CLSExport FA462526Q1060.pdf
PDF 92 KB Posted
- Attached to
- Drone Jammer
- Solicitation number
- FA462526Q1060
About this file
This document is a clauses incorporation list and full text of contract clauses for Air Force solicitation FA462526Q1060. The document does not contain information regarding specific products or services required, response dates, award dates, pricing terms, or set-asides. Instead, it serves as a comprehensive compilation of Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses that are incorporated into the contract by reference and in full text.
The clauses address compliance requirements across multiple functional areas including cybersecurity (CMMC certification levels 1-3), safeguarding of defense information, buy American provisions, labor standards, small business protections, payment processing through Wide Area WorkFlow (WAWF), equal opportunity requirements, and prohibitions on trafficking in persons and covered defense telecommunications equipment. Key compliance requirements include mandatory CMMC certification status maintenance for contractor information systems processing Federal contract information or controlled unclassified information, electronic payment submission via WAWF, and various security and ethical business conduct standards. The document includes provisions for limitations on subcontracting, small business program participation, and vendor responsibility determinations, with numerous alternates and deviations specific to this Air Force procurement vehicle.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Drone Jammer_Synopsis Solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DOCUMENT NUMBER
FA462526Q1060
CLAUSES INCORPORATED BY REFERENCE
CLAUSE
NO
ALT NO/
DEV NO
CLAUSE TITLE YEAR-
MO
SECTION
252.203-7000 Requirements Relating to Compensation of Former DoD Officials.
2011-09 SEC I
252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 2022-12 SEC I
252.203-7005 Representation Relating to Compensation of Former DoD Officials.
2022-09 SEC K
252.204-7008 Compliance with Safeguarding Covered Defense Information Controls.
2016-10 SEC K
252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.
2024-05 SEC I
252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.
2023-01 SEC I
252.204-7024 Notice on the Use of the Supplier Performance Risk System. 2023-03 SEC L 252.223-7008 Prohibition of Hexavalent Chromium. 2023-01 SEC I 252.225-7001 Buy American and Balance of Payments Program. 2024-02 SEC I 252.225-7002 Qualifying Country Sources as Subcontractors. 2022-03 SEC I
252.225-7055 Representation Regarding Business Operations with the Maduro Regime.
2022-05 SEC K
252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime.
2023-01 SEC I
252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region-Representation.
2023-06 SEC K
252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.
2023-06 SEC I
252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.
2018-12 SEC G
252.232-7010 Levies on Contract Payments. 2006-12 SEC I
252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel.
2023-01 SEC I
252.246-7008 Sources of Electronic Parts. 2023-01 SEC I 252.247-7023 Transportation of Supplies by Sea. 2024-10 SEC I
52.203-18 Prohibition on Contracting with Entities that Require Certain
Internal Confidentiality Agreements or Statements- Representation.
2017-01 SEC L
52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.
2017-01 SEC I
52.204-13 System for Award Management-Maintenance. (Deviation) 2026-02 SEC I 52.204-7 System for Award Management-Registration. (Deviation) 2026-02 SEC L
52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation)
2026-02 SEC I
52.212-1 Instructions to Offerors-Commercial Products and Commercial Services. (Deviation)
2026-02 SEC L
52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation)
2026-02 SEC I
52.219-6 Notice of Total Small Business Set-Aside. (Deviation) 2026-02 SEC I
52.222-19 Child Labor-Cooperation with Authorities and Remedies.
(Deviation)
2026-02 SEC I
52.222-3 Convict Labor. (Deviation) 2026-02 SEC I 52.222-41 Service Contract Labor Standards. (Deviation) 2026-02 SEC I 52.222-50 Combating Trafficking in Persons. (Deviation) 2026-02 SEC I
52.222-62 Paid Sick Leave Under Executive Order 13706. (Deviation) 2026-02 SEC I 52.223-23 Sustainable Products. (Deviation) 2026-02 SEC I
52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving.
2024-05 SEC I
52.232-33 Payment by Electronic Funds Transfer-System for Award Management.
2018-10 SEC I
52.232-40 Providing Accelerated Payments to Small Business Subcontractors.
