Combined Synopsis N0024423Q0284.pdf

This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

This announcement constitutes the only solicitation; a Request for Quotation (RFQ) is being requested and a written solicitation will not be issued. The Solicitation number is N0024423Q0284. The solicitation document and incorporated provisions and clauses are those in effect through latest Federal Acquisition

Circular and DFARS change notices. This solicitation is issued as Service-Disabled Veteran-Owned. NAICS

Code 611519 Other Technical and Trade Schools is applicable and business size is $21M. The solicitation will start on the date this solicitation is posted and will end on 29 August 2023 9:00 AM Pacific Standard

Time.

Contractor must complete all Representations and Certifications found in the provisions listed below within their profile in the System for Award Management (SAM) at http://www.sam.gov to be considered for this solicitation.

Requirements

The Underwater Construction Team Two, located in Port Hueneme, California has a requirement for qualified combatant craft boat operators to support deployment requirements. The requirements under this procurement supports the UCT-2’s Training Department in providing Technical Training Support Services on an interim basis for deploying personnel. Specifically, these services shall be to conduct Small Combatant

Craft Operator Training courses. Currently no formal Navy owned training programs exist to properly train and qualify Boat Operators assigned to UCT-2. The option of contracting a firm who specializes in the proper tactical use of the assigned UCT- 2 combatant craft would be the best method to fill the current training gap. These courses of instruction will provide basic and advanced boat operator skills-sets, tactics, techniques, standard operating procedures, technical knowledge, and experience of assigned combatant craft’s engineering systems, operation systems, navigation systems, and communication systems.

This will be a single one time course.

Refer to statement of work for full detail.

Qty. 1 Group

Period of Performance:

25 September 2023 through 13 October 2023

Delivery: FOB Destination. Port Hueneme, California

Inspection and acceptance: At Destination by the Government.

Contract Type: Order/ Contract resulting from this solicitation will be Firm Fixed Price (FFP).

Statement of Work (SOW)

Rigid Hull Inflatable Boat (RHIB) Operator

Course Technical Training Support Services for

Underwater Construction Team Two (UCT-2)

Port Hueneme, CA

1.0 Background

The Underwater Construction Team Two provides a capability for construction, inspection, repair, and maintenance of ocean facilities in support of Naval and Marine Corps operations, to include repair of battle damage. Maintain capability to support a Fleet Marine Force (FMF) amphibious assault, subsequent combat service support ashore, and self-defense for their camp and facilities under construction. In time of emergency or disaster, conduct disaster control and recovery operations.

2.0 Scope

The Underwater Construction Team Two, located in Port Hueneme, California has a requirement for qualified combatant craft boat operators to support deployment requirements. The requirements under this procurement supports the UCT-2’s Training Department in providing Technical Training Support Services on an interim basis for deploying personnel. Specifically, these services shall be to conduct Small Combatant Craft Operator Training courses. Currently no formal Navy owned training programs exist to properly train and qualify Boat Operators assigned to UCT-2. The option of contracting a firm who specializes in the proper tactical use of the assigned UCT- 2 combatant craft would be the best method to fill the current training gap. These courses of instruction will provide basic and advanced boat operator skills-sets, tactics, techniques, standard operating procedures, technical knowledge, and experience of assigned combatant craft’s engineering systems, operation systems, navigation systems, and communication systems.

3.0 Applicable Documents

3.1 COMDINST M16672.2D Rules of the Road

3.2 NTTP 3-20.6.29M Tactical Boat Operations

3.3 OPNAVINST 1500.75A Safety Policy and Procedures for Conducting High Risk Training

3.4 CNETINST P-1552/16 Navy Swimming and Water Survival Manual

3.5 NAVEDTRA 130 Task Based Curriculum Development Manual

3.6 NAVEDTRA 133A Training Requirements Review Management Manual

3.7 Applicable RHIB operations and maintenance manuals.

3.8 NAVEDTRA 43152-J (April 2014) Personal Qualification Standard (PQS) for Forces Afloat, Small Boat

Operations

4.0 Requirements

4.1 Small Boat Operator Training Course of Instruction (COI) – This course(s) will support the overall small boat maritime training pipeline for UCT-2 Detachments. Students will train on the assigned

UCT-2 combatant craft for mission operations, and unit level operational maintenance. In accordance with references

2.1 through 2.8 (above), applicable PQS and JQRs, the contractor will provide an Instructor Planning Document

[Lesson Plan], Student Guides [Trainee Guides], supporting media presentations, performance evolution sheets, Training Course Control Document, the Testing Plan and Testing Materials and finally a Post Training Operations report. All course curriculum baseline materials must be submitted for a review and consideration 30- days prior to the scheduled class start date(s). This course of instruction will provide a qualification program for assigned craft to include underway evaluations, oral boards, and written test.

