Combined Synopsis Solicitaion_N4215824Q0041_Compressor Dryer Rentals.pdf

N4215824Q0041

This is a COMBINED SYNOPSIS/SOLICITATION for commercial products or commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation WILL be posted to SAM at https://sam.gov/.

The RFQ number is N4215824Q0041. This solicitation documents and incorporates provisions and clauses in effect through FAC 2024-06 effective on August 29, 2024 and the DFARS Change notice 20240815. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at this address: https://www.acquisition.gov/.

The NAICS CODE is 532490, the Product Service Code (PSC) is W043, and the Size Standard is $40M.

The Government intends to solicit and contract a Firm Fixed Price (FFP) Single Award Contract, to provide the rental of three (3) Grade D Air Compressors and three (3) Regenerative Air Dryers for the (CVN 69) Dwight D.

Eisenhower. The requirement will be solicited as Small Business set aside. Interested parties may identify their interest and capability to respond to the requirement and submit quotes. This notice of intent is a request for competitive quotes.

Norfolk Naval Shipyard (NNSY), Portsmouth, VA requests responses from qualified sources capable of providing three Grade D Air Compressors and three Regenerative Air Dryer rentals that are identified in the attached Statement of Work (SOW).

System for Award Management (SAM). Quoting vendors must be registered in the SAM database to be considered for award. Registration is free and can be completed on-line at http://sam.gov/.

To be considered for this opportunity, all quotes shall be submitted in either Microsoft Word, Excel spreadsheet or Adobe PDF. Quote must include price(s), FOB Destination, a point of contact, name and phone number, business size, and payment terms. An award will be made based on Lowest Price Technically Acceptable (LPTA). Each quote must clearly indicate the capability of the vendor to meet all specifications and requirements in the SOW.

Responses to this solicitation are due by 2:00 pm EST on Sept. 16, 2024. Email quotes to eboni.w.uwuseba.civ@us.mil.navy and shakir.o.shinaba.civ@us.navy.mil.

The vendor’s proposed price will be evaluated on the basis of price reasonableness. All prices must be considered fair and reasonable as determined by the Government. Price quote shall be held firm and valid for thirty (30) days (at minimum).

The completion and submission of the above items will constitute a quote and will be considered the vendor’s unconditional assent to the terms and conditions of this solicitation and any attachments and/or exhibits.

Failure to provide all of these documents by the required date and time may preclude a quotation from award consideration at the discretion of the Government.

NOTE: Quotations determined to be technically unacceptable shall not be further evaluated for award. For the technically acceptable quotations, the Government reserves the right to award to other than lowest price based upon a selection determined to be the best value to the Government, price and other factors considered.

Section SF 1449 - CONTINUATION SHEET

STATEMENT OF WORK

Scope:

1.1 Title: Grade D Air Compressors and Regenerative Air Dryers Rental for Dry Tool Air

1.2 Job Order: 38HOW99205 S01

1.3 Service rental from vendor to provide three (3) 800 cubic feet per minute (CFM) Grade D Air

Compressors, and three (3) 930 cfm minimum Regenerative Air Dryer Units meeting the specifications provided herein:

1.3.1 Provide three (3) Grade D Air Compressors and three (3) Regenerative Air Dryers to support work at Naval Operating Base (NOB) Norfolk, Norfolk, VA. At the conclusion of POP, compressors and driers will be returned to vendor.

1.3.2 Work to start and end at Naval Operating Base (NOB) Norfolk, Norfolk, VA.

1.3.3 Period of Performance: SEE SCHEDULE with the option to extend rental of air compressors and/or air dryers for six (6) months in one (1) month increments. Rental extensions may terminate the rental of one or more units based on use by NNSY. This charge will be prorated.

2. Reference:

3.1. CGA G-7.1

3.2. ISO 8573-1

3.3. NAVFAC P-307

3.4. FAR 22.102-1(a) (Safety)

3.5. OSHECM Chapter 250

3. General Specifications:

3.1 GRADE “D” AIR COMPRESSOR PARAMETERS:

3.1.1 The air compressors shall provide at least 800 cubic feet a minute (CFM) at 125 psig and shall be of an oil free, rotary screw design delivering Grade “D” air per CGA G-7.1 or oil free air per ISO 8573-1 Class 0.

3.1.2 Each air compressor must have a moisture separator (electric type) after cooler.

3.2 GRADE “D” AIR COMPRESSOR REQUIREMENTS:

3.2.1 Compressors must be of a rotary screw design. An oil flooded rotary screw design with attached oil separator is not acceptable.

3.2.2 Compressors must be a fixed speed design. A variable speed design is not acceptable.

3.2.3 The air compressors shall be electrically powered, suitable for 460 VAC, 3-phase, 60HZ, capable of running on a 400 amp circuit breaker.

3.2.4 The air compressors must be capable of running 24 hours/day, 7 days/week.

3.2.5 The compressors must have a gearbox casing designed to maintain a vacuum on its oil contents in order to prevent a potential of contamination of the air supply in the event of a seal failure.

3.2.6 The air compressors shall be equipped with fully automatic switching controls, alarms, and indicators so that the compressor packages require monitoring no more than once every 24 hours by operators after start-up.