2023-03 SEC I
52.233-3 Protest after Award. (Deviation) 2026-02 SEC I 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation) 2026-02 SEC I
52.240-90 Security Prohibitions and Exclusions Representations and Certifications. (Deviation)
2026-02 SEC K
52.240-91 Security Prohibitions and Exclusions. (Deviation) 2026-02 SEC I
52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation)
2026-02 SEC I
52.240-93 Basic Safeguarding of Covered Contractor Information Systems. (Deviation)
2026-02 SEC I
52.240-92 Security Requirements. (Deviation) 2026-02 SEC I 52.203-6 Restrictions on Subcontractor Sales to the Government. 2020-06 SEC I 52.203-13 Contractor Code of Business Ethics and Conduct. 2021-11 SEC I 52.203-17 Contractor Employee Whistleblower Rights. 2023-11 SEC I
52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. (Deviation)
2026-02 SEC I
52.204-14 Service Contract Reporting Requirements. (Deviation) 2026-02 SEC I
52.204-15 Service Contract Reporting Requirements for Indefinite- Delivery Contracts. (Deviation)
2026-02 SEC I
52.209-6 Protecting the Government's Interest When Subcontracting
With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation)
2026-02 SEC I
52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters. (Deviation)
2026-02 SEC I
52.219-3 Notice of HUBZone Set-Aside or Sole-Source Award.
(Deviation)
2026-02 SEC I
52.219-6 ALT I Notice of Total Small Business Set-Aside. (Alternate I) 2020-03 SEC I 52.219-9 ALT IV Small Business Subcontracting Plan. (Deviation) (Alternate IV) 2026-02 SEC I 52.219-16 Liquidated Damages-Subcontracting Plan. (Deviation) 2026-02 SEC I
52.219-27 Notice of Set-Aside for, or Sole-Source Award to, Service-
Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program. (Deviation)
2026-02 SEC I
52.222-37 Employment Reports on Veterans. (Deviation) 2026-02 SEC I
52.222-40 Notification of Employee Rights Under the National Labor Relations Act. (Deviation)
2026-02 SEC I
52.222-54 Employment Eligibility Verification. (Deviation) 2026-02 SEC I 52.224-3 ALT I Privacy Training. (Alternate I) 2017-01 SEC I
52.225-3 ALT III Buy American-Free Trade Agreements-Israeli Trade Act.
(Deviation) (Alternate III)
2026-02 SEC I
52.232-29 Terms for Financing of Purchases of Commercial Products and Commercial Services.
2021-11 SEC I
52.232-30 Installment Payments for Commercial Products and Commercial Services.
2021-11 SEC I
52.242-5 Payments to Small Business Subcontractors. 2017-01 SEC I
52.222-43 Fair Labor Standards Act and Service Contract Labor
Standards-Price Adjustment (Multiple Year and Option Contracts). (Deviation)
2026-02 SEC I
52.222-44 Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment. (Deviation)
2026-02 SEC I
52.222-53 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements.
(Deviation)
2026-02 SEC I
Minimum Wages for Contractor Workers Under Executive
52.222-55 Order 14026. (Deviation) 2026-02 SEC I 52.219-8 Utilization of Small Business Concerns. (Deviation) 2026-02 SEC I 52.222-35 Equal Opportunity for Veterans. (Deviation) 2026-02 SEC I 52.232-18 Availability of Funds. 1984-04 SEC I 52.225-5 Trade Agreements. 2023-11 SEC I
52.222-51 Exemption from Application of the Service Contract Labor
Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements. (Deviation)
2026-02 SEC I
CLAUSES IN FULL TEXT
CLAUSE
NO
CLAUSE TITLE ALT NO/
DEV NO
YEAR-
MO
CLAUSE TEXT
252.204-7017 Prohibition on the Acquisition of Covered Defense
Telecommunications Equipment or Services-Representation.
2021-05
PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS
EQUIPMENT OR SERVICES-REPRESENTATION (MAY 2021)
The Offeror is not required to complete the representation in this provision if the Offeror has represented in the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument."
(a) . "Covered defense telecommunications equipment or services," "covered mission," Definitions "critical technology," and "substantial or essential component," as used in this provision, have the meanings given in the 252.204-7018 clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation.
