Class 1 Tubular Nylon Textile Webbing - Tech Data.docx

WEBBING,TEXTILE

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

The following information is for each NSN contained under PGC90260:

Shall be in accordance with (IAW) Parachute Industry Association PIA-W-5625G, WEBBING, TEXTILE, NYLON, TUBULAR dated 1 March 2024.

Intended for use in the manufacture of parachute equipment, clothing and other equipment.

All NSNs contained under PGC90260 are identified as Critical Application Items (CAI).

Cloth Name: Plain weave Design Type: Tubular Fiber material: Nylon Procurement Group Code (PGC): 90260 Class: 1 (Shuttle loom) Unit of issue is a YARD (YD).

Each roll or spool of finished webbing shall be marked for identification in accordance with good commercial practice.

A durable tag shall be attached to each roll or spool, which shall be clearly and legibly printed with water soluble ink with the following information:

- National Stock Number or NSN

- Nomenclature or Official Item Name (WEBBING,TEXTILE)

- Specification number (PIA-W-5625G)

- Yardage

- Contract number and date of manufacture (month and year)

- Contractor’s name

- Name of contracting agency (Defense Logistics Agency or DLA) Each spool of webbing shall be labeled, or ticketed, for fiber content in accordance with the Rules and Regulations Under the Textile Fiber Products Identification Act.

The textile manufacturer shall properly identify the age of the textile materials by placing a tag on the finished goods, or label the containers identifying the specification to which the material is manufactured, the lot number, and the date of manufacture. The date of manufacture is defined as the date (month and year) of the last manufacturing process that affects the physical characteristics of the material.

TEST REPORTS AND COMPONENT CERTIFICATIONS IN ACCORDANCE WITH

DLA TROOP SUPPORT CLOTHING & TEXTILES ADDITIONAL QUALITY ASSURANCE REQUIREMENTS, Revision 1 dated 1 August 2021 (superseding DPSCM-4155.3 dated 3 November 1997) ARE REQUIRED WITH ALL CONTRACT COMPONENT LOTS.

**In lieu of the abovenamed requirement, if the total contract award does NOT exceed $100,000, the contract awardee may submit a Certificate of Conformance (CoC) per 3.1.3 of the DLA Troop Support Clothing and Textiles (C&T) Additional Quality Assurance Requirements (AQAR), Revision 1 dated August 2021.**

SOURCES OF COMPONENT MATERIALS SHALL BE IDENTIFIED,

INCLUDING APPLICABLE SPECIFICATIONS, AND SHALL NOT

BE CHANGED THROUGHOUT THE LIFE OF THE CONTRACT

WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP

SUPPORT CONTRACTING OFFICER THROUGH MODIFICATION

TO THE CONTRACT.

RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS

RESPONSIBLE FOR THE PERFORMANCE OF ALL INSPECTION,

EXAMINATION, AND TEST REQUIREMENTS SPECIFIED

HEREIN AND IN THE SITED SPECIFICATIONS AND CONTRACT.

THE GOVERNMENT RESERVES THE RIGHT TO PERFORM ANY

OF THE INSPECTIONS, EXAMINATIONS AND TESTS AS

DEEMED NECESSARY TO ENSURE SUPPLIES AND SERVICES

CONFORM TO PRESCRIBED REQUIREMENTS.

RT001: MEASURING AND TEST EQUIPMENT

52.246-15 CERTIFICATE OF CONFORMANCE

GOVERNMENT LABORATORY TESTING OF COMPONENTS FOR ACCEPTANCE PURPOSE

FOR PHYSICAL (NON-SHADE) TESTING:

*Only applicable if the total contract award exceeds $100,000*

**In lieu of the abovenamed requirement, if the total contract award does NOT exceed $100,000, the contract awardee may submit a Certificate of Conformance (CoC) per 3.1.3 of the DLA Troop Support Clothing and Textiles (C&T) Additional Quality Assurance Requirements (AQAR), Revision 1 dated August 2021.** THE VENDOR SHALL NOTIFY THE DLA Product Test Center -- Analytical FOURTEEN (14) CALENDAR DAYS TO THIRTY (30) CALENDAR DAYS IN ADVANCE OF WHEN LOTS ARE TO BE PRESENTED FOR SAMPLING AT THE ADDRESS BELOW.