3.2.7 Units will be in continuous use outdoors, and will be directly exposed to everyday weather and salt water air. All exposed components must be weather resistant. All components must meet or exceed NEMA Type 4 for outdoor use. It is the contractor’s responsibility to provide any protective coverings for the units.

3.2.8 Whip-check devices must be supplied with compressors.

3.3 GRADE “D” AIR COMPRESSOR CONSTRUCTION

3.3.1 The air compressors shall be wholly contained in one container or skid per compressor.

The container/skid shall be constructed to be portable, capable of being both transported by forklift and crane.

3.3.2 The air compressors shall comply with the applicable OSHA regulations.

3.3.3 The air compressors shall comply with the applicable ASME Boiler and Pressure Vessel

Code.

3.3.4 Relief valves shall have intact wire seals on their adjustment caps and shall bear tags indicating the set point, testing activity and test date.

3.3.5 Pressure gauges shall be in calibration to manufacturer standards and shall bear labels showing calibration which will not expire during the contract period.

3.3.6 Power cable end fittings will be lugged and color coded to indicate proper phasing. See

Appendix A of this section – “Interface Requirements for Rental Equipment Hook-up to NNSY Temporary Service” for proper electrical connections required.

3.3.7 The inlet and outlet of air compressors shall be 2” Male NPT. If units are not equipped with 2” Male NPT inlet/outlet connections, contractor shall provide and preinstall adapters as required at no cost to the government. See Appendix A of this section– “Interface Requirements for Rental Equipment Hook-up to NNSY Temporary Service” for proper mechanical connections required.

3.3.8 The equipment shall be outfitted with suitable attachments for overhead lifting.

3.3.9 Each lifting attachment shall be capable of supporting one half the gross weight of the equipment with a design factor of five to one based on ultimate strength.

3.3.10 Each lifting attachment shall be designed to accept a standard anchor shackle (Federal

Specification RR-C-271D, type IVA) which is capable of supporting one half the gross weight of the equipment.

3.3.11 Design of the lifting attachments shall be such that the shackles are not side loaded.

3.3.12 Each lifting attachment shall be conspicuously marked in a contrasting color “Lift Here”.

Letters shall have a minimum height of 1”.

3.3.13 The equipment shall be marked in a prominent location with the gross weight. Marking shall be upper case letters of a contrasting color, with a minimum height of 1”. Marking shall include the units (i.e. “pounds”, “long tons”, etc.).

3.3.14 The equipment shall be provided with a lifting sketch / rigging diagram.

3.3.15 The lifting sketch shall detail any specific requirements and / or configurations that must be met prior to lifting (i.e. “engage swing lock”, “Tilt mast back fully”, “Rotate lifting basket over side”, “Utilize 10’ minimum length slings”, “Spreader beam required”, etc.).

3.4 REGENERATIVE AIR DRYER PARAMETERS:

3.4.1 Regenerative air dryer units shall be capable of handling at least 930 cubic feet a minute (CFM) at 125 psig. Regenerative air dryer units must be able to provide a dew point of - 65 degrees F.

3.5 REGENERATIVE AIR DRYER REQUIREMENTS:

3.5.1 The regenerative air dryer units shall be electrically powered, suitable for 110/120 VAC, 1-phase, 60HZ. The dryers shall be self-contained so that the system is capable of producing dry air WITHOUT any additional utilities.

3.5.2 The regenerative air dryer units must provide oil-free air.

3.5.3 The regenerative air dryer units must be capable of running 24 hours/day, 7 days/week.

3.5.4 The regenerative air dryer units shall be equipped with fully automatic switching controls, alarms, and indicators so that the dryer package requires monitoring no more than once every 24 hours by operators after start-up.

3.5.5 The regenerative air dryer units shall include the following to meet the requirements of this specification:

a. Regenerative Air Dryer units are to be heatless, non-refrigerated, twin tower design of a regenerative nature utilizing hygroscopic desiccant with automatic condensate purges. One tower shall provide dry air while the other is in regeneration mode.

3.5.6 Units will be in continuous use outdoors, and will be directly exposed to everyday weather and salt water air. All exposed components must be weather resistant. All components must meet or exceed NEMA Type 4 for outdoor use. It is the contractor’s responsibility to provide any protective coverings for the units.

3.6 REGENERATIVE AIR DRYER CONSTRUCTION

3.6.1 The regenerative air dryer units shall be wholly contained in one container or skid per dryer. The containers/skids shall be constructed to be portable, capable of being both transported by forklift and crane.

3.6.2 The regenerative air dryer units shall comply with the applicable OSHA regulations.

3.6.3 The regenerative air dryer units shall comply with the applicable ASME Boiler and

Pressure Vessel Code.

3.6.4 Relief valves shall have intact wire seals on their adjustment caps and shall bear tags indicating the set point, testing activity and test date.

3.6.5 Pressure gauges shall be in calibration to manufacturer standards and shall bear labels showing calibration which will not expire during the contract period.

3.6.6 Power cable end fittings will be lugged and color coded to indicate proper phasing. See

Appendix A of this section – “Interface Requirements for Rental Equipment Hook-up to NNSY Temporary Service” for proper electrical connections required.

