. Social-

Emotional: the big meshes allow for more children to sit together and talk.

Sand shovel

Physical: develops dexterity and upper body muscles. Cognitive: understanding of object permanence, emptying and filling scoop.

Sand scoops panel

Physical: hand eye coordination and push-pull movements. Social-Emotional: invites cooperation with two sides and provides for parallel play. Cognitive: logical thinking:

cause and effect understanding when running scoops in grooves or shifting materials from scoop to scoop. Creative: shifting scoops, creating new scoop positions.

Curly climber

Physical: coordination and proprioception are supported when placing arms and legs correctly for going down. Sense of balance when rotating. Arm muscles for holding tight.

Social-Emotional: empathy stimulated by turn-taking. Cognitive: logical thinking when placing arms and legs right for rotating downward.

Sand bucket

Physical: cross coordination thereby developing cooperation of left and right brain half which is necessary for academic skills such as reading. Cognitive: understanding of object permanence, emptying and filling bucket.

CON26-0049: SF PLAYGROUND CPA REPAIR PROJECT ATTACHMENT 1 Figure 6.2

Panels of 19 mm EcoCore™. EcoCore™ is a highly durable, eco-friendly material, which is not only recyclable after use, but also consists of material produced from +95% recycled post-consumer material from food packing waste.

Main posts with hot-dip galvanized steel footing are available in different materials: pressure impregnated pinewood posts; pre-galvanized inside and outside with powder-coated, top-finish steel posts; lead-free aluminum with color anodized top finish; Greenline TexMade posts of

95% post-consumer recycled PE and textile waste.

All decks are supported by uniquely designed, low-carbon aluminum profiles with multiple attachment options. The grey-colored molded decks are made of 75% post-consumer waste

PP material with a non-skid pattern and texture surface.

The slides can be chosen in six different colors and three materials: Straight or curved one-piece molded PE slides. Combined EcoCore™ sides and stainless steel. Full stainless steel in a one-piece design for more vandalism-proof solutions.

Wood version of FSC®-certified

(FSC®C004450) pine wood with pressure impregnated base treatment and brown painted top finish. Vertical boards and top ends protected by a unique aluminum profile for high outdoor durability.

Ropes are made of UV-stabilized PES rope strands with inner steel cable reinforcement.

The polyester wrapping is inductively melted onto each strand to ensure excellent wear and tear resistance.

Double Tower with Sand Play

PCM202631

Elevated activities 7

Accessible elevated activities

Accessible ground level activities

Accessible ground level play types

Present 5 2 2

Required 4 2 2

Item no. PCM202631-0901

Installation Information

Max. fall height 7'4"

Safety surfacing area 577ft²

Total installation time 25.5 hours

Excavation volume 0.68yd³

Concrete volume 0.03yd³

Footing depth (standard) 2'11"

Shipment weight 1558lbs

Anchoring options Surface a

In-ground a

Warranty Information

EcoCore HDPE Lifetime

Post 10 Years

PP Decks 10 Years

Ropes & nets 10 Years

Spare Parts Availability 10 Years

3 / 11/27/2025 Data is subject to change without prior notice.

CON26-0049: SF PLAYGROUND CPA REPAIR PROJECT ATTACHMENT 1 Figure 6.3

Cradle to Gate A1-A3 Total CO ₂ emission

CO e/kg₂ Recycled materials kg CO e₂ kg CO e/kg₂ %

PCM202631-0951 2,238.47 3.15 72.59

PCM202631-0901 2,021.41 3.41 66.17

The overall framework applied for these factors is the Environmental Product Declaration (EPD), which quantifies "environmental information on the life cycle of a product and enable comparisons between products fulfilling the same function" (ISO, 2006). This follows the structure and applies a Life-Cycle

Assessment approach to the entire Product stage from raw material through manufacturing (A1-A3))

4 / 11/27/2025 Data is subject to change without prior notice.

Sustainability Data

PCM202631

CON26-0049: SF PLAYGROUND CPA REPAIR PROJECT ATTACHMENT 1 Figure 6.4

* Max fall height | ** Total height | *** Safety surfacing area * Max fall height | ** Total height

Double Tower with Sand Play

PCM202631

5 / 11/27/2025 Data is subject to change without prior notice.

Click to see TOP VIEW Click to see SIDE VIEW