(b) . Section 1656 of the National Defense Authorization Act for Fiscal Year 2018 Prohibition (Pub. L. 115-91) prohibits agencies from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.
(c) . The Offeror shall review the list of excluded parties in the System for Award Procedures Management (SAM) at for entities that are excluded when providing any https://www.sam.gov equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted.
(d) . If in its annual representations and certifications in SAM the Offeror has Representation represented in paragraph (c) of the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does" provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offeror shall complete the following additional representation:
The Offeror represents that it will will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation.
(e) . If the Offeror has represented in paragraph (d) of this provision that it "will Disclosures provide covered defense telecommunications equipment or services," the Offeror shall provide the following information as part of the offer:
(1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable).
(2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision.
(3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known).
(4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).
(End of provision)
252.204-7021 Contractor Compliance with the Cybersecurity Maturity Model
Certification Level Requirements.
2025-11
CONTRACTOR COMPLIANCE WITH THE CYBERSECURITY MATURITY MODEL
CERTIFICATION LEVEL REQUIREMENTS (NOV 2025)
(a) . As used in this clause- Definitions
"Controlled unclassified information" means information the Government creates or possesses, or information an entity creates or possesses for or on behalf of the Government, that a law, regulation, or Governmentwide policy requires or permits an agency to handle using safeguarding or dissemination controls (32 CFR 2002.4(h)).
"Current" means-
(1) With regard to Conditional Cybersecurity Maturity Model Certification (CMMC) Status-
(i) Not older than 180 days for Conditional Level 2 (Self) assessments and Conditional Level 2 (certified third-party assessment organization (C3PAO)) assessments, with-
(A) No changes in compliance with the requirements at 32 CFR part 170 since the Conditional CMMC Status date (see 32 CFR 170.16 and 170.17); and
(B) A corresponding affirmation of continuous compliance by an affirming official (see 32 CFR 170.4); and
(ii) Not older than 180 days for Conditional Level 3 (Defense Industrial Base Cybersecurity Assessment Center (DIBCAC)) assessments, with-
(A) No changes in compliance with the requirements at 32 CFR part 170 since the Conditional CMMC Status date (see 32 CFR 170.18); and
(B) A corresponding affirmation of continuous compliance by an affirming official;
(2) With regard to Final CMMC Status-
(i) Not older than 1 year for Final Level 1 (Self), with-
(A) No changes in compliance with the requirements at 32 CFR part 170 since the Final CMMC Status date (see 32 CFR 170.15); and
(B) A corresponding affirmation of continuous compliance, not older than 1 year, by an affirming official;
(ii) Not older than 3 years for Final Level 2 (Self) assessments and Final Level 2 (C3PAO) assessments, with-
(A) No changes in compliance with the requirements at 32 CFR part 170 since the Final CMMC Status date (see 32 CFR 170.16 and 170.17); and
(B) A corresponding affirmation of continuous compliance, not older than 1 year, by an affirming official; and
(iii) Not older than 3 years for Final Level 3 (DIBCAC) assessments, with-
(A) No changes in compliance with the requirements at 32 CFR part 170 since the Final CMMC Status date (see 32 CFR 170.18); and
(B) A corresponding affirmation of continuous compliance, not older than 1 year, by an affirming official; and
(3) With regard to affirmation of continuous compliance (32 CFR 170.22), not older than 1 year with no changes in compliance with the requirements at 32 CFR part 170.
"Cybersecurity Maturity Model Certification (CMMC) status" means the result of meeting or exceeding the minimum required score for the corresponding assessment. The potential statuses are as follows:
(1) Final Level 1 (Self).
(2) Conditional Level 2 (Self).
(3) Final Level 2 (Self).
(4) Conditional Level 2 (C3PAO).
(5) Final Level 2 (C3PAO).
(6) Conditional Level 3 (DIBCAC).
(7) Final Level 3 (DIBCAC).
"Cybersecurity Maturity Model Certification unique identifier (CMMC UID)" means 10 alpha-numeric characters assigned to each CMMC assessment and reflected in the Supplier Performance Risk System (SPRS) for each contractor information system.
"Federal contract information (FCI)" means information, not intended for public release, that is provided by or generated for the Government under a contract to develop or deliver a product or service to the Government. It does not include information provided by the Government to the public, such as on public websites, or simple transactional information, such as information necessary to process payments.