3.6.7 The inlet and outlet of each Regenerative Air Dryer shall be 2” Male NPT. If units are not equipped with 2” Male NPT inlet/outlet connections, contractor shall provide and preinstall adapters as required at no cost to the government. See Appendix A of this section– “Interface Requirements for Rental Equipment Hook-up to NNSY Temporary Service” for proper mechanical connections required.

3.6.8 The equipment shall be outfitted with suitable attachments for overhead lifting.

3.6.9 Each lifting attachment shall be capable of supporting one half the gross weight of the equipment with a design factor of five to one based on ultimate strength.

3.6.10 Each lifting attachment shall be designed to accept a standard anchor shackle (Federal

Specification RR-C-271D, type IVA) which is capable of supporting one half the gross weight of the equipment.

3.6.11 Design of the lifting attachments shall be such that the shackles are not side loaded.

3.6.12 Each lifting attachment shall be conspicuously marked in a contrasting color “Lift Here”.

Letters shall have a minimum height of 1”.

3.6.13 The equipment shall be marked in a prominent location with the gross weight. Marking shall be upper case letters of a contrasting color, with a minimum height of 1”. Marking shall include the units (i.e. “pounds”, “long tons”, etc.).

3.6.14 The equipment shall be provided with a lifting sketch / rigging diagram.

3.6.15 The lifting sketch shall detail any specific requirements and / or configurations that must be met prior to lifting (i.e. “engage swing lock”, “Tilt mast back fully”, “Rotate lifting basket over side”, “Utilize 10’ minimum length slings”, “Spreader beam required”, etc.).

3.7 MARKINGS:

3.7.1 The regenerative air dryer units shall have the (1) air capacity, (2) minimum/maximum supply pressure, (3) minimum/maximum operating temperature, and (4) the dew point range stamped on a metal plate attached to the equipment. Each major component of the system shall have the manufacturer's name and the manufacturer's serial number stamped on a metal plate attached to the component. No metal stamping is permitted on any surface subjected to high stresses in service, except as permitted by the applicable portions of the ASME Boiler and Pressure Vessel Code.

3.7.2 The air compressors shall have the (1) air capacity, (2) minimum/maximum supply pressure, (3) minimum/maximum operating temperature, and (4) the dew point range stamped on a metal plate attached to the equipment. Each major component of the system shall have the manufacturer's name and the manufacturer's serial number stamped on a metal plate attached to the component. No metal stamping is permitted on any surface subjected to high stresses in service, except as permitted by the applicable portions of the ASME Boiler and Pressure Vessel Code.

4. Period of Performance

4.1 POP: SEE SCHEDULE with the option to extend rental of air compressors and/or air dryers for six (6) months in one (1) month increments. Rental extensions may terminate the rental of one or more units based on use by NNSY. This charge will be prorated.

5. Contractor Requirements:

5.1 Contractor shall supply POC’s information (name and phone number) on the equipment.

5.2 Deliver and pick up air compressors at Naval Operating Base (NOB) Norfolk, Virginia. Exact location to be determined at delivery by POC.

5.3 Deliver regenerative air dryer units to Naval Operating Base (NOB) Norfolk, Norfolk, Virginia.

Exact location to be determined at delivery by POC.

5.4 Pick up regenerative air dryer units at Norfolk Naval Shipyard (NNSY), Portsmouth, Virginia.

Exact location to be determined at pick up by POC.

5.5 If necessary, after delivery, connect any accessory equipment to the air compressors and/or regenerative air dryers. Ensure the air compressors and regenerative air dryer units are set up and ready for NNSY to connect shipboard when required.

5.6 Contractors provide any material that is required for proper operation of the air compressors and/or regenerative air dryers and accessory equipment throughout the rental period at no extra cost.

5.7 Provide engineering drawings or sketches showing the general arrangement of the air compressors and regenerative air dryer units. These drawings and sketches shall show the flow path through the air compressors and regenerative air dryer units and all auxiliary equipment that are part of the system.

5.8 Provide the separate commercial operating instruction manuals for the air compressors and regenerative air dryer units and all other major components.

5.9 Provide 24 hours a day, seven-days a week on-call repair service during the rental period at no additional charge. The contractor will be responsible for initiating repairs on-site, at Naval Operating Base (NOB) Norfolk and/or Norfolk Naval Shipyard (NNSY), within 24 hours of verbal or written notification that the equipment has malfunctioned at no additional charge. The contractor will replace the malfunctioning unit or component if the air compressors and/or regenerative air dryer units cannot be returned to service within 72 hours of being notified of the original malfunction at no additional charge. Provide all parts requiring repair or replacement at no additional charge.

5.10 When the equipment is required to be moved to the contractor's facility for repair or replacement, the contractor shall be responsible for loss or damage from the time it leaves the government site until it is returned to the government site.

5.11 Contact the Temporary Service Zone Manager (TSZM) for authorization prior to any work or maintenance on rental unit.

5.12 For lost items by Government personnel and equipment damaged beyond normal wear and tear, Contractor must submit a claim separate from rental. This is to be submitted no later than 60 days past the end of the rental period.

