Combined Synopsis_Solicitatiion KAF Tents_Posting.pdf

COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS

General Information

Document Type: Combined Solicitation/Synopsis

Solicitation Number: W91B4N-20-Q-5175

Posted Date: 07/10/2020

Response Due Date and Time: 07/13/2020 9:00 PM local time (Doha, Qatar)

Product or Service Code: 5410 Prefabricated and Portable Buildings

NAICS Code: 314910 Textile Bag and Canvas Mills

Set Aside: N/A Full and Open Competition

Contracting Office:

Regional Contracting Center – Afghanistan Bagrham Air Field, Afghanistan

Description:

This is a Combined Synopsis/Solicitation for Commercial Items prepared in accordance with the format in Federal Acquisition Circular 2020-07,” as supplemented with additional information included in this notice.

This solicitation is a "request for quotations (RFQ)." The solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Regulation. This announcement constitutes the only solicitation; “quotations” are being requested, and a written solicitation document will not be issued

The associated North American Industrial Classification System (NAICS) code for this procurement is 314910, with a small business size standard of 500 employees.

The Regional Contracting Center-Afghanistan is seeking to purchase four (4) Large Area Maintenance Shelter’s (LAMS), three (3x) 75' WIDTH x 192' LENGTH x 16' EAVE x 12.5' BAY SPACING- FULL WIDTH DOOR and one (1x) 90' WIDE X 125' LENGTH X 16' EAVE X 15' BAY SPACING- FULL WIDTH DOOR; attachment 1 of this document provides specific information and specifications on the shelters.

In order to be considered, all submissions must be received, as instructed by this solicitation, by the agency before the closing date and time as specified above.

Place of Delivery:

Address: Kandahar Airfield, Postal Code: 09354

Country: Afghanistan

Offers submitted on a basis other than f.o.b. destination will be rejected as nonresponsive. Place of inspection and acceptance will be at Government location (Kandahar, Afghanistan)

Requested Delivery Date: 08/20/20

The following provisions and clauses apply to this acquisition:

- 52.212-1 Instructions to offerors – Commercial

- 52.212-2 Evaluation – Commercial Items

Addendums to above provisions is attached to this combine solicitation as “Attachment 2 Instructions to Offerors and Evaluation of Quotes”.

Provision 52.212-3 Offeror Representations and Certifications – Commercial Items, must be fully completed and a copy included in the quote.

Clause 52.212-4, Contract Terms and Conditions – Commercial Items and 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Items, apply to this acquisition, both of which are included in “Attachment 3” of this solicitation.

The offers are due to this office no later than July 13, 2020 at 9:00 PM local time (Doha, Qatar), additional instructions can be found in “Addendum to Instructions to Offerors – Commercial” in Attachment 2 Instructions to Offerors and Evaluation of Quotes.

List of Attachments:

Attachment 1 - Technical Specifications

Attachment 2 Instructions to Offerors and Evaluation of Quote

Attachment 3 Clauses and Provisions

Attachment 4 DD Form 1653 Transportation Data Solicitations

HVAC 20 Ton Commercial unit Skid Mounted w/Duct

R22 MODULAR LINER PANEL 105' WIDE, 16' EAVE, 15' BAY, 16' EAVE, SOLID

Personnel Door, Solid w/view window, Single (3'0"wx6'8"h) LAMS Fabric Sliding Door Kit (12' Wide x 12' Height Electrical & Lighting Package (10 lights, 10 outlets, 2 Exit Safety, 1 panel box) Relocatable Perimeter Weather Seal HVAC Wall Duct Set Engineered Strut (90/115 Wind Load; 10/20 PSF) (Per Beam HVAC 10 Ton Commercial unit Skid Mounted w/Duct R22 Modular Liner Panel 75' Wide, 16' Eave, 12'-6" Bay, Solid

Personnel Door, Solid w/view window, Single (3'0"wx6'8"h)

LAMS A FABRIC SLIDING SIDE DOOR KIT 12' WIDE X 12'HEIGHT

Electrical & Lighting Package (6 lights, 6 outlets, 2 Exit Safety, 2 Beam Wire, 1 panel box) Relocatable Perimeter Weather Seal (per ft) HVAC Wall Duct Set