THE CONTRACTOR'S APPROVED QUALIFIED LABORATORY WILL BE REQUIRED TO FORWARD A COMPLETED TEST REPORT FOR EACH LOT OF COMPONENTS TO THE ADDRESS BELOW. THE SUPPLIER'S SOURCE SAMPLING REPRESENTATIVE WILL PROVIDE THE COMPLETED DD FORM 1222 dated March 2021 TO THE LABORATORY TO BE SUBMITTED WITH THE COMPLETED TEST REPORT. TEST REPORTS SHALL NOT BE OLDER THAN NINETY (90) CALENDAR DAYS.

LOT NOTIFICATIONS AND SOURCE SAMPLING DD1222s/TEST REPORTS SHALL BE FORWARDED TO:

paactlab@dla.mil

SAMPLES FOR PHYSICAL TESTING WILL ONLY BE FORWARDED UPON REQUEST TO:

DLA Product Test Center -- Analytical 700 Robbins Avenue, BLDG 5D Philadelphia, PA 19111 EMAIL: paactlab@dla.mil

NOTE: PERMIT 45 CALENDAR DAYS

SHADE EVALUATION OF CONTRACTOR FURNISHED MATERIALS:

SHADE SAMPLING IS APPLICABLE (Natural color is not applicable)

The color of the test specimen shall match the standard sample when viewed using AATCC Evaluation Procedure 9, Visual Assessment of Color Difference of Textiles, Option C (2017e), with sources simulating artificial daylight D65 illuminant with a color temperature of 6500 (+/- 200)K, with illumination of 100 (+/- 20) foot candles, and shall be a good match to the standard sample under incandescent lamplight at 2856 (+/- 200)K.

FOR SHADE TESTING: THE COMPLETED HARDCOPY DD FORM 1222 AND THE SWATCHES SHALL BE FORWARDED TO:

DLA Product Testing Center Analytical 700 Robbins Avenue, BLDG 5D Philadelphia, PA 19111 ATTN: Andrew Gabriele EMAIL: ptc_a.shade@dla.mil

PHONE: 215-737-6121

NOTE: PERMIT 30 CALENDAR DAYS.

Identification of Testing Sites. Unless the contract mandates a Government laboratory be used to conduct testing, the prime contractor shall identify all testing sites that will perform any test required by the terms of the contract, including end item testing.

Any laboratory proposed by the contractor is subject to the approval of the contracting officer. Testing facilities shall be subject to on-site witnessing of testing by the Government. The use of a laboratory previously approved by the Government is not a guarantee that testing will be performed properly, nor does it relieve a contractor from the contractual obligation to present conforming supplies accompanied by true, accurate, and valid test results.

Certification of Testing Sites. The prime contractor shall identify a technical point of contact for the testing site and provide current contact information. The prime contractor should alert the technical point of contact that the certification process has begun. A current ISO 17025 accreditation whose scope encompasses the contractual testing or equivalent will be accepted. When a testing site and its contact information are provided to DLA Contracting and the DLA Product Specialist, the product specialist will initiate a request for the DLA Product Test Center (DLA-PTC) to certify the lab. This request will be managed via an internal DLA Troop Support process.

In the absence of an appropriate ISO 17025 accreditation, the DLA-PTC will compare all required testing in the contract to the commercial lab capability. If the testing facility is new and/or unknown to the DLA-PTC, a lab certification survey (DLA Form 6005) will be provided for submission.

If the DLA-PTC has a lab survey on file that is less than 3 years old, that survey will be used for the initial evaluation. The DLA-PTC may ask for additional information or clarifications. If the laboratory survey on file is over 3 years old, a new form will be sent out for the testing facility to fill out. During a contract, the laboratory may be asked to fill out another lab survey when the original survey becomes older than 3 years.

Note: The Qualified Laboratories List (QLL) previously maintained by DPSC has been canceled. No testing facility should refer to their previously issued QLL number.

Approval. If the testing facility and its named subcontractors meet the capability of the required testing, the DLA-PTC will notify the DLA Troop Support Product Specialist. Once approved by contracting, the testing facility becomes the Place of Performance and is placed in the contract.

Disapproval. If a testing facility does not meet the testing capability as per the specifications, the prime contractor is asked to submit another laboratory, and the process starts anew.

Note: DLA will require a total of 45 calendar days from the date of the receipt of the request to add a certified testing location to the date the requestor (contractor) is provided a decision of the laboratory certification.