5.13 The Government reserves the right to return air compressors and/or dryer units at any time prior to the expiration of the rental period. The contractor agrees to prorate costs for the time the air compressors and/or regenerative air dryers are in use by NNSY only. The Government agrees to give the contractor twenty-four (24) hours-notice for the return of the air compressors and/or regenerative air dryer units if the return is prior to the expiration of rental period.

5.14 Contractor to provide options to allow NNSY to extend rental of air compressors and/or regenerative air dryer units on a monthly basis. The Government reserves the right to extend the rental period on a monthly basis if necessary for up to six (6) months. The Government reserves the right to return any number of units at any time prior to the expiration of the extension rental period. The contractor agrees to prorate costs for the time the air compressors and regenerative air dryer units are in use by NNSY only.

5.15 Contractor to contact 10 business days prior to the end of rental period to confirm pickup date.

5.16 Preparation For Delivery:

5.16.1 The air compressors and regenerative air dryer units must be preserved and packaged per the manufacturer's commercial practice. Packing shall be in a manner that will ensure acceptance by a common carrier and safe delivery at the destination. The shipping container and method of packing must comply with the Uniform Freight Classification Rules or other carrier regulation as applicable to the mode of transportation.

6. Government Responsibility:

6.1 Provide operators for equipment.

6.1.1 Perform basic monitoring/visual checks.

6.1.2 Equipment movements within or to/from NNSY/NOB.

6.1.3 Provide point of contact for delivery, escort and notification to contractor for rental pickup.

6.1.4 Lost items and equipment damage beyond normal wear and tear

7. Safety Requirements:

7.1 "Per FAR 22.102-1(a) entitled "Safety", Contractors are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard cognizance must follow Federal and State OSHA requirements OSHE OSHECM Chapter Hazardous Energy Control (HEC) requirements or safety requirements for site specific location of the contract.

a. Contractors and Non-NNSY Government Agencies (NNGAs) are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard (NNSY) cognizance must adhere to Federal OSHA requirements for hazardous energy control IAW 29 CFR 1915.89 and must follow Hazardous Energy Control (HEC) procedures as identified in NAVSEA’s Occupational Safety, Health, and Environment Corporate Manual (OSHECM) Chapter 250 (latest revision), when performing work under NNSY contract. All HEC work to be performed by Contractors and NNGAs requires that NNSY Technical Points of Contact (TPOCs) and/or Contracting Officer’s Representatives (CORs) be notified of the HEC scope of work prior to starting work. Any changes or deviations in the initial scope of HEC work requires the NNSY TPOCs and/or CORs be informed of the change/deviation. Appendix 250.B- 1 through B-3 of OSHECM Chapter 250 for multiple employer work identifies when Contractors and NNGAs are required to assign their Lockout/Tags-Plus Coordinator (LOTC) to coordinate HEC work with the cognizant NNSY LOTC. HEC locks shall be provided by the contractor or NNGA for their employees use. The HEC locks shall have red bodies with name labels or name tags affixed, identifying who installed the HEC lock(s) and a point of contact telephone number. HEC lock name labels and tags must be made of materials that will hold up to the environment to which they are exposed. HEC tags used for Tags-Plus HEC work shall be provided by the cognizant NNSY LOTC to the contractor or NNGA for their use if machinery, equipment, or systems (MES) cannot be locked out. OSHECM Chapter 250 Tags-Plus procedures will be strictly followed.

b. Contractors and NNGAs may obtain electronic copies of OSHECM Chapter 250 (latest revision) and access the OSHA 1915.89 web site by using the following link to NNSY’s public access web site: http://www.navsea.navy.mil/shipyards/norfolk/default.aspx

c. Names and contact information for NNSY LOTCs and/or the Building Monitor will be provided by NNSY TPOC and/or Contracting Officer Representative set forth elsewhere in this award document.

8. DBIDS

Identification Badges and Installation Access.

• Any new contractor, vendor or supplier requesting base access AFTER 31 May 2017 will be required to obtain a DBIDS credential. NCACS credentials will no longer be issued.

• Only DBIDS credentials will be issued to ALL contractors, vendors and suppliers seeking base access AFTER 14 August 2017.

Defense Biometric Identification System (DBIDS) increases installation security and communications by receiving frequent database updates on changes to personnel/credential status, law enforcement warrants, lost/stolen cards, and force protection conditions. The system provides a continuous vetting anytime the DBIDS card is scanned at an installation entry point.

If you currently have a Navy Commercial Access Control System (NCACS) card, the following is required to get a DBIDS credential:

• Present your NCACS Card and a completed copy of the SECNAV FORM 5512/1 to the base Visitor Control Center representative.

• The VCC will pull up your information in the computer, ensuring all information is current and correct.

• Once your information is validated, a temporary DBIDS credential is provided.

• Your temporary credential will have an expiration date, prior to which you will need to obtain your permanent DBIDS credential (~ 90 days).

• For each additional U.S. Navy installation to which you need access, the first time you visit you only need to bring your DBIDS credential and statement of purpose for base access when arriving at the Visitor Control Center.

• The representative will enter base access authorization and then you may proceed to work.