"Plan of action and milestones" means a document that identifies tasks to be accomplished. It details resources required to accomplish the elements of the plan, any milestones in meeting the tasks, and scheduled completion dates for the milestones, as defined in National Institute of Standards and Technology Special Publication 800-115 (32 CFR 170.21).
(b) . The Cybersecurity Maturity Model Certification (CMMC) is a framework for Framework assessing a contractor's compliance with applicable information security protections (see 32 CFR part 170).
(c) . The CMMC assessments will not duplicate efforts from any other comparable Duplication DoD assessment, except for rare circumstances when a reassessment may be necessary, for example, when there are indications of issues with cybersecurity and/or compliance with CMMC requirements.
(d) . The Contractor shall- Requirements
(1)(i) Have and maintain for the duration of the contract a current CMMC status at the following CMMC level, or higher: ____ Contracting Officer insert: CMMC Level 1 (Self); CMMC Level for all information systems used in 2 (Self); CMMC Level 2 (C3PAO); or CMMC Level 3 (DIBCAC) performance of the contract, task order, or delivery order that process, store, or transmit FCI or CUI; and
(ii) Consult 32 CFR 170.23 related to the flowdown of the CMMC requirements, and flow down the correct CMMC level to subcontracts and other contractual instruments;
(2) Only process, store, or transmit FCI or CUI on contractor information systems that have a CMMC status at the CMMC level required in paragraph (d)(1) of this clause, or higher;
(3) Complete on an annual basis, and maintain as current, an affirmation, by the affirming official (see 32 CFR 170.4), of continuous compliance with the requirements associated with the CMMC level required in paragraph (d)(1) of this clause in the Supplier Performance Risk System (SPRS) (
) for each CMMC UID applicable to each of the contractor information systems that https://piee.eb.mil process, store, or transmit FCI or CUI and that are used in performance of the contract;
(4) Ensure all subcontractors and suppliers complete prior to subcontract award, and maintain on an annual basis, an affirmation, by the affirming official (see 32 CFR 170.4), of continuous compliance with the requirements associated with the CMMC level required for the subcontract or other contractual instrument for each of the subcontractor information systems that process, store, or transmit FCI or CUI and that are used in performance of the subcontract; and
(5) If the Contractor has a CMMC Status of Conditional, successfully close out a valid plan of action and milestones (32 CFR 170.21) to achieve a CMMC Status of Final.
(e) . The Contractor shall- Reporting
(1) Submit to the Contracting Officer-
(i) The CMMC UID(s) issued by SPRS for contractor information systems that will process, store, or transmit FCI or CUI during performance of the contract; and
(ii) Any changes in the CMMC UIDs generated in SPRS throughout the life of the contract, task order, or delivery order, if applicable;
(2) Enter into SPRS the results of a current self-assessment for each CMMC UID, not covered by a C3PAO assessment or DIBCAC assessment, applicable to each of the contractor information systems that process, store, or transmit FCI or CUI and that are used in performance of the contract; and
(3) Complete in SPRS on an annual basis and maintain as current an affirmation of continuous compliance by the affirming official (see 32 CFR 170.4) for each self-assessment, C3PAO assessment, or DIBCAC assessment required under the contract in SPRS.
(f) . The Contractor shall- Subcontracts
(1) Insert the substance of this clause, including this paragraph (f) and excluding paragraph (e)(1), in subcontracts and other contractual instruments, including those for the acquisition of commercial products or commercial services, excluding commercially available off-the-shelf items, if the subcontract or other contractual instrument will contain a requirement to process, store, or transmit FCI or CUI; and
(2) Prior to awarding a subcontract or other contractual instrument, ensure that the subcontractor has a current CMMC certificate or current CMMC status at the CMMC level that is appropriate for the information that is being flowed down to the subcontractor based on the requirements at 32 CFR 170.23.
(End of clause)
252.204-7025 Notice of Cybersecurity Maturity Model Certification Level
Requirements.
