CERP B52 Shoring Cradle Adapter Attachment Drawing.pdf
PDF 61 KB Posted
- Attached to
- B-52 Shoring Cradles and Trailers
- Solicitation number
- FA812525Q0052
About this file
This document is a technical drawing for a B-52 Shoring Cradle Adapter, likely part of the Department of the Air Force Materiel Command Air Force Sustainment Center's solicitation FA812525Q0052 for B-52 Shoring Cradles and Trailers. The drawing specifies detailed dimensional requirements, including measurements of 3.00, 3.50, 7.00, and 0.31, with annotations for manufacturing specifications.
The technical notes provide critical fabrication instructions, including: preparation following ASME Y14.100-2017 standards, dimensional tolerancing per ASME Y14.5-2018, welding requirements using SMAW, GMAW, or GTAW techniques in accordance with AWS D1.1/D1.1M:2020 for steel and D1.2/D1.2M:2014 for aluminum, and specific material requirements such as using low carbon steel for the cradle adapter. The drawing is marked as proprietary and confidential, with standard warnings against reproduction without written permission.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation Amend 1 - FA812525Q0052.pdf | ||
| CERP B52 Shoring Cradle Item Description.pdf | ||
| Solicitation - FA812525Q0052 1.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
4x 1.25
4x 1.25
THREE PLACE DECIMAL
TWO PLACE DECIMAL
A A
B B
C C
D D
Adapter Attachment
DO NOT SCALE DRAWING SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1 WEIGHT:
REVDWG. NO.
C
SIZE
TITLE:
NAME DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
INTERPRET GEOMETRIC
FINISH
APPLICATION
PROPRIETARY AND CONFIDENTIAL
MATERIAL
TOLERANCING PER:
NEXT ASSY
BEND
USED ON
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
3.00
3.50
7.00
7.00
.31
5.00
.50
R.05
4.95
1 Adapter Attachment
Notes:
1. DWG PREPARED IAW ASME Y14.100-2017 INCLUDING APPENDICIES B THRU E.
2. INTEPRET DIMENSIONING AND TOLERANCEING IAW ASME Y14.5-2018
3. ALL WELDS SHALL BE COMPLETED BY SMAW, GMAW, OR GTAW IAW AWS
D1.1D1.1M:2020 FOR STEEL, AND D1.2/D1.2M:2014 FOR ALUMINUM.
4. REMOVE ALL BURRS, SHARP EDGES, WELD BURNS, AND SPLATTER.
5. Use low carbon steel to make the cradle adapter
File details come from the government source that posted it. Updated .