COMPLETE RFP 3.11.2024.pdf

RFP Issue Date: March 13, 2024

Mandatory Pre-Bid Conference: March 20, 2024 - 3:00 pm

Due Date of Bids: April 5, 2024 – 1:00 pm

Bid Type: Competitive Sealed Bid

Mark Envelope: CIS INTERIOR DOORS

Submit Bid To: Clio Area School District

1 Mustang Dr.

Clio, MI 48420

Attn: Carrie Sekelsky

Completion Date: August 30, 2024

Requests for information regarding technical matters of this Request for Proposal should be directed to:

Brad Wiskur, Director of Operations and Transportation

Clio Area School District

(810) 591-2688 bwiskur@clioschools.org

Section I. General Conditions

1. Clio Area Schools Board of Education will receive sealed bids up to the hour of 1:00 PM on Friday, April 5, 2024 at the Central Administrative Office at 1 Mustang Drive, Clio, MI 48420. All bids must be received by the time designated this request for proposals and none will be considered thereafter. Please note that if you are using U.S. Postal Service, UPS, Federal Express, or other methods of delivery, there is no guarantee that it will be received by the time indicated if it is received on the day bids are due. No bids will be accepted via email or facsimile.

2. At the above-designated time, bids will be opened and read publicly. Any interested parties may attend. No immediate decision shall be rendered concerning the bids submitted. Bid packets must be sealed and clearly marked: CIS INTERIOR DOORS.

3. The Clio Area Schools Board of Education shall give formal consideration to these bids at the next Board meeting after the bids are opened, contingent upon final tabulation of the bids prior to the Board meeting. This scheduled Board meeting date is April 11, 2024.

4. Bids shall be submitted on the attached bidding form or a true copy thereof.

5. No bid may be withdrawn for a period of thirty days after the scheduled closing time for bids.

6. The Clio Area Schools Board of Education has been issued a Michigan Sales Tax Exemption Certificate. Sales Tax will not apply to any purchase.

7. The Clio Area Schools Board of Education reserves the right to make an award to individual vendors (by each item, by groups of items or for all items for the bid) and to reject any and all bids in whole or part if in its judgment the best interest of the schools will be served.

8. The Clio Area Schools Board of Education reserves the right to reject any or all bids in whole or in part or to waive any informalities or irregularities, if, in its judgment, the best interest of the school district will be served.

9. Termination: The Clio Area Schools Board of Education has the right to terminate this contract at any time for cause.

10. Review: After the public opening of bids, the finance department of Clio Area Schools will review the bids. The proposal with the lowest qualified bid will be checked for completeness and accuracy of mathematical extensions and additions. All proposals may be subject to verifications. If the errors on math and brands are within tolerance levels described in the contract, the bottom line will be adjusted, and if the proposal is still the lowest bid, the proposal disclosure procedure will continue.

11. Clarifications: The Clio Area Schools Board of Education reserves the right, at any time after opening and prior to bid award, to request clarification from any Bidder, address technical questions, or to seek or provide other information regarding the

Bidder’s proposal. Such a process may be used in order to assure mutual understanding between both parties and to aid in determination of responsiveness or responsibility.

12. Indemnification: The contractor agrees to hold and save the school systems, its officers, agents, and employees harmless from liability of any kind, including costs and expenses, with respect to any claim, action, cost or judgment for patent, copyright or trademark infringement arising out of the purchase or use of equipment or use of equipment, materials, supplies, or services covered by this contract.

Section II. Bid Specifications

1. The Clio Area Schools Board of Education is requesting bids for interior doors and hardware.

2. The method of procurement used is the Competitive Sealed Bids. All prices must include shipping and delivery.

3. A description for the work to be completed is attached in Section IV. Bidder is responsible to follow attached bid specification requirements. Any scope specific questions can be addressed to Brad Wiskur, Director of Operations and Transportation at (810) 591-2688 or bwiskur@clioschools.org.

4. A mandatory pre-bid conference is scheduled for March 20, 2024 at 3pm. All interested parties are invited to attend. Bidders shall meet at the main entrance of the building:

Clio Intermediate School 300 Rogers Lodge Dr.