LAMS A - 75' WIDTH x 192' LENGTH x 16' EAVE x 12.5' BAY SPACING - FULL WIDTH DOOR Item 1

Item 2

Attachment 1 - Technical Specifications

LAMS A - 13: 90' WIDE X 125' LENGTH X 16' EAVE X 15' BAY SPACING- FULL WIDTH DOOR

Accessories

75' WIDE X 93' LENGTH X 16' EAVE X 12'-6" BAY - FULL WIDTH DOOR BASE

75' WIDE X 12'-6" LENGTH X 16' EAVE X 12'-6" BAY - MIDDLE BAY

Accessories

90' WIDE X 110' LENGTH X 16' EAVE X 15' BAY - FULL WIDTH DOOR BASE

90' WIDE X 15' LENGTH X 16' EAVE X 15' BAY - MIDDLE BAY

Quantity

Quantity

Sheet1

Attachment 2 – Instructions to Offerors and Evaluation of Quotes

52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (MAR 2020) ADDENDUM

(1) General. This procurement will be awarded to the responsible offeror providing the best value that meets all requirements outlined in the combined synopsis-solicitation. The quote will be evaluated in accordance with Federal Acquisition Regulation (FAR) 13.106-2(b). The offeror will provide a quote for the items with the salient characteristics and schedule listed in the solicitation.

(a) The Government intends to award a Firm Fixed Price Purchase Order without discussions with Offerors (except for clarifications as described in FAR 15.306(a). Therefore, the initial quote should contain the Offerors best terms that can meet the requested delivery schedule of 20 August 2020.

Offerors should not assume that they will be afforded the opportunity to clarify, discuss, or revise their quote. However, the Government reserves the right to request clarifications or enter discussions if determined by the Contracting Officer to be necessary. The Government may reject any or all responses if not in accordance with the FAR.

(b) The Government reserves the right to cancel this solicitation. The Government shall not be liable for any costs incurred by the Offeror in response to this request for quote. Additionally, the quote(s) shall be valid for 60 days after closing date of this solicitation.

(2) Quote Submission.

(a) All quotes shall be in the form prescribed by this solicitation and shall contain a response to each of the areas identified below in paragraph 4 of this addendum in conjunction with this solicitation. All responses shall be in English, legible and prepared in the following general format to be properly evaluated. Responses must be complete, self-sufficient, and respond directly to the requirements of this Request for Quote (RFQ).

(b) Electronic submission. The Offeror shall provide a copy of its quotation as an electronic file. By submission of a quote on electronic media, the Offeror shall ensure that the submission is readable, in the format specified in the combine synopsis-solicitation. The quote shall be emailed to SSG Ambrosio Alvarez Contract Specialist at ambrosio.c.alvarezestero.mil@mail.mil on or before 13 July 2020 at 9:00 pm local time (Doha, Qatar), with courtesy copy (Cc.) to MAJ Desiree Dirige at desiree.s.dirige.mil@mail.mil. All submissions shall be submitted with the subject line as “W91B4N-20-Q- 5175– Quote Submission”.

(c) To be eligible and responsive for award, prime and all subcontractors must be registered at the time the quote is submitted and approved at time of award in Joint Contingency Contracting System (JCCS).

In addition, all subcontractors at all tiers who will be contracted by the prime during the life of the contract shall also be registered and approved in JCCS and SAM by the award date. The contractor is required to submit a listing of all proposed subcontractors, at all tiers, to the contracting officer by the quotation date.

If no subcontractors are expected to perform during the life of the contract, the prime must submit a negative response to the contracting officer before the award date. Failure to be registered in JCSS and SAM at the prime and subcontractor levels and failure to inform the contracting officer of the names of all subcontractors (or provide a negative reply) may deem the Offeror nonresponsive and ineligible for award. A "subcontractor" means any supplier, distributor, vendor, or firm (company) that furnishes supplies or services to or for a prime contractor or for another subcontractor.

(3) Questions/Amendments.

(a) Solicitation Questions. Offerors may email questions regarding this solicitation to SSG Ambrosio Alvarez Contract Specialist at ambrosio.c.alvarezestero.mil@mail.mil on or before 11 July 2020 at 8:00 pm local time (Doha, Qatar), with courtesy copy (Cc.) to MAJ Desiree Dirige at desiree.s.dirige.mil@mail.mil. The Government will answer all questions received on or before 12 July 2020 at 8:00 pm local time (Doha, Qatar). All emailed questions shall be submitted with the subject line as “W91B4N-20-Q-5175 – Questions”. The Government reserves the right not to respond to any questions received concerning this solicitation after the Solicitation Questions receipt date and time above. Accordingly, Offerors are encouraged to carefully review all solicitation requirements and submit questions to the Government early in the solicitation process. Government responses to questions will be provided to all Offerors.

(b) Amendment. The Government reserves the right to revise or amend the specification prior to and/or after the date set for receipt of quotations as necessary. Such revisions, if any, will be announced by an amendment(s) to this RFQ.