If you do NOT have an NCACS Card, the following is required to obtain a DBIDS credential:

• Present a letter or official document from my government sponsoring organization that provides the purpose for your access.

• Present valid identification, such as a passport or Real ID Act-compliant state driver's license.

• Present a completed copy of the SECNAV 5512/1 form to obtain your background check.

• Upon completion of the background check, the Visitor Control Center representative will complete the DBIDS enrollment process, which includes your photo, finger prints, base restrictions, and several other assessments; after all this is done, you will be provided with your new DBIDS credential.

• You may now proceed to work.

FOR ADDITIONAL QUESTIONS ABOUT OBTAINING A DBIDS CARD, CONTACT YOUR LOCAL BASE

VISITOR CONTROL CENTER. INFORMATION IS ALSO PROVIDED AT: www.cnic.navy.mil/om/dbids.html

1.2. One-Day Passes. Participation in the DBIDS is not mandatory, and if the Contractor chooses to not participate, the Contractor's personnel will have to obtain daily passes, be subject to daily mandatory vehicle inspection, and will have limited access to the installation. The Government will not be responsible for any cost or lost time associated with obtaining daily passes or added vehicle inspections incurred by non-participants in the DBIDS.

PORTABLE ELECTRONIC DEVICES (PEDs) In accordance with COMSUBLANT/COMSUBPACINST 2075.1C, the use of Portable Electronic Devices (PEDs) while in or on Department of Navy Submarine spaces are prohibited. A portable electronic device (PED) is defined as any non-stationary electronic apparatus with singular or multiple capabilities of, but not limited to recording, storing, and/or transmitting data, voice, video, or photo images (e.g., cell phones, laptops, tablets and wearable devices such as fitness bands and smart watches).

APPENDIX “A”

Interface Requirements

For Rental Equipment Hook-up To NNSY Temporary Service

NOTE: All Rental Equipment received by NNSY must be supplied with proper interface connectors shown below to allow hook-up by NNSY Shop 99. There may be specific equipment that will require NNSY Shop 99 evaluation to determine proper cabling and connectors.

Mechanical Service: Shall have 2” Male NPT inlet and outlet connections.

110-120 VAC Service: Material Manufactured by Duraline 20 Amp or less- 3 foot tail of 12/3 cable w/3MT20 crowsfoot plug Over 20 Amp and up to 50 Amp : 3 foot tail of 6/3 cable w/3MT50 crowsfoot plug

440 VAC Service: Material Manufactured by Duraline 20 Amp or less- 3 foot tail of 12/4 cable w/ 4MT20 crowsfoot plug Over 20 Amp and up to 50 Amp- 3 foot tail of 6/4 cable w/ 4MT50 crowsfoot plug Above can also be used on 220VAC Any service over 50 Amp requires box cable

440 VAC 50-100 Amp Service: Material manufactured by Crouse Hinds 50- 100 Amps 3-5 foot length of 2/4 cable w/male camlock twist connectors:

Part Numbers:

Brass -A200036-2 Black Sleeve- A200706-7 White Sleeve- A200706-12 Red Sleeve-A200706-9

Over 100 and up to 225 Amps: 3- 5 foot length of 3 conductor 3/0 cable with camlock connectors:

Part Numbers:

Brass - A200038-2 Black Sleeve- A2000706-13 White Sleeve-A2000706-18 Red Sleeve- A2000706-15

Over 225 and up to 400 Amps: 5-15 length of 500 MCM cable w/camlock connectors:

Part Numbers:

Brass- A20028-2 Black Sleeve-A200056- White Sleeve-A200056-6 Red Sleeve- A200056-3

INSTRUCTIONS TO OFFERORS

52.212-1 - Instructions to Offerors -- Commercial Products and Commercial Services (SEP 2023)

Addendum to 52.212-1 Instructions to Offerors – Commercial Products and Commercial Services (SEP 2023)

1) Inquiries - Inquiries and all correspondence concerning this solicitation document should be submitted in writing to Eboni Uwuseba at eboni.w.uwuseba.civ@us.navy.mil and also to Shakir Shinaba at shakir.o.shinaba.civ@us.navy.mil by 2:00 pm EST on Sept. 16, 2024. The Government is not required to provide responses to vendor’s inquiries or correspondence.

It is the quoter‘s sole responsibility to ensure that any quote, to include any other email correspondence, transmitted to the specified Government representative(s) is received prior to the due date specified herein.

The quoter’s are highly encouraged to contact the RFQ’s specified Government representative(s) prior to the RFQs date for receipt of quotes to ensure the Government receipt of the transmitted quote and to ensure quote eligibility. Quotes received after the date and time specified in the RFQ may render it ineligible for consideration or evaluation.

2) Quote Preparation The following instructions apply for the submission of quotes:

a. Quotes shall be submitted in two separate volumes:

Volume I –Technical Specifications and Delivery Volume II – Price

b. The technical quote shall not contain any reference to price. It is incumbent upon the vendor to provide a Technical Quote in sufficient detail to provide a clear and concise presentation that includes, but is not limited to, the technical requirements of the Request for Quote (RFQ).

c. The Government will evaluate quotes in accordance with the evaluation criteria set forth in FAR 52.212-2 of this RFQ.