Clio, MI 48420

5. All bidders shall provide a proposed time frame for work to be completed. Work must be completed between June 14, 2024 and August 30, 2024.

7. Bidders shall provide three references for which they have done similar work, including contact person, address, and phone number.

8. The completion date for all work shall be no later than Noon on August 30, 2024.

9. All bidders shall provide certificate of insurance, both liability and worker’s compensation for sufficient coverage for any contingent liability. Coverage shall have a minimum of $500,000 liability, $100,000 Property Liability, and $500,000 Auto Liability.

Upon award of contract, the selected vendor shall list Clio Area Schools Board of Education as an additional insured on said policies and provide certificates of insurance prior to proposed start date.

10. The successful bidder shall be required to submit a schedule of work to Brad Wiskur, Director of Operations and Transportation for Clio Area Schools, when awarded the project..

11. The successful bidder shall be responsible for cleaning the job area daily and dispose of all trash and debris leaving the area broom clean. The Owners dumpster is not to be used for contractor’s trash.

12. Use of Premises and Site: The successful bidder shall limit the use of the premises to the work areas indicated and shall confine operations to areas where the work is required. The successful bidder shall also maintain the working area in a clean and safe manner and shall cooperate with the Clio Area Schools personnel during installation operations to minimize conflicts and facilitate owner usage. The successful bidder shall allow for owner occupancy by keeping driveways and entrances serving the premises clear and available to the owner, owner’s employees, and emergency vehicles at all times. These areas will not be used by the bidder for parking or storage of materials.

13. The successful bidder shall be responsible for compliance with all local, state, and federal codes for the storage, handling and disposing of materials.

14. Penalty: The designated supplier(s) reciprocally agrees to provide total requirements as listed herein, thereby minimizing occurrences when a school district may have to seek other interim product sources.

15. Modifications, additions, or changes to the terms and conditions of the Invitation to Bid may be a cause for rejection of a bid. ALL modifications should be BOLDED and clearly indicated on all documents. Bidders are required to submit all bids on the school district’s official forms.

16. All Contractors must maintain records for 3 years after the final payment on the contract is received.

Section III: Standard Contract Conditions

1. Contractors providing service under this contract, herewith, assure the school district they are conforming to the provisions of the Civil Rights Act of 1964, as amended.

2. Contractors shall comply with Executive Order 11256, Entitled “Equal Employment Opportunity,” as amended by Labor regulations (41 CFT Part 60).

3. State Sales and Use Tax Certificate of Exemption form will be issued upon request.

Sales tax shall be included in prices where applicable.

4. Contractor shall comply with applicable federal, state and local laws and regulations pertaining to wages, hours, and conditions of employment, in connection with the contractor’s performance of work under this contract. The contractor agrees not to discriminate against any employee(s) or applicant(s) for employment because of age, race, color, sex, national origin or disability.

5. The contractor agrees to retain all books, records, and other documents relative to this agreement for three (3) years after final payment. The district, their authorized agents, and/or state/federal representatives shall have full access to, and right to, examine any of said materials during said period. If an investigation or audit is in progress, records shall be maintained until stated matter is closed.

6. Any product offered which is not labeled in such a manner as to permit interstate transport will be rejected.

7. Contract shall comply with all applicable standards, orders, or requirements issued under Section 306 of the Clean Air Act, (42 US C. 1857-H), Section 508 of the Clean Water Act (33 USC 1368), Executive Order 11738, energy efficiency as provided in 7 CFR Part 3016.36(i) 13, and Environmental Protection Agency Regulations (40 CFR Part 15), which prohibit the use under non-exempt federal contracts, grants, or loans of facilities included on the EPA List of Violating Facilities.

8. By signing this document the contractor certifies that this proposal is made without prior understanding, agreement, or connection with any corporation, firm or person submitting a proposal for the same materials, supplies, or furniture, and is in all respects fair, and without collusion or fraud. The contractor certifies that collusive bidding is a violation of federal law and can result in fines, prison sentences, and civil damage awards.