Identification of Testing Sites. Unless the contract mandates a Government laboratory be used to conduct testing, the prime contractor shall identify all testing sites that will perform any test required by the terms of the contract, including end item testing.

The prime contractor shall identify a technical point of contact for the testing site and provide current contact information to DLA Contracting and the DLA Product Specialist. The prime contractor should alert the technical point of contact that the certification process has begun.

Note: DLA will require a total of 45 calendar days from the date of receipt of the request to add a certified testing location to the date the requestor (contractor) is provided a decision of the laboratory certification.

For more details on the lab certification process, see the C&T Additional Quality Assurance Requirements, which is incorporated by reference into this contract.

3/4/2025

INDIVIDUAL NSN DATA

Intended for use in parachute construction. The 3/8 inch webbing is utilized for drogue chute shroud lines of a parachute deploying system.

NSN 8305-00-082-5750, PGC90260

Cloth Name: Plain weave Design Type: Tubular Width: 0.562 (9/16) ± 0.06 (1/16) inches;

0.50 inches minimum to 0.62 inches maximum Thickness: 0.090 inches maximum Weight: 0.60 ounces per linear yard maximum Breaking strength: 1500 pounds minimum Fiber material: Nylon Color: Natural Procurement Group Code (PGC): 90260 Length and put-up: 315 yards minimum to 325 yards maximum Class: 1 (Shuttle loom)

NSN 8305-00-082-5751, PGC90260

Cloth Name: Plain weave Design Type: Tubular Width: 0.75 (3/4) ± 0.06 (1/16) inches;

0.69 inches minimum to 0.81 inches maximum Thickness: 0.120 inches maximum Weight: 1.05 ounces per linear yard maximum Breaking strength: 2300 pounds minimum Fiber material: Nylon Color: Natural Procurement Group Code (PGC): 90260 Length and put-up: 190 yards minimum to 200 yards maximum Class: 1 (Shuttle loom)

NSN 8305-00-082-5752, PGC90260

Cloth Name: Plain weave Design Type: Tubular Width: 0.50 (1/2) ± 0.06 (1/16) inches;

0.44 inches minimum to 0.56 inches maximum Thickness: 0.090 inches maximum Weight: 0.50 ounces per linear yard maximum Breaking strength: 1,000 pounds minimum Fiber material: Nylon Color: Natural Procurement Group Code (PGC): 90260 Class: 1 (Shuttle loom) Length of put-up:

390 yards per spool minimum to 400 yards per spool maximum

NSN 8305-00-082-5753, PGC90260

Cloth Name: Plain weave Design Type: Tubular Width: 1 ± 0.06 (1/16) inches;

0.94 inches minimum to 1.06 inches maximum Thickness: 0.120 inches maximum Weight: 1.70 ounces per linear yard maximum Breaking strength: 4,000 pounds minimum Fiber material: Nylon Color: Natural Procurement Group Code (PGC): 90260 Class: 1 (Shuttle loom) Length of put-up:

115 yards per spool minimum to 125 yards per spool maximum

NSN 8305-00-261-8582, PGC90260

Cloth Name: Plain weave Design Type: Tubular Width: 0.562 (9/16) ± 0.06 (1/16) inches;

0.50 inches minimum to 0.62 inches maximum Thickness: 0.090 inches maximum Weight: 0.60 ounces per linear yard maximum Breaking strength: 1,500 pounds minimum Fiber material: Nylon Color: Olive Drab CARC, Chip Number: 34088, IAW AMS-STD-595; replaces Olive Drab #7 and Olive Drab #107 according to PIA-C-7219C, Section 6.3 (Standards).

Procurement Group Code (PGC): 90260 Class: 1 (Shuttle loom) Length of put-up:

315 yards per spool minimum to 325 yards per spool maximum

NSN 8305-00-268-2453, PGC90260

Cloth Name: Plain weave Design Type: Tubular Width: 0.50 (1/2) ± 0.06 (1/16) inches;

0.44 inches minimum to 0.56 inches maximum Thickness: 0.090 inches maximum Weight: 0.50 ounces per linear yard maximum Breaking strength: 1,000 pounds minimum Fiber material: Nylon Color: Olive Drab CARC, Chip Number: 34088, IAW AMS-STD-595; replaces Olive Drab #7 and Olive Drab #107 according to PIA-C-7219C, Section 6.3 (Standards) Procurement Group Code (PGC): 90260 Class: 1 (Shuttle loom) Length of put-up:

390 yards per spool minimum to 400 yards per spool maximum

NSN 8305-00-268-2455, PGC90260

Cloth Name: Plain weave Design Type: Tubular Width: 1 inch ± 0.06 (1/16) inches;

0.94 inches minimum to 1.06 inches maximum Thickness: 0.120 inches maximum Weight: 1.70 ounces per linear yard maximum Breaking strength: 4,000 pounds minimum Fiber material: Nylon Color: Olive Drab CARC, Chip Number: 34088, IAW AMS-STD-595; replaces Olive Drab #7 and Olive Drab #107 according to PIA-C-7219C, Section 6.3 (Standards) Procurement Group Code (PGC): 90260 Length of put-up (Yards of spool):

115 yards minimum to 125 yards maximum Class: 1 (Shuttle loom)

NSN 8305-00-753-3258, PGC90260

Cloth Name: Plain weave Design Type: Tubular Width: 0.625 (5/8) ± 0.06 (1/16) inches;

0.57 inches minimum to 0.69 inches maximum Thickness: 0.100 inches maximum Weight: 0.75 ounces per linear yard maximum Breaking strength: 2,250 pounds minimum Fiber material: Nylon Color: Natural Procurement Group Code (PGC): 90260 Class: 1 (Shuttle loom) Length of put-up:

250 yards per spool minimum to 260 yards per spool maximum

NSN 8305-00-753-3311, PGC90260

Cloth Name: Plain weave Design Type: Tubular Width: 0.50 (1/2) ± 0.06 (1/16) inches;

0.44 inches minimum to 0.56 inches maximum Thickness: 0.090 inches maximum Weight: 0.50 ounces per linear yard maximum Breaking strength: 1,000 pounds minimum Fiber material: Nylon Color: Sage Green, US Air Force, 1531; Roll Number 2169 Procurement Group Code (PGC): 90260 Class: 1 (Shuttle loom) Length of put-up:

390 yards per spool minimum to 400 yards per spool maximum

NSN 8305-00-753-6529, PGC90260

Cloth Name: Plain weave Design Type: Tubular Width: 1.00 ± 0.06 (1/16) inches;

0.94 inches minimum to 1.06 inches maximum Thickness: 0.120 inches maximum Weight: 1.70 ounces per linear yard maximum Breaking strength: 4,000 pounds minimum Fiber material: Nylon Color: Yellow, US Air Force, 1365; Roll Number 92-06 Procurement Group Code (PGC): 90260 Class: 1 (Shuttle loom) Length of put-up:

115 yards per spool minimum to 125 yards per spool maximum

NSN 8305-00-753-6531, PGC90260

Cloth Name: Plain weave Design Type: Tubular Width: 0.75 ± 0.06 (1/16) inches;

0.69 inches minimum to 0.81 inches maximum Thickness: 0.120 inches maximum Weight: 1.05 ounces per linear yard maximum Breaking strength: 2,300 pounds minimum Fiber material: Nylon Color: Yellow, US Air Force, 1365; Roll Number 92-06 Procurement Group Code (PGC): 90260 Class: 1 (Shuttle loom) Length of put-up:

190 yards per spool minimum to 200 yards per spool maximum

NSN 8305-00-823-6889, PGC90260

Cloth Name: Plain weave Design Type: Tubular Width: 0.562 (9/16) ± 0.06 (1/16) inches;

0.50 inches minimum to 0.62 inches maximum Thickness: 0.090 inches maximum Weight: 0.60 ounces per linear yard maximum Breaking strength: 1,500 pounds minimum Fiber material: Nylon Color: Yellow, US Air Force, 1365; Roll Number 92-06 Procurement Group Code (PGC): 90260 Class: 1 (Shuttle loom) Length of put-up:

315 yards per spool minimum to 325 yards per spool maximum

NSN 8305-00-823-6940, PGC90260

Cloth Name: Plain weave Design Type: Tubular Width: 0.625 (5/8) ± 0.06 (1/16) inches;

0.57 inches minimum to 0.69 inches maximum Thickness: 0.100 inches maximum Weight: 0.75 ounces per linear yard maximum Breaking strength: 2,250 pounds minimum Fiber material: Nylon Color: Yellow, US Air Force, 1365; Roll Number 92-06 Procurement Group Code (PGC): 90260 Length of put-up (Yards of spool):

250 yards minimum to 260 inches maximum Class: 1 (Shuttle loom) 3/4/2025