CL20176002 (1000099162) PID-PACK (asof24JUN20).pdf

CL20176002 (1000099162) PID‐PACK (asof24JUN20) *** LTC PID Packaging Consolidated Text ***

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM

DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:016211957

MAINTENANCE KIT,VEH

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ032

EXCEPTION TO THE KIT DRAWING; COMPONENT LIST; APPROVED CAGE AND PART

NUMBER: ADDITIONAL COMPONENT SOURCES CAN BE PROVIDED IF THE KIT DRAWING

LISTS A NSN. THE COMPLETE LIST OF APPROVED CAGE AND PART NUMBERS CAN BE

FOUND ON THE TOTAL ITEM RECORD (TIR) FOR EACH NSN. ONLY THE CAGE AND

PART NUMBERS WITH RNCC‐RNVC CODES OF 3‐2 AND 5‐2 ARE APPROVED. TO ACCESS

THE TIR FOR EACH NSN, GO TO: http://www.dla.mil/HQ/InformationOperations /LogisticsInformationServices/FOIARea ding.aspx THEN DOWNLOAD PUB LOG FLIS (PubLogFlisSearch.zip) AND INSTRUCTIONS ONCE PUB LOG FLIS IS

DOWNLOADED, INPUT THE LAST 9 DIGITS OF THE NSN IN THE NIIN FIELD AND

SEARCH.

REFERENCE NUMBER:IKT02

REFERENCE NUMBER:CA070

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:RS023

REFERENCE NUMBER:CS187

IAW BASIC DRAWING NR 19207 57K9293

REVISION NR A DTD 07/24/2018

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL‐STD‐129R(2)

REVISION NR R DTD 09/27/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K9293

REVISION NR DTD 06/19/2018

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA ‐ MIL‐STD‐2073‐1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C

UNIT CONT:XX OPI:O

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL‐STD‐129.

SPECIAL MARKING CODE:00 ‐00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:CS259

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW‐ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT ‐ ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON‐ACCEPTED SUPPLIES

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export‐control of either the International Traffic in Arms regulations

(ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225‐7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export‐control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export‐Controlled Technical Data Training and the DLA Export‐Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export‐controlled data. Instructions for obtaining access to the export‐controlled data can be found at:

https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export‐controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export‐controlled data.

REFERENCE NUMBER IKT02

KIT QUALITY PROVISION

1. THIS REQUIREMENT APPLIES TO MATERIAL SUPPLIED

TO THE GOVERNMENT AS A KIT.

2. THE CONTRACTOR SHALL COMPLY WITH ALL

APPLICABLE QUALIFIED PRODUCTS LIST (QPL)

REQUIREMENTS FOR THE KIT COMPONENTS BEING

SUPPLIED.

3. THE CONTRACTOR SHALL INCORPORATE A SYSTEM FOR

OBTAINING, HANDLING AND SUPPLYING ORIGINAL

EQUIPMENT MANUFACTURER (OEM) CERTIFIED PARTS

INTO ALL CONTRACTUAL DOCUMENTS ENTERED INTO WITH

ITS VENDORS.

4. THE CONTRACTOR SHALL IMPLEMENT AN INSPECTION

SYSTEM, WHICH WILL INCLUDE INSPECTION OF ALL

PARTS UPON RECEIPT TO ENSURE CONFORMANCE WITH

REQUIREMENTS AND TO ENSURE THAT THEY ARE NOT

DAMAGED.

5. THE CONTRACTOR SHALL MAINTAIN A SYSTEM OR

PROCESS THAT WILL ENSURE TRACEABILITY OF ALL

PARTS, THROUGH AN UNBROKEN SUPPLY CHAIN, TO THE

MANUFACTURER.

6. THE CONTRACTOR'S INSPECTION SYSTEM AND

PROCEDURE FOR ENSURING PARTS TRACEABILITY SHALL

BE AVAILABLE FOR REVIEW BY THE GOVERNMENT AT THE

REQUEST OF THE CONTRACTING OFFICER.

7. THE CONTRACTOR SHALL FURNISH ONLY THOSE PARTS

THAT ARE KNOWN TO BE ACCEPTABLE TO THE

GOVERNMENT, I.E. SOLE SOURCE PARTS, APPROVED

SOURCE PARTS, ACCEPTABLE SOURCE PARTS, AS

REFLECTED IN THE GOVERNMENT'S CONTRACT

TECHNICAL DATA FILE (CTDF).

8. UNLESS OTHERWISE APPROVED IN ADVANCE BY THE

CONTRACTING OFFICER, THE CONTRACTOR SHALL SUPPLY

ONLY NEW AND UNUSED PARTS THAT ARE NOT

GOVERNMENT SURPLUS PARTS.

REFERENCE NUMBER CA070

FULL AND OPEN COMPETITION APPLY

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL‐STD‐1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL‐STD‐1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL‐STD‐105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON‐CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER RS023

RS023: Shelf‐life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non‐extendable) applies to this item.

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER CS259

"PRESERVATION & PACKAGING SHALL BE

I/A/W THE LATEST REVISION OF MILITARY

SPECIFICATION MIL‐STD‐2073‐1 APPENDIX D,

FOR PACKAGING OF "KITS".