9. By signing this document the contractor certifies on behalf of the company and its key employees that neither the company nor its key employees have been proposed for debarment, debarred, nor suspended by any federal agency and must certify to these facts by signing and submitting the required certification. Failure to submit the certification will disqualify a bid.

10.Any employee or any official of the school district, elective or appointive, who shall take, receive or offer to take or receive, either directly or indirectly, any rebate, percentage of contracts, money or other things of values, as an inducement or intended inducement, in the procurement of business, or the giving of business, for, to, or from, any person, partnership, firm or corporation, offering, bidding for, or in open market seeking to make sales to the Board of Education represented shall be deemed ineligible to bid and will be prosecuted to the fullest extent of the law.

In accordance with Federal civil rights law and U.S. Department of Agriculture (USDA) civil rights regulations and policies, the USDA, its Agencies, offices, and employees, and institutions participating in or administering USDA programs are prohibited from discriminating based on race, color, national origin, religion, sex, gender identity (including gender expression), sexual orientation, disability, age, marital status, family/parental status, income derived from a public assistance program, political beliefs, or reprisal or retaliation for prior civil rights activity, in any program or activity conducted or funded by USDA (not all bases apply to all programs). Remedies and complaint filing deadlines vary by program or incident.

Persons with disabilities who require alternative means of communication for program information (e.g., Braille, large print, audiotape, American Sign Language, etc.) should contact the responsible Agency or USDA's TARGET Center at (202) 720-2600 (voice and TTY) or contact USDA through the Federal Relay Service at (800) 877-8339.

Additionally, program information may be made available in languages other than English.

To file a program discrimination complaint, complete the USDA Program Discrimination Complaint Form, AD-3027, found online at How to File a Program Discrimination Complaint and at any USDA office or write a letter addressed to USDA and provide in the letter all of the information requested in the form. To request a copy of the complaint form, call (866) 632-9992. Submit your completed form or letter to USDA by: (1) mail:

U.S. Department of Agriculture, Office of the Assistant Secretary for Civil Rights, 1400 Independence Avenue, SW, Washington, D.C. 20250-9410; (2) fax: (202) 690- 7442; or

(3) email: program.intake@usda.gov. This institution is an Equal Opportunity Provider.

Section IV: Product Specifications

Bid is to include labor to remove and install all doors and hardware listed on the following pages.

Existing Frame, Hollow Metal Door & Wood Door Report

FRAME PROFILES

DOOR HANDING CHART

RECORD OF SUBMITTALS

ARCHITECT JOB NO.

PROJECT

LOCATION

ARCHITECT

CONTRACTOR

FINISH HARDWARE BY

SHEET NO. OF

SUBMITTED RETURNED

1ST

2ND

3RD

4TH

RECEIVED APPROVED DRAWINGS

RECEIVED APPROVED HARDWARE

DRAWN BY:

Communicating FrameDouble Acting

RH - Right HandLH - Left Hand

= KEY SIDEK

K K

K K

LHR - Left Hand Reverse RHR - Right Hand Reverse

Clio Intermediate School

LEGEND

Hollow Metal Door

Edge

N Seamless edge Face Type

F Flush Gauge

18 18 Gauge Label

WB Warnock 'B' (1-1/2 Hour Fire Door) Mfr Location

PI Pioneer Series

707 Polystyrene core Steel Type

CR Cold rolled

Wood Door Bevel

3/3 Bevel BOTH Stile Edges Core

EC Bonded Engineered Composite Core (Hardwood Edges)

FD Fire Door Core

PC Bonded Particleboard Core (Hardwood Edges)

Face Type

F Flush Door

FNV6 5" x 20" Narrow Vision Lite Finish

100 Clear Topcoat Label

A45 Positive Pressure w/built in Intumescent Seal

- 45 minute (Cat. A)

A90 Positive Pressure w/built in Intumescent Seal

- 90 minute (Cat. A)

Mfr Location

C Ceco

PI Pioneer

S Steelcraft

SP Special Locations (create ADD-ON) Moulding

6 M6G - Flush Moulding for Lites Series

GPD Premium Door Species

PWM Maple - White, Plain Sliced

Material Schedule

O P E N I N G S Opening # Arch Mark Qty UOM Hand

Description

Rev Location

Hdw Set

Qty UOM StatusHandMat

Size

Elevation

F R A M E S Mat Qty Hand Elevation UOM Status

Size Jamb

Series Label Face Type

Ga Core

Edge Specie

S.T.