Curriculum Changes – After each course delivery, any identified course changes or issues must be noted in the

Post Training Operations report, along with plans and timeline to correct materials. Changes to material will be incorporated by the contractor a minimum of 30 days prior to the next scheduled class start date. For reference, any changes from baseline must be tracked in the foreword of the Lesson Plan.

The Curriculum Outline of Instruction shall adhere to the following guidelines: present a clear understanding of the requirements; time sensitivity; degree of detail required; complexity of the tasks and subtasks; classroom Instructor

Lead Training (ILT), and practical application - pier side training and underway environments. Trainee

Guide and Lesson Plan shall [at a minimum] include the items listed below:

1. Introduction & Orientation

a) Introductions

b) Orientation

c) Course Overview

d) Mission Statement

e) Course Master Schedule (CMS) Review

f) Topic Overview

g) Training Time Out (TTO)

h) Emergency Action Plan (EAP)

i) Crew Assignments

j) Class Leader roles and responsibilities

2. Operational Risk Management (ORM)

a) ORM Terms

b) Common Mishaps

c) Three Levels of ORM

d) Principles of ORM

e) Five Step Process

f) Time Critical ORM

g) Assessment and Mitigations of Hazards

h) ORM Sheet & Briefing

3. Mission Planning

a) Introduction

b) Military Mission Planning

c) Time-Sensitive Planning

d) Mission Analysis for Small Boat Ops

e) Supported vs Supporting

f) Types of control

g) Mission Planning Small Boat Operations

h) Boating Safety Considerations

i) Boat Crew PPE

j) Building SOPs

k) Evolution Brief

4. Boat Characteristics for the assigned RHIBs

a) Craft Characteristics

b) Fluids and Operation Parameters

c) Specifications

d) Safety Equipment

e) References and Policies

5. Communications

a) Communications Planning

b) AN/PRC150

c) ANPRC152

6. Pre/Post Operational Checks

b) Startup Procedures

c) Shut Down Procedures

d) Pre-Operational Checklist

e) Post-Operational Checklist

f) Pre-Underway Evolution Safety Checklist

g) Fueling Safety and Procedures

7. Engineering Systems

a) System Components and Component parts:

1) Hydraulics

2) Propulsion jets

3) Electrical (12/24VDC and 110VAC)

4) Smart ship/vessel view

5) Trim tabs

6) Batteries

7) Bilge pumps

8) Cooling System

b) Engine Starting System-Electrical System

c) Fuel-Steering-Drainage Systems

d) Outboard Engine

e) Troubleshooting

f) Boat Maintenance

8. Rules of the Road

b) General Rules

c) Conditions of visibility

d) Vessels in site of each other

e) Restricted visibility

f) Lights, Shapes and Sound Signals

g) Maneuvering and warning signals

h) Exemptions

9. Aids to Navigation

b) Buoyage Systems

c) Primary Seacoast and Secondary Lights

d) Fixed Markers

e) Ranges and Directional Lights

f) Fog Signals

g) Weather

10. Plotting and Piloting

b) Navigations Tools

c) Nautical Charts

d) The Compass Rose

e) U.S. Charts

f) Plotting

g) Plotting a Point

h) Measuring Distance and Direction

i) Elements of Piloting

j) Time, Speed, Distance Calculations

k) Lines of positions (LOPs)

l) Dead Reckoning

11. Boat Handing and Maneuvering

b) System Functions

c) Bumper Drills

d) Waves and Effects

e) Chase the Rabbit

f) Vessel Approach and Station Keeping (alongside, mooring)

g) Underway Dead Reckoning (DR)

12. RADAR/GPS Plotter

a) Terminology

b) Basic RADAR Principles

c) Global Positioning System (GPS)

d) RADAR controls

e) Using RADAR to navigate

f) The FURUNO RADAR Familiarization

g) GPS Plotter Familiarization

h) Troubleshooting

i) Safety Concerns

13. Navigation

a) Elements of piloting

b) “Lines of Position” and how to obtain them

c) Magnetic and True courses and how to obtain them

d) Using nautical charts while underway to continually determine position.