3) Price Quote Instructions

The price quote shall be submitted separately from the Technical Specifications using the CLIN Structure on page 2 thru 8 of this solicitation.

4) Technical Specification Instructions

Vendor shall certify for equipment being quoted that their product meets each capability listed below and in the SOW by initialing below. In order to be considered for award, this must be completed and submitted with your quote.

Vendor hereby certifies that their service meets or exceeds all specifications in this solicitation and found within the SOW, in their entirety, with no exceptions. ________________________ (Initial)

52.212-2 – Evaluation – Commercial Products and Services (Nov 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible vendor whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. Noncompliance with the solicitation requirements will raise serious concern regarding a quoter’s technical ability to fulfill this requirement and may be grounds to eliminate the quote from further consideration for contract award. The following non- price factors shall be used to evaluate offers:

Technical Specifications Delivery

Technical Specification and Delivery, when combined, are significantly more important than price.

Price: The Government will evaluate the quoted prices to determine if they are fair and reasonable. The price quote shall include a unit price for each item and a total firm-fixed-price for all line items. The evaluated price will be determined by adding the sum of the extended pricing for CLIN 0001 through CLIN 0003, CLIN 1001-6001, and also CLIN 1002-6002.

Each Vendor’s price quote must be based on the Government’s specifications and other contractual requirements. If the prices to be used are based on a published price list or catalog, the Vendor shall so state, and provide a copy of the document with its price quote. If the prices are to be based on established market prices, not otherwise published, or are prices applicable only to the proposed contract, the Vendor shall so state.

The Government intends to award without discussions; however, the Government may conduct discussions if determined necessary. Each quoter should recognize that its initial price and non-price quote may be used as the sole and final basis for award and should quote accordingly.

Evaluations will be based solely on the materials included in the quotes. Therefore, the Vendor’s initial quote should contain their best terms. After receipt of quotes, the Government will conduct an evaluation. However, during the evaluation process, the Government may, solely at its discretion, communicate with quoters regarding clarification of quote elements. At any time prior to selection, including upon receipt of quotes, the Government may exclude a quote from further consideration for any material failure to follow instructions or including the omission of required information.

(b) Options: Provide options to allow NNSY to continue rental of air conditioner(s) and air dryer(s) in one month increments. The government reserves the right to extend the rental period for an additional six (6) months (180 days) in monthly (30- day) increments. The rental of one or more units may be terminated based on use by NNSY.

This charge will be prorated.

(c) A written notice of award or acceptance of a quote, mailed or otherwise furnished to the successful vendor within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party.

Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of Provision)

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job Rental Equipment

FFP

Service rental from vendor to provide three (3) Grade D Air Compressors in accordance with the Statement of Work Daily rate Weekly rate (with a week equal to 7 days) Monthly rate ( with a week equal to 30 days) FOB: Destination

MILSTRIP: N4215824RC40961

PURCHASE REQUEST NUMBER: N4215824RC40961

PSC CD: W043

NET AMT

0002 1 Job Rental Equipment

FFP

Service rental from vendor to provide three (3) Regenerative Air Dryers in accordance with the Statement of Work Daily rate Weekly rate (with a week equal to 7 days) Monthly rate ( with a week equal to 30 days) FOB: Destination

MILSTRIP: N4215824RC40961

0003 1 Job Freight

FFP

Roundtrip lump sum FOB: Destination

MILSTRIP: N4215824RC40961

1001 1 Job OPTION Rental Equipment

FFP

Service rental from vendor to provide three (3) Grade D Air Compressors in accordance with the Statement of Work Daily rate Weekly rate (with a week equal to 7 days) Monthly rate ( with a week equal to 30 days) FOB: Destination

1002 1 Job OPTION Rental Equipment

FFP

Service rental from vendor to provide three (3) Regenerative Air Dryers in accordance with the Statement of Work Daily rate Weekly rate (with a week equal to 7 days) Monthly rate ( with a week equal to 30 days)

2001 1 Job OPTION Rental Equipment

FFP

Service rental from vendor to provide three (3) Grade D Air Compressors in accordance with the Statement of Work Daily rate Weekly rate (with a week equal to 7 days) Monthly rate ( with a week equal to 30 days)

2002 1 Job OPTION Rental Equipment

FFP

Service rental from vendor to provide three (3) Regenerative Air Dryers in accordance with the Statement of Work Daily rate Weekly rate (with a week equal to 7 days) Monthly rate ( with a week equal to 30 days)

3001 1 Job OPTION Rental Equipment

FFP

Service rental from vendor to provide three (3) Grade D Air Compressors in accordance with the Statement of Work Daily rate Weekly rate (with a week equal to 7 days) Monthly rate ( with a week equal to 30 days)

3002 1 Job OPTION Rental Equipment

FFP

Service rental from vendor to provide three (3) Regenerative Air Dryers in accordance with the Statement of Work Daily rate Weekly rate (with a week equal to 7 days) Monthly rate ( with a week equal to 30 days)