Edge

Bevel Block MouldSetGroupFinish Elev Profile

D O O R S

Notes Notes

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

200 200 1 SGL SGL1WDD Existing 1 SGL

4 3' 0" x 7' 0" x 1 3/4" HMD/Existing 707 WB F 18 N CR

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

200B 200B 1 SGL SGL1HMD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

201 201 1 SGL SGL1WDD Existing 1 SGL

7 2' 4" x 7' 0" x 1 3/4" WDD/Existing GPD F PC PWM 3/3 100

2' 4"x7' 0" x 1 3/4" 2' 4" x 7' 0"

201E 201E 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

202 202 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

203 203 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

204 204 1 SGL SGL1WDD Existing 1 SGL

6 2-3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 EC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 6' 0" x 7' 0"

205A 205A 1 PRA/PRI PRA1WDD Existing 1 PRA/PRI

GPD FNV6 EC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4"

PRI1WDD

1 2' 8" x 7' 0" x 1 3/4" WDD/Existing GPD F PC PWM 3/3 100

2' 8"x7' 0" x 1 3/4" 2' 8" x 7' 0"

205A1 205A1 1 SGL SGL1WDD Existing 1 SGL

1 2' 8" x 7' 0" x 1 3/4" WDD/Existing GPD F PC PWM 3/3 100

2' 8"x7' 0" x 1 3/4" 2' 8" x 7' 0"

205A2 205A2 1 SGL SGL1WDD Existing 1 SGL l

O P E N I N G S Opening # Arch Mark Qty UOM Hand

Description

Rev Location

Hdw Set

Qty UOM StatusHandMat

Size

Elevation

F R A M E S Mat Qty Hand Elevation UOM Status

Size Jamb

Series Label Face Type

Ga Core

Edge Specie

S.T.

Edge

Bevel Block MouldSetGroupFinish Elev Profile

D O O R S

Notes Notes

6 2-3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 EC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 6' 0" x 7' 0"

205B 205B 1 PRA/PRI PRA1WDD Existing 1 PRA/PRI

GPD FNV6 EC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4"

PRI1WDD

1 2' 8" x 7' 0" x 1 3/4" WDD/Existing GPD F PC PWM 3/3 100

2' 8"x7' 0" x 1 3/4" 2' 8" x 7' 0"

205B1 205B1 1 SGL SGL1WDD Existing 1 SGL

1 2' 8" x 7' 0" x 1 3/4" WDD/Existing GPD F PC PWM 3/3 100

2' 8"x7' 0" x 1 3/4" 2' 8" x 7' 0"

205B2 205B2 1 SGL SGL1WDD Existing 1 SGL

4 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD A90 F FD PWM 3/3 100

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

205C1 205C1 1 SGL SGL1WDD Existing 1 SGL

8 (3' 0")(1' 8") x 7' 0" x 1 3/4" WDD/Existing GPD A90 F FD PWM 3/3 100

3' 0"x7' 0" x 1 3/4" 4' 8" x 7' 0"

205C2 205C2 1 PRA/PRI PRA1WDD Existing 1 PRA/PRI

GPD A90 F FD PWM 3/3 100

1' 8"x7' 0" x 1 3/4"

PRI1WDD

8 2-3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD A90 F FD PWM 3/3 100

3' 0"x7' 0" x 1 3/4" 6' 0" x 7' 0"

205D 205D 1 PRA/PRI PRA1WDD Existing 1 PRA/PRI

GPD A90 F FD PWM 3/3 100

3' 0"x7' 0" x 1 3/4"

PRI1WDD

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

206A1 206A1 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD F PC PWM 3/3 100

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

206A2 206A2 1 SGL SGL1WDD Existing 1 SGL l

O P E N I N G S Opening # Arch Mark Qty UOM Hand

Description

Rev Location

Hdw Set

Qty UOM StatusHandMat

Size

Elevation

F R A M E S Mat Qty Hand Elevation UOM Status

Size Jamb

Series Label Face Type

Ga Core

Edge Specie

S.T.

