CLIN0001 ORDERING DATA.pdf
PDF 52 KB Posted
- Attached to
- EXPANSION JOINT Federal contract opportunity
- Solicitation number
- SPMYM224Q1849
About this file
This document contains ordering data for an ASTM-F-1123 non-metallic expansion joint required under a federal contract opportunity. The key details are:
The expansion joint has a 42-inch inside diameter, a 12-inch +/- 3/16-inch face-to-face dimension, a minimum operating pressure of 21 psig, a maximum operating pressure of 40 psig, a minimum operating temperature of 60°F, and a maximum operating temperature of 105°F. It requires one-sided flange drilling per MIL-PRF-20042. The fluid to be handled is seawater, and a hydrostatic test at 60 psig and 105°F is required.
The related federal contract opportunity, Solicitation Number SPMYM224Q1849, is for a firm fixed-price supply contract for an expansion joint, to be awarded as a 100% small business set-aside. The offer submission deadline is July 2, 2024 by 1:00 PM PDT, and delivery is required to Bremerton, WA. Offerors must comply with NIST SP 800-171 requirements unless the items are determined to be commercial off-the-shelf.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM224Q1849.pdf | ||
| CLIN0003 ORDERING DATA.pdf | ||
| 1360 CDRL_EXHIBIT A.pdf | ||
| 1370 CDRL_EXHIBIT B.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 4136-1360
ICN: 38RNO25605 KO: S01 KOI: 001
Paragraph 4 Ordering Data
ASTM-F-1123, STANDARD SPECIFICATION FOR NON-METALLIC EXPANSION JOINTS,
dated 31 DECEMBER 1987 (Reapproved 2019)
(From ASTM-F-1123) 4.1 Orders for products under this specification shall include the following information:
4.1.1 Inside diameter of connecting pipes (joint ID): 42"
4.1.2 Face-to-face dimension that is the flange-to-flange dimension into which the expansion joint is to be installed: 12 inches ± 3/16 inch
4.1.3 Maximum and minimum operating pressure in pounds-force per square inch gage (pascals): 21 psig min, 40 psig max
4.1.4 Maximum and minimum operating temperature in °F (°C): 60°F min, 105°F max
4.1.5 Flange drilling in accordance with the appendix titled “Common Flange Dimension/Drilling Chart’’ of the Technical Handbook on Rubber Expansion Joints and Flexible Pipe Connectors (herein referred to as the Technical Handbook) or in accordance with special customer requirements: DRILL ONE FLANGE ONLY - 38 (ea) 1-5/16" ± 1/64" dia holes on a 47-3/4" ± 5/16" bolt dia circle (per MIL-PRF-20042 Table XII)
4.1.6 Fluid to be handled: Seawater
4.1.7 This ASTM specification designation: ASTM F1123-87 (2019)
4.1.8 Movement data requirements (including shock or vibratory excursions if applicable):
Not Required
4.1.9 Design certification burst test if required (see 9.1): Not Required
4.1.10 Hydrostatic or special tests if required (see 9.2): Hydrostatic Test required
4.1.11 Certification of expansion joint if required (see Section 12): Not Required
4.1.12 Certified detailed drawing of the expansion joint if required (see 12.2): Not Required
Additional Data requirements: Perform hydrostatic test at 60 psig at 105°F (1.5 times max allowable operating pressure at max operating temperature) . Certified test report is required.
All unit, intermediate, and shipping containers must be marked in accordance with MIL-STD-129. Refer to DLA Procurement Note C20 for further instructions.
File details come from the government source that posted it. Updated .