(4) Format and Content of Quotation.

(a) Each quotation shall be submitted as set forth below and all information shall be confined to the appropriate part to facilitate independent evaluation. Quotations which do not include the requested minimum information, will be deemed non-responsive to the solicitation and will be eliminated from further consideration for award at the Government’s discretion. Quotation sections shall be labeled by section (i.e., Price).

(b) Price, Information, and Required Documents. Offeror shall provide all price information necessary to provide a meaningful basis for Government's analysis and evaluation of price for the items set forth in Attachment 1 of this solicitation. Prices shall include all related costs, (i.e., labor, wages, transportation, etc...), if applicable. The Government reserves the right to request other than certified cost and pricing data as needed. Proposed prices shall be in whole US Dollars ONLY. Quotations received in any other currency will be considered non-responsive and ineligible for award.

(c) To assure timely and equitable quotation evaluation, Offerors shall strictly follow the instructions contained herein. Offeror shall meet all solicitation requirements, such as terms and conditions, representations and certifications and requirements in addition to those identified as evaluation factors.

Offeror shall submit signed copies of all amendments (if any) issued for this solicitation. Offerors shall assume that the Government has no prior knowledge of their experience, and will base its evaluation on the information presented in the Offeror’s quotation.

(d) Quotations shall be complete, self-sufficient, and respond directly to the requirements of this solicitation. The quotation shall not simply rephrase or restate the Government's requirements, but rather provide convincing rationale clearly addressing how the offeror will provide the items that are consistent with the salient characteristics.

(e) Offeror will be required to delivery items in accordance with the requested delivery date of 20 August 2020 to Kandahar Airfield, Afghanistan.

(f) “Packing, Marking, and Consignment Instructions.

The marking and consignment of any shipments will conform to Defense Transportation Regulation, DOD 4500.9-R, Part II, Chapter 208, including by conforming to the current issue of MIL-STD-129 (Military Standard Marking for Shipment and Storage) and other applicable DOD regulations. If an item is dropped or damaged in transit, report it promptly using Transportation Discrepancy Report procedures IAW DTR, Part II, Chapter 210.

Contractor or vendor shipping activities will apply address markings using a bar coded Military Shipping Label (MSL) for all cargo shipments that will enter the Defense Transportation System (DTS). This includes shipments moving within the Continental United States (CONUS), between the CONUS and Outside the Continental United States (OCONUS), or conversely between OCONUS and the CONUS.

Shipments originating at non-military facilities moving to or through any DTS node, to include origin, consolidation, transship, a receiving terminal, or a transportation office or supply receiving function will be considered to have “entered the DTS” and must be marked with an MSL. Shipments that will not enter the DTS will have address markings applied as specified by the cognizant activity. Additional information concerning the latest requirements can be found in the DoD Logistics Implementation Plan for AIT published by the United States Transportation Command (USTRANSCOM) and available via links from https://www.ustranscom.mil/cmd/associated/ait/.”

(5) Responsibility of Offerors:

Offerors shall be financially responsible to perform the work described in this solicitation. To be determined responsible, the Offeror shall meet the requirements in accordance with FAR 9.104-1

FAR 52.212-2 EVALUATION—COMMERICAL ITEMS (OCT 2014) ADDENDUM

This addendum replaces provision FAR 52.212-2 in its entirety.

(a) The Government will award a purchase order resulting from this solicitation to the responsible offeror whose quotation conforming to the solicitation will be most advantageous to the Government, Technical and other factors considered, in accordance with FAR 13.106. The following factors shall be used to evaluate offers:

(i)Factor A. Technical Capability

a. Delivery will be considered significantly more important than price therefore, offerors are encouraged to meet the RDD (Required Delivery Date) or provide their best delivery schedule.

b. Meet specifications/characteristics of requested items.

(ii)Factor B. Lowest Price The price will be evaluated IAW FAR 13.106-3, some procedures from FAR 15-404-1 may also be use.

(b) To be eligible and responsive for award, prime and all subcontractors must be registered at the time the quote is submitted and approved at time of award in Joint Contingency Contracting System (JCCS).

U.S. companies must also be registered and approved in JCCS and System for Award Management (SAM) by the award date. In addition, all subcontractors at all tiers who will be contracted by the prime during the life of the contract shall also be registered and approved in JCCS and SAM by the award date.