e) Dead Reckoning Navigation – practiced underway.

f) Various navigation tools used – perform plotting and piloting for “live” use while underway.

g) Plot Plan of Intended Movement (PIM) and follow while underway

14. Knowledge Assessment Program

a) Pre-Test

b) Quizzes (when applicable)

c) Post Test

15. Practical Application Program

a) Refueling Operations from pier side

b) Under Way Drills (anchor, ship alongside and station keeping)

c) Night underway navigation

d) Casualty Control Drills (fire, flooding, man overboard)

16. Performance of abnormal non-standard operations

a) Towing (long/short/alongside)

b) Single engine maneuvering when towing another RHIB

c) Emergency tiller

17. Qualification Program

a) Written Test for 7m, 9M, 36’ Dive Boat

b) Oral Board questions, scenarios

c) Underway evaluation Plan and Forms

4.1.1 The ‘Post Training Report and Operations Report’ will be developed and delivered within 3 weeks of the end of the course. The report will include the following items:

1. Course data information – dates, location, and instructors

2. Summary of the course events

3. Key Statistics from the class – PQS sections covered by percentage, and any issues

4. Mission data – hours underway, nautical miles traveled, number of times refueled, fuel used, fuel cost, and any issues

5. Student roster (including rate/rank and command)– and any attendance issues

6. Practical application hours trained

7. Course Master Schedule and/or course planning

8. Course Testing data analysis – and any lessons learned

9. End of Course Critique (EOCC) data – provide copies

10. A comprehensive list of curriculum issues and redline adjudication level of effort (An estimation of hours required to correct curriculum issues)

Course Deliverables

A001-Instructor Planning Document [Lesson Plan]

A002-Student Guides

A003-Post Training and Operations Report

A004-Training Course Control Document, A005- Performance Evolution Sheets A006-

Testing Plan & Testing Materials A007-

Qualification Program Materials

4.1.2 The contractor shall conduct the three-week Small Boat Operator Training Course of

Instruction (COI) for designated UCT-2 Detachments. Class load will have a class maximum of twelve (12) students, with a minimum of six (6) students required to hold the course. All applicable safety requirements (refer to

Section 2.0) shall be adhered to during preparation for conduct of the training.

1. Local and/or command Standard Operating Procedures (SOP)

2. Local and/or command engineering practices

3. US Navy OPNAV INSTR 1500.75 High Risk Instruction

4. USCG Navigation Rules and Regulations Handbook

4.1.3 Instructor Education and Qualifications: At a minimum the contracted personnel conducting the training shall have the qualifications listed below. These qualifications shall be provided to, and vetted and verified by, the bidding contractor via course graduations certificates, letters of appointment, or other substantiating documentations or official correspondence.

1. Boat Captain qualified for the RHIB and/or Naval Special Warfare (NSW) 11M RHIB qualified.

2. Boat Coxswain qualified for the 11-Meter Willard RHIB by the US Navy or Coast Guard.

a) Rationale: To teach a “Train-2-Qualify” Course, the instructor must have been qualified on the platform he/she is instructing.

3. Served in a training department of an active duty or reserve US Navy or US Coast Guard command.

a) Rationale: Instructors will maintain good order and disciple in the classroom using a military system. The instructor must understand this and have been a leader. Instructors also interact with military ranks from E-1 to O-5.

4. Possession of a valid US Coast Guard Masters License - A 100 Ton Masters License with a near coastal endorsement is desirable.

5. The Senior/Lead Instructor must possess of a valid USCG Near Coastal Masters License of 100 Gross Tons or greater.

a) Rationale: This license ensures the customer receives instruction on Rules of The Road.

These are the US Coast Guard recognized boat handling regulations and requirements on the water. This is the etiquette of handling the RHIB around other ships and during all operations while away from the pier. All Navy ships and boats follow these regulations.

6. Navy NEC 9502 instructor qualification (or other service equivalent)

a) Rationale: Students will all be military members; ensures instructors are trained in the delivery of instructional material.

7. Normal color vision (must not be color blind).

a) Rationale: The buoyage system for maritime navigation is color coded.

