Century Tech Quote 2.pdf

P: (516) 493-9800 32 Intersection Street F: (516) 485-1070 www.century-techinc.com Hempstead, NY 11550 info@century-techinc.net

CENTURY-TECH INCORPORATED

Quotation # 24-050131 May 22, 2024 Page 1 of 6

Expressly Prepared for: Naval Surface Warfare Center Indian Head

4522 McMahon Road, Bldg. 116 Indian Head, MD 20640

Model: CT-9041-1MS Solid Roll 41” Mixed Seal Servo Bag Machine

The Century-Tech Inc. Model CT-9041-1MS is equipped with state-of-the-art servo technology allowing improved productivity, reduced downtime and low-cost maintenance.

The Model CT-9041-1MS is designed to produce the highest quality bags with fastest production rates. A full color Human to Machine Interface touch screen allows ease of operation and on-the-fly adjustments in English or Spanish.

Standard Features

1) Full Machine Controls

2) Microprocessor Controlled Servo System

3) Full Color Human to Machine Interface (HMI)

4) 70” Conveyor Delivery Section.

5) 50” Synchronizing Section, T-Slot in Synchronizing Section

6) All AC Variable Frequency Drives (VFD) for Main and Capstan

7) Solid Large Diameter Draw Rollers

8) Solid Large Diameter Belt Driven Auxiliary Draw roller

9) Mixed Seal components. Dual upper and dual lower nichrome wiring sealing

10) Flying knife cut between nichrome wiring sealing, (servo driven is optional)

11) Pneumatic operation of upper draw roller lift

12) Servo Web Transportation

13) Max machine speed with 8” to 12” draw length is 100 CPM

14) Max machine speed with 56” draw length is 40 CPM

15) Main drive shaft is timing belt driven from gear reducing box.

16) Shock less Antistatic Elimination System

17) Web jam detector.

18) Standard Metal Delivery Table. (See options for Index Stacking Table)

19) Hour run time meter in touch screen (resettable from password protected screen)

20) Two (2) 120 Volts dual pulse outlets on IB side of machine independent

21) One (1) 120 Volts dual outlet, one (1) Machine run outlet on IB side of machine

22) One (1) 220 Volts 1 phase dual outlet on IB side of machine.

23) Machine color is light neutral gray, unless otherwise specified.

Machine Technical Specifications and Requirements

Machine Voltage: 220/240 Volts 3 Phases 50/60 Hertz at 50 Amps Machine Grounding: 8’ ground rod next to machine for Machine grounding.

Compressed Air: 100-PSI Maintained Air supply, with 5 Microns filtration.

Water Supply: No Water Supply in required

GENERAL MACHINE SPECIFICATIONS

The Model CT-9041-1MS is equipped with a powerful microprocessor-based servo controller for reduced scan time and fastest run speeds, the microprocessor in conjunction with the color touch screen allows the operator to do on-the-fly changes for bag size, machine speed, Programmable Limit Switches (PLS) and many other functions. All setup and run functions can be accessed through the touch screen, the powerful microprocessor in conjunction with the touch screen allows storage for up to 90 recipes that can be retrieved at any time for fast job change over and minimal down time.

Sealing Section;

Rugged precisely ground Aluminum side frames.

Web transport is achieved through servo driven large diameter lower solid draw roller (4-piece construction) center supported to minimize flexing during high-speed operation.

Solid upper draw roller (4-piece construction) center supported to minimize flexing during high-speed operation, with one pressure roller on each side.

Two (2) Shocks-less antistatic bars are located prior to draw rollers for static elimination.

Bag sealing is achieved with dual upper and lower Nichrome wires which can be utilized in a constant heat arrangement, or can be utilized in a low heat arrangement and then during sealing time can be switched to impulse sealing.

Bag cutting is achieved from top through a belt driven flying knife apparatus, using a gearbox. The cutting and sealing mechanism is automatically raised an extra 2” from operating position at machine stop through air cylinders located at each end of sealing head.

The sealing mechanism is operated through an AC 5 H.P. Variable Frequency Drive (VFD) coupled to a through the shaft gear box, outboard mounted linear shafts, bearings and low-profile high-speed lifting cams

Delivery Conveyor Section

This CT-9041-1MS is equipped with a 70” belt conveyor delivery system for bag transport. The conveyor drive is equipped with a 1.5 H.P. AC motor.

Stacking wheels’ drive is equipped with an AC 1/2 H.P. VFD motor and automatic Belt tensioning device. (Optional Servo Driven Stacking Wheels used as Bag Retarder is available)

1-CT-02475-41 Servo Pick Off and Casters Mounted to Conveyor for “Easy Access”

Two (2) antistatic bars of shock less design is located at conveyor output for static elimination.

1-CT-02441-41 Servo Stacking Wheels to be used as bag retarder.

1-CT-00334-41 Motorized Index Stacking Table

1-CT-02989 T-Slots Mounted, Dual Air Blow Down Tubes and Laydown Roller Assembly with Air Valve for 41" Mixed Sealer Machine

1-CT-02946 Large Digit Display, Synchronizing Section

The CT-9041-1MS is equipped with a 50” synchronizing section.

The synchronizing section is supplied with T-slot channels for ease of attachment mounting and removal.

