Combined Synopsis Solicitation 26Q8013.docx

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, using Simplified Acquisition Procedures found at FAR Part 13 as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov. The RFQ number is SPMYM326Q8013. This solicitation documents and incorporates provisions and clauses in effect through FAC 2026-01 March 13, 2026 and DFARS Change Notice 20251110. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at this address:

https://www.ecfr.gov and https://www.acquisition.gov/content/list-sections-affected and http://www.acq.osd.mil/dpap/dars/change_notices.html.

The FSC Code is 5305 and the NAICS 332722 code is The Small Business Standard is 600 . This requirement is being processed utilizing 100% Small Business Set-Aside

Evaluation criteria is Lowest Price Technically Acceptable (LPTA). PPIRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104.

The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing:

CAP SCREW 82 DEGREE INCLUDED ANGLE,

0.500-13UNRC-3A X 2.250 IN. LG. MFR IAW

FF-S-86J TYPE IV. MAT'L IS NICUAL, QQ-N-286G.

X 1.750 LONG. FF-S-86J TYPE-VI. ITEM SPECIFIED

SHALL CONFORM TO ALL REQUIREMENTS OF

NASM 16995-97, EXCEPT THE MATERIAL TO BE

INCONEL 718 OR 725 WITH MINIMUM YIELD

STRENGTH 120,000 PSI AND MINIMUM ELONGATION

OF 15%

X 1.750 IN. LG. MFR IAW FF-S-86J TY VI. MAT’L IS

CRES, HEAT AND CORROSION RESISTANT STEEL

A286. DRILL HEAD FOR LOCKWIRE IAW FF-S-86J PARA 3.5.2

X 4.000 IN. LG. MFR IAW ASTM A574-21 MOD.

MOD IS ELONGATION 12% MINIMUM IN 4 DIA.

MAT’L IS STEEL.

4.750" LONG ASTM F468-23 SILICON BRONZE

ALLOY-661.

X 2.250 ASTM A354-17 GRADE-BC.

NOTE: OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 252.204-7016, AND 252.204-7019 AND INCLUDE THE COMPLETED PROVISIONS WITH

THEIR OFFER.

FAR CLAUSES AND PROVISIONS

52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements 52.204-7, System for Award Maintenance 52.204-9, Personal Identity Verification of Contractor Personnel

52.204-13, SAM Maintenance 52.204-19, Incorporation by Reference of Representations and Certifications 52.209-5, Certification Regarding Responsibility Matters (OVER SAT)

52.209-10, Prohibition on Contracting with Inverted Domestic Corporations 52.211-14, Notice of Priority Rating 52.211-15, Defense Priority And Allocation Requirements 52.212-1, Instructions to Offerors - Commercial Products and Commercial Services 52.212-4, Contract Terms and Conditions – Commercial Items 52.219-1 Alt 1 Small Business Program Representations (OVER 10K)

52.232-39, Unenforceability of Unauthorized Obligations 52.232-40 Providing Accelerated Payments to Small Business Subcontractors 52.233-2 Service of Protest 52.233-3, Protest After Award 52.233-4, Applicable Law for Breach of Contract Claim 52.242-13 Bankruptcy 52.242-15 Stop Work Order 52.243-1, Changes Fixed Price 52.246-1, Contractor Inspection Requirements 52.247-34, F.O.B-Destination 52.252-1 Solicitation Provisions Incorporated by Reference 52.252-2 Clauses Incorporated by Reference 52.253-1, Computer Generated Forms

DFARS CLAUSES AND PROVISIONS

252.203-7000 Requirements Relating to Compensation of Former DoD Officials, 252.203-7002, Requirement to Inform Employees of Whistleblower Rights 252.203-7005 Representation Relating to Compensation of Former DoD Officials 252.204-7003. Control of Government Personnel Work Product 252.204-7004 Antiterrorism Awareness Training for Contractors.

252.204-7008 Compliance With Safeguarding Covered Defense Information Controls 252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting (May 2024) (Deviation 2024-O0013) 252.204-7015, Disclosure of Information to Litigation Support Contractors 252.204-7016, * See Attachment for this provision.

252-204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

252.204-7019, *See Attachment for this provision.

252.204-7020, NIST SP 800-171 DoD Assessment Requirements 252.204-7024 Notice on the Use of the Supplier Performance Risk System 252.209-7999, Representation by Corporations regarding an Unpaid Delinquent Tax Liability 252.211-7003, Item Unique Identification and Valuation 252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations.

252.223-7006, Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.

252.223-7008 Prohibition of Hexavalent Chromium 252.225-7001 Buy American and Balance of Payments Program 252.225-7002 Qualifying Country Sources as Subcontractors 252.225-7048, Export Controlled Items 252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region - Representation 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region 252.231-7000, Supplemental Cost Principles.

252.232-7003, Electronic Submission of Payment Requests 252.232-7006, Wide Area Workflow Payment Instructions *See Attachment for Full Text 252.232-7010, Levies on Contract Payments 252.243-7001, Pricing of Contract Modifications 252.243-7002, Requests for Equitable Adjustment 252.244-7000, Subcontracts for Commercial Items 252.247-7023, Transportation of Supplies By Sea

Note: Vendor shall list the country of origin for each line item.

DLAD CLAUSES AND PROVISIONS (See Attachment for Full Text)

5452.233-9001, Disputes: Agreement to Use Alternative Disputes Resolution

DLA PROCUREMENT NOTES (See Attachment for Full Text)

C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) C03 Contractor Retention of Supply Chain Traceability Documentation (MAR 2023) C04 Unused Former Government Surplus Property (DEC 2016) C14 Repackaging or Relabeling to Correct Deficiencies (AUG 2017) C20 Vendor Shipment Module (VSM) (AUG 2017) E05 Product Verification Testing (JUN 2018) G01 Additional Wide Area Workflow (WAWF) Information (AUG 2017) H10 Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (FEB 2020) L06 Agency Protests (DEC 2016) L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations L31 Additive Manufacturing (JUN 2018)

LOCAL CLAUSES (See Attachment for Full Text):

YM3 A1: Additional Information YM3 C500: Mercury Control (Supplies) YM3 C501: Correction of Certifications YM3 C524: Controlled Industrial Material YM3 C528: Specification Changes YM3 C531: Restrictions on K-Monel YM3 D2.2: Marking of Shipments YM3 D4: Preparation for Delivery YM3 D8: Prohibited Packing Materials YM3 E2: Inspection and Acceptance (Destination) YM3 E504: Notice of Constructive Acceptance Period YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard YM3 H500: Special Provisions for Threaded Products

Quoters are reminded to include a completed copy of 52.212-3 and it’s ALT I if not updated in SAM.

This announcement will close 4/16/2026 12:00 PM EST. The Point of Contact for this solicitation is Sam Aiguier who can be reached at sam.aiguier@dla.mil. All responsible sources may submit a quote which shall be considered by the agency.

System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/.

If not the actual manufacturer – Manufacturer’s Name, Location, and Business Size must be provided.

Please submit quotations via email at sam.aiguier@dla.mil Quotes also to: DLA-KME-QUOTATIONS@DLA.MIL

All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC)* or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, Paypal, etc.) Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.

*If selecting GCPC as the preferred method of payment, please be advised that per DFARS 232.7002, a receiving report MUST be entered into WAWF.

******* END OF COMBINED SYNOPSIS/SOLICITATION ********