2025-11
NOTICE OF CYBERSECURITY MATURITY MODEL CERTIFICATION LEVEL
REQUIREMENTS (NOV 2025)
(a) . As used in this provision, "controlled unclassified information (CUI)," "current," Definitions "Cybersecurity Maturity Model Certification (CMMC) status," "Cybersecurity Maturity Model Certification unique identifier (CMMC UID)," "Federal contract information (FCI)", and "plan of action and milestones" have the meaning given in the Defense Federal Acquisition Regulation Supplement 252.204-7021, Contractor Compliance With the Cybersecurity Maturity Model Certification Level Requirements, clause of this solicitation.
(b)(1) . The CMMC level required by Cybersecurity Maturity Model Certification (CMMC) level this solicitation is: ____ [Contracting Officer insert: CMMC Level 1 (Self); CMMC Level 2 (Self);
. This CMMC level, or higher (see 32 CFR part CMMC Level 2 (C3PAO); or CMMC Level 3 (DIBCAC)] 170), is required prior to award for each contractor information system that will process, store, or transmit Federal contract information (FCI) or controlled unclassified information (CUI) during performance of the contract.
(2) The Offeror will not be eligible for award of a contract, task order, or delivery order resulting from this solicitation if the Offeror does not have, for each of the contractor information systems that will process, store, or transmit FCI or CUI and that will be used in performance of a contract resulting from this solicitation-
(i) The current CMMC status entered in the Supplier Performance Risk System (SPRS) ( ) at the CMMC level required by paragraph (b)(1) of this provision; andhttps://piee.eb.mil
(ii) A current affirmation of continuous compliance with the security requirements identified at 32 CFR part 170 in SPRS.
(c) . If the Offeror has a CMMC Status of Conditional, the Offeror Plan of action and milestones shall successfully close out a valid plan of action and milestones (32 CFR 170.21) to achieve a CMMC Status of Final.
(d) . The Offeror shall provide, in the proposal, the CMMC unique CMMC unique identifiers identifier(s) (CMMC UIDs) issued by SPRS for each contractor information system that will process, store, or transmit FCI or CUI during performance of a contract, task order, or delivery order resulting from this solicitation. The Offeror also shall update the list when new CMMC UIDs are generated in SPRS. The CMMC UIDs are provided in SPRS after the Offeror enters the results of self-assessment(s) for each such information system.
(End of provision)
252.232-7006 Wide Area WorkFlow Payment Instructions. 2023-01
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)
(a) As used in this clause- Definitions.
"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.
"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.
"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) The WAWF system provides the method to electronically process Electronic invoicing.
vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) To access WAWF, the Contractor shall- WAWF access.
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.
(d) The Contractor should follow the training instructions of the WAWF Web- WAWF training.
Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/
(e) Document submissions may be via web entry, WAWF methods of document submission.
Electronic Data Interchange, or File Transfer Protocol.
(f) The Contractor shall use the following information when WAWF payment instructions.
submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:
(1) The Contractor shall submit payment requests using the following Document type.
document type(s):
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items-
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]
(3) The Contractor shall use the information in the Routing Data Table Document routing.
below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.
Routing Data Table*
Field Name in WAWF Data to be entered in WAWF
Pay Official DoDAAC F87700
Issue By DoDAAC FA4625
Admin DoDAAC FA4625
Inspect By DoDAAC ____
Ship To Code ____
Ship From Code ____
Mark For Code ____
Service Approver (DoDAAC) F4E32Q
Service Acceptor (DoDAAC) F4E32Q
Accept at Other DoDAAC ____
LPO DoDAAC ____
DCAA Auditor DoDAAC ____
Other DoDAAC(s) ____
(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")
(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)
(4) The Contractor shall ensure a payment request includes documentation Payment request.
appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) The Contractor shall ensure a receiving report meets the requirements Receiving report.
of DFARS Appendix F.
(g) WAWF point of contact.
(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
(Contracting Officer: Insert applicable information or "Not applicable.")
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
(End of clause)
52.222-42 Statement of Equivalent Rates for Federal Hires. 2014-05
Statement of Equivalent Rates for Federal Hires (MAY 2014)
In compliance with the Service Contract Labor Standards statute and the regulations of the Secretary of Labor ( ), this clause identifies the classes of service employees expected to be 29 CFR Part 4 employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C.5341 or 5 332.