8. Physically capable of standing for prolonged periods on small boats, while wearing 20 lbs. of flotation, communications, and other gear.

a) Rationale: The instructors will be standing on the boat for 8-12 hours in a normal day during practical application.

9. Capable of working on an open deck RHIB in all weather.

a) Rationale: The operational environment is not always sunny. It rains, there is fog and cold. Instructors must provide their own foul weather gear and safety equipment.

10. Meet US Navy 1st Class swimmer requirements per CNET Inst. P 1552/16

a) Rationale: Practical application tasks place in harbors and open ocean environments in an open cockpit RHIB. Students (or an instructor) may fall into the water.

11. Pass a security background check (National Crime Information Center).

a) Rationale: Working with military members and government equipment the instructor position requires someone without a criminal record.

12. Eligible for, or hold a, valid SECRET clearance.

a) Rationale: While the course in unclassified, access to the command requires a clearance.

13. Possess current CPR/1st Aid Certifications (American Red Cross/American Heart Association).

a) Rationale: The training is at times High Risk and instructors may have the need to administer CPR/1st Aid. Also, portions of training will be offshore, and no medical care is immediately available.

14. Must have a valid state driver’s license.

a) Rationale: The contracted instructors may be required to drive various types of government vehicles while conducting the three week course.

15. Background in the creation and delivery of Concept of Operations (CONOPs) briefing to staff level officers and Government Specialist (GS) personnel.

a) Rationale: The Small Boat (RHIB) Operator Training course has a requirement to create and plan operations with command during the course. This includes the creation of briefs and explanations of RHIB operations which are delivered to the senior staff (CO, XO, Operations Officer). The senior staff has limited time. The instructors must ensure the brief, given by student, is correct and ready for presentation from both an operational point and Operational Risk Management (ORM) point.

16. Small Boat troubleshooting knowledge, skills, and abilities.

a) Rationale: The RHIBs will, from time-to-time, break down or have issues. The course instructors will need to be able to quickly and safety handle these issues.

5.0 Training Dates

5.1 The Period of Performance shall be after award with the training course dates planned for:

Start Date End Date Course Location

RHIB Operator Training 25 September

13 October

Naval Station Port Hueneme, CA

Notes:

1. The training dates and locations are dependent upon student availability. Training will be canceled if the minimum number of students to safely hold the class (6 students) is not met.

2. Training dates may also change due to training and fleet asset availability, or other unforeseen events.

3. If class start/stop dates cannot be moved the class training event will be removed from the schedule.

4. Coordination with the contracted instructors and the government Training Lead, located at Port Hueneme is required.

5. Cancellation notification will be provided by the government 30 days prior to listed class convening date should these requirements are not met.

6.0 Place of Performance

6.1 Small Boat Operator Training shall be performed in/around UCT-2 Port Hueneme, to include local

N0024423Q0284 harbors/bays/open ocean, Travel, lodging, meals will be required. Part of this course of instruction shall also take place on San

Clemente Island. Travel, lodging, meals will be required to, form, and on island. Meetings, curriculum reviews, curriculum development and course preparation may be performed at the contractor’s facility, or a designated

Government facility.

7.0 Security. Access to classified material is not required and classified material will not be generated for this course of instruction. Access to classified or controlled buildings will not be required for instruction.

7.1 Inspection and Acceptance. Inspection and acceptance review(s) will be performed by UCT-2, Training

Department.

1. UCT-2may visit/audit the course during the course offering. UCT-2 will notify the course Lead

Instructor of intended dates of visit.

2. UCT-2 will review, approve, and accept the following deliverables:

a) Instructor Planning Document [Lesson Plan]

b) Student Guide

c) Testing Plan/Testing Materials

d) Training Course Control Document

e) Performance Evolution Sheets

f) Post Training Operations Report

8.0 Training Support Equipment

1. Two (2) craft will be provided on the first day of training from UCT-2.

2. Checkout procedures will be in accordance with references noted in Section 2.

3. While it is required that a military member sign for the craft, the contracted instructors will command the craft during the instructional period and maintain responsibility for the safe handling and condition of the vessels throughout the course until completion.

4. Requirements for returning the craft will be provided when receiving the craft upon issue on the first day of training (or whenever issuing of the craft to support the training session is designated).

5. Craft Fueling operations will be performed during the course. The contracted instructors will supervise and train fueling all operations in accordance with references noted in Section 2.

