Combined Synopsis for Supplies-19MR6026Q0006.pdf

United States Department of State

General Services Section

Nouakchott, Mauritania

Public Notice

Classification Code: 4320 – PUMPS FOR LIFT STATIONS

NAICS Code: 333911 – Pump and Pumping Equipment Manufacturing

The US Embassy Nouakchott, Mauritania would like to purchase pumps for lift stations. The related Product description is provided as an attachment to this notice.

The U.S. Embassy in Nouakchott has a requirement to purchase pumps for lift stations.

Please note that this is a combined synopsis/solicitation for a commercial item, prepared in accordance with the format FAR 12.6, as supplemented with additional information included in this notice.

This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued.

The solicitation number is 19MR6026Q0006 and is issued as a Request for Quotation.

The solicitation/contract includes all applicable provisions and clauses in effect through

FAC 2005-55.

Offers are due by June 22, at 18:00.

Contract Clause, in addendum to FAR 52.212-1, Instructions to Offerors-Commercial

Items, applies to this acquisition. Award will be made to the lowest priced, technically acceptable offeror.

52.240-90 Security Prohibitions and Exclusions Representations and Certifications.

https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52#FAR_52_240_90

FAR clause 52.212-4, Contract Terms and Conditions-Commercial items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR 52.212-5, Contract Terms and Conditions to Implement Statutes or Executive Orders - Commercial Items

(https://www.acquisition.gov/far/current/html/52_212_213.html#wp1179527 – include in full text), will apply to the resultant contract: 52.203-10, Price or Fee Adjustment for Illegal or Improper Activity.

The following DOSAR provisions/clauses will also apply: 652.206-70, Competition Advocacy/Ombudsman;

652.214-71, Authorization to Perform; 652.225-70, Arab League Boycott of Israel; 652.225-71, Section 8(a) of the

Export Administration Act of 1979, as Amended; 652.242-70, Contracting Officer’s Representative; and, 652.243-

70, Notices. All offerors must include a completed copy of FAR 52.212-3, Offeror Representations and Certifications

- Commercial Items with their offer. Offers are due by September 23, at 18:00.

All responsible sources may submit an offer that shall be considered. If there are any questions regarding the requirements set in the solicitation, please contact Nouakchott Procurement at +222 45 25 26 60.

All contractors must be registered in the SAM (System for Award Management) Database https://www.sam.gov prior to contract award pursuant to FAR provision 52.204-

7. Therefore, prospective offerors are encouraged to register prior to the submittal of quotations/proposals.

The guidelines for registration in SAM are also available at:

https://www.statebuy.state.gov/pd/Pages/AdditionalVendorReg.aspx

Furthermore, with the recent FAR update, it is now a mandatory requirement for the Government to inquire if contractors are using or will be using, in government contracting, covered telecommunications equipment produced by Huawei, ZTE, Hikvision, Dahua, and Hytera, or their subsidiaries or affiliates. Consequently, vendors are required to update their SAM registration with that information. Potential offerors are advised to take special attention to clauses FAR 52.204-24, FAR 52.204-25 and FAR 52.204-26 while completing their registration in

SAM.

The preferable means of contact for this request for quotation is via electronic mail to the Contracting

Officer: NouakchottGSOSolicitations@state.gov .

You will need to check this website periodically for updates.

Thank you in advance for your interest in cooperation with the US Government.

https://www.acquisition.gov/far/current/html/52_212_213.html#wp1179527 https://www.sam.gov/ https://www.statebuy.state.gov/pd/Pages/AdditionalVendorReg.aspx mailto:NouakchottGSOSolicitations@state.gov%20.

Model #1

70 SERIES • MODELS 7012

Discharge size - 1¼" NPT

Seals - dual mechanical carbon/ceramic upper carbon/silicon carbide lower

Moisture detection system

Construction - Cast iron ASTM A-48 Class 30 30,000# tensile strength, protected with a corrosion resistant baked epoxy powder coating

Attaching hardware - 304 stainless steel

O-ring seals - Viton

Impeller - Bronze vortex design

High head model

• 2.5 KW 2800 RPM

• 3 Phase - 380 Volt

• Stator - Class F insulation and lead wires Nema

B design

• Thermal with leads

• Housing - Cast iron oil-filled

• Ball bearings - Upper and lower high carbon chromium steel

IMPELLER

TYPE:

BRONZE VORT X TANDEM SEALS: S ANDARD

CUTTER &

PLATE:

SS HARDENED TO 55-60

ROCKWELL

MOTOR DESIGN

LETTER:

NEMA B (3 Ph)