This Statement is for Information Only: It is not a Wage Determination
Employee Class Monetary Wage-Fringe Benefits
(End of clause)
52.240-91 Security Prohibitions and Exclusions. (Deviation) (Alternate I) ALT I 2026-02
Alternate I (FEB 2026) (DEVIATION). As prescribed in 40.205(b), substitute the following paragraph (e)(1) for paragraph (e)(1) of the basic clause:
(e) .Governmentwide exclusion and removal orders
(1) Contractors are prohibited from providing or using as part of the performance of the contract any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by any applicable FASCSA orders identified by the checkbox(es) in this paragraph (e)(1). [Contracting Officer must select either "yes" or "no" for each of the following types of
:]FASCSA orders
Yes
No
DHS FASCSA Order
Yes
No
DoD FASCSA Order
Yes
No
DNI FASCSA Order
52.219-14 Limitations on Subcontracting. (Deviation) 2026-02
Limitations on Subcontracting (Feb 2026) (Deviation)
(a) This clause does not apply to the unrestricted portion of a partial set-aside.
(b) , as used in this clause, means a first-tier subcontractor, Definition. Similarly situated entity including an independent contractor, that-
(1) Has the same small business program status as that which qualified the prime contractor for the award ( , for a small business set-aside contract, any small business concern, without regard to its e.g.
socioeconomic status); and
(2) Is considered small for the size standard under the North American Industry Classification System (NAICS) code the prime contractor assigned to the subcontract.
(c) This clause applies only to-Applicability.
(1) Contracts that have been set aside for any of the small business concerns identified in 19.000(a)(3);
(2) Part or parts of a multiple-award contract that have been set aside for any of the small business concerns identified in 19.000(a)(3);
(3) Contracts that have been awarded on a sole-source basis in accordance with sections 19.105, 19.106, 19.107, and 19.108;
(4) Orders expected to exceed the simplified acquisition threshold and that are set aside for small business concerns under multiple-award contracts, as described in 8.4 and 16.5;
(5) Orders, regardless of dollar value, that are set aside in accordance with sections 19.105, 19.106, 19.107, and 19.108 under multiple-award contracts, as described in 8.4 and 16.5; and
(6) Contracts using the HUBZone price evaluation preference to award to a HUBZone small business concern unless the concern waived the evaluation preference.
(d) An independent contractor shall be considered a subcontractor.Independent contractors.
(e) By submission of an offer and execution of a contract, the Contractor agrees that in performance of a contract assigned a North American Industry Classification System (NAICS) code for-
(1) Services (except construction), it will not pay more than 50 percent of the amount paid by the Government for contract performance to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract;
(2) Supplies (other than procurement from a nonmanufacturer of such supplies), it will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both supplies and services, the 50 percent limitation shall apply only to the supply portion of the contract;
(3) General construction, it will not pay more than 85 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 85 percent subcontract amount that cannot be exceeded; or
(4) Construction by special trade contractors, it will not pay more than 75 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 75 percent subcontract amount that cannot be exceeded.
(f) The Contractor shall comply with the limitations on subcontracting as follows:
(1) For contracts, in accordance with paragraphs (c)(1), (2), (3) and (6) of this clause-
[ ] Contracting Officer check as appropriate.
By the end of the base term of the contract and then by the end of each subsequent option period; or
By the end of the performance period for each order issued under the contract.
(2) For orders, in accordance with paragraphs (c)(4) and (5) of this clause, by the end of the performance period for the order.
(g) A joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (e) of this clause will be performed by the aggregate of the joint venture participants.
(1) In a joint venture comprised of a small business protégé and its mentor approved by the Small Business Administration, the small business protégé shall perform at least 40 percent of the work performed by the joint venture. Work performed by the small business protégé in the joint venture must be more than administrative functions.
(2) In an 8(a) joint venture, the 8(a) participant(s) shall perform at least 40 percent of the work performed by the joint venture. Work performed by the 8(a) participants in the joint venture must be more than administrative functions.
(End of clause)
52.219-28 Postaward Small Business Program Rerepresentation.
(Deviation) (Alternate I)
ALT I 2026-02
Alternate I . As prescribed in , substitute the following (FEB 2026) (DEVIATION) 19.101(a)(2)(iii)(B) paragraph (g)(1) for paragraph (g)(1) of the basic clause:
(g)(1) The Contractor represents its small business size status for each one of the NAICS codes assigned to this contract.
