CED 1G23 Grab n go dual sided.pdf
PDF 196 KB Posted
- Attached to
- Dual-Sided Grab N Go Case
- Solicitation number
- HQC00426QE031
- Issued by
-
Defense Commissary Agency
About this file
This document is a Minimal Acceptable Standards specification for equipment procurement by the CED Grocery Department. The specification defines requirements for a 1G23 Merchandiser grab-n-go dual-sided refrigerated display unit, Federal Supply Class 4110, used to display self-service refrigerated grab-n-go products. The equipment must measure 50 inches long/wide by 35 inches deep by 72 inches high, with dimensional tolerance of no more than 3 inches in any direction.
The merchandiser must include an evaporation pan, LED lighting, adjustable temperature controls, adjustable shelving, wrap-around bumper, clear view ends, night shades, and a minimum of 3 shelves. The unit must be UL-listed and NSF-certified, conform to EPA Clean Air Act Section 612 and SNAP requirements, and use CFC-free refrigerants (R290, R744, or R600a are preferred; R134a, R404A, R410, and HCFC22 are acceptable only until January 1, 2019). The exterior color must be #747 Chocolate Brown and the interior #701 shadow black. Standard electrical requirements are 208 volts, 60 Hertz, single phase for U.S.A. locations, with alternative specifications for Pacific Theater stores (220V/50HZ) and European stores. The equipment must include a minimum 6-foot cord with NEMA Standard plug, ship ready to assemble and use, and include installation instructions, parts list, and service point of contact. A one-year warranty covering defective materials and workmanship is required, along with continued parts support for the projected equipment life cycle plus 5 years.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
INITIATED
11/15/16
CED
GROCERY DEPARTMENT
Minimal Acceptable Standards
REVISION
03/09/20
1G23 Merchandiser, grab-n-go dual sided PAGE 2 of 4
FY16r.01
1 Purpose of this Equipment: To display self-service refrigerated grab-n-go products.
2 Federal Supply Class: 4110
3 General Operating Specifications:
3.1 Dimensions:
3.1.1 50 inches long / wide, 35 inches deep, 72 inches high. Dimensional sizes, such as length, width, and height may vary no more than 3 inches in any direction.
3.2 Salient Characteristics that shall be provided:
3.2.1 Evaporation pan.
3.2.2 LED lighting.
3.2.3 Adjustable temperature controls.
3.2.4 Adjustable shelving.
3.2.5 Wrap around bumper.
3.2.6 Clear view ends.
3.2.7 Night Shades.
3.2.8 Minimum 3 shelves.
3.3 Industry Standards / Requirement(s):
3.3.1 Industry Standards: Underwriters Laboratory (UL) listed and National
Sanitation Foundation (NSF) certification, or approved equivalent.
Conformité Européene (CE) is not acceptable for a standard.
3.3.2 Must conform to Section 612 of the Clean Air Act and the EPA’s Significant New Alternatives Policy (SNAP). Chlorofluorocarbon (CFC) free, type R290 (Propane), R744 (Co2), R600a (Isobutane) refrigerants are acceptable. (Refrigerants R134a, R404A, R410 and HCFC22 will be acceptable only until 1 January 2019.
3.3.3 Warranty period shall be for (1) year from date of delivery against defective material and workmanship and shall include parts, service and labor.
3.4 Information Technology requirements: N / A
3.5 Color Requirement(s): Exterior color to be # 747 Chocolate Brown. Interior color to be #701 shadow black.
REVISION
1G23 Merchandiser, grab-n-go dual sided PAGE 3 of 4
4 Electrical Requirements:
4.1 Standard U.S.A. electrical specifications: 208 volts, 60 Hertz, 1 phases.
4.2 _____ Pacific Theater stores 220V / 50 HZ / 1 PH (Applies to these stores only:
Atsugi, Misawa, Sagami, Sagamihara, Yokosuka, Yokota, Camp Zama, and Kanto Plains CDC. All other stores are standard U.S.A. 60 cycle voltages.)
4.3 _____ European stores 220 V / 50 HZ / 1 PH
4.4 Minimum 6 foot cord with a NEMA Standard plug, or a manufacturer’s equivalent to comply with the equipment plug in requirements.
4.5 NOTE: the operating range for 120 volts is 110 to 120 volts; the operating range for
220 volts is 208 to 230 volts.
5 Standard Contractor Requirements:
5.1 Must be shipped ready to assemble, plug in, and use.
5.2 This equipment requires disposal:
5.2.1 Must be disposed of in accordance with EPA and clean air act requirements for refrigerant.
5.3 Information to be provided by the Contractor to the commissary at the time of delivery:
5.3.1 Point of Contact for Service
5.3.2 Installation and Operating Instructions
5.3.3 Parts List
5.4 Maintenance Sustainability Requirements: Continued parts support is required for the projected life cycle of the equipment plus 5 years.
6 Special Coordinating / Safety Instructions: N / A
REVISION
1G23 Merchandiser, grab-n-go dual sided PAGE 4 of 4
STORE ORDER REQUEST
STORE NAME: __________________________ DODAAC: ____________________
QUANTITY: _______
| 3.5 Changed colors to Chocolate brown and Shadow Black |
| 1 Purpose of this Equipment: To display self-service refrigerated grab-n-go products. |
| 3.3 Industry Standards / Requirement(s): |
| 3.5 Color Requirement(s): Exterior color to be # 747 Chocolate Brown. Interior color to be #701 shadow black. |
| 4.1 Standard U.S.A. electrical specifications: 208 volts, 60 Hertz, 1 phases. |
| 4.2 _____ Pacific Theater stores 220V / 50 HZ / 1 PH (Applies to these stores only: Atsugi, Misawa, Sagami, Sagamihara, Yokosuka, Yokota, Camp Zama, and Kanto Plains CDC. All other stores are standard U.S.A. 60 cycle voltages.) |
| 4.3 _____ European stores 220 V / 50 HZ / 1 PH |
| 4.4 Minimum 6 foot cord with a NEMA Standard plug, or a manufacturer’s equivalent to comply with the equipment plug in requirements. |
| 4.5 NOTE: the operating range for 120 volts is 110 to 120 volts; the operating range for 220 volts is 208 to 230 volts. |
| 5 Standard Contractor Requirements: |
| 6 Special Coordinating / Safety Instructions: N / A |
File details come from the government source that posted it. Updated .