CLIN 0001 MATERIAL ORDERING DATA MIL-C-15726_Redacted.pdf
PDF 120 KB Posted
- Attached to
- NPS PIPE ELBOW, PIPE METALLIC, AND REDUCER CUNI Federal contract opportunity
- Solicitation number
- SPMYM224Q2024
About this file
This document appears to be Material Ordering Data for MIL-C-15726, a specification for copper-nickel alloy sheet, plate, strip, bar, rod, and wire. The key details include: the current specification revision and amendment, required alloy composition and form, allowable manufacturing techniques, dimensional tolerances, inspection and testing requirements, and packaging instructions.
The related federal contract opportunity is for NPS pipe elbows, pipe metallic, and reducers made of copper-nickel alloy. The solicitation SPMYM224Q2024 will be issued as a 100% small business set-aside using commercial and simplified acquisition procedures. The resultant contract will be a firm-fixed price supply contract for FOB destination delivery to Bremerton, WA. Offerors must provide information on their NIST SP 800-171 compliance status and the manufacturer/country of origin for the quoted items.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM224Q2024 26 JULY 2024.pdf | ||
| CLIN 0002 MATERIAL ORDERING DATA MIL-T-16420K_Redacted.pdf | ||
| CLIN 0003 MATERIAL ORDERING DATA MIL-C-15726_Redacted.pdf | ||
| SPMYM224Q2024.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-C-15726
IDN: N4523A 4177-1000
KO: S03 KOI: 006
Paragraph 6.2 Ordering Data
Preparer's note: Forgings previously procured to this specification are now procured to MIL- C-24679.
a. MIL-C-15726F, Copper-Nickel Alloy, Sheet, Plate, Strip, Bar, Rod and Wire dated 25 October 1988; including Amendment 1, dated 8 October 1991
b. Current issue of DODISS is to be cited in the solicitation.
c. Composition: Alloy C71500 (formerly 70-30) Form: Select one:
Temper: Select one:
d. Is a specific manufacturing technique required? If yes, specify: MIL-C-15726
3.1 Unless otherwise specified, material shall be finished by such hot working, cold working, or heat treatment as may be necessary to meet the properties specified.
e. Dimensions: MIL-C-15726
3.7 Unless otherwise specified, tolerances shall be specified in FED-STD-146.
3.7.1 When specified, tolerances shall be all plus or all minus.
f. Is alloy identity test required? NA
3.9.2 When specified, each random mill length, prior to cutting to ordered length, and each forging shall be shown to be of the correct generic metallurgical group after final marking.
g. Is sampling for visual and dimensional inspections other than specified? If yes, specify: NA
4.2.4 Sampling shall be as specified.
6.7 Unless otherwise specified (see 4.2.4), sampling should be in accordance MIL-STD-105, general inspection level II, acceptable quality level 1.5.
h. Is nondestructive inspection required? If yes, specify: NA
4.2.5 Liquid penetrant inspection shall be in accordance with MIL-STD-271.
i. Is liquid penetrant inspection other than specified? If yes, specify: NA
4.3.3.2 Liquid penetrant inspection shall be in accordance with MIL-STD-271. (Amendment 1)
j. Method used for alloy identity test: NA
4.5.1 Method of test for alloy identity shall be by an approved procedure.
k. Level of packing and packaging: MIL-C-15726
5.1 The material shall be packaged to level A or C; packed to level A, B, or C, as specified and marked in accordance with MIL-C-3993.
Additional Data Requirements: NA
File details come from the government source that posted it. Updated .