NAICS Code Small business concern (yes/no)
[ ]Contracting Officer to insert NAICS codes.
52.222-35 Equal Opportunity for Veterans. (Alternate I) ALT I 2014-07
Alternate I . As prescribed in (a)(2), add the following as a preamble to the clause:(JUL 2014) 22.1310
Notice: The following term(s) of this clause are waived for this contract: [List term(s)].____________
52.222-50 Combating Trafficking in Persons. (Deviation) (Alternate I) ALT I 2026-02
Alternate I (FEB 2026) (DEVIATION). As prescribed in , substitute the following 22.1703-2(a)(2) paragraph in place of paragraph (c)(1)(i) of the basic clause:
(c)(1)(i)(A) The United States Government's policy prohibiting trafficking in persons described in paragraph (b) of this clause; and
(B) The following directive(s) or notice(s) applicable to employees performing work at the contract place(s) of performance as indicated below:
Document Title Document may be obtained from: Applies to performance in/at:
[Contracting Officer must insert title of directive/notice; indicate the document is attached or provide source (such as website link) for obtaining document; and, indicate the contract performance location
]outside the United States to which the document applies.
52.225-1 Buy American-Supplies (Alternate I) ALT I 2022-10
Alternate I . As prescribed in (a)(1)(ii) substitute the following sentence for the (OCT 2022) 25.1101 first sentence of paragraph (1)(ii)(A) of the definition of "domestic end product" in paragraph (a):
(A) The cost of its components mined, produced, or manufactured in the United States exceeds __ percent of the cost of all its components. [ ]____ Contracting officer to insert the percentage.
52.232-34 Payment by Electronic Funds Transfer-Other than System for
Award Management.
2013-07
Payment by Electronic Funds Transfer-Other than System for Award Management (JUL 2013) Method of payment.(a)
All payments by the Government under this contract shall be made by electronic funds transfer (1) (EFT) except as provided in paragraph (a)(2) of this clause. As used in this clause, the term "EFT" refers to the funds transfer and may also include the payment information transfer.
In the event the Government is unable to release one or more payments by EFT, the Contractor (2) agrees to either-
Accept payment by check or some other mutually agreeable method of payment; or(i)
Request the Government to extend payment due dates until such time as the Government makes (ii) payment by EFT (but see paragraph (d) of this clause).
Mandatory submission of Contractor's EFT information.(b)
The Contractor is required to provide the Government with the information required to make (1) payment by EFT (see paragraph (j) of this clause). The Contractor shall provide this information directly to the office designated in this contract to receive that information (hereafter: "designated office") by
[the Contracting Officer shall insert date, days after award, days before first request, the ____________ date specified for receipt of offers if the provision at 52.232-38 is utilized, or "concurrent with first request" as prescribed by the head of the agency; if not prescribed, insert "no later than 15 days prior to submission of the first request for payment"]. If not otherwise specified in this contract, the payment office is the designated office for receipt of the Contractor's EFT information. If more than one designated office is named for the contract, the Contractor shall provide a separate notice to each office.
In the event that the EFT information changes, the Contractor shall be responsible for providing the updated information to the designated office(s).
If the Contractor provides EFT information applicable to multiple contracts, the Contractor shall (2) specifically state the applicability of this EFT information in terms acceptable to the designated office.
However, EFT information supplied to a designated office shall be applicable only to contracts that identify that designated office as the office to receive EFT information for that contract.
. The Government may make payment by EFT through either the (c) Mechanisms for EFT payment Automated Clearing House (ACH) network, subject to the rules of the National Automated Clearing House Association, or the Fedwire Transfer System. The rules governing Federal payments through the ACH are contained in .31 CFR Part 210
Suspension of payment.(d)
The Government is not required to make any payment under this contract until after receipt, by the (1) designated office, of the correct EFT payment information from the Contractor. Until receipt of the correct EFT information, any invoice or contract financing request shall be deemed not to be a proper invoice for the purpose of prompt payment under this contract. The prompt payment terms of the contract regarding notice of an improper invoice and delays in accrual of interest penalties apply.