The contractor is required to submit a listing of all proposed subcontractors, at all tiers, to the contracting officer by the quotation date. If no subcontractors are expected to perform during the life of the contract, the prime must submit a negative response to the contracting officer before the award date. Failure to be registered in JCSS and SAM at the prime and subcontractor levels and failure to inform the contracting officer of the names of all subcontractors (or provide a negative reply) may deem the offer non-responsive and ineligible for award. A "subcontractor" means any supplier, distributor, vendor, or firm (company) that furnishes supplies or services to or for a prime contractor or for another subcontractor.

( c ) To be determined responsible, a prospective contractor must meet FAR 9.104-1 General standards.

CLAUSES INCORPORATED BY REFERENCE

52.203-11 Certification And Disclosure Regarding Payments To Influence Certain Federal

Transactions SEP 2007 52.203-12 Limitation On Payments To Influence Certain Federal Transactions OCT 2010 52.204-6 Unique Entity Identifier OCT 2016 52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-16 Commercial and Government Entity Code Reporting JUL 2016 52.204-18 Commercial and Government Entity Code Maintenance JUL 2016 52.204-19 Incorporation by Reference of Representations and Certifications. DEC 2014 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. AUG 2019 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations-Representation. NOV

52.209-7 Information Regarding Responsibility Matters OCT 2018

52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters OCT 2018

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations NOV 2015 52.212-4 Contract Terms and Conditions--Commercial Items OCT 2018 52.222-19 Child Labor-Cooperation with Authorities and Remedies JAN 2020 52.222-56 Certification Regarding Trafficking in Persons Compliance Plan. MAR 2015 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving JUN 2020 52.225-13 Restrictions on Certain foreign Purchases 52.225-14 Inconsistency Between English Version And Translation Of Contract FEB 2000 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions

Relating to Iran—Representation and Certifications. AUG 2018 52.232-1 Payments APR 1984 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors DEC 2013 52.233-1 Alt I Disputes (May 2014) - Alternate I DEC 1991 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.247-34 F.O.B. Destination NOV 1991 52.252-3 Alterations in Solicitation APR 1984 52.252-5 Authorized Deviations In Provisions APR 1984 52.252-6 Authorized Deviations In Clauses APR 1984 252.203-7000 Requirements Relating to Compensation of Former DoD Officials SEP 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD Officials NOV 2011 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7008 Compliance With Safeguarding Covered Defense Information Controls OCT 2016 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting DEC 2019 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support MAY 2016 252.209-7004 Subcontracting With Firms That Are Owned or Controlled By The Government of a

Country that is a State Sponsor of Terrorism MAY 2019 252.211-7008 Use of Government-Assigned Serial Numbers SEP 2010 252.225-7041 Correspondence in English JUN 1997 252.225-7042 Authorization to Perform APR 2003 252.225-7048 Export – Controlled Items 252.225-7050 Disclosure of Ownership or Control by the Government of a Country that is a State

Sponsor of Terrorism 252.225-7994 (Dev) Additional Access to Contractor and Subcontractor Records in the United States

Central Command Theater of Operations (Deviation 2015-O0013) MAR 2015 252.229-7014 Taxes—Foreign Contracts in Afghanistan 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports DEC 2018 252.232-7008 Assignment of Claims (Overseas) JUN 1997

252.232-7010 Levies on Contract Payments DEC 2006 252.233-7001 Choice of Law (Overseas) JUN 1997 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel JUN 2013 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment DEC 2012 252.244-7000 Subcontracts for Commercial Items JUN 2013 252.246-7004 Safety of Facilities, Infrastructure, and Equipment for Military Operations OCT 2010

CLAUSES INCORPORATED BY FULL TEXT

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL ITEMS (MAR 2020)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2019) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub.

L. 109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

X (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

X (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 U.S.C. 2313).

____ (10) [Reserved]

____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (MAR 2020) (15 U.S.C.

657a).

____ (ii) Alternate I (MAR 2020) of 52.219-3.

____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (MAR 2020) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (ii) Alternate I (MAR 2020) of 52.219-4.

____ (13) [Reserved]

____ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (MAR 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020).

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (MAR 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-7.

____ (16) 52.219-8, Utilization of Small Business Concerns (OCT 2018) (15 U.S.C. 637(d)(2) and (3)).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (MAR 2020) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (NOV 2016) of 52.219-9.

____ (iii) Alternate II (NOV 2016) of 52.219-9.

____ (iv) Alternate III (MAR 2020) of 52.219-9.

____ (v) Alternate IV (AUG 2018) of 52.219-9.

____ (18) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

____ (19) 52.219-14, Limitations on Subcontracting (MAR 2020) (15 U.S.C. 637(a)(14)).

____ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (MAR 2020) (15 U.S.C. 657f).

____ (22) (i) 52.219-28, Post Award Small Business Program Rerepresentation (MAR 2020) (15 U.S.C.

632(a)(2)).