6. A tool kit will be provided for maintaining the craft during the course, and training students as required.

9.0 Technical Point of Contact and Inspection and Acceptance.

1. The Contracting Officer (KO) has ultimate authority for administration and modification of this contract and is the only Government Representative that has the authority to direct changes. The KO may delegate certain authority through various appointed representatives, including, but not limited to, the

COR,

Technical Assistants, one or more technical monitors, and other Government representatives associated with specific functions. The Contracting Officer’s Representative (COR) and Technical Assistants under this task order are the persons responsible for performing inspection and acceptance of the Contractor’s performance at the destination. Contact information will be disclosed at time of award

End

This solicitation documents and incorporates provisions and clauses in effect through the latest FAC and

DFARS change notices. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.acquisition.gov

Post Award Contract Administration will be performed by NAVSUP Fleet Logistics Center San Diego, https://www.acquisition.gov/

Code 250.

Payment: The US Navy anticipates using Government Purchase Card to pay invoices.

Requests for technical and or contractual clarification are to be submitted in writing. TECHNICAL

QUESTIONS are to be submitted via e-mail to janet.nunez@navy.mil received no later than 28 August

2023 12:00:00 AM Pacific Standard Time. Answers to questions will be provided in the form of an amendment to this solicitation.

The following provisions and clauses are applicable and are hereby incorporated into the solicitation by reference and by full text. It is the responsibility of the interested contractors to obtain copies of the necessary provisions and or clauses that are required as a part of this solicitation. Required clauses/provisions that are not submitted may render a quote not to be accepted by the Government.

THE FOLLOWING NAVSUP LOCAL TEXT IS HEREBY MADE PART OF THE STATEMENT OF

WORK/PERFORMANCE WORK STATEMENT.

NAVSUP FLC San Diego may utilize contractor support through the AbilityOne Program, as needed, to perform contract closeout functions for this acquisition. Information, including business sensitive/confidential or proprietary data, that the offeror provides to the Government or information already in the possession of the Government may be viewed and utilized by the AbilityOne Program support contractor personnel during the course of its contract performance. The information that may be made available to the support contractor may include, for example, pricing and technical proposals, historical contract, pricing and performance information, Commercial Asset Visibility (CAV) reporting information and similar data/information.

By submission of a proposal in response to this solicitation, the offeror and its subcontractors consent to a release of their business sensitive/confidential or proprietary data to the Government's AbilityOne

Program support contractor personnel in order to perform close out services. Prior to the release of any such information to the support contractor, the support contractor will have in place with the Government a Non-Disclosure/Non-Use Agreement in accordance with the terms of the AbilityOne Program support contract.

Offerors may execute their own Non-Disclosure Agreement with the AbilityOne Program (AbilityOne contact information available from the contracting point of contact). The support contractor must provide copies of the executed agreements to the Contracting Officer and the Contracting Officer's Representative

(COR) for the support contract; and the offeror/contractor for this acquisition must provide copies of the executed Agreement to the Contracting Officer for this acquisition. If the offeror/contractor seeks such a

Non-Disclosure Agreement with the AbilityOne Program support contractor, the Agreement must be executed no later than the date of final delivery under the resulting NAVSUP FLC San Diego contract.

REVIEW OF AGENCY PROTESTS

The contracting activity, Fleet Logistics Center San Diego (FLCSD) will process agency protests in accordance with the requirements set forth in FAR 33.103(d).

Pursuant to FAR 33.103(d)(4), agency protests may be filed directly with the appropriate reviewing authority; or, a protester may appeal a decision rendered by a contracting officer to the reviewing authority.

The reviewing authority for FLCSD is the Director, Regional Contracts Department, Fleet Logistics

Center San Diego at 3985 Cummings Road, San Diego, CA 92136-4200. Agency procurement protests should clearly identify the initial adjudicating official, i.e., the "contracting officer" or "reviewing official".

Offerors should note this review of the Contracting Officer's decision will not extend GAO's timeliness requirements. Therefore, any subsequent protest to GAO must be filed within 10 days of knowledge of initial adverse agency action.

UNIT PRICES

Contractor unit prices, when incorporated into a Government contract, may be releasable under the

Freedom of Information Act (FOIA) in the event NAVSUP FLCSD receives a FOIA request.