If the EFT information changes after submission of correct EFT information, the Government (2) shall begin using the changed EFT information no later than 30 days after its receipt by the designated office to the extent payment is made by EFT. However, the Contractor may request that no further payments be made until the updated EFT information is implemented by the payment office. If such suspension would result in a late payment under the prompt payment terms of this contract, the Contractor's request for suspension shall extend the due date for payment by the number of days of the suspension.
Liability for uncompleted or erroneous transfers.(e)
If an uncompleted or erroneous transfer occurs because the Government used the Contractor's EFT (1) information incorrectly, the Government remains responsible for-
Making a correct payment;(i)
Paying any prompt payment penalty due; and(ii)
Recovering any erroneously directed funds.(iii)
If an uncompleted or erroneous transfer occurs because the Contractor's EFT information was (2) incorrect, or was revised within 30 days of Government release of the EFT payment transaction instruction to the Federal Reserve System, and-
If the funds are no longer under the control of the payment office, the Government is deemed to (i) have made payment and the Contractor is responsible for recovery of any erroneously directed funds; or
If the funds remain under the control of the payment office, the Government shall not make (ii) payment and the provisions of paragraph (d) shall apply.
. A payment shall be deemed to have been made in a timely manner in (f) EFT and prompt payment accordance with the prompt payment terms of this contract if, in the EFT payment transaction instruction released to the Federal Reserve System, the date specified for settlement of the payment is on or before the prompt payment due date, provided the specified payment date is a valid date under the rules of the Federal Reserve System.
. If the Contractor assigns the proceeds of this contract as provided (g) EFT and assignment of claims for in the assignment of claims terms of this contract, the Contractor shall require as a condition of any such assignment, that the assignee shall provide the EFT information required by paragraph (j) of this clause to the designated office, and shall be paid by EFT in accordance with the terms of this clause. In all respects, the requirements of this clause shall apply to the assignee as if it were the Contractor. EFT information that shows the ultimate recipient of the transfer to be other than the Contractor, in the absence of a proper assignment of claims acceptable to the Government, is incorrect EFT information within the meaning of paragraph (d) of this clause.
. The Government is not liable for (h) Liability for change of EFT information by financial agent errors resulting from changes to EFT information provided by the Contractor's financial agent.
. The payment or disbursing office shall forward to the Contractor available (i) Payment information payment information that is suitable for transmission as of the date of release of the EFT instruction to the Federal Reserve System. The Government may request the Contractor to designate a desired format and method(s) for delivery of payment information from a list of formats and methods the payment office is capable of executing. However, the Government does not guarantee that any particular format or method of delivery is available at any particular payment office and retains the latitude to use the format and delivery method most convenient to the Government. If the Government makes payment by check in accordance with paragraph (a) of this clause, the Government shall mail the payment information to the remittance address in the contract.
. The Contractor shall provide the following information to the designated office. (j) EFT information The Contractor may supply this data for this or multiple contracts (see paragraph (b) of this clause). The Contractor shall designate a single financial agent per contract capable of receiving and processing the EFT information using the EFT methods described in paragraph (c) of this clause.
The contract number (or other procurement identification number).(1)
The Contractor's name and remittance address, as stated in the contract(s).(2)
The signature (manual or electronic, as appropriate), title, and telephone number of the Contractor (3) official authorized to provide this information.
The name, address, and 9-digit Routing Transit Number of the Contractor's financial agent.(4)
The Contractor's account number and the type of account (checking, saving, or lockbox).(5)
If applicable, the Fedwire Transfer System telegraphic abbreviation of the Contractor's financial (6) agent.
If applicable, the Contractor shall also provide the name, address, telegraphic abbreviation, and 9-(7) digit Routing Transit Number of the correspondent financial institution receiving the wire transfer payment if the Contractor's financial agent is not directly on-line to the Fedwire Transfer System; and, therefore, not the receiver of the wire transfer payment.
(End of clause)
52.222-36 Equal Opportunity for Workers with Disabilities. (Alternate I) ALT I 2014-07
Alternate I . As prescribed in (b), add the following as a preamble to the clause:(JUL 2014) 22.1408
Notice: The following term(s) of this clause are waived for this contract: [List term(s)].____________
File details come from the government source that posted it. Updated .