____ (ii) Alternate I (MAR 2020) of 52.219-28.

____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (MAR 2020) (15 U.S.C. 637(m)).

____ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (MAR 2020) (15 U.S.C. 637(m)).

____ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C.

644(r)).

____ (26) 52.219-33, Nonmanufacturer Rule (MAR 2020) (15 U.S.C. 637(a)(17)).

____ (27) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

____(28) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (JAN 2020) (E.O. 13126).

____ (29) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

(30)(i) 52.222-26, Equal Opportunity (SEPT 2016) (E.O. 11246).

____ (ii) Alternate I (FEB 1999) of 52.222-26.

____ (31)(i) 52.222-35, Equal Opportunity for Veterans (OCT 2015)(38 U.S.C. 4212).

____ (ii) Alternate I (JUL 2014) of 52.222-35.

____ (32)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUL 2014) (29 U.S.C. 793).

____ (ii) Alternate I (JUL 2014) of 52.222-36.

____ (33) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

____ (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496).

X (35)(i) 52.222-50, Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O.

13627).

____ (ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (36) 52.222-54, Employment Eligibility Verification (OCT 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

____ (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (MAY 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (JUN 2016) (E.O. 13693).

____ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (JUN 2016) (E.O. 13693).

____ (40) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (OCT 2015) of 52.223-13.

____ (41)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (JUN 2014) of 52.223-14.

____ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C. 8259b).

____ (43)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

____ (ii) Alternate I (JUN 2014) of 52.223-16.

X (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011) (E.O. 13513).

____ (45) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

X (46) 52.223-21, Foams (JUN 2016) (E.O. 13693).

X (47)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

____ (ii) Alternate I (JAN 2017) of 52.224-3.

____ (48) 52.225-1, Buy American--Supplies (MAY 2014) (41 U.S.C. chapter 83).

____ (49) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (MAY 2014) (41 U.S.C.

chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub.

L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I (MAY 2014) of 52.225-3.

____ (iii) Alternate II (MAY 2014) of 52.225-3.

____ (iv) Alternate III (MAY 2014) of 52.225-3.

____ (50) 52.225-5, Trade Agreements (OCT 2019) 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

X (51) 52.225-13, Restrictions on Certain Foreign Purchases (JUNE 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

X (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (NOV 2007) (42 U.S.C. 5150

____ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (NOV 2007) (42 U.S.C. 5150).

____ (55) 52.232-29, Terms for Financing of Purchases of Commercial Items (FEB 2002) (41 U.S.C.

4505, 10 U.S.C. 2307(f)).

____ (56) 52.232-30, Installment Payments for Commercial Items (JAN 2017) (41 U.S.C. 4505, 10 U.S.C.

2307(f)).

____ (57) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (OCT 2018) (31 U.S.C. 3332).

X (58) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management

(JUL 2013) (31 U.S.C. 3332).

____ (59) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (60) 52.239-1, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a).

____ (61) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(13)).

____ (62)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

____ (ii) Alternate I (APR 2003) of 52.247-64.

____ (iii) Alternate II (FEB 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(Contracting Officer check as appropriate.)

_____ (1) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495).

_____ (2) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

_____ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

_____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C.

chapter 67).

_____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____(8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658).

_____ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

_____ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(iv) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2019) (Section 889(a)(1)(A) of Pub. L. 115-232).

(v) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(vi) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(vii) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(viii) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(ix) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(x) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(xi) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(xii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xiii) 52.222-41, Service Contract Labor Standards (Aug 2018), (41 U.S.C. chapter 67).

(xiv) _____ (A) 52.222-50, Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O.

13627).

_____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xvi) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xvii) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xviii) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

(xix) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2017) (E.O. 13706).

(xx) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xxi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C.

2302 Note).

(xxii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C.

1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxiii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C.

Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.233-2 SERVICE OF PROTEST (SEP 2006)

(a) Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government Accountability Office (GAO), shall be served on the Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt from centcom.bagram.usfor-a.mbx.rcc-a-service-team-1@mail.mil or desiree.s.dirige.mil@mail.mil.

(b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO.

(End of provision)

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address (es):

https://www.acquisition.gov/

(End of provision)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address (es):

https://www.acquisition.gov

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) Definitions. As used in this clause-

Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Government's unit acquisition cost means--

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract line, subline, or exhibit line item No. Item description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract line, subline, or exhibit line item No. Item description

(If items are identified in the Schedule, insert ``See Schedule'' in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ----.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ----.

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or

(iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code--

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the…