CIF_PWS_DRAFT.pdf

Ver. October 2022

PERFORMANCE WORK STATEMENT (PWS)

FOR

Central Issue Facility Laundry Services

1.0 General:

1.1 Scope: Contractor shall furnish all labor, equipment, supervision, management, supplies, facilities, including transportation of equipment to contractor owned/contractor operated laundry facility to accomplish the required gear cleaning service and tasks for accomplishment of complete laundry services, as described in this PWS for the CIF. All services are to be performed in accordance with standard industry care tag processes and quality control measures. The applicable Department of Labor Wage Rates are listed following the Statement of Work.

1.2 Background: CIF is an issuing facility of Organizational Clothing and Individual Equipment (OCIE) for all service members in the Alabama National Guard. Contract with four-year option previously established and set to expire 28 September 2026.

1.3 Period of Performance (PoP): The Period of Performance shall be one (1) Base Year of 12 months and four (4) 12-month option years.

1.4 General Information:

1.4.1 Place and Performance of Services: The contractor shall provide services during the current hours of operations on Tuesday through Friday 0700 – 1730 except on recognized US holidays. Performance shall be at vendors assigned location for services. The contractor shall at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility/installation is not closed for the above reasons. When hiring personnel, the contractor shall keep in mind that the stability and continuity of the workforce are essential. All pickups will occur at 1740 Congressman W. L. Dickinson Drive, Montgomery, AL. 36109.

1.4.1.1. Reserved

1.4.1.2 Unscheduled gate closures by the Security Police may occur at any time causing all personnel entering or exiting a closed installation to experience a delay.

This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges.

1159182491.CIV

Cross-Out

1.4.1.3 The contractor’s employees shall become familiar with and obey the regulations of the installation; including fire, traffic, safety and security regulations while on the installation. Contractor employees should only enter restricted areas when required to do so and only upon prior approval. All contractor employees shall carry proper identification with them at all times, and shall be subject to such checks as may be deemed necessary. The contractor shall ensure compliance with all regulations and orders of the installation, which may affect performance. The Government reserves the right to direct the removal of an employee from Government property or revoke access to Government systems for misconduct, security reasons, or any overt evidence of communicable disease. Removal of contractor employees for reasons stated above does not relieve the Contractor from responsibility for total performance of this contract.

1.4.2 Recognized Holidays: The following are recognized United States (US) holidays.

The contractor shall perform services on these days:

1.4.2.1 New Year’s Day: January 1st

1.4.2.2 Martin Luther King, Jr.’s Birthday

1.4.2.3 President’s Day

1.4.2.4 Memorial Day

1.4.2.5 Juneteenth National Independence Day: June 19th

1.4.2.6 Independence Day: July 4th

1.4.2.7 Labor Day

1.4.2.8 Columbus Day

1.4.2.9 Veteran’s Day: November 11th

1.4.2.10 Thanksgiving Day

1.4.2.11 Christmas Day: December 25th

1.4.3 Quality Control (QC): The contractor shall develop and maintain an effective QC Plan (QCP) to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s QCP is the means by which it assures itself that its work complies with the requirements of the contract. As a minimum, the contractor shall develop QC procedures that address the areas identified in Technical Exhibit 1, Performance Requirements Summary (PRS).

1.4.4 Quality Assurance (QA): The Government will evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the Government will do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and acceptable quality level(s) or defect rate(s).

1.4.5 Installation Access and Security Requirements. The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the COR. The contractor and all associated subcontractor employees shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services, or Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by Department of Defense (DoD), Headquarters Department of Army (HQDA) and/or local policy (see PWS 6.0). Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes.