4001 1 Job OPTION Rental equipment

FFP

Service rental from vendor to provide three (3) Grade D Air Compressors in accordance with the Statement of Work Daily rate Weekly rate (with a week equal to 7 days) Monthly rate ( with a week equal to 30 days)

4002 1 Job OPTION Rental Equipment

FFP

Service rental from vendor to provide three (3) Regenerative Air Dryers in accordance with the Statement of Work Daily rate Weekly rate (with a week equal to 7 days) Monthly rate ( with a week equal to 30 days)

5001 1 Job OPTION Rental Equipment

FFP

Service rental from vendor to provide three (3) Grade D Air Compressors in accordance with the Statement of Work Daily rate Weekly rate (with a week equal to 7 days) Monthly rate ( with a week equal to 30 days)

5002 1 Job OPTION Rental Equipment

FFP

Service rental from vendor to provide three (3) Regenerative Air Dryers in accordance with the Statement of Work Daily rate Weekly rate (with a week equal to 7 days) Monthly rate ( with a week equal to 30 days)

6001 1 Job OPTION Rental Equipment

FFP

Service rental from vendor to provide three (3) Grade D Air Compressors in accordance with the Statement of Work Daily rate Weekly rate (with a week equal to 7 days) Monthly rate ( with a week equal to 30 days)

6002 1 Job OPTION Rental Equipment

FFP

Service rental from vendor to provide three (3) Regenerative Air Dryers in accordance with the Statement of Work Daily rate Weekly rate (with a week equal to 7 days) Monthly rate ( with a week equal to 30 days)

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 1001 Destination Government Destination Government 1002 Destination Government Destination Government 2001 Destination Government Destination Government 2002 Destination Government Destination Government 3001 Destination Government Destination Government 3002 Destination Government Destination Government 4001 Destination Government Destination Government 4002 Destination Government Destination Government 5001 Destination Government Destination Government 5002 Destination Government Destination Government 6001 Destination Government Destination Government 6002 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 23-SEP-2024 TO

13-JAN-2025

N/A NORFOLK NAVAL SHIPYARD

SEE SCHEDULE

SEE STATEMENT OF WORK

PORTSMOUTH VA 23709-5000

N42158

0002 POP 23-SEP-2024 TO

13-JAN-2025

N/A (SAME AS PREVIOUS LOCATION)

0003 POP 23-SEP-2024 TO

13-JAN-2025

N/A (SAME AS PREVIOUS LOCATION)

1001 POP 14-JAN-2025 TO

12-FEB-2025

N/A (SAME AS PREVIOUS LOCATION)

1002 POP 14-JAN-2025 TO

12-FEB-2025

N/A (SAME AS PREVIOUS LOCATION)

2001 POP 13-FEB-2025 TO

14-MAR-2025

N/A (SAME AS PREVIOUS LOCATION)

2002 POP 13-FEB-2025 TO

14-MAR-2025

N/A (SAME AS PREVIOUS LOCATION)

3001 POP 15-MAR-2025 TO

14-APR-2025

N/A (SAME AS PREVIOUS LOCATION)

3002 POP 15-MAR-2025 TO

14-APR-2025

N/A (SAME AS PREVIOUS LOCATION)

4001 POP 15-APR-2025 TO

14-MAY-2025

N/A (SAME AS PREVIOUS LOCATION)

4002 POP 15-APR-2025 TO

14-MAY-2025

N/A (SAME AS PREVIOUS LOCATION)

5001 POP 15-MAY-2025 TO

14-JUN-2025

N/A (SAME AS PREVIOUS LOCATION)

5002 POP 15-MAY-2025 TO

14-JUN-2025

N/A (SAME AS PREVIOUS LOCATION)

6001 POP 15-JUN-2025 TO

14-JUL-2025

N/A (SAME AS PREVIOUS LOCATION)

6002 POP 15-JUN-2025 TO

14-JUL-2025

N/A (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.203-12 Limitation On Payments To Influence Certain Federal

Transactions

JUN 2020

52.204-13 System for Award Management Maintenance OCT 2018 52.204-14 Service Contract Reporting Requirements OCT 2016 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-21 Basic Safeguarding of Covered Contractor Information Systems

NOV 2021

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

NOV 2021

52.204-27 Prohibition on a ByteDance Covered Application JUN 2023 52.209-10 Prohibition on Contracting With Inverted Domestic

Corporations

NOV 2015

52.212-4 Contract Terms and Conditions--Commercial Products and Commercial Services

NOV 2023

52.219-6 Notice Of Total Small Business Set-Aside NOV 2020 52.219-8 Utilization of Small Business Concerns FEB 2024 52.219-28 Post-Award Small Business Program Rerepresentation FEB 2024 52.222-21 Prohibition Of Segregated Facilities APR 2015 52.222-26 Equal Opportunity SEP 2016 52.222-40 Notification of Employee Rights Under the National Labor

Relations Act

DEC 2010

52.222-41 Service Contract Labor Standards AUG 2018 52.222-50 Combating Trafficking in Persons NOV 2021 52.225-13 Restrictions on Certain Foreign Purchases FEB 2021 52.227-1 Authorization and Consent JUN 2020 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