WAGE DETERMINATION

WD 2015-5625 (Rev.18) and posted on beta.sam.gov is he To view the Ventura County, CA Wage Determination, please visit https://sam.gov/content/wage-determinations

PROVISIONS INCORPORATED BY REFERENCE

52.204-7 System for Award Management OCT 2018

52.204-16 Commercial and Government Entity Code

Reporting

AUG

52.204-24* Representation Regarding Certain

Telecommunications and Video

Surveillance Services or Equipment

NOV

52.209-11 Representation by Corporations Regarding

Delinquent Tax Liability or a Felony

Conviction under any Federal Law

FEB 2016

52.212-1 Instructions to Offerors—Commercial

Products and Commercial Services

52.212-3 Offeror Representations and

Certifications—Commercial Products and

Commercial Services (CD 2023-O0002, Revision 1)

52.252-5 Authorized Deviations in Provisions NOV

252.203-7005 Representation Relating to Compensation of Former DoD Officials

SEP 2022

252.204-7008 Compliance with Safeguarding Covered

Defense Information Controls

OCT 2016

252.204-7016 Covered Defense Telecommunications

Equipment or Services–Representation

DEC 2019

252.204-7017 Prohibition on the Acquisition of Covered

Defense Telecommunications Equipment or

Services–Representation

MAY

252.204-7019 Notice of NIST SP 800-171 DoD

Assessment Requirements.

MAR

https://sam.gov/content/wage-determinations

252.204-7024 Notice on the use of the Supplier

Performance Risk System

MAR

252.215-7007 Notice of Intent to Resolicit MAR

252.225-7000 Buy American–Balance of Payments

Program Certificate–Alternate I

252.225-7021 Trade Agreements--Basic JAN 2023

252.225-7020 Trade Agreements Certificate--Basic NOV

252.225-7031 Secondary Arab Boycott of Israel JUN 2005

252.225-7049 Prohibition on Acquisition of Certain

Foreign Commercial Satellite Services—

Representations

DEC 2018

252.225-7055 Representation Regarding Business

Operations with the Maduro Regime

252.225-7973 Prohibition on the Procurement of Foreign-

Made Unmanned Aircraft Systems—

Representation. (DEVIATION 2020-

O0015)

252.225-7974 Representation Regarding Persons that have

Business Operations with the Maduro

Regime (DEVIATION 2020-O0005)

FEB 2020

252.247-7022 Representation of Extent of Transportation by Sea

JUN 2019

PROVISION BY FULL TEXT

52.212-2 Evaluation—Commercial Items (NOV 2021)

The Government will award on the basis of price and technical, unless the contracting officer is aware of past performance information related to the low price quote/offer which indicates that quote/ offer may not represent best value. In that case, the Government reserves the right to consider the past performance of other quotes/ offers, conduct a price, past performance tradeoff, and award to other than the lowest price quote/offer.

(End of clause)

52.252-5 Authorized Deviations in Provisions.

(a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of “(DEVIATION)” after the date of the provision.

(b) The use in this solicitation of any Defense Acquisition Regulation (48 CFR Chapter 2) provision with an authorized deviation is indicated by the addition of “(DEVIATION)” after the name of the regulation.

(End Provision)

CLAUSES INCORPORATED BY REFERENCE

52.204-8 Annual Representations and Certifications JAN 2022

52.204-9 Personal Identity Verification of Contractor

Personnel

JAN 2011

52.204-13 System for Award Management Maintenance OCT 2018

52.204-18 Commercial and Government Entity Code

Maintenance

AUG 2020

52.204‐19 Incorporation By Reference Of Representations

And Certifications

DEC 2014

52.212-4 Contract Terms and Conditions—Commercial

Items

DEC 2022

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.246-4 Inspection of Services-Fixed-Price AUG 1996