1.4.5.1. - 1.4.5.4 Reserved

1.4.5.5 Communications Security/Information Technology (COMSEC/IT) Security. All communications with DoD organizations are subject to COMSEC review. All telephone communications networks are continually subject to intercept by unfriendly intelligence organizations. DoD has authorized the military departments to conduct COMSEC monitoring and recording of telephone calls originating from, or terminating at, DoD organizations. Therefore, the contractor is advised that any time contractor personnel place or receive a call they are subject to COMSEC procedures. The contractor shall ensure wide and frequent dissemination of the above information to all employees dealing with DoD information. The contractor shall abide by all Government regulations concerning the authorized use of the Government's computer network, including the restriction against using the network to recruit Government personnel or advertise job openings.

1.4.5.6 - 1.4.5.14 Reserved

1.4.6 Physical Security. The contractor shall safeguard all Government property provided for contractor use. At the close of each work period, Government facilities, equipment and materials shall be secured.

1.4.7. Reserved

1.4.8 Post Award Conference/Periodic Progress Meetings: The contractor agrees to attend any post award conference convened by the KO. The KO, COR and other Government personnel, as appropriate, may meet periodically with the contractor to review the contactor’s performance. At these meetings, the KO will apprise the contractor of how the Government views the contractor’s performance and the contractor shall apprise the Government of problems, if any, being experienced. The contractor shall resolve outstanding issues raised by the Government. Contractor attendance at these meetings shall be at no additional cost to the Government.

1.4.9 Contract Manager (CM): The contactor shall designate a CM who shall ensure performance under this contract. The name of this person, and an alternate who shall act for the contractor when the CM is absent, shall be designated in writing to the KO.

The CM or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The CM shall work through the COR, to resolve issues, receive technical instructions, and ensure adequate performance of services. The CM shall ensure that contractor employees do not perform any services outside the scope of the contract without an official modification issued by the KO. The CM shall ensure contractor employees understand that services performed outside the scope of the contract are performed wholly at the expense of the contractor.

1.4.10. Reserved

1.4.11. Combating Trafficking in Persons: The United States Government has adopted a zero tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not engage in severe forms of trafficking in persons during the period of performance of the contract; procure commercial sex acts during the period of performance of the contract; or use forced labor in the performance of the contract. The Contractor shall notify its employees of the United States Government’s zero tolerance policy, the actions that will be taken against employees for violations of this policy. The contractor shall take appropriate action, up to and including termination, against employees or subcontractors that violate the US Government policy as described at

FAR 22.17.

1.4.12. Reserved

1.4.13. Reserved

1.4.14 Organizational Conflicts of Interest (OCI): The contractor and subcontractor personnel performing services under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent OCIs, as defined in FAR Subpart 9.5. The contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI. The contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the KO. In the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may impose other remedies as he or she deems necessary, including prohibiting the contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.4.15. Reserved

2.0 Definitions and Acronyms:

2.1 Definitions:

2.1.1 Central Issue Facility (CIF): Army issuing facility used for receiving, storing, issuing, and turning in Organizational Clothing and Individual Equipment (OCIE) issued to Soldiers.

2.1.2 Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

2.1.3 Contracting Officer (KO): A person with authority to enter into, administer, or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.4 Contracting Officer Representative (COR): An employee of the U.S. Government designated by the KO to monitor contractor performance. Such appointment will be in writing and will state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications.

This individual does NOT have authority to change the terms and conditions of the contract.

2.1.5 Defective Service: A service output that does not meet the standard of performance associated with the PWS.

2.1.6 Deliverable: Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

2.1.7 Key Personnel: Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.8 Organizational Clothing & Individual Equipment (OCIE): Mission essential Army owned equipment.

2.1.9 Physical Security: Actions that prevent the loss or damage of Government property.

2.1.10 Quality Assurance: The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.11 Quality Assurance Surveillance Plan (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.12 Quality Control: All necessary measures taken by the Contractor to ensure that the quality of an end product or service shall meet contract requirements.

