FINAL Bulleted Copy of ST Advanced Cold Weather Kit - rev 7AUG12
1 MB Posted
- Attached to
- Cold Weather Gear
- Solicitation number
- ColdWeatherGear-F2FT132215A001
About this file
Attachment 1-Clothing Specifications
Text of this file
Sheet1
| Special Tactics Multi-Cam Cold Weather Kit | ||||||
| PHOTO | ITEM | COLOR | QTY | DESCRIPTION | Layer | Weight |
| # 50008-60052 / Hard Shell Jacket | MultiCam | 365 | >Designed to be worn over body armor >Designed to keep the operator and their protective gear dry from heavy rain >Jacket shall be a minimum of 3 waterproof/breathable layers >Zippers shall be concealed and waterproof for the center front zipper, hand pockets, and bicep pockets, to ensure the core and kit safe and dry >Interior of the jacket shall be seam sealed to ensure the seams don't wet out, and are two mesh >Hood shall be fully adjustable and helmet-compatible, with a laminated brim to keep the elements out of the wearer's eyes >Wrist cuff shall feature a VelcroR wrist stay with half elastic to cinch around the wrist, blocking out the wind while remaining fully adjustable. >Hem features an adjustable shock cord >2" x 3" Velcro multicam patches on the outside upper area of both left and right sleeve for necessary badges to be displayed >Back hem shall be slightly dropped to cover the rear even when bending and moving | Layer 5 - Worn as outter most layer in extreme rain/cold. Compatable with lower layers | 25 oz - 35 oz | |
| # 50034-60034 / Hard Shell Pants | MultiCam | 365 | >3 waterproof/breathable layers, and must be seam sealed on the interior to ensure water repellency >The pants must have a zipper/button fly closure to keep these pants as comfortable and as familiar as possible >The waistband shall be adjustable with belt loops, Velcro® side tabs, and back elastic >Suspender loops are required to the inside of the waistband >Two cargo pockets are required for storage, and must use concealed waterproof zippers, with the slider moving from the front of the leg to the back >The side seam hems also require concealed waterproof zippers extending to the knee, to facilitate pulling the pants on over boots >The pants shall also feature articulated knees for enhanced mobility. >Grommets are required on the pant hems to give the wearer the option to strap the pants over the boots for added protection. | Layer 5 - Worn as outter most layer in extreme rain/cold. Compatable with lower layers | 17 oz - 27 oz | |
| # 50023-60023 / High Loft Jacket | MultiCam | 365 | >High Loft Jacket must be designed to be worn over body armor and must provide warmth, featuring 6 oz of synthetic insulation. >Shell shall be made of 70 denier textured nylon, with 330d Cordura® reinforced abrasion resistant panels on the elbows. >The two hand warmer pockets shall be lined with 2 oz quiltedsynthetic insulation >Two interior mesh pockets are required for storage and a place for wet goods to dry out. >The jacket shall feature and ajustable cord lock hem that blocks the wind, and adjuster clips are located in the hand warmer pockets >Hood shall be fully adjustable and compatible with currently fielded helmets, and must feature a laminated brim that keeps the head warm and protected. >Jacket shall feature a separate collar >The wrist cuffs must be adjustable with Velcro® wrist stays and half elastic, allowing the wearer to put a gloved hand in and out. >2" x 3" Velcro multicam patches on the outside upper area of both left and right sleeve for necessary badges to be displayed | Layer 4 - Worn as heavy cold weather layer. Compatable with lower and higher layers | 33 oz - 43 oz | |
| # 50043-60043 / High Loft Pants | MultiCam | 365 | > Pants must be designed to withstand even the coldest temperatures using 4 oz of synthetic insulation. >The shell shall be made of 70 denier textured nylon, which has no sheen and makes very little noise. >330d Cordura® must reinforce the rear, knees and instep. >Elasticized waistband and side seam zippers are required for flexibility. >Wide, flat belt loops, are required to keep your belt in place and less prone to snags. >Suspender loops on the interior of the waistband >The fly shall be zippered and with Velcro® closure >The knees must be articulated to aid in mobility. The instep and seat of the pants shall be reinforced with an extra layer of fabric for added protection from the elements. > Grommets shall be on the side seams and the insteps so that the wearer can strap the hems over boots. | Layer 4 - Worn as heavy cold weather layer. Compatable with lower and higher layers | 27 oz - 37 oz | |
| # 50021-60021 / Low Loft Jacket | MultiCam | 365 | >Low Loft Jacket shall have sleeves with abrasion resistant panels from the elbow to the cuff >Sleeves shall be extremely strong with plenty of stretch. >The body of the jacket shall be made of 70 denier textured nylon fabric >The jacket requires nylon rip stop lining that is quilted with 2 oz synthetic insulation, to be worn under kit if needed. >Hand warmer pockets must be sewn directly into the seam for a clean-finished look. >Bicep pockets are required to have 7” zippers for secure storage, and 2” x 3” of Velcro® patches are necessary in MultiCam® to display any necessary badges. >No shoulder seams >Dropped tail is required to cover the back > The back portion of the hem shall be elasticized to enhance fit and to prevent core-chilling wind from coming up through the hem >2" x 3" Velcro multicam patches on the outside upper area of both left and right sleeve for necessary badges to be displayed | Layer 3 - Worn as light cold weather layer. Compatable with lower and higher layers | 13 oz - 23 oz | |