PUMP NET

WEIGHT:

132 bs. (60 Kg) POWER CORD LENGTH: ft (m)

(20' STANDARD)

25' 35' 50'

(7.6 m) (10.7 m) (15.2 m)

O-RINGS: VITON

MOTOR SHAFT: 416 SS POWER CORD: 14 AWG SOW / CE

PUMP - H07RN-

F4G1.5

RPM: 2800 STATOR & LEAD WIRES

INSULATION:

CLASS F

MOTOR TYPE: SUBMERSIBLE MAXIMUM STATOR

TEMPERATURE:

311°F (155°C)

SHAFT SEAL

CONSTRUCTION:

STAND

ARD

CARBON/CERAMIC UPPER

CARBON/SILICON CARBIDE LOWER

OPTIONAL CARBON /SILICON CARBIDE SILICON

MODELS: 7012

CONFIGURATION: HIGH HEAD

SERVICE FACTOR: 1.2

NEC LOCKED ROTOR

CODE:

G

MAXIMUM KW INPUT: 2.5

STANDARD IMPELLER

DIAMETER:

6.125"

DISCHARGE SIZE: 1.25" NPT

UPPER CARBIDE/SILICON CARBIDE

OPTIONAL

LOWER

SILICON CARBIDE/SILICON CARBIDE

STANDARD SENSING

DEVICES*

MOTOR THERMAL

SHUTOFF

MOISTURE

DETECTION

THERMAL CUT-OUT (3 PH)

MOISTURE SENSING PROBES

IMPELLER TRIM - REVERSING MODELS

ONLY:

OPTIONAL

DESIGN POINT: GPM @ '

TDH, IMPELLER DIA.

" DESIGN POINT:

LPM @ M, IMPELLER

DIA. mm

MAXIMUM WATER TEMPERATURE: 104°F (40°C)

MOD

EL

SER

VIC

E

FAC

TOR

380V /

3 PH

FL

A

LR

A

7011 1.2 4.4 18

7012 1.2 4.4 18

7013 1.2 4.4 18

Model #2

70 SERIES • MODELS 7012

440 stainless steel cutter and plate hardened to Rockwell C55-60

Discharge size - 1¼" NPT

Seals - dual mechanical carbon/ceramic upper carbon/silicon carbide lower

Moisture detection system

Construction - Cast iron ASTM A-48 Class 30 30,000# tensile strength, protected with a corrosion resistant baked epoxy powder coating

Attaching hardware - 304 stainless steel

O-ring seals - Viton

Impeller - Bronze vortex design

High head model

Motor

2.5 KW, 2800 RPM

220V/1ph/50hz

Stator - Class F insulation and lead wires Nema B design

Thermal with leads

Housing - Cast iron oil-filled

Ball bearings - Upper and lower high carbon chromium steel

Power and cable length - 20' (6.1 m). C.E. Compliant pump has 33' (10 m)

EATURES

1. 20' (6.1 m) power and sensor cable. C.E. Compliant pump has 33' (10 m)

2. Cast in support legs enabling the pump to be free standing.

3. Stainless steel lifting bail.

4. Stator - Class F insulation and lead wires Nema B design.

5. Thermal sensor protection. Oil-filled motor housing assures uniform heat distribution, lubricates bearings, and conducts heat for cooler running.

6. Upper and lower high carbon chromium steel ball bearings.

7. Finned motor housing and adapter for quicker heat dissipation.

8. "Star" type stainless steel cutter and plate hardened to Rockwell C55-60.

9. Stainless steel shaft and hardware resists corrosion.

10. Protective cutter ring helps to extend cutter life.

11. Heavy duty motor features ball bearing construction. Class F motor insulation is double dipped and baked. End connections and lead wires are Class F. At maximum load, winding temperature will not exceed 250°F (121°C) with motor housing not submerged.

12. Viton O-ring seals.

13. Heavy duty cord connections.

14. Class 30 cast iron housing protected with corrosion resistant baked on epoxy powder coating.

15. Tandem seals. Carbon/rotating, ceramic/stationary upper, carbon/silicon carbide lower, Buna-N elastomers.

16. Patented moisture detection system with upper and lower probes, protecting the motor from liquid entry.

17. Vortex impeller design made of cast bronze, fully balanced with integral pump out vane to clear debris.

18. 1¼" NPT vertical discharge.

19. Concentric pump housing with centerline discharge reduces radial loading for longer bearing and shaft seal life.

20.