Edge

Bevel Block MouldSetGroupFinish Elev Profile

D O O R S

Notes Notes

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

206A3 206A3 1 SGL SGL1WDD Existing 1 SGL

4 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD A45 F EC PWM 3/3 100

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

206B 206B 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

206C 206C 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

207 207 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

208 208 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

209 209 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

210 210 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

211 211 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

212 212 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

213 213 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

214 214 1 SGL SGL1WDD Existing 1 SGL

Opening # Arch Mark Qty UOM Hand

Description

Rev Location

Hdw Set

Qty UOM StatusHandMat

Size

Elevation

F R A M E S Mat Qty Hand Elevation UOM Status

Size Jamb

Series Label Face Type

Ga Core

Edge Specie

S.T.

Edge

Bevel Block MouldSetGroupFinish Elev Profile

D O O R S

Notes Notes

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

215 215 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

216 216 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

217 217 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

218 218 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

219 219 1 SGL SGL1WDD Existing 1 SGL

2 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD F PC PWM 3/3 100

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

219A 219A 1 SGL SGL1WDD Existing 1 SGL

4 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD A90 F FD PWM 3/3 100

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

219B 219B 1 SGL SGL1WDD Existing 1 SGL

2 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD F PC PWM 3/3 100

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

219C 219C 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

220A1 220A1 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

220A2 220A2 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

220B1 220B1 1 SGL SGL1WDD Existing 1 SGL

Opening # Arch Mark Qty UOM Hand

Description

Rev Location

Hdw Set

Qty UOM StatusHandMat

Size

Elevation

F R A M E S Mat Qty Hand Elevation UOM Status

Size Jamb

Series Label Face Type

Ga Core

Edge Specie

S.T.

Edge

Bevel Block MouldSetGroupFinish Elev Profile

D O O R S

Notes Notes

5 2-3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 EC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 6' 0" x 7' 0"

220B2 220B2 1 PRA/PRI PRA1WDD Existing 1 PRA/PRI

GPD FNV6 EC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4"

PRI1WDD

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

221 221 1 SGL SGL1WDD Existing 1 SGL

2 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD F PC PWM 3/3 100

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

221A 221A 1 SGL SGL1WDD Existing 1 SGL

4 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD A90 F FD PWM 3/3 100

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

221B 221B 1 SGL SGL1WDD Existing 1 SGL

2 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD F PC PWM 3/3 100

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

221C 221C 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

222 222 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

223 223 1 SGL SGL1WDD Existing 1 SGL

1 3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 PC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 3' 0" x 7' 0"

224 224 1 SGL SGL1WDD Existing 1 SGL

3 2-3' 0" x 6' 8" x 1 3/4" WDD/Existing GPD FNV6 EC PWM 3/3 100 6

3' 0"x6' 8" x 1 3/4" 6' 0" x 6' 8"

#3 Vestibule #3 Vestibule 1 PR PR1WDD Existing 1 PR

GPD FNV6 EC PWM 3/3 100 6

3' 0"x6' 8" x 1 3/4"

PR1WDD

Opening # Arch Mark Qty UOM Hand

Description

Rev Location

Hdw Set

Qty UOM StatusHandMat

Size

Elevation

F R A M E S Mat Qty Hand Elevation UOM Status

Size Jamb

Series Label Face Type

Ga Core

Edge Specie

S.T.