A solid auxiliary draw roller is provided, the auxiliary draw roller is timing belt driven from main lower draw roller and is mounted at end of the synchronizing section, the driven auxiliary draw roller is used to minimize material stretching and web bounce in the synchronizing section during operation.

A specially designed solid dancer system is supplied to convert the required intermittent machine motion from the continuous motion from unwinding roll.

The solid dancer system is designed to handle a 56” draw length.

(Longer draw lengths can be achieved with skip draw enabled) The solid capstan roller is coupled to an AC 2 H.P. VFD motor An adjustable solid eye carriage is provided with One (1) solid state print registration scanner for accurate control of print registration.

16-CT-02133-41 Fluted Roller 41" Long with 3/4" Bearings

UNWINDING SECTION

1-CTP-0452-41 Surface Unwind for 41" Bottom Seal No Drive.

CTP-10014-80 Combination Inverse 80” Unwind and Center Folder with Edge Guiding System, Tension Control, Dual 3” air shafts, Pinpoint Gusseting.

Standard Features

1) Fife Electronic Edge Guiding Control System, for accurate edge guiding with quick response.

2) Dual roll capability; Allows one roll to be used in production while the second roll is being prepared allowing for minimum down time.

3) Common Frame set up; Unwind and Center Folder are mounted on one common frame for ease of set up.

4) Lip Plus/Lip Minus; Unwind has electrically operated Lip plus/Lip Minus adjustment for fast and easy set up.

5) Web In/Web Out; Unwind has electrically operated Web In/Web Out adjustment for fast and easy set up.

6) Tensioning System; The CTP-10014 Unwind is equipped with a Warner Tension control system, switch selectable for upper or lower station control.

7) Dancer Control; A dancer assembly with 2 rollers is used in conjunction with a manually settable air pressure regulator to set proper tension desired.

8) Pinpoint Gusseting; Pinpoint gusseter is supplied with plates ranging from 0” to 7” for no gusset to a maximum of 3.5” gusset.

SERVICE EXPENSES

Installation and Training 5 Days Total, all included with airfare, hotel, car rental.

Shipping to Oklahoma Included in machine price, using exclusive air ride truck.

Machine delivery time:

Delivery is 5-6 months from receipt of signed P.O. and down payment.

1-CT-9041-1MS New 41” Solid Roll Mixed Seal Servo Machine as Quoted above (Ex-Works) Hempstead NY, is U.S. funds $ 311,000.00

Payment terms are as follows unless otherwise stated in writing:

45% down payment with signed Purchase Order $ 45% upon machine completion and prior to shipping $ 10% 30 days from machine shipping $

Terms and Conditions

Price/Payment:

All prices quoted by Century-Tech Inc. are subject to change, unless accompanied by a signed, dated, written proposal, this proposal shall expire 30 days from above date.

In the event the Customer requests additional items or changes to this proposal after the original contract is executed, all changes must be in writing and agreed by both parties, Any changes may incur additional charges to the customer.

All prices are in U.S. dollars and are Ex-Works Hempstead, NY Buyer is responsible for all rigging and shipping charges and is not included herein.

Any additional charges or taxes during delivery are the sole responsibility of buyer.

Offer and Acceptance:

This agreement is considered binding only if both Century-Tech Inc. and the Buyer have signed this agreement, this agreement is binding to the extent that there ere no other written amendments subsequent to this agreement.

Acceptance will take place at Century-Tech’s Inc Facility in Hempstead, NY

Machine testing:

In order to fully test the machine at Century-tech’s Inc Facility, the buyer shall furnish a minimum of 4 rolls of material (2 clear and 2 printed) equivalent in quality to the web stock that will run on production runs at Customers plant.

The material shall be shipped freight pre-paid by Customer.

Installation and Training:

Installation and training are included in this proposal, 5 days total.

The Customer is responsible for unpacking and connecting machine to all utilities prior to technician’s arrival.

WARRANTY and Liability:

Machine parts are warranted for Six (6) Months against manufacturing defects and workmanship, Warranty items manufactured by seller will be repaired or replaced at our discression and will be shipped at Customers expenses.

Warranty items not manufactured by seller will be repaired or replaced at our discression and will be shipped at Customers expenses, and liability of the seller is limited to manufacturer’s warranty.

The purchaser agrees to indemnify and hold seller harmless from all claims, actions or demands arising out of or in any way connected to the operation of the items covered by this agreement.

Buyer agrees to keep in place and not to remove, tamper or modify any or all safety devices that are manufactured into or included with the machine.

Buyer agrees to keep in legible condition all warning signs or instructions affixed to machine. The seller will not be held responsible for any actions arising from failure to comply with above specifications. Operator safety is our main concern and the machine has so been manufactured. If there are any additional safety regulations that must be adhered to, it is the responsibility of the buyer to inform the seller in writing of such regulations and changes, the seller shall not be liable for any consequential damage, loss, or profit loss as a result of breach of any of the obligations of the seller under this agreement.

All obligations and warranties in this agreement shall cease in case the covered machine and affiliated attachments are sold, leased or transferred to another party.

In case of such event the remaining warranty can be transferred to third party only if agreed by and signed by an officer of Century-Tech Inc.

Buyer: __________________________________________Date: _____________

Seller: __________________________________________Date: _____________

Purchase Order Number: __________________________