Characterstics Pictures_Redacted.pdf

Description Bay 1000 mm Bay width (centre to centre) ....................................... : 1150 mm Clear entry between uprights ...................................... : 950 mm Frame depth ................................................................ : 665 mm Upright type ................................................................ : K Inner frame ................................................................. : open riveted Frames on the outside ................................................. : clad Frame height ............................................................... : 2250 mm Shelf depth .................................................................. : 650 mm

Maximum load per shelf (uniformly distributed load): 265 kg Shelves per bay ........................................................... : 6 pcs.

Distance between shelves ........................................... : 400 mm Shelf height adjustable in a grid of ............................. : 25 mm Bay load ...................................................................... : 740 kg Top of top shelf .......................................................... : 2350 mm

Surface ........................................................................ : galvanised

Block description Number of single racks .............................................. : 6 pcs.

Number of bays type 1000 mm per rack .................... : 5 pcs Rack length ................................................................. : 8000 mm

Trolley Number of trolleys ..................................................... : 6 pcs Length of the trolleys ................................................. : 6127 mm Depth of the trolleys ................................................... : 1300 mm

Specification of the system

Railtype

The solid guide rail has a convex shape that protrudes 7 mm above the floor. The complete rail, including kerfs and drilling holes is galvanized.

Chipboard false floor

The rails will be installed in a chipboard false floor. The total height of this false floor is 40 to 50 mm above the original floor.

Plinth

A plinth is used to create a finished floor.

Ramp

To improve accessibility of the system a ramp is used.