MAR 2023

52.233-1 Disputes MAY 2014 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.242-13 Bankruptcy JUL 1995 52.247-34 F.O.B. Destination JAN 1991 52.252-1 Solicitation Provisions Incorporated By Reference FEB 1998 52.252-5 Authorized Deviations In Provisions NOV 2020 52.252-6 Authorized Deviations In Clauses NOV 2020 252.201-7000 Contracting Officer's Representative DEC 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7009 Limitations on the Use or Disclosure of Third-Party

Contractor Reported Cyber Incident Information

JAN 2023

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

MAY 2024

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

JAN 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

JAN 2023

252.223-7006 Prohibition On Storage, Treatment, and Disposal of Toxic or Hazardous Materials

SEP 2014

252.223-7008 Prohibition of Hexavalent Chromium JAN 2023 252.225-7048 Export-Controlled Items JUN 2013 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.243-7002 Requests for Equitable Adjustment DEC 2022 252.244-7000 Subcontracts for Commercial Products or Commercial

Services

NOV 2023

CLAUSES INCORPORATED BY FULL TEXT

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAY 2024)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (DEC 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.]

X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

___ (4) 52.203-17, Contractor Employee Whistleblower Rights (NOV 2023) (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community--see FAR 3.900(a).

X (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L. 109-

282) (31 U.S.C. 6101 note).

___ (6) [Reserved]

___ (7) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-117, section 743 of Div.

C).

___ (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub.

L. 111-117, section 743 of Div. C).

___ (9) 52.204-27, Prohibition on a ByteDance Covered Application (JUN 2023) (Section 102 of Division R of Pub. L. 117-328).

___ (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders--Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (DEC 2023) (Pub. L. 115-390, title II).

___ (11)(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders--Prohibition. (DEC 2023) (Pub. L.

115-390, title II).

___ (ii) Alternate I (DEC 2023) of 52.204-30.

X (12) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) (31 U.S.C. 6101 note).

___ (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 U.S.C. 2313).

____ (14) [Reserved]

____ (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (OCT 2022) (15 U.S.C. 657a).

X (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (17) [Reserved]

X (18)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-6.

____ (19)(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-7.

X (20) 52.219-8, Utilization of Small Business Concerns (FEB 2024) (15 U.S.C. 637(d)(2) and (3)).

____ (21)(i) 52.219-9, Small Business Subcontracting Plan (SEP 2023) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (NOV 2016) of 52.219-9.

____ (iii) Alternate II (NOV 2016) of 52.219-9.

____ (iv) Alternate III (JUN 2020) of 52.219-9.

____ (v) Alternate IV (SEP 2023) of 52.219-9.

____ (22) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

____ (ii) Alternate I (MAR 2020) of 52.219-13.

____ (23) 52.219-14, Limitations on Subcontracting (OCT 2022) (15 U.S.C. 657s).

____ (24) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C. 637(d)(4)(F)(i)).

____ (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (FEB 2024) (15 U.S.C. 657f).

____ (26) (i) 52.219-28, Post-Award Small Business Program Rerepresentation (FEB 2024) (15 U.S.C. 632(a)(2)).

____ (ii) Alternate I (MAR 2020) of 52.219-28.

____ (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women- Owned Small Business Concerns (OCT 2022) (15 U.S.C. 637(m)).

____ (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (OCT 2022) (15 U.S.C. 637(m)).

____ (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

____ (30) 52.219-33, Nonmanufacturer Rule (SEP 2021) (15 U.S.C. 657s).

X (31) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

____ (32) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (FEB 2024) (E.O. 13126).

X (33) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

X (34)(i) 52.222-26, Equal Opportunity (SEP 2016) (E.O. 11246).

____ (ii) Alternate I (FEB 1999) of 52.222-26.

X (35)(i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

____ (ii) Alternate I (JUL 2014) of 52.222-35.

X (36)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

____ (ii) Alternate I (JUL 2014) of 52.222-36.

X (37) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

X (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O.

13496).

X (39)(i) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (40) 52.222-54, Employment Eligibility Verification (MAY 2022). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

____ (41)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (MAY 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (MAY 2024) (42 U.S.C. 7671, et seq.).

____ (43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (MAY 2024) (42 U.S.C. 7671, et seq.).

____ (44) 52.223-20, Aerosols (MAY 2024) (42 U.S.C. 7671, et seq.).

____ (45) 52.223-21, Foams (MAY 2024) (42 U.S.C. 7671, et seq.).

____ (46) 52.223-23, Sustainable Products and Services (MAY 2024) (E.O. 14057, 7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

____ (47) (i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

____ (ii) Alternate I (JAN 2017) of 52.224-3.

____ (48) (i) 52.225-1, Buy American--Supplies (OCT 2022)) (41 U.S.C. chapter 83).

____ (ii) Alternate I (OCT 2022) of 52.225-1.

____ (49) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (NOV 2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I [Reserved].

____ (iii) Alternate II (DEC 2022) of 52.225-3.

____ (iv) Alternate III (FEB 2024) of 52.225-3.

____ (v) Alternate IV (OCT 2022) of 52.225-3.

____ (50) 52.225-5, Trade Agreements (NOV 2023) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

X (51) 52.225-13, Restrictions on Certain Foreign Purchases…