MOD

EL

SER

VIC

E

FAC

380V /

3 PH

FL

A

LR

A

MODELS: 7012

CONFIGURATION: HIGH HEAD

SERVICE FACTOR: 1.2

NEC LOCKED ROTOR CODE: G

MAXIMUM KW INPUT: 2.5

STANDARD IMPELLER DIAMETER: 6.125"

DISCHARGE SIZE: 1.25" NPT

TO

R

7011 1.2 4.4 18

7012 1.2 4.4 18

7013 1.2 4.4 18

IMPELLER

TYPE:

BRONZE VORT X TANDEM SEALS: S ANDARD

CUTTER &

PLATE:

SS HARDENED TO 55-60

ROCKWELL

MOTOR DESIGN

LETTER:

NEMA B (3 Ph)

PUMP NET

WEIGHT:

132 bs. (60 Kg) POWER CORD LENGTH: ft (m)

(20' STANDARD)

25' 35' 50'

(7.6 m) (10.7 m) (15.2 m)

O-RINGS: VITON

MOTOR SHAFT: 416 SS POWER CORD: 14 AWG SOW / CE

PUMP - H07RN-

F4G1.5

RPM: 2800 STATOR & LEAD WIRES

INSULATION:

CLASS F

MOTOR TYPE: S BMERSIBLE MAXIMUM STATOR

TEMPERATURE:

311°F (155°C)

SHAFT SEAL

CONSTRUCTION:

STANDARD CARBON/CERAMIC UPPER

CARBON/SILICON CARBIDE LOWER

OPTIONAL UPPER CARBON /SILICON CARBIDE SILICON

CARBIDE/SILICON CARBIDE

OPTIONAL LOWER SILICON CARBIDE/SILICON CARBIDE

STANDARD SENSING

DEVICES*

MOTOR THERMAL

SHUTOFF

MOISTURE

DETECTION

INTEGRAL ON-LEAD (1 PH) OR THERMAL CUT-

OUT (3 PH)

MOISTURE SENSING PROBES

IMPELLER TRIM - REVERSING MODELS

ONLY:

OPTIONAL

DESIGN POINT: GPM @ '

TDH, IMPELLER DIA.

" DESIGN POINT:

LPM @ M, IMPELLER

DIA. mm

MAXIMUM WATER TEMPERATURE: 104°F (40°C)

Model #3

7110-XXXX AK7110 HFV 380V/3Ph/50Hz/2800/3.2KW/2" NPT

440 stainless steel cutter and plate hardened to Rockwell C55-60

Discharge size - 2½" (64 mm) flanged horizontal adaptable to 3" (76 mm) flange, 2" NPT optional.

Seals - dual mechanical carbon/rotary ceramic/stationary, Buna-N elastomers

Moisture detection system

Construction - Cast iron ASTM A-48 Class 30 30,000# tensile strength, protected with a corrosion resistant baked on epoxy powder coating.

Balanced concentric pump housing and impeller.

Attaching hardware - 304 stainless steel

O-ring seals - Buna-N.

Impeller - Bronze vortex design

High Flow

Motor:

Phase - 380 Volt 2800 RPM.

Stator - Class F insulation and lead wires.

Nema B design.

Thermal sensor with leads.

Housing - Cast iron oil-filled.

Ball bearings - Upper and lower high carbon

Power and sensor cable length - 25' (7.6 m).

MODEL NUMBER: 7110 7111 7112

SERVICE FACTOR: 1.2 1.2 1.2

NEC LOCKED ROTOR CODE: K L J

MAXIMUM KW INPUT: 3.2 4.3 5.3

IMPELLER DIAMETERS: in

(mm) STANDARD

REFER TO PUMP PERFORMANCE DATA

DISCHARGE SIZE: 2 1/2" (64 mm) Flanged, adaptable to 3" (76 mm)

High Head Design High Flow Design Reversible Design (3 Phase

Flange Models Only)

IMPELLER TYPE: Bronze Vortex TANDEM SEALS: S andard

FLANGE: ANSI B16. MOTOR DESIGN

LETTER:

NEMA B (3 Ph)

PUMP NET

WEIGHT: lbs. (kg)

245 bs. (111 kg) POWER CORD LENGTH:

ft (m) 25' (7.6 m) ' CE 33'

(10m)

MOTOR SHAFT: 416 SS POWER CORD: #12-4 SO* / CE pump

- H07RN-F4G4

RPM: 2800 STATOR & LEAD WIRES

INSULATION:

Class F

SHAFT SEAL

CONSTRUCTION:

STANDARD CARBON/CERAMIC - UPPER

CARBON/SILICON

CARBIDE - LOWER

OPTIONAL UPPER CARBON /SILICON CARBIDE SILICON

CARBIDE/SILICON CARBIDE

OPTIONAL LOWER CARBON /SILICON CARBIDE SILICON

CARBIDE/SILICON CARBIDE

STANDARD SENSING

DEVICES**

MOTOR THERMAL

SHUTOFF

MOISTURE

DETECTION

THERMAL SENSORS WITH AUTOMATIC RESET

MOISTURE SENSING PROBES

IMPELLER TRIM:

OPTIONAL

DESIGN POINT: LPM @ m TDH, IMPELLER DIA. mm

MAXIMUM WATER TEMPERATURE:

DESIGN POINT: GPM @ ' TDH,

IMPELLER DIA. "

104°F (40°C)

MOTOR TYPE: Submersible MAXIMUM STATOR

TEMPERATURE:

311°F (155°C)

**Units with FLA greater than 20 amps use a #8-4-gauge power cord. **Requires a circuit in control panel to function.

MODEL

KW

SERVICE

FACTOR

380V / 3 PHASE

FLA LRA

7110 3.2 1.2 6.2 41

7111 4.3 1.2 7.7 62

7112 5.3 1.2 9.5 62

Model#4

6282-0089 V6282 2F/220V/1Ph/50Hz/DS/No Plug

PUMP NAME PLATE POWER:

(kw)

1.0 KW

SOLID SIZE: mm (in) 51 mm (2")

MINIMUM HEAD: m (ft) 1.5 m (5')

MAXIMUM HEAD: m (ft) 7.0 m (23')

MAX.FLOW L/S (m3/hr) @ MIN.

HEAD m (ft)

8.0 L/S (28.7 m3/hr) @

1.5 m (4.9')

DISCHARGE SIZE: VERTICAL

FEMALE

2" NPT

PUMP NET WEIGHT:

kg (lbs)

40 kg (89 lbs) MOTOR TYPE: SUBMERSIBL

E

SERVICE FACTOR: 1.15 TYPE SOW* POWER CORD LENGTH:

m (ft)

8 m (25')

MOTOR DESIGN

LETTER:

NEMA B MOTOR SHAFT: 416 S.S.

IMPELLER TYPE: CAST IRON

VORTEX

STATOR INSULATION: CLASS B

O-RINGS AND

COVER GASKET:

VITON LEAD WIRES INSULATION: CLASS B

RPM: 1400 MAXIMUM STATOR TEMPERATURE: 130°C (266°F)

SHAFT SEAL

CONSTRUCTION:

STANDARD UPPER-CARBON/CERAMIC, LOWER-

SILICON CARBIDE/ CARBON

OPTIONAL UPPER

LOWER

SILICON CARBIDE / CARBON

SILICON CARBIDE / SILICON CARBIDE

SILICON CARBIDE / SILICON CARBIDE

MOTOR THERMAL SHUTOFF: STANDARD (Single

Phase Only)

THERMAL OVERLOAD WITH AUTOMATIC

RESET

MOISTURE DETECTION: OPTIONAL** MOISTURE SENSING PROBES

MINIMUM RECOMMENDED FLUID LEVEL: mm

(in)

2.54 mm (10")

MAXIMUM WATER TEMPERATURE: 54°C (130°F)

*CE rated models with H07RN power cord are available upon request.

**Requires a circuit in control panel to function.

Electrical DATA

Standard all models - 8 m

(25') cord

KW

220V/1PH 380V/3PH

FLA LRA FLA LRA

1.0 5.7 17 1.6 6

MODEL

Selection Guide

Volts PH Amps

V6282 220 1 5.7

AK6282 380 3 1.6

FEATURES

• Durable epoxy coated cast iron construction.

• Motor: 1.0 KW, 50 Hz, 1400 RPM, 1 Ph or 3 Ph, OIL/filled, hermetically sealed, automatic reset, thermal overload protected (1

Ph).

• Bearings: upper and lower ball bearings.

• Stainless steel motor shaft.

• Dual mechanical shaft seals - upper carbon/ceramic, lower silicon carbide/ carbon. Optional seal materials available.

• Viton O-ring seals and cover gasket.

• Impeller: non-clogging cast iron vortex design passes 51 mm (2") spherical solids.

• 8 m (25'), UL Listed, 3-wire neoprene cord and plug. Longer cords available in lengths of 11 m (35') or 15 m (50').

• CE models include an HD/FDN power cord.

• No screws to clog.

• Stainless steel screws, bolts and handle. 2’’ NTP discharge with 3" flange available.

• Corrosion-resistant powder coated epoxy finish.

• Moisture sensors available for early warning of seal failure (optional).

• 100% computerized tested