2.1.13 Subcontractor: One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.2 Acronyms

CIF Central Issue Facility CM Contract Manager COR Contracting Officer Representative COMSEC Communications Security DFARS Defense Federal Acquisition Regulation Supplement DoD Department of Defense FAR Federal Acquisition Regulation FPCON Force Protection Condition HQDA Headquarters, Department of the Army IT Information Technology KO Contracting Officer OCI Organizational Conflict of Interest OCIE Organizational Clothing and Individual Equipment PoP Period of Performance PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program TE Technical Exhibit TM Technical Manual USPFO United States Property and Fiscal Office

3.0. Reserved

4.0. Reserved

5.0 Requirements: The contractor shall:

5.1. The Contractor shall provide cleaning services of OCIE in accordance with this PWS. All items listed in Technical Exhibit (TE) 4 are expected to be free of all dirt and grime prior to being returned to CIF.

5.1.1. OCIE to be received, inspected, cleaned, packaged, stored and returned are subject to the Contractors’ Quality Assurance.

5.1.2. The cleaning of OCIE shall follow the item-specific care tag instructions. If a care tag does not exist, follow the care instructions listed in the item Technical Manual (TM).

If neither one exist, the Contractor may develop procedures or specifications for these items and submit them for Government approval.

5.1.3. Items are expected to be picked up and dropped off once per month. The CIF manager will coordinate with the contractor for scheduled pick up and drop off times and dates. Items will be picked up and dropped off at the USPFO Warehouse located at 1740 Congressman Dickinson Dr., Montgomery, AL 36109 between the hour of 0730 – 1630, Tuesday – Friday. Pick up and drop off times may be changed in order to meet the needs of the Alabama National Guard mission and will be agreed upon between the Contractor and Contracting Officer Representative (COR) or designated representative.

5.1.4. Contractor and CIF personnel will all ensure that they have an accurate and agreed up count of what is being picked up and dropped off at every meeting. CIF personnel will create a laundry slip prior to every shipment and will be verified with the contractor prior to departure. The COR or designated representative will verify the deliveries and discuss any discrepancies with the contract Project Manager.

5.1.5. All items that are deemed as damaged should be communicated to the CIF Manager or Contracting Officer Representative (COR) immediately upon discovery.

5.1.6. Contractor will submit a check as a method of payment for any damages that are caused by the contractor. The Contractor will make out a check to the US Treasury and given to the United States Property and Fiscal Office (USPF&O) with the current rate of each piece of equipment.

6.0 Applicable Publications: Publications applicable to this PWS are listed below:

Publication (Chapter/Page)

Date of Publication

Mandatory or Advisory

Website

Federal Acquisition Regulation https://www.acquisition.gov/?q=browsefar Defense Federal Acquisition

Regulation Supplement http://www.acq.osd.mil/dpap/dars/dfarspgi/current/in dex.html or https://www.acquisition.gov/dfars Joint Travel Regulation (JTR) https://www.defensetravel.dod.mil/site/travelreg.cfm

DoDM 1000.13-M-V1 DoD Identification (ID) Cards (Enclosure 2, paragraph 3.b)

01/23/2014 (Change 1:

07/28/2020) http://www.esd.whs.mil/Directives/issuances/dodm

Federal Information Processing Standards (FIPS) Publication 201-2 Personal Identity Verification (PIV) of Federal Employees and Contractors

(paragraph 9)

August 2013 http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201 -2.pdf

DoDM 5200.2 Procedures for the DoD Personnel Security Program

(PSP)

04/03/2017 https://www.esd.whs.mil/Directives/issuances/dodm/

DoDI 5200.46 DoD Investigative and Adjudicative Guidance for Issuing the Common

Access Card (CAC)

09/09/14 (Change 1:

05/04/2018) https://www.esd.whs.mil/Directives/issuances/dodi/

Homeland Security Presidential Directive (HSPD)-12

Policy for a Common Identification Standard for Federal Employees and

Contractors

08/27/2004 https://www.dhs.gov/homeland-security-presidential-directive-12

DoDI 5400.11 Department of Defense Privacy and

Civil Liberties Programs

01/29/2019 https://www.acquisition.gov/?q=browsefar http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html https://www.acquisition.gov/dfars http://www.esd.whs.mil/Directives/issuances/dodm http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-2.pdf http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-2.pdf https://www.esd.whs.mil/Directives/issuances/dodm/ https://www.esd.whs.mil/Directives/issuances/dodi/ https://www.dhs.gov/homeland-security-presidential-directive-12 https://www.dhs.gov/homeland-security-presidential-directive-12