| # 50005-60005 / Lightweight Soft Shell Jacket | MultiCam | 365 | >Provide second-skin protection and will be small enough to wear under body armor. > The jacket must possess extreme strength and abrasion resistance with plenty of stretch. >The jacket shall have excellent water repellency and wind resistance from a tight weave of nylon and spandex. >High collar that protects the neck from the elements, and a full zip front entry >The jacket shall possess inset sleeve pockets that stretch as the wearer moves. > The zippered hand pockets shall be made with mesh pocket bags >These pockets shall be finished on the interior, so the wearer can stuff whatever extra gear they’ve got into a safe place. >Stow-away hood, made of nylon rip stop, that is made as minimally and as articulated as possible, fitting the head snugly, allowing a helmet to be placed over it >The sleeves shall include 2” x 3” Velcro® in MultiCam® to display any necessary badges. >The jacket shall have a dropped tail to provide protection when crouching low. >2" x 3" Velcro multicam patches on the outside upper area of both left and right sleeve for necessary badges to be displayed | Layer 2 - Worn as light cold/rain jacket. Compatable with lower and higher layers | 13 oz - 23 oz | |
| # 50035-60035 / Lightweight Soft Shell Pants | MultiCam | 365 | >Pants shall be made of a unique plain weave offering extreme strength and abrasion resistance with plenty of stretch. >Pants shall have excellent water repellency and wind resistance and be made of a tight weave of nylon and spandex >The crotch shall have a gusset and articulated knees to enhance mobility without adding extra seams or bulk >The pants shall have five belt loops and will be designed with the fighter in mind, keeping the belt and all of its attached goods in place. >Two cargo pockets are required on the thighs >The angle on the thigh pockets must allow the stored goods forward, so they are always at hand level >Zippered hems are required to provide an easy method for getting pants on over boots. | Layer 2 - Worn as light cold/wind pants. Compatable with lower and higher layers | 15 oz - 25 oz | |
| #50152-50150 / Wind Shirt | MultiCam | 365 | >Wind shirt shall pack small and provide exceptional protection from wind and rain >The wind shirt collar must provide full neck protection >Half zip front openeing required >The shirt must possess a minimally constructed, articulated stow-away hood fits the head snugly, allowing a helmet to be worn over it >The fit of the shirt shall be generous enough to pull over a mid layer, but fitted enough to keep the wind out >Elasticized sleeve cuffs required, an adjustable hem, and an angled chest pocket >2" x 3" Velcro multicam patches on the outside upper area of both left and right sleeve for necessary badges to be displayed | Layer 1 - Lightest layer worn as rain/wind jacket. Compatable with higher layers | 5 oz - 15 oz | |
| #50033-60033 / Wind Pants | MultiCam | 365 | >Wind pants shall be breathable >Must pack small to protect the operator on the go and provide exceptional protection from wind and rain >Pants must have an elasticized adjustable waistband >18" side zippers, to facilitate dressing quickly over boots >The pants must include two hand pockets and one back pocket | Layer 1 - Lightest layer worn as rain/wind pants. Compatable with higher layers | 3 oz - 13 oz |
Sheet2
| Special Tactics Multi-Cam Cold Weather Kit | ||||||
| PHOTO | ITEM | COLOR | QTY | DESCRIPTION | Layer | Weight |
| Hard Shell Jacket | MultiCam | 1 | must be able to wear over body armor | |||
| must keep operator and their protective gear gry from heavy rain | ||||||
| jacket shall be a minimum of 3 waterproof/breathable layers | ||||||
| zippers shall be concealed and waterproof for the center front zipper, hand pockets, and bicep pockets, to ensure the core and kit safe and dry | ||||||
| interior of the jacket shall be seam sealed to ensure the seams don't wet out, and are two mesh | ||||||
| hood shall be fully adjustable and helmet-compatible, with a laminated brim to keep the elements out of the | ||||||
| wearer's eyes | ||||||
| wrist cuff shall feature a VelcroR wrist stay with half elastic to cinch around the wrist, blocking out the wind while remaining fully adjustable | ||||||
| hem must have an adjystable shock cord | ||||||
| 2" x 3" VelcroR patches on the sleeves in MultiCamR necessary badges can be displayed | ||||||
| Patch Locations - upper arm where enlisted rank is placed on the USAF Air Battle Uniform | ||||||
| back hem shall be slightly dropped to cover the rear even when bending and moving |
image5.png image6.png image7.png image8.png image9.png image1.png image2.png image3.png image4.png
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
File details come from the government source that posted it. Updated .