52.247-34 F.o.b. Destination NOV 1991

52.252-2 Clauses Incorporated By Reference FEB 1998

252.203-7000 Requirements Relating to Compensation of

Former DoD Officials

SEP 2011

252.203‐7002 Requirement to Inform Employees of

Whistleblower Rights

DEC 2022

252.204-7003 Control of Government Personnel Work

Product

APR 1992

252.204-7004 DoD Antiterrorism Awareness Training for

Contractors

JAN 2023

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

JAN 2023

252.204-7018 Prohibition on the Acquisition of Covered

Defense Telecommunications Equipment or

Services

JAN 2023

252.204-7022 Expediting Contract Closeout MAY 2021

252.204-7024 Notice on the use of the Supplier Performance

Risk System

MAR 2023

252.223-7008 Prohibition of Hexavalent Chromium JAN 2023

252.225-7001 Buy American and Balance of Payments

Program--Basic

JAN 2023

252.225-7002 Qualifying Country Sources as Subcontractors MAR 2022

252.225-7012 Preference for Certain Domestic Commodities APR 2022

252.225-7048 Export-Controlled Items JUNE 2013

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime

JAN 2023

252.225-7972 Prohibition on the Procurement of Foreign-

Made Unmanned Aircraft Systems.

(DEVIATION 2020-O0015)

MAY 2020

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

DEC 2018

252.232-7009 Mandatory Payment by Governmentwide

Commercial Purchase Card

MAY 2018

252.232-7010 Levies on Contract Payments DEC 2006

252.237-7010 Prohibition on Interrogation of Detainees by

Contractor Personnel

JUN 2013

252.244-7000 Subcontracts for Commercial Items JAN 2023

252.247-7023 Transportation of Supplies by Sea--Basic JAN 2023

52.212-5 Contract Terms and Conditions Required To

Implement Statutes or Executive Orders—

Commercial Items (CD 2018-O0021)

JUN 2023

Clauses below with asterisk are contained within FAR 52.212-5

52.203-19* Prohibition on Requiring Certain Internal JAN 2017

Confidentiality Agreements or Statements

52.204-27* Prohibition on a ByteDance Covered

Application

JUN 2023

52.204-10* Reporting Executive Compensation and First-

Tier Subcontract Awards

JUN 2020

52.204-23* Prohibition on Contracting for Hardware, Software, and Services Developed or

Provided by Kaspersky Lab and Other

Covered Entities

NOV 2021

52.204-25* Prohibition of Contracting for Certain

Telecomunications and Video Surveillance

Services or Equipment

NOV 2021

52.209-6* Protecting the Government’s Interest When

Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment

NOV 2021

52.209-10* Prohibition on Contracting with Inverted

Domestic Corporations

NOV 2015

52.219-27* Notice of Service-Disabled Veteran-Owned

Small Business Set-Aside (CD 2020-O0008)

OCT 2022

52.219-28* Post-Award Small Business Program

Rerepresentation

MAR 2023

52.219-33* Non-Manufacturer Rule (Deviation 2020-

O0008)

SEP 2021

52.222-3* Convict Labor JUNE

52.222-19* Child Labor—Cooperation with Authorities and Remedies

DEC 2022

52.222-21* Prohibition of Segregated Facilities APR 2015

52.222-26* Equal Opportunity SEP 2016

52.222-36* Equal Opportunity for Workers with

Disabilities

JUN 2020

52.222-41* Service Contract Labor Standards AUG 2018

52.222-42* Statement of Equivalent Rates for Federal

Hires

MAY 2014

52.222-44* Fair Labor Standards Act and Service

Contract Labor Standards—Price Adjustment

MAY 2014

52.222-50* Combating Trafficking in Persons NOV 2021

52.222-55* Minimum Wages Under Executive Order

13658

JAN 2022

52.222-62* Paid Sick Leave Under Executive Order

13706

JAN 2022

52.223-18* Encouraging Contractor Policies to Ban Text

Messaging While Driving

JUN 2020

52.225-13* Restrictions on Certain Foreign Purchases FEB 2021

52.232-36* Payment by Third Party MAY 2014

52.232-40* Providing Accelerated Payments to Small

Business Subcontractors

MAR 2023

52.233-3* Protest after Award AUG 1996

52.233-4* Applicable Law for Breach of Contract Claim OCT 2004

CLAUSES INCORPORATED BY FULL TEXT

52.252-6 Authorized Deviations in Clauses (NOV 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any Defense Acquisition Regulation (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

End of Clauses/Provisions.

Contractor must complete all Representations and Certifications found in the provisions listed above within their profile in the System for Award Management (SAM) at http://www.sam.gov to be considered for this solicitation.

Quotation information may be submitted via email. Submit responses to: janet.nunez@navy.mil

Reference solicitation number: N0024423Q0284 on all documents and requests for information. Quotes must be received no later than 29 Pacific Standard Time.

http://www.sam.gov/