DoD 5400.11-R Department of Defense Privacy

Program

05/14/2007 https://www.esd.whs.mil/Directives/issuances/dodm/

DoDD 8140.01 Cyberspace Workforce Management

10/05/2020 https://www.esd.whs.mil/Directives/issuances/dodd/

DoD 8570.01-M Information Assurance Workforce

Improvement Program

12/19/2005 (Change 4:

11/10/2015) https://www.esd.whs.mil/Directives/issuances/dodm/

DoD 5220.22-M National Industrial Security Program

Operating Manual (NISPOM)

02/28/2006 (Change 2:

05/18/2016)

Army Directive 2014-05 Policy and Implementation

Procedures for Common Access Card Credentialing and Installation Access for Uncleared Contractors

03/07/2014 https://armypubs.army.mil/ProductMaps/PubForm/A rmyDir.aspx

AR 25-2

Information Assurance

04/04/2019 http://armypubs.army.mil/ProductMaps/PubForm/AR .aspx

AR 530-1

Operations Security

09/26/2014 http://armypubs.army.mil/ProductMaps/PubForm/AR .aspx

AR 525-13

Antiterrorism

12/09/2019 http://armypubs.army.mil/ProductMaps/PubForm/AR .aspx

AR 381-12

Threat Awareness and Reporting

Program (TARP) (Section II, ¶ 2-4.b)

06/01/2016 http://armypubs.army.mil/ProductMaps/PubForm/AR .aspx

6.1 Applicable Forms: Forms applicable to the PWS are listed below:

Form Date Website

DD 1172-2

Application for Identification Card/DEERS Enrollment

Mar 2017 http://www.dtic.mil/whs/directives/forms/index.htm

I-9 Employment Eligibility Verification

10/21/2019 https://www.uscis.gov/sites/default/files/files/form/i-9.pdf

DD 441

Department of Defense Security

Agreement

Feb 2020 http://www.dtic.mil/whs/directives/forms/dd/ddforms0001- 0499.htm

DD 250

Material Inspection and Receiving

Report

Aug 2000 https://www.esd.whs.mil/Directives/forms/dd0001_0499/ https://www.esd.whs.mil/Directives/issuances/dodd/ https://www.esd.whs.mil/Directives/issuances/dodm/ http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://www.dtic.mil/whs/directives/forms/forminfo/forminfopage2479.html http://www.dtic.mil/whs/directives/forms/forminfo/forminfopage2479.html http://www.dtic.mil/whs/directives/forms/index.htm https://www.uscis.gov/sites/default/files/files/form/i-9.pdf http://www.dtic.mil/whs/directives/forms/dd/ddforms0001-0499.htm http://www.dtic.mil/whs/directives/forms/dd/ddforms0001-0499.htm https://www.esd.whs.mil/Directives/forms/dd0001_0499/

TECHNICAL EXHIBIT 1

Performance Requirements Summary (PRS)

This PRS includes performance objectives the Government will use to determine contractor performance and will compare contractor performance to the Acceptable Quality Level (AQL).

Performance Objective

Standard / Acceptable Quality Level

(AQL)

Method of Measurement

Quality of Cleaning

95% AQL: Items returned are clean, dry, odor-free, and meet CIF serviceability standards without rework.

100% visual inspection by CIF personnel upon receipt; customer complaint logs.

Preservation of Equipment

Zero Defect (100% AQL):

No items damaged, shrunk, or degraded due to improper contractor cleaning methods.

Random sampling of returned gear;

CIF receiving inspections.

Turnaround Time

(TAT)

98% AQL:

Items are cleaned and returned within the agreed-upon timeframe (e.g., 72 or 96 hours from pickup).