Edge

Bevel Block MouldSetGroupFinish Elev Profile

D O O R S

Notes Notes

3 2-3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 EC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 6' 0" x 7' 0"

C102 C102 1 PR PR1WDD Existing 1 PR

GPD FNV6 EC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4"

PR1WDD

3 2-3' 0" x 7' 0" x 1 3/4" WDD/Existing GPD FNV6 EC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4" 6' 0" x 7' 0"

Vestibule Vestibule 1 PR PR1WDD Existing 1 PR

GPD FNV6 EC PWM 3/3 100 6

3' 0"x7' 0" x 1 3/4"

PR1WDD

Each to receive:

Doors: 200, 201, 202, 203, 204, 205A1, 205A2, 205B1, 205B2, 206A1, 206A2, 206A3, 206C, 207, 208, 209, 210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220A1, 220A2, 220B1, 221, 222, 223, 224

Hardware Set #: 1

EA3 5BB1 4-1/2" x 4-1/2" 652Hinge, Full Mortise IV

EA1 L9071 .L .06A .626 .L283-711Mortise Lock SC

EA2 41 US32D REMortise Cylinder SA

EA1 4111 .EDA .689 .WMSSurface Closer LC

EA1 8400 B-CS 10" x 34" US32DKick Plate IV

EA1 WS40 626Wall Stop IV

Each to receive:

Doors: 219A, 219C, 221A, 221C

Hardware Set #: 2

EA3 5BB1 4-1/2" x 4-1/2" 652Hinge, Full Mortise IV

EA1 487 US26D REDeadbolt SA

EA1 BF 106x70C US32DPull Plate RO

EA1 70C-RKW US32DPush Plate RO

EA1 4011 .REGARM .689 .WMSSurface Closer LC

EA1 8400 B-CS 10" x 34" US32DKick Plate IV

Each to receive:

Doors: #3 Vestibule, C102, Vestibule

Hardware Set #: 3

EA6 5BB1 4-1/2" x 4-1/2" 652Hinge, Full Mortise IV

EA2 BF 106x70C US32DPull Plate RO

EA2 70C-RKW US32DPush Plate RO

EA2 4111 .EDA .689 .WMSSurface Closer LC

EA2 8400 B-CS 10" x 34" US32DKick Plate IV

Each to receive:

Doors: 200B, 205C1, 206B, 219B, 221B

Hardware Set #: 4

EA3 5BB1 4-1/2" x 4-1/2" 652Hinge, Full Mortise IV

EA1 L9080 .L .06A .626Mortise Lock SC

EA1 41 US32D REMortise Cylinder SA

EA1 4011 .REGARM .689 .WMSSurface Closer LC

EA1 8400 B-CS 10" x 34" US32DKick Plate IV

Each to receive:

Doors: 220B2

Hardware Set #: 5

EA6 5BB1 4-1/2" x 4-1/2" 652Hinge, Full Mortise IV

EA1 9827.EO .626Surface Vert Rod Exit VD

EA1 9827.L .626 .996L(Std)Surface Vert Rod Exit VD

EA1 34 US32D RERim Cylinder SA

EA2 4111 .EDA .689 .WMSSurface Closer LC

EA2 8400 B-CS 10" x 34" US32DKick Plate IV

Each to receive:

Doors: 205A, 205B

Hardware Set #: 6

EA6 5BB1 4-1/2" x 4-1/2" 652Hinge, Full Mortise IV

EA1 KR4954 7'6 .689Mullion VD

EA1 98.L .626 .996L(Std)Rim Exit Device VD

EA1 98.EO .626Rim Exit Device VD

EA1 41 US32D REMortise Cylinder SA

EA1 34 US32D RERim Cylinder SA

EA2 4111 .EDA .689 .WMSSurface Closer LC

EA2 8400 B-CS 10" x 34" US32DKick Plate IV

Each to receive:

Doors: 201E

Hardware Set #: 7

EA3 5BB1 4-1/2" x 4-1/2" 652Hinge, Full Mortise IV

EA1 L9485 .L .06A .626 .L283-722Mortise Lock SC

EA1 41 US32D REMortise Cylinder SA

Each to receive:

Doors: 205C2, 205D

Hardware Set #: 8

EA6 5BB1 4-1/2" x 4-1/2" 652Hinge, Full Mortise IV

EA2 FB458 626Flush Bolt IV

EA1 DP1 626Dust Proof Strike IV

EA1 L9080 .L .06A .626Mortise Lock SC

EA1 41 US32D REMortise Cylinder SA

EA2 4111 .EDA .689 .WMSSurface Closer LC

EA2 8400 B-CS 10" x 34" US32DKick Plate IV

BID FORM – COMPLETE NEW FORM FOR EACH PRODUCT

Vendor Name: ______________________________

Address: ______________________________ ______________________________

Phone: ______________________________

Email: ______________________________

Authorized Signature: ______________________________

Print Name: ______________________________

Title: ______________________________

Date: ______________________________

ITEM - BRAND AND MODEL BID AMOUNT

Estimated Date of Delivery:

RETURN THIS PAGE WITH BID FORM

This form must be notarized and included with bidder’s quote:

The undersigned, the owner or authorized office of (the “Bidder”), pursuant to the familial disclosure requirement provided in the Clio Area School’s request for quote, hereby represent and warrant, except as provided below, that no familial relationships exist between the owner(s) or any employee of Clio Area Schools and any member of the Board of Education or the Superintendent of Clio Area Schools.

List any Familial Relationships:

Bidder:

By: _____________________________________________

Its: _____________________________________________

STATE OF MICHIGAN

COUNTY OF ____________________________

This instrument was acknowledged before me on the _____ day of _____________________, 20__.

Signature______________________________________________

Printed name___________________________________________

Notary public, State of Michigan, County of ___________________

My commission expires ___________________________________

This form must be notarized and included with bidder’s quote:

CERTIFICATION OF IRAN ECONOMIC SANCTIONS ACT

The undersigned, the owner or authorized office of (the “Bidder”), pursuant to the Iran Economic Sanctions Act requirement provided in the Clio Area Schools advertisement for bids, hereby represent and warrant THAT IT IS

NOT AN IRAN LINKED BUSINESS AS DEFINED BY MICHIGAN PUBLIC ACT 517

OF 2012.

Bidder:

By: _____________________________________________

Its: _____________________________________________

STATE OF MICHIGAN

COUNTY OF ____________________________

This instrument was acknowledged before me on the _____ day of _____________________, 20__.

Signature______________________________________________

Printed name___________________________________________

Notary public, State of Michigan, County of ___________________

My commission expires ___________________________________

AUTHENTICATION OF BID AND STATEMENT OF NON-COLLUSION AND NON

CONFLICT OF INTEREST COMLIANCE WITH THE MICHIGAN PROCUREMENT

CODE

That I am the bidder (if bidder is an individual), a partner in the bidder (if the bidder is a partnership), or an officer or employee of the bidding corporation having authority on its behalf (if the bidder is a corporation);

That the costs quoted in the attached bid or bids responding to the School Food Authority Invitation to Bid are correct and have been arrived at by the bidder independently and have been submitted without collusion and without agreement, understanding, or planned common course of action, with any vendor of materials, furniture, or services described in the invitation to bid, designed to limit independent bidding or competition;

That contents of the bid or bids have not been communicated by the bidder, or its employees or agents, to any person not an employee or agent of the bidder or its surety on any bond furnished with the bids and will not communicate to any such person prior to the official opening of the bid or bids; that the bidder is legally entitled to enter into contracts with agencies of the State of Michigan and is not in violation of any prohibited conflict of interest, gratuities and kickbacks including those prohibited by law.

Any employee or official of SFA or member school districts ,elective or appointed, who shall take, receive, or offer to take or receive, either directly or indirectly, any rebate, percentage of contract, money, or things of value as an inducement or intended inducement, or in the procurement of business, or the giving of business, for or to or from, any person, or in open market seeking to make sales to the school district shall be deemed guilty of a felony and upon conviction such person or persons shall be subject to punishment or fine in accordance with state and/or federal laws.

CERTIFICATION OF DISBARMENT AND SUSPENSION

By signature below, I certify on behalf of the company and its key employees that neither the company nor its key employees have been proposed for debarment, debarred, or suspended by any Federal Agency.

PROPOSAL CERTIFICATION

I hereby certify with my signature below that costs quoted in this proposal are correct and that I have authority to obligate my company to perform under the conditions stated in the proposal.

Signature: ___________________________

Company: ___________________________ Date: ________________