Date/Time stamped inventory manifests at pickup and drop-off.

Inventory Accountability

100% AQL: Zero lost or misplaced items while in the contractor's possession.

Reconciliation of incoming vs.

outgoing itemized counts via the Property Book or CIF system of record.

TECHNICAL EXHIBIT 2

Deliverables Schedule

Reserved

TECHNICAL EXHIBIT 3

Estimated Workload Data

Reserved

TECHNICAL EXHIBIT 4

List of Laundry Items

NSN NOMENCLATURE SIZE/CIC

8465-00-530-3692 BAG BARRACK CT OG GREEN

8410-01-666-4077 COAT,MATERNITY S-SHT

8410-01-666-4078 COAT,MATERNITY S-REG

8410-01-666-4079 COAT,MATERNITY S-LNG

8410-01-666-4087 COAT,MATERNITY M-SHT

8410-01-666-4124 COAT,MATERNITY M-REG

8410-01-666-4159 COAT,MATERNITY M-LNG

8410-01-666-4161 COAT,MATERNITY L-SHT

8410-01-666-4162 COAT,MATERNITY L-REG

8410-01-666-4163 COAT,MATERNITY L-LNG

8410-01-666-4168 COAT,MATERNITY XL-RRG

8410-01-666-4169 COAT,MATERNITY XL-LNG

8410-01-666-4203 COAT,MATERNITY XL-SHT

8415-01-641-7116 COVER,HELMET SML/MED

8415-01-641-7119 COVER,HELMET L/XL

8465-01-547-2694 SLEEPING BAG REG URBAN GRAY

8465-01-547-3998 SLEEPING BAG REG COYOTE

8465-01-547-2706 SLEEPING BAG REG FOIL GREEN

8465-01-547-2670 STUFF,SACK LRG FOLI GREEN

8465-01-547-2656 STUFF,SACK SML FOLI GREEN/G

8415-01-580-1332 JACKET CLD WTHR XS RG XSML-R L3

8415-01-580-1334 JCKT COLD WTHR SML S SML-S L3

8415-01-580-1336 JCKT COLD WTHR SML R SML-R L3

8415-01-580-1337 JACKET CLD WTHR SML L SML-L L3

8415-01-580-1341 JACKET CLD WTHR MD RG MED-R L3

8415-01-580-1348 JACKET CLD WTHR MD LG MED-L L3

8415-01-580-1355 JACKET CLD WTHR LRG R LRG-R L3

8415-01-580-1358 JACKET CLD WTHR LRG L LRG-L L3

8415-01-580-1362 JACKET CLD WTHR XL RG XLRG-R L3

8415-01-580-1366 JCKT CLD WTHR XL LNG XLRG-L L3

8415-01-580-1371 JACKET CLD WTHR XXL R XXLRG-R L3

8415-01-580-1377 JACKET CLD WTHR XXL L XXLRG-L L3

8415-01-641-1718 JACKET,COLD WEATHER XSML

8415-01-641-1721 JACKET,COLD WEATHER SML

8415-01-641-1722 JACKET,COLD WEATHER S-LNG

8415-01-641-1726 JACKET,COLD WEATHER MED

8415-01-641-1727 JACKET,COLD WEATHER M-LNG

NSN NOMENCLATURE SIZE/CIC

8415-01-641-1729 JACKET,COLD WEATHER LRG

8415-01-641-1730 JACKET,COLD WEATHER LRG-L

8415-01-641-1733 JACKET,COLD WEATHER XLRG

8415-01-641-1734 JACKET,COLD WEATHER XLRG-L

8415-01-641-1736 JACKET,COLD WEATHER XL-XLNG

8415-01-641-1737 JACKET,COLD WEATHER XXLRG

8415-01-641-1742 JACKET,COLD WEATHER XXL-LNG

8415-01-641-1635 JACKET,COLD WEATHER XMSL L5

8415-01-641-1638 JACKET,COLD WEATHER SML L5

8415-01-641-1639 JACKET,COLD WEATHER S-LNG L5

8415-01-641-1640 JACKET,COLD WEATHER MED L5

8415-01-641-1641 JACKET,COLD WEATHER MED-L L5

8415-01-641-1643 JACKET,COLD WEATHER LRG L5

8415-01-641-1649 JACKET,COLD WEATHER LRG-LNG L5

8415-01-641-1650 JACKET,COLD WEATHER XLRG L5

8415-01-641-1651 JACKET,COLD WEATHER XL-LNG L5

8415-01-641-1653 JACKET,COLD WEATHER XXL L5

8415-01-641-0785 JACKET,EXTREME COLDWE XSML L6

8415-01-641-0806 JACKET,EXTREME COLDWE SML L6

8415-01-641-0808 JACKET,EXTREME COLDWE SML-LNG L6

8415-01-641-0818 JACKET,EXTREME COLDWE MED L6

8415-01-641-0823 JACKET,EXTREME COLDWE MED-LNG L6

8415-01-641-0824 JACKET,EXTREME COLDWE LRG L6

8415-01-641-0827 JACKET,EXTREME COLDWE LRG-L L6

8415-01-641-0829 JACKET,EXTREME COLDWE XLRG L6

8415-01-641-0831 JACKET,EXTREME COLDWE XL-LNG L6

8415-01-641-0840 JACKET,EXTREME COLDWE XXLRG L6

8415-01-641-0841 JACKET,EXTREME COLDWE XXL-LNG L6

8405-01-672-8526 LINER, MULTIPURPOSE OCP

8410-01-666-4389 SLACKS,MATERNITY S-S

8410-01-666-4390 SLACKS,MATERNITY S-R

8410-01-666-4391 SLACKS,MATERNITY S-L

8410-01-666-4402 SLACKS,MATERNITY M-S

8410-01-666-4403 SLACKS,MATERNITY M-R

8410-01-666-4622 SLACKS,MATERNITY M-L

8410-01-666-4628 SLACKS,MATERNITY L-S

8410-01-666-4632 SLACKS,MATERNITY L-R

8410-01-666-4635 SLACKS,MATERNITY L-LNG

8410-01-666-4636 SLACKS,MATERNITY XL-SHT

8410-01-666-4642 SLACKS,MATERNITY XL-REG

NSN NOMENCLATURE SIZE/CIC

8410-01-666-4643 SLACKS,MATERNITY XL-LNG

8415-01-641-1789 TROUSERS,EXTREME COLD XSML

8415-01-641-1793 TROUSERS,EXTREME COLD SML-RG

8415-01-641-1794 TROUSERS,EXTREME COLD S-LNG

8415-01-641-1799 TROUSERS,EXTREME COLD MED

8415-01-641-1800 TROUSERS,EXTREME COLD M-LNG

8415-01-641-1801 TROUSERS,EXTREME COLD LRG

8415-01-641-1802 TROUSERS,EXTREME COLD L-LNG

8415-01-641-1803 TROUSERS,EXTREME COLD XLRG

8415-01-641-1804 TROUSERS,EXTREME COLD XL-LNG

8415-01-641-1807 TROUSERS,EXTREME COLD XXLRG

8415-01-641-1677 TROUSERS,COLD WEATHER XSML L5

8415-01-641-1680 TROUSERS,COLD WEATHER SR L5

8415-01-641-1682 TROUSERS,COLD WEATHER SML-LNG L5

8415-01-641-1683 TROUSERS,COLD WEATHER MED L5

8415-01-641-1685 TROUSERS,COLD WEATHER MED-LNG L5

8415-01-641-1690 TROUSERS,COLD WEATHER LRG L5

8415-01-641-1695 TROUSERS,COLD WEATHER LRG-LNG L5

8415-01-641-1697 TROUSERS,COLD WEATHER XLRG L5

8415-01-641-1701 TROUSERS,COLD WEATHER XL-LNG L5

8415-01-641-1704 TROUSERS,COLD